Andrew Lunn c047a1f918 dsa: mv88e6xxx: Enable forwarding for unknown to the CPU port ...

Frames destined to an unknown address must be forwarded to the CPU
port. Otherwise incoming ARP, dhcp leases, etc, do not work.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

2015-09-29 21:06:51 -07:00

..

bcm_sf2_regs.h

net: dsa: bcm_sf2: add HW bridging support

2015-02-25 17:03:38 -05:00

bcm_sf2.c

net: dsa: bcm_sf2: Fix ageing conditions and operation

2015-09-08 22:27:35 -07:00

bcm_sf2.h

net: dsa: bcm_sf2: Fix 64-bits register writes

2015-09-09 14:14:22 -07:00

Kconfig

dsa: mv88e6352/mv88e6xxx: Add support for Marvell 88E6320 and 88E6321

2015-07-09 14:34:23 -07:00

Makefile

net: dsa: Add support for Marvell 88E6352

2014-10-30 14:54:10 -04:00

mv88e6xxx.c

dsa: mv88e6xxx: Enable forwarding for unknown to the CPU port

2015-09-29 21:06:51 -07:00

mv88e6xxx.h

dsa: mv88e6xxx: Set the RGMII delay based on phy interface

2015-08-31 14:48:02 -07:00

mv88e6060.c

net: dsa: Report known silicon revisions for Marvell 88E6060

2014-10-30 14:54:10 -04:00

mv88e6123_61_65.c

dsa: mv88e6xxx: Allow speed/duplex of port to be configured

2015-08-31 14:48:01 -07:00

mv88e6131.c

dsa: mv88e6xxx: Allow speed/duplex of port to be configured

2015-08-31 14:48:01 -07:00

mv88e6171.c

net: dsa: mv88e6171: add hardware 802.1Q support

2015-09-06 19:50:50 -07:00

mv88e6352.c

dsa: mv88e6xxx: Allow speed/duplex of port to be configured

2015-08-31 14:48:01 -07:00