fa1e6a8aec
Codify using a named clock for the refclk of the uart. This makes it easier if we might need to add a gating clock (like present on the BCM6345). Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-mips@linux-mips.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-serial@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Patchwork: https://patchwork.linux-mips.org/patch/17328/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Hogan <jhogan@kernel.org>
37 lines
660 B
Plaintext
37 lines
660 B
Plaintext
* BCM63xx UART
|
|
|
|
Required properties:
|
|
|
|
- compatible: "brcm,bcm6345-uart"
|
|
|
|
- reg: The base address of the UART register bank.
|
|
|
|
- interrupts: A single interrupt specifier.
|
|
|
|
- clocks: Clock driving the hardware; used to figure out the baud rate
|
|
divisor.
|
|
|
|
|
|
Optional properties:
|
|
|
|
- clock-names: Should be "refclk".
|
|
|
|
Example:
|
|
|
|
uart0: serial@14e00520 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0x14e00520 0x18>;
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <2>;
|
|
clocks = <&periph_clk>;
|
|
clock-names = "refclk";
|
|
};
|
|
|
|
clocks {
|
|
periph_clk: periph_clk@0 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <54000000>;
|
|
};
|
|
};
|