linux/drivers/usb
Johan Hovold 537b8a8695 Revert "USB: serial: add Moxa UPORT 11x0 driver"
This reverts commit 0b2b093ad4.

Turns out the MOXA vendor driver was basically just a copy of the
ti_usb_3410_5052 driver. We don't want two drivers for the same chip
even if mxu11x0 had gotten some much needed clean up before merge. So
let's remove the mxu11x0 driver, add support for these Moxa devices to
the TI driver, and then clean that driver up instead.

Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-01 11:01:33 +01:00
..
atm USB: atm: cxacru: fix blank line after declaration 2015-07-22 14:55:22 -07:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea usb: chipidea: fix return value check in ci_hdrc_pci_probe() 2016-02-19 14:13:44 +08:00
class cdc-acm:exclude Samsung phone 04e8:685d 2016-01-24 21:06:21 -08:00
common usb: of: add an api to get dr_mode by the phy node 2015-12-15 09:12:41 -06:00
core Revert "usb: hub: do not clear BOS field during reset device" 2016-02-20 14:19:34 -08:00
dwc2 usb: dwc2: USB_DWC2 should depend on HAS_DMA 2016-02-17 10:32:18 +02:00
dwc3 usb: dwc3: Fix assignment of EP transfer resources 2016-02-17 10:31:53 +02:00
early
gadget usb: gadget: net2280: fix endpoint max packet for super speed connections 2016-02-23 08:51:38 +02:00
host xhci: harden xhci_find_next_ext_cap against device removal 2016-02-04 17:00:10 -08:00
image scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
isp1760 usb: isp1760: udc: add ep capabilities support 2015-08-04 12:26:55 -05:00
misc USB patches for 4.5-rc1 2016-01-13 09:26:40 -08:00
mon USB: usbmon: remove assignment from IS_ERR argument 2016-01-03 16:55:59 -08:00
musb usb: musb: fix DMA for host mode 2016-02-23 08:51:38 +02:00
phy usb: phy: msm: Trigger USB state detection work in DRD mode 2016-02-23 08:51:38 +02:00
renesas_usbhs usb: renesas_usbhs: add fallback compatibility strings 2015-12-16 10:53:51 -06:00
serial Revert "USB: serial: add Moxa UPORT 11x0 driver" 2016-03-01 11:01:33 +01:00
storage Merge 4.4-rc5 into usb-next as we want those fixes here for testing 2015-12-13 19:20:27 -08:00
usbip usbip: vhci_hcd: at unlink, return -EIDRM if vhci_rx took the urb 2015-10-04 10:59:03 +01:00
wusbcore wusbcore: rh: use USB_DT_HUB 2015-04-03 19:03:15 +02:00
Kconfig
Makefile usb-host: Remove fusbh200 driver 2015-10-16 23:44:33 -07:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.