537fba2892
This implements the following idea: On Monday 30 January 2006 19:22, Eric W. Biederman wrote: > One piece missing from this conversation is the issue that we need errors > in a uniform format. That is why edac_mc has helper functions. > > However there will always be errors that don't fit any particular model. > Could we add a edac_printk(dev, ); That is similar to dev_printk but > prints out an EDAC header and the device on which the error was found? > Letting the rest of the string be user specified. > > For actual control that interface may be to blunt, but at least for people > looking in the logs it allows all of the errors to be detected and > harvested. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
565 lines
14 KiB
C
565 lines
14 KiB
C
/*
|
|
* Intel e7xxx Memory Controller kernel module
|
|
* (C) 2003 Linux Networx (http://lnxi.com)
|
|
* This file may be distributed under the terms of the
|
|
* GNU General Public License.
|
|
*
|
|
* See "enum e7xxx_chips" below for supported chipsets
|
|
*
|
|
* Written by Thayne Harbaugh
|
|
* Based on work by Dan Hollis <goemon at anime dot net> and others.
|
|
* http://www.anime.net/~goemon/linux-ecc/
|
|
*
|
|
* Contributors:
|
|
* Eric Biederman (Linux Networx)
|
|
* Tom Zimmerman (Linux Networx)
|
|
* Jim Garlick (Lawrence Livermore National Labs)
|
|
* Dave Peterson (Lawrence Livermore National Labs)
|
|
* That One Guy (Some other place)
|
|
* Wang Zhenyu (intel.com)
|
|
*
|
|
* $Id: edac_e7xxx.c,v 1.5.2.9 2005/10/05 00:43:44 dsp_llnl Exp $
|
|
*
|
|
*/
|
|
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_ids.h>
|
|
#include <linux/slab.h>
|
|
#include "edac_mc.h"
|
|
|
|
|
|
#define e7xxx_printk(level, fmt, arg...) \
|
|
edac_printk(level, "e7xxx", fmt, ##arg)
|
|
|
|
|
|
#define e7xxx_mc_printk(mci, level, fmt, arg...) \
|
|
edac_mc_chipset_printk(mci, level, "e7xxx", fmt, ##arg)
|
|
|
|
|
|
#ifndef PCI_DEVICE_ID_INTEL_7205_0
|
|
#define PCI_DEVICE_ID_INTEL_7205_0 0x255d
|
|
#endif /* PCI_DEVICE_ID_INTEL_7205_0 */
|
|
|
|
#ifndef PCI_DEVICE_ID_INTEL_7205_1_ERR
|
|
#define PCI_DEVICE_ID_INTEL_7205_1_ERR 0x2551
|
|
#endif /* PCI_DEVICE_ID_INTEL_7205_1_ERR */
|
|
|
|
#ifndef PCI_DEVICE_ID_INTEL_7500_0
|
|
#define PCI_DEVICE_ID_INTEL_7500_0 0x2540
|
|
#endif /* PCI_DEVICE_ID_INTEL_7500_0 */
|
|
|
|
#ifndef PCI_DEVICE_ID_INTEL_7500_1_ERR
|
|
#define PCI_DEVICE_ID_INTEL_7500_1_ERR 0x2541
|
|
#endif /* PCI_DEVICE_ID_INTEL_7500_1_ERR */
|
|
|
|
#ifndef PCI_DEVICE_ID_INTEL_7501_0
|
|
#define PCI_DEVICE_ID_INTEL_7501_0 0x254c
|
|
#endif /* PCI_DEVICE_ID_INTEL_7501_0 */
|
|
|
|
#ifndef PCI_DEVICE_ID_INTEL_7501_1_ERR
|
|
#define PCI_DEVICE_ID_INTEL_7501_1_ERR 0x2541
|
|
#endif /* PCI_DEVICE_ID_INTEL_7501_1_ERR */
|
|
|
|
#ifndef PCI_DEVICE_ID_INTEL_7505_0
|
|
#define PCI_DEVICE_ID_INTEL_7505_0 0x2550
|
|
#endif /* PCI_DEVICE_ID_INTEL_7505_0 */
|
|
|
|
#ifndef PCI_DEVICE_ID_INTEL_7505_1_ERR
|
|
#define PCI_DEVICE_ID_INTEL_7505_1_ERR 0x2551
|
|
#endif /* PCI_DEVICE_ID_INTEL_7505_1_ERR */
|
|
|
|
|
|
#define E7XXX_NR_CSROWS 8 /* number of csrows */
|
|
#define E7XXX_NR_DIMMS 8 /* FIXME - is this correct? */
|
|
|
|
|
|
/* E7XXX register addresses - device 0 function 0 */
|
|
#define E7XXX_DRB 0x60 /* DRAM row boundary register (8b) */
|
|
#define E7XXX_DRA 0x70 /* DRAM row attribute register (8b) */
|
|
/*
|
|
* 31 Device width row 7 0=x8 1=x4
|
|
* 27 Device width row 6
|
|
* 23 Device width row 5
|
|
* 19 Device width row 4
|
|
* 15 Device width row 3
|
|
* 11 Device width row 2
|
|
* 7 Device width row 1
|
|
* 3 Device width row 0
|
|
*/
|
|
#define E7XXX_DRC 0x7C /* DRAM controller mode reg (32b) */
|
|
/*
|
|
* 22 Number channels 0=1,1=2
|
|
* 19:18 DRB Granularity 32/64MB
|
|
*/
|
|
#define E7XXX_TOLM 0xC4 /* DRAM top of low memory reg (16b) */
|
|
#define E7XXX_REMAPBASE 0xC6 /* DRAM remap base address reg (16b) */
|
|
#define E7XXX_REMAPLIMIT 0xC8 /* DRAM remap limit address reg (16b) */
|
|
|
|
/* E7XXX register addresses - device 0 function 1 */
|
|
#define E7XXX_DRAM_FERR 0x80 /* DRAM first error register (8b) */
|
|
#define E7XXX_DRAM_NERR 0x82 /* DRAM next error register (8b) */
|
|
#define E7XXX_DRAM_CELOG_ADD 0xA0 /* DRAM first correctable memory */
|
|
/* error address register (32b) */
|
|
/*
|
|
* 31:28 Reserved
|
|
* 27:6 CE address (4k block 33:12)
|
|
* 5:0 Reserved
|
|
*/
|
|
#define E7XXX_DRAM_UELOG_ADD 0xB0 /* DRAM first uncorrectable memory */
|
|
/* error address register (32b) */
|
|
/*
|
|
* 31:28 Reserved
|
|
* 27:6 CE address (4k block 33:12)
|
|
* 5:0 Reserved
|
|
*/
|
|
#define E7XXX_DRAM_CELOG_SYNDROME 0xD0 /* DRAM first correctable memory */
|
|
/* error syndrome register (16b) */
|
|
|
|
enum e7xxx_chips {
|
|
E7500 = 0,
|
|
E7501,
|
|
E7505,
|
|
E7205,
|
|
};
|
|
|
|
|
|
struct e7xxx_pvt {
|
|
struct pci_dev *bridge_ck;
|
|
u32 tolm;
|
|
u32 remapbase;
|
|
u32 remaplimit;
|
|
const struct e7xxx_dev_info *dev_info;
|
|
};
|
|
|
|
|
|
struct e7xxx_dev_info {
|
|
u16 err_dev;
|
|
const char *ctl_name;
|
|
};
|
|
|
|
|
|
struct e7xxx_error_info {
|
|
u8 dram_ferr;
|
|
u8 dram_nerr;
|
|
u32 dram_celog_add;
|
|
u16 dram_celog_syndrome;
|
|
u32 dram_uelog_add;
|
|
};
|
|
|
|
static const struct e7xxx_dev_info e7xxx_devs[] = {
|
|
[E7500] = {
|
|
.err_dev = PCI_DEVICE_ID_INTEL_7500_1_ERR,
|
|
.ctl_name = "E7500"},
|
|
[E7501] = {
|
|
.err_dev = PCI_DEVICE_ID_INTEL_7501_1_ERR,
|
|
.ctl_name = "E7501"},
|
|
[E7505] = {
|
|
.err_dev = PCI_DEVICE_ID_INTEL_7505_1_ERR,
|
|
.ctl_name = "E7505"},
|
|
[E7205] = {
|
|
.err_dev = PCI_DEVICE_ID_INTEL_7205_1_ERR,
|
|
.ctl_name = "E7205"},
|
|
};
|
|
|
|
|
|
/* FIXME - is this valid for both SECDED and S4ECD4ED? */
|
|
static inline int e7xxx_find_channel(u16 syndrome)
|
|
{
|
|
debugf3("%s()\n", __func__);
|
|
|
|
if ((syndrome & 0xff00) == 0)
|
|
return 0;
|
|
if ((syndrome & 0x00ff) == 0)
|
|
return 1;
|
|
if ((syndrome & 0xf000) == 0 || (syndrome & 0x0f00) == 0)
|
|
return 0;
|
|
return 1;
|
|
}
|
|
|
|
|
|
static unsigned long
|
|
ctl_page_to_phys(struct mem_ctl_info *mci, unsigned long page)
|
|
{
|
|
u32 remap;
|
|
struct e7xxx_pvt *pvt = (struct e7xxx_pvt *) mci->pvt_info;
|
|
|
|
debugf3("%s()\n", __func__);
|
|
|
|
if ((page < pvt->tolm) ||
|
|
((page >= 0x100000) && (page < pvt->remapbase)))
|
|
return page;
|
|
remap = (page - pvt->tolm) + pvt->remapbase;
|
|
if (remap < pvt->remaplimit)
|
|
return remap;
|
|
e7xxx_printk(KERN_ERR, "Invalid page %lx - out of range\n", page);
|
|
return pvt->tolm - 1;
|
|
}
|
|
|
|
|
|
static void process_ce(struct mem_ctl_info *mci, struct e7xxx_error_info *info)
|
|
{
|
|
u32 error_1b, page;
|
|
u16 syndrome;
|
|
int row;
|
|
int channel;
|
|
|
|
debugf3("%s()\n", __func__);
|
|
|
|
/* read the error address */
|
|
error_1b = info->dram_celog_add;
|
|
/* FIXME - should use PAGE_SHIFT */
|
|
page = error_1b >> 6; /* convert the address to 4k page */
|
|
/* read the syndrome */
|
|
syndrome = info->dram_celog_syndrome;
|
|
/* FIXME - check for -1 */
|
|
row = edac_mc_find_csrow_by_page(mci, page);
|
|
/* convert syndrome to channel */
|
|
channel = e7xxx_find_channel(syndrome);
|
|
edac_mc_handle_ce(mci, page, 0, syndrome, row, channel,
|
|
"e7xxx CE");
|
|
}
|
|
|
|
|
|
static void process_ce_no_info(struct mem_ctl_info *mci)
|
|
{
|
|
debugf3("%s()\n", __func__);
|
|
edac_mc_handle_ce_no_info(mci, "e7xxx CE log register overflow");
|
|
}
|
|
|
|
|
|
static void process_ue(struct mem_ctl_info *mci, struct e7xxx_error_info *info)
|
|
{
|
|
u32 error_2b, block_page;
|
|
int row;
|
|
|
|
debugf3("%s()\n", __func__);
|
|
|
|
/* read the error address */
|
|
error_2b = info->dram_uelog_add;
|
|
/* FIXME - should use PAGE_SHIFT */
|
|
block_page = error_2b >> 6; /* convert to 4k address */
|
|
row = edac_mc_find_csrow_by_page(mci, block_page);
|
|
edac_mc_handle_ue(mci, block_page, 0, row, "e7xxx UE");
|
|
}
|
|
|
|
|
|
static void process_ue_no_info(struct mem_ctl_info *mci)
|
|
{
|
|
debugf3("%s()\n", __func__);
|
|
edac_mc_handle_ue_no_info(mci, "e7xxx UE log register overflow");
|
|
}
|
|
|
|
|
|
static void e7xxx_get_error_info (struct mem_ctl_info *mci,
|
|
struct e7xxx_error_info *info)
|
|
{
|
|
struct e7xxx_pvt *pvt;
|
|
|
|
pvt = (struct e7xxx_pvt *) mci->pvt_info;
|
|
pci_read_config_byte(pvt->bridge_ck, E7XXX_DRAM_FERR,
|
|
&info->dram_ferr);
|
|
pci_read_config_byte(pvt->bridge_ck, E7XXX_DRAM_NERR,
|
|
&info->dram_nerr);
|
|
|
|
if ((info->dram_ferr & 1) || (info->dram_nerr & 1)) {
|
|
pci_read_config_dword(pvt->bridge_ck, E7XXX_DRAM_CELOG_ADD,
|
|
&info->dram_celog_add);
|
|
pci_read_config_word(pvt->bridge_ck,
|
|
E7XXX_DRAM_CELOG_SYNDROME, &info->dram_celog_syndrome);
|
|
}
|
|
|
|
if ((info->dram_ferr & 2) || (info->dram_nerr & 2))
|
|
pci_read_config_dword(pvt->bridge_ck, E7XXX_DRAM_UELOG_ADD,
|
|
&info->dram_uelog_add);
|
|
|
|
if (info->dram_ferr & 3)
|
|
pci_write_bits8(pvt->bridge_ck, E7XXX_DRAM_FERR, 0x03,
|
|
0x03);
|
|
|
|
if (info->dram_nerr & 3)
|
|
pci_write_bits8(pvt->bridge_ck, E7XXX_DRAM_NERR, 0x03,
|
|
0x03);
|
|
}
|
|
|
|
|
|
static int e7xxx_process_error_info (struct mem_ctl_info *mci,
|
|
struct e7xxx_error_info *info, int handle_errors)
|
|
{
|
|
int error_found;
|
|
|
|
error_found = 0;
|
|
|
|
/* decode and report errors */
|
|
if (info->dram_ferr & 1) { /* check first error correctable */
|
|
error_found = 1;
|
|
|
|
if (handle_errors)
|
|
process_ce(mci, info);
|
|
}
|
|
|
|
if (info->dram_ferr & 2) { /* check first error uncorrectable */
|
|
error_found = 1;
|
|
|
|
if (handle_errors)
|
|
process_ue(mci, info);
|
|
}
|
|
|
|
if (info->dram_nerr & 1) { /* check next error correctable */
|
|
error_found = 1;
|
|
|
|
if (handle_errors) {
|
|
if (info->dram_ferr & 1)
|
|
process_ce_no_info(mci);
|
|
else
|
|
process_ce(mci, info);
|
|
}
|
|
}
|
|
|
|
if (info->dram_nerr & 2) { /* check next error uncorrectable */
|
|
error_found = 1;
|
|
|
|
if (handle_errors) {
|
|
if (info->dram_ferr & 2)
|
|
process_ue_no_info(mci);
|
|
else
|
|
process_ue(mci, info);
|
|
}
|
|
}
|
|
|
|
return error_found;
|
|
}
|
|
|
|
|
|
static void e7xxx_check(struct mem_ctl_info *mci)
|
|
{
|
|
struct e7xxx_error_info info;
|
|
|
|
debugf3("%s()\n", __func__);
|
|
e7xxx_get_error_info(mci, &info);
|
|
e7xxx_process_error_info(mci, &info, 1);
|
|
}
|
|
|
|
|
|
static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx)
|
|
{
|
|
int rc = -ENODEV;
|
|
int index;
|
|
u16 pci_data;
|
|
struct mem_ctl_info *mci = NULL;
|
|
struct e7xxx_pvt *pvt = NULL;
|
|
u32 drc;
|
|
int drc_chan = 1; /* Number of channels 0=1chan,1=2chan */
|
|
int drc_drbg = 1; /* DRB granularity 0=32mb,1=64mb */
|
|
int drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */
|
|
u32 dra;
|
|
unsigned long last_cumul_size;
|
|
|
|
|
|
debugf0("%s(): mci\n", __func__);
|
|
|
|
/* need to find out the number of channels */
|
|
pci_read_config_dword(pdev, E7XXX_DRC, &drc);
|
|
/* only e7501 can be single channel */
|
|
if (dev_idx == E7501) {
|
|
drc_chan = ((drc >> 22) & 0x1);
|
|
drc_drbg = (drc >> 18) & 0x3;
|
|
}
|
|
drc_ddim = (drc >> 20) & 0x3;
|
|
|
|
mci = edac_mc_alloc(sizeof(*pvt), E7XXX_NR_CSROWS, drc_chan + 1);
|
|
|
|
if (mci == NULL) {
|
|
rc = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
debugf3("%s(): init mci\n", __func__);
|
|
|
|
mci->mtype_cap = MEM_FLAG_RDDR;
|
|
mci->edac_ctl_cap =
|
|
EDAC_FLAG_NONE | EDAC_FLAG_SECDED | EDAC_FLAG_S4ECD4ED;
|
|
/* FIXME - what if different memory types are in different csrows? */
|
|
mci->mod_name = BS_MOD_STR;
|
|
mci->mod_ver = "$Revision: 1.5.2.9 $";
|
|
mci->pdev = pdev;
|
|
|
|
debugf3("%s(): init pvt\n", __func__);
|
|
pvt = (struct e7xxx_pvt *) mci->pvt_info;
|
|
pvt->dev_info = &e7xxx_devs[dev_idx];
|
|
pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
|
|
pvt->dev_info->err_dev,
|
|
pvt->bridge_ck);
|
|
if (!pvt->bridge_ck) {
|
|
e7xxx_printk(KERN_ERR, "error reporting device not found:"
|
|
"vendor %x device 0x%x (broken BIOS?)\n",
|
|
PCI_VENDOR_ID_INTEL,
|
|
e7xxx_devs[dev_idx].err_dev);
|
|
goto fail;
|
|
}
|
|
|
|
debugf3("%s(): more mci init\n", __func__);
|
|
mci->ctl_name = pvt->dev_info->ctl_name;
|
|
|
|
mci->edac_check = e7xxx_check;
|
|
mci->ctl_page_to_phys = ctl_page_to_phys;
|
|
|
|
/* find out the device types */
|
|
pci_read_config_dword(pdev, E7XXX_DRA, &dra);
|
|
|
|
/*
|
|
* The dram row boundary (DRB) reg values are boundary address
|
|
* for each DRAM row with a granularity of 32 or 64MB (single/dual
|
|
* channel operation). DRB regs are cumulative; therefore DRB7 will
|
|
* contain the total memory contained in all eight rows.
|
|
*/
|
|
for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
|
|
u8 value;
|
|
u32 cumul_size;
|
|
/* mem_dev 0=x8, 1=x4 */
|
|
int mem_dev = (dra >> (index * 4 + 3)) & 0x1;
|
|
struct csrow_info *csrow = &mci->csrows[index];
|
|
|
|
pci_read_config_byte(mci->pdev, E7XXX_DRB + index, &value);
|
|
/* convert a 64 or 32 MiB DRB to a page size. */
|
|
cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
|
|
debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
|
|
cumul_size);
|
|
if (cumul_size == last_cumul_size)
|
|
continue; /* not populated */
|
|
|
|
csrow->first_page = last_cumul_size;
|
|
csrow->last_page = cumul_size - 1;
|
|
csrow->nr_pages = cumul_size - last_cumul_size;
|
|
last_cumul_size = cumul_size;
|
|
csrow->grain = 1 << 12; /* 4KiB - resolution of CELOG */
|
|
csrow->mtype = MEM_RDDR; /* only one type supported */
|
|
csrow->dtype = mem_dev ? DEV_X4 : DEV_X8;
|
|
|
|
/*
|
|
* if single channel or x8 devices then SECDED
|
|
* if dual channel and x4 then S4ECD4ED
|
|
*/
|
|
if (drc_ddim) {
|
|
if (drc_chan && mem_dev) {
|
|
csrow->edac_mode = EDAC_S4ECD4ED;
|
|
mci->edac_cap |= EDAC_FLAG_S4ECD4ED;
|
|
} else {
|
|
csrow->edac_mode = EDAC_SECDED;
|
|
mci->edac_cap |= EDAC_FLAG_SECDED;
|
|
}
|
|
} else
|
|
csrow->edac_mode = EDAC_NONE;
|
|
}
|
|
|
|
mci->edac_cap |= EDAC_FLAG_NONE;
|
|
|
|
debugf3("%s(): tolm, remapbase, remaplimit\n", __func__);
|
|
/* load the top of low memory, remap base, and remap limit vars */
|
|
pci_read_config_word(mci->pdev, E7XXX_TOLM, &pci_data);
|
|
pvt->tolm = ((u32) pci_data) << 4;
|
|
pci_read_config_word(mci->pdev, E7XXX_REMAPBASE, &pci_data);
|
|
pvt->remapbase = ((u32) pci_data) << 14;
|
|
pci_read_config_word(mci->pdev, E7XXX_REMAPLIMIT, &pci_data);
|
|
pvt->remaplimit = ((u32) pci_data) << 14;
|
|
e7xxx_printk(KERN_INFO,
|
|
"tolm = %x, remapbase = %x, remaplimit = %x\n",
|
|
pvt->tolm, pvt->remapbase, pvt->remaplimit);
|
|
|
|
/* clear any pending errors, or initial state bits */
|
|
pci_write_bits8(pvt->bridge_ck, E7XXX_DRAM_FERR, 0x03, 0x03);
|
|
pci_write_bits8(pvt->bridge_ck, E7XXX_DRAM_NERR, 0x03, 0x03);
|
|
|
|
if (edac_mc_add_mc(mci) != 0) {
|
|
debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
|
|
goto fail;
|
|
}
|
|
|
|
/* get this far and it's successful */
|
|
debugf3("%s(): success\n", __func__);
|
|
return 0;
|
|
|
|
fail:
|
|
if (mci != NULL) {
|
|
if(pvt != NULL && pvt->bridge_ck)
|
|
pci_dev_put(pvt->bridge_ck);
|
|
edac_mc_free(mci);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/* returns count (>= 0), or negative on error */
|
|
static int __devinit
|
|
e7xxx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
debugf0("%s()\n", __func__);
|
|
|
|
/* wake up and enable device */
|
|
return pci_enable_device(pdev) ?
|
|
-EIO : e7xxx_probe1(pdev, ent->driver_data);
|
|
}
|
|
|
|
|
|
static void __devexit e7xxx_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct mem_ctl_info *mci;
|
|
struct e7xxx_pvt *pvt;
|
|
|
|
debugf0("%s()\n", __func__);
|
|
|
|
if (((mci = edac_mc_find_mci_by_pdev(pdev)) != 0) &&
|
|
edac_mc_del_mc(mci)) {
|
|
pvt = (struct e7xxx_pvt *) mci->pvt_info;
|
|
pci_dev_put(pvt->bridge_ck);
|
|
edac_mc_free(mci);
|
|
}
|
|
}
|
|
|
|
|
|
static const struct pci_device_id e7xxx_pci_tbl[] __devinitdata = {
|
|
{PCI_VEND_DEV(INTEL, 7205_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
E7205},
|
|
{PCI_VEND_DEV(INTEL, 7500_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
E7500},
|
|
{PCI_VEND_DEV(INTEL, 7501_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
E7501},
|
|
{PCI_VEND_DEV(INTEL, 7505_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
E7505},
|
|
{0,} /* 0 terminated list. */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, e7xxx_pci_tbl);
|
|
|
|
|
|
static struct pci_driver e7xxx_driver = {
|
|
.name = BS_MOD_STR,
|
|
.probe = e7xxx_init_one,
|
|
.remove = __devexit_p(e7xxx_remove_one),
|
|
.id_table = e7xxx_pci_tbl,
|
|
};
|
|
|
|
|
|
static int __init e7xxx_init(void)
|
|
{
|
|
return pci_register_driver(&e7xxx_driver);
|
|
}
|
|
|
|
|
|
static void __exit e7xxx_exit(void)
|
|
{
|
|
pci_unregister_driver(&e7xxx_driver);
|
|
}
|
|
|
|
module_init(e7xxx_init);
|
|
module_exit(e7xxx_exit);
|
|
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh et al\n"
|
|
"Based on.work by Dan Hollis et al");
|
|
MODULE_DESCRIPTION("MC support for Intel e7xxx memory controllers");
|