c125ca0918
XAUI allows XGMII to reach an extended distance by using a XGXS layer at each end of the MAC to PHY link, operating over four Serdes lanes. 10GBASE-KR is a single lane Serdes backplane ethernet connection method with autonegotiation on the link. Some PHYs use this to connect to the ethernet interface at 10G speeds, switching to other connection types when utilising slower speeds. 10GBASE-KR is also used for XFI and SFI to connect to XFP and SFP fiber modules. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
37 lines
1.1 KiB
Plaintext
37 lines
1.1 KiB
Plaintext
What: /sys/class/mdio_bus/<bus>/<device>/attached_dev
|
|
Date: May 2017
|
|
KernelVersion: 4.13
|
|
Contact: netdev@vger.kernel.org
|
|
Description:
|
|
Symbolic link to the network device this PHY device is
|
|
attached to.
|
|
|
|
What: /sys/class/mdio_bus/<bus>/<device>/phy_has_fixups
|
|
Date: February 2014
|
|
KernelVersion: 3.15
|
|
Contact: netdev@vger.kernel.org
|
|
Description:
|
|
Boolean value indicating whether the PHY device has
|
|
any fixups registered against it (phy_register_fixup)
|
|
|
|
What: /sys/class/mdio_bus/<bus>/<device>/phy_id
|
|
Date: November 2012
|
|
KernelVersion: 3.8
|
|
Contact: netdev@vger.kernel.org
|
|
Description:
|
|
32-bit hexadecimal value corresponding to the PHY device's OUI,
|
|
model and revision number.
|
|
|
|
What: /sys/class/mdio_bus/<bus>/<device>/phy_interface
|
|
Date: February 2014
|
|
KernelVersion: 3.15
|
|
Contact: netdev@vger.kernel.org
|
|
Description:
|
|
String value indicating the PHY interface, possible
|
|
values are:.
|
|
<empty> (not available), mii, gmii, sgmii, tbi, rev-mii,
|
|
rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
|
|
xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui,
|
|
xaui, 10gbase-kr, unknown
|
|
|