ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
1127 lines
26 KiB
C
1127 lines
26 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Copyright (c) 2022 Intel Corporation.
|
|
|
|
#include <asm/unaligned.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-fwnode.h>
|
|
|
|
#define OG01A1B_REG_VALUE_08BIT 1
|
|
#define OG01A1B_REG_VALUE_16BIT 2
|
|
#define OG01A1B_REG_VALUE_24BIT 3
|
|
|
|
#define OG01A1B_LINK_FREQ_500MHZ 500000000ULL
|
|
#define OG01A1B_SCLK 120000000LL
|
|
#define OG01A1B_MCLK 19200000
|
|
#define OG01A1B_DATA_LANES 2
|
|
#define OG01A1B_RGB_DEPTH 10
|
|
|
|
#define OG01A1B_REG_CHIP_ID 0x300a
|
|
#define OG01A1B_CHIP_ID 0x470141
|
|
|
|
#define OG01A1B_REG_MODE_SELECT 0x0100
|
|
#define OG01A1B_MODE_STANDBY 0x00
|
|
#define OG01A1B_MODE_STREAMING 0x01
|
|
|
|
/* vertical-timings from sensor */
|
|
#define OG01A1B_REG_VTS 0x380e
|
|
#define OG01A1B_VTS_120FPS 0x0498
|
|
#define OG01A1B_VTS_120FPS_MIN 0x0498
|
|
#define OG01A1B_VTS_MAX 0x7fff
|
|
|
|
/* horizontal-timings from sensor */
|
|
#define OG01A1B_REG_HTS 0x380c
|
|
|
|
/* Exposure controls from sensor */
|
|
#define OG01A1B_REG_EXPOSURE 0x3501
|
|
#define OG01A1B_EXPOSURE_MIN 1
|
|
#define OG01A1B_EXPOSURE_MAX_MARGIN 14
|
|
#define OG01A1B_EXPOSURE_STEP 1
|
|
|
|
/* Analog gain controls from sensor */
|
|
#define OG01A1B_REG_ANALOG_GAIN 0x3508
|
|
#define OG01A1B_ANAL_GAIN_MIN 16
|
|
#define OG01A1B_ANAL_GAIN_MAX 248 /* Max = 15.5x */
|
|
#define OG01A1B_ANAL_GAIN_STEP 1
|
|
|
|
/* Digital gain controls from sensor */
|
|
#define OG01A1B_REG_DIG_GAIN 0x350a
|
|
#define OG01A1B_DGTL_GAIN_MIN 1024
|
|
#define OG01A1B_DGTL_GAIN_MAX 16384 /* Max = 16x */
|
|
#define OG01A1B_DGTL_GAIN_STEP 1
|
|
#define OG01A1B_DGTL_GAIN_DEFAULT 1024
|
|
|
|
/* Group Access */
|
|
#define OG01A1B_REG_GROUP_ACCESS 0x3208
|
|
#define OG01A1B_GROUP_HOLD_START 0x0
|
|
#define OG01A1B_GROUP_HOLD_END 0x10
|
|
#define OG01A1B_GROUP_HOLD_LAUNCH 0xa0
|
|
|
|
/* Test Pattern Control */
|
|
#define OG01A1B_REG_TEST_PATTERN 0x5100
|
|
#define OG01A1B_TEST_PATTERN_ENABLE BIT(7)
|
|
#define OG01A1B_TEST_PATTERN_BAR_SHIFT 2
|
|
|
|
#define to_og01a1b(_sd) container_of(_sd, struct og01a1b, sd)
|
|
|
|
enum {
|
|
OG01A1B_LINK_FREQ_1000MBPS,
|
|
};
|
|
|
|
struct og01a1b_reg {
|
|
u16 address;
|
|
u8 val;
|
|
};
|
|
|
|
struct og01a1b_reg_list {
|
|
u32 num_of_regs;
|
|
const struct og01a1b_reg *regs;
|
|
};
|
|
|
|
struct og01a1b_link_freq_config {
|
|
const struct og01a1b_reg_list reg_list;
|
|
};
|
|
|
|
struct og01a1b_mode {
|
|
/* Frame width in pixels */
|
|
u32 width;
|
|
|
|
/* Frame height in pixels */
|
|
u32 height;
|
|
|
|
/* Horizontal timining size */
|
|
u32 hts;
|
|
|
|
/* Default vertical timining size */
|
|
u32 vts_def;
|
|
|
|
/* Min vertical timining size */
|
|
u32 vts_min;
|
|
|
|
/* Link frequency needed for this resolution */
|
|
u32 link_freq_index;
|
|
|
|
/* Sensor register settings for this resolution */
|
|
const struct og01a1b_reg_list reg_list;
|
|
};
|
|
|
|
static const struct og01a1b_reg mipi_data_rate_1000mbps[] = {
|
|
{0x0103, 0x01},
|
|
{0x0303, 0x02},
|
|
{0x0304, 0x00},
|
|
{0x0305, 0xd2},
|
|
{0x0323, 0x02},
|
|
{0x0324, 0x01},
|
|
{0x0325, 0x77},
|
|
};
|
|
|
|
static const struct og01a1b_reg mode_1280x1024_regs[] = {
|
|
{0x0300, 0x0a},
|
|
{0x0301, 0x29},
|
|
{0x0302, 0x31},
|
|
{0x0303, 0x02},
|
|
{0x0304, 0x00},
|
|
{0x0305, 0xd2},
|
|
{0x0306, 0x00},
|
|
{0x0307, 0x01},
|
|
{0x0308, 0x02},
|
|
{0x0309, 0x00},
|
|
{0x0310, 0x00},
|
|
{0x0311, 0x00},
|
|
{0x0312, 0x07},
|
|
{0x0313, 0x00},
|
|
{0x0314, 0x00},
|
|
{0x0315, 0x00},
|
|
{0x0320, 0x02},
|
|
{0x0321, 0x01},
|
|
{0x0322, 0x01},
|
|
{0x0323, 0x02},
|
|
{0x0324, 0x01},
|
|
{0x0325, 0x77},
|
|
{0x0326, 0xce},
|
|
{0x0327, 0x04},
|
|
{0x0329, 0x02},
|
|
{0x032a, 0x04},
|
|
{0x032b, 0x04},
|
|
{0x032c, 0x02},
|
|
{0x032d, 0x01},
|
|
{0x032e, 0x00},
|
|
{0x300d, 0x02},
|
|
{0x300e, 0x04},
|
|
{0x3021, 0x08},
|
|
{0x301e, 0x03},
|
|
{0x3103, 0x00},
|
|
{0x3106, 0x08},
|
|
{0x3107, 0x40},
|
|
{0x3216, 0x01},
|
|
{0x3217, 0x00},
|
|
{0x3218, 0xc0},
|
|
{0x3219, 0x55},
|
|
{0x3500, 0x00},
|
|
{0x3501, 0x04},
|
|
{0x3502, 0x8a},
|
|
{0x3506, 0x01},
|
|
{0x3507, 0x72},
|
|
{0x3508, 0x01},
|
|
{0x3509, 0x00},
|
|
{0x350a, 0x01},
|
|
{0x350b, 0x00},
|
|
{0x350c, 0x00},
|
|
{0x3541, 0x00},
|
|
{0x3542, 0x40},
|
|
{0x3605, 0xe0},
|
|
{0x3606, 0x41},
|
|
{0x3614, 0x20},
|
|
{0x3620, 0x0b},
|
|
{0x3630, 0x07},
|
|
{0x3636, 0xa0},
|
|
{0x3637, 0xf9},
|
|
{0x3638, 0x09},
|
|
{0x3639, 0x38},
|
|
{0x363f, 0x09},
|
|
{0x3640, 0x17},
|
|
{0x3662, 0x04},
|
|
{0x3665, 0x80},
|
|
{0x3670, 0x68},
|
|
{0x3674, 0x00},
|
|
{0x3677, 0x3f},
|
|
{0x3679, 0x00},
|
|
{0x369f, 0x19},
|
|
{0x36a0, 0x03},
|
|
{0x36a2, 0x19},
|
|
{0x36a3, 0x03},
|
|
{0x370d, 0x66},
|
|
{0x370f, 0x00},
|
|
{0x3710, 0x03},
|
|
{0x3715, 0x03},
|
|
{0x3716, 0x03},
|
|
{0x3717, 0x06},
|
|
{0x3733, 0x00},
|
|
{0x3778, 0x00},
|
|
{0x37a8, 0x0f},
|
|
{0x37a9, 0x01},
|
|
{0x37aa, 0x07},
|
|
{0x37bd, 0x1c},
|
|
{0x37c1, 0x2f},
|
|
{0x37c3, 0x09},
|
|
{0x37c8, 0x1d},
|
|
{0x37ca, 0x30},
|
|
{0x37df, 0x00},
|
|
{0x3800, 0x00},
|
|
{0x3801, 0x00},
|
|
{0x3802, 0x00},
|
|
{0x3803, 0x00},
|
|
{0x3804, 0x05},
|
|
{0x3805, 0x0f},
|
|
{0x3806, 0x04},
|
|
{0x3807, 0x0f},
|
|
{0x3808, 0x05},
|
|
{0x3809, 0x00},
|
|
{0x380a, 0x04},
|
|
{0x380b, 0x00},
|
|
{0x380c, 0x03},
|
|
{0x380d, 0x50},
|
|
{0x380e, 0x04},
|
|
{0x380f, 0x98},
|
|
{0x3810, 0x00},
|
|
{0x3811, 0x08},
|
|
{0x3812, 0x00},
|
|
{0x3813, 0x08},
|
|
{0x3814, 0x11},
|
|
{0x3815, 0x11},
|
|
{0x3820, 0x40},
|
|
{0x3821, 0x04},
|
|
{0x3826, 0x00},
|
|
{0x3827, 0x00},
|
|
{0x382a, 0x08},
|
|
{0x382b, 0x52},
|
|
{0x382d, 0xba},
|
|
{0x383d, 0x14},
|
|
{0x384a, 0xa2},
|
|
{0x3866, 0x0e},
|
|
{0x3867, 0x07},
|
|
{0x3884, 0x00},
|
|
{0x3885, 0x08},
|
|
{0x3893, 0x68},
|
|
{0x3894, 0x2a},
|
|
{0x3898, 0x00},
|
|
{0x3899, 0x31},
|
|
{0x389a, 0x04},
|
|
{0x389b, 0x00},
|
|
{0x389c, 0x0b},
|
|
{0x389d, 0xad},
|
|
{0x389f, 0x08},
|
|
{0x38a0, 0x00},
|
|
{0x38a1, 0x00},
|
|
{0x38a8, 0x70},
|
|
{0x38ac, 0xea},
|
|
{0x38b2, 0x00},
|
|
{0x38b3, 0x08},
|
|
{0x38bc, 0x20},
|
|
{0x38c4, 0x0c},
|
|
{0x38c5, 0x3a},
|
|
{0x38c7, 0x3a},
|
|
{0x38e1, 0xc0},
|
|
{0x38ec, 0x3c},
|
|
{0x38f0, 0x09},
|
|
{0x38f1, 0x6f},
|
|
{0x38fe, 0x3c},
|
|
{0x391e, 0x00},
|
|
{0x391f, 0x00},
|
|
{0x3920, 0xa5},
|
|
{0x3921, 0x00},
|
|
{0x3922, 0x00},
|
|
{0x3923, 0x00},
|
|
{0x3924, 0x05},
|
|
{0x3925, 0x00},
|
|
{0x3926, 0x00},
|
|
{0x3927, 0x00},
|
|
{0x3928, 0x1a},
|
|
{0x3929, 0x01},
|
|
{0x392a, 0xb4},
|
|
{0x392b, 0x00},
|
|
{0x392c, 0x10},
|
|
{0x392f, 0x40},
|
|
{0x4000, 0xcf},
|
|
{0x4003, 0x40},
|
|
{0x4008, 0x00},
|
|
{0x4009, 0x07},
|
|
{0x400a, 0x02},
|
|
{0x400b, 0x54},
|
|
{0x400c, 0x00},
|
|
{0x400d, 0x07},
|
|
{0x4010, 0xc0},
|
|
{0x4012, 0x02},
|
|
{0x4014, 0x04},
|
|
{0x4015, 0x04},
|
|
{0x4017, 0x02},
|
|
{0x4042, 0x01},
|
|
{0x4306, 0x04},
|
|
{0x4307, 0x12},
|
|
{0x4509, 0x00},
|
|
{0x450b, 0x83},
|
|
{0x4604, 0x68},
|
|
{0x4608, 0x0a},
|
|
{0x4700, 0x06},
|
|
{0x4800, 0x64},
|
|
{0x481b, 0x3c},
|
|
{0x4825, 0x32},
|
|
{0x4833, 0x18},
|
|
{0x4837, 0x0f},
|
|
{0x4850, 0x40},
|
|
{0x4860, 0x00},
|
|
{0x4861, 0xec},
|
|
{0x4864, 0x00},
|
|
{0x4883, 0x00},
|
|
{0x4888, 0x90},
|
|
{0x4889, 0x05},
|
|
{0x488b, 0x04},
|
|
{0x4f00, 0x04},
|
|
{0x4f10, 0x04},
|
|
{0x4f21, 0x01},
|
|
{0x4f22, 0x40},
|
|
{0x4f23, 0x44},
|
|
{0x4f24, 0x51},
|
|
{0x4f25, 0x41},
|
|
{0x5000, 0x1f},
|
|
{0x500a, 0x00},
|
|
{0x5100, 0x00},
|
|
{0x5111, 0x20},
|
|
{0x3020, 0x20},
|
|
{0x3613, 0x03},
|
|
{0x38c9, 0x02},
|
|
{0x5304, 0x01},
|
|
{0x3620, 0x08},
|
|
{0x3639, 0x58},
|
|
{0x363a, 0x10},
|
|
{0x3674, 0x04},
|
|
{0x3780, 0xff},
|
|
{0x3781, 0xff},
|
|
{0x3782, 0x00},
|
|
{0x3783, 0x01},
|
|
{0x3798, 0xa3},
|
|
{0x37aa, 0x10},
|
|
{0x38a8, 0xf0},
|
|
{0x38c4, 0x09},
|
|
{0x38c5, 0xb0},
|
|
{0x38df, 0x80},
|
|
{0x38ff, 0x05},
|
|
{0x4010, 0xf1},
|
|
{0x4011, 0x70},
|
|
{0x3667, 0x80},
|
|
{0x4d00, 0x4a},
|
|
{0x4d01, 0x18},
|
|
{0x4d02, 0xbb},
|
|
{0x4d03, 0xde},
|
|
{0x4d04, 0x93},
|
|
{0x4d05, 0xff},
|
|
{0x4d09, 0x0a},
|
|
{0x37aa, 0x16},
|
|
{0x3606, 0x42},
|
|
{0x3605, 0x00},
|
|
{0x36a2, 0x17},
|
|
{0x300d, 0x0a},
|
|
{0x4d00, 0x4d},
|
|
{0x4d01, 0x95},
|
|
{0x3d8C, 0x70},
|
|
{0x3d8d, 0xE9},
|
|
{0x5300, 0x00},
|
|
{0x5301, 0x10},
|
|
{0x5302, 0x00},
|
|
{0x5303, 0xE3},
|
|
{0x3d88, 0x00},
|
|
{0x3d89, 0x10},
|
|
{0x3d8a, 0x00},
|
|
{0x3d8b, 0xE3},
|
|
{0x4f22, 0x00},
|
|
};
|
|
|
|
static const char * const og01a1b_test_pattern_menu[] = {
|
|
"Disabled",
|
|
"Standard Color Bar",
|
|
"Top-Bottom Darker Color Bar",
|
|
"Right-Left Darker Color Bar",
|
|
"Bottom-Top Darker Color Bar"
|
|
};
|
|
|
|
static const s64 link_freq_menu_items[] = {
|
|
OG01A1B_LINK_FREQ_500MHZ,
|
|
};
|
|
|
|
static const struct og01a1b_link_freq_config link_freq_configs[] = {
|
|
[OG01A1B_LINK_FREQ_1000MBPS] = {
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mipi_data_rate_1000mbps),
|
|
.regs = mipi_data_rate_1000mbps,
|
|
}
|
|
}
|
|
};
|
|
|
|
static const struct og01a1b_mode supported_modes[] = {
|
|
{
|
|
.width = 1280,
|
|
.height = 1024,
|
|
.hts = 848,
|
|
.vts_def = OG01A1B_VTS_120FPS,
|
|
.vts_min = OG01A1B_VTS_120FPS_MIN,
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mode_1280x1024_regs),
|
|
.regs = mode_1280x1024_regs,
|
|
},
|
|
.link_freq_index = OG01A1B_LINK_FREQ_1000MBPS,
|
|
},
|
|
};
|
|
|
|
struct og01a1b {
|
|
struct v4l2_subdev sd;
|
|
struct media_pad pad;
|
|
struct v4l2_ctrl_handler ctrl_handler;
|
|
|
|
/* V4L2 Controls */
|
|
struct v4l2_ctrl *link_freq;
|
|
struct v4l2_ctrl *pixel_rate;
|
|
struct v4l2_ctrl *vblank;
|
|
struct v4l2_ctrl *hblank;
|
|
struct v4l2_ctrl *exposure;
|
|
|
|
/* Current mode */
|
|
const struct og01a1b_mode *cur_mode;
|
|
|
|
/* To serialize asynchronus callbacks */
|
|
struct mutex mutex;
|
|
|
|
/* Streaming on/off */
|
|
bool streaming;
|
|
};
|
|
|
|
static u64 to_pixel_rate(u32 f_index)
|
|
{
|
|
u64 pixel_rate = link_freq_menu_items[f_index] * 2 * OG01A1B_DATA_LANES;
|
|
|
|
do_div(pixel_rate, OG01A1B_RGB_DEPTH);
|
|
|
|
return pixel_rate;
|
|
}
|
|
|
|
static u64 to_pixels_per_line(u32 hts, u32 f_index)
|
|
{
|
|
u64 ppl = hts * to_pixel_rate(f_index);
|
|
|
|
do_div(ppl, OG01A1B_SCLK);
|
|
|
|
return ppl;
|
|
}
|
|
|
|
static int og01a1b_read_reg(struct og01a1b *og01a1b, u16 reg, u16 len, u32 *val)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&og01a1b->sd);
|
|
struct i2c_msg msgs[2];
|
|
u8 addr_buf[2];
|
|
u8 data_buf[4] = {0};
|
|
int ret;
|
|
|
|
if (len > 4)
|
|
return -EINVAL;
|
|
|
|
put_unaligned_be16(reg, addr_buf);
|
|
msgs[0].addr = client->addr;
|
|
msgs[0].flags = 0;
|
|
msgs[0].len = sizeof(addr_buf);
|
|
msgs[0].buf = addr_buf;
|
|
msgs[1].addr = client->addr;
|
|
msgs[1].flags = I2C_M_RD;
|
|
msgs[1].len = len;
|
|
msgs[1].buf = &data_buf[4 - len];
|
|
|
|
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (ret != ARRAY_SIZE(msgs))
|
|
return -EIO;
|
|
|
|
*val = get_unaligned_be32(data_buf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og01a1b_write_reg(struct og01a1b *og01a1b, u16 reg, u16 len, u32 val)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&og01a1b->sd);
|
|
u8 buf[6];
|
|
|
|
if (len > 4)
|
|
return -EINVAL;
|
|
|
|
put_unaligned_be16(reg, buf);
|
|
put_unaligned_be32(val << 8 * (4 - len), buf + 2);
|
|
if (i2c_master_send(client, buf, len + 2) != len + 2)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og01a1b_write_reg_list(struct og01a1b *og01a1b,
|
|
const struct og01a1b_reg_list *r_list)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&og01a1b->sd);
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < r_list->num_of_regs; i++) {
|
|
ret = og01a1b_write_reg(og01a1b, r_list->regs[i].address, 1,
|
|
r_list->regs[i].val);
|
|
if (ret) {
|
|
dev_err_ratelimited(&client->dev,
|
|
"failed to write reg 0x%4.4x. error = %d",
|
|
r_list->regs[i].address, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og01a1b_test_pattern(struct og01a1b *og01a1b, u32 pattern)
|
|
{
|
|
if (pattern)
|
|
pattern = (pattern - 1) << OG01A1B_TEST_PATTERN_BAR_SHIFT |
|
|
OG01A1B_TEST_PATTERN_ENABLE;
|
|
|
|
return og01a1b_write_reg(og01a1b, OG01A1B_REG_TEST_PATTERN,
|
|
OG01A1B_REG_VALUE_08BIT, pattern);
|
|
}
|
|
|
|
static int og01a1b_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct og01a1b *og01a1b = container_of(ctrl->handler,
|
|
struct og01a1b, ctrl_handler);
|
|
struct i2c_client *client = v4l2_get_subdevdata(&og01a1b->sd);
|
|
s64 exposure_max;
|
|
int ret = 0;
|
|
|
|
/* Propagate change of current control to all related controls */
|
|
if (ctrl->id == V4L2_CID_VBLANK) {
|
|
/* Update max exposure while meeting expected vblanking */
|
|
exposure_max = og01a1b->cur_mode->height + ctrl->val -
|
|
OG01A1B_EXPOSURE_MAX_MARGIN;
|
|
__v4l2_ctrl_modify_range(og01a1b->exposure,
|
|
og01a1b->exposure->minimum,
|
|
exposure_max, og01a1b->exposure->step,
|
|
exposure_max);
|
|
}
|
|
|
|
/* V4L2 controls values will be applied only when power is already up */
|
|
if (!pm_runtime_get_if_in_use(&client->dev))
|
|
return 0;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_ANALOGUE_GAIN:
|
|
ret = og01a1b_write_reg(og01a1b, OG01A1B_REG_ANALOG_GAIN,
|
|
OG01A1B_REG_VALUE_16BIT,
|
|
ctrl->val << 4);
|
|
break;
|
|
|
|
case V4L2_CID_DIGITAL_GAIN:
|
|
ret = og01a1b_write_reg(og01a1b, OG01A1B_REG_DIG_GAIN,
|
|
OG01A1B_REG_VALUE_24BIT,
|
|
ctrl->val << 6);
|
|
break;
|
|
|
|
case V4L2_CID_EXPOSURE:
|
|
ret = og01a1b_write_reg(og01a1b, OG01A1B_REG_EXPOSURE,
|
|
OG01A1B_REG_VALUE_16BIT, ctrl->val);
|
|
break;
|
|
|
|
case V4L2_CID_VBLANK:
|
|
ret = og01a1b_write_reg(og01a1b, OG01A1B_REG_VTS,
|
|
OG01A1B_REG_VALUE_16BIT,
|
|
og01a1b->cur_mode->height + ctrl->val);
|
|
break;
|
|
|
|
case V4L2_CID_TEST_PATTERN:
|
|
ret = og01a1b_test_pattern(og01a1b, ctrl->val);
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
pm_runtime_put(&client->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops og01a1b_ctrl_ops = {
|
|
.s_ctrl = og01a1b_set_ctrl,
|
|
};
|
|
|
|
static int og01a1b_init_controls(struct og01a1b *og01a1b)
|
|
{
|
|
struct v4l2_ctrl_handler *ctrl_hdlr;
|
|
s64 exposure_max, h_blank;
|
|
int ret;
|
|
|
|
ctrl_hdlr = &og01a1b->ctrl_handler;
|
|
ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ctrl_hdlr->lock = &og01a1b->mutex;
|
|
og01a1b->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr,
|
|
&og01a1b_ctrl_ops,
|
|
V4L2_CID_LINK_FREQ,
|
|
ARRAY_SIZE
|
|
(link_freq_menu_items) - 1,
|
|
0, link_freq_menu_items);
|
|
if (og01a1b->link_freq)
|
|
og01a1b->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
og01a1b->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &og01a1b_ctrl_ops,
|
|
V4L2_CID_PIXEL_RATE, 0,
|
|
to_pixel_rate
|
|
(OG01A1B_LINK_FREQ_1000MBPS),
|
|
1,
|
|
to_pixel_rate
|
|
(OG01A1B_LINK_FREQ_1000MBPS));
|
|
og01a1b->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &og01a1b_ctrl_ops,
|
|
V4L2_CID_VBLANK,
|
|
og01a1b->cur_mode->vts_min -
|
|
og01a1b->cur_mode->height,
|
|
OG01A1B_VTS_MAX -
|
|
og01a1b->cur_mode->height, 1,
|
|
og01a1b->cur_mode->vts_def -
|
|
og01a1b->cur_mode->height);
|
|
h_blank = to_pixels_per_line(og01a1b->cur_mode->hts,
|
|
og01a1b->cur_mode->link_freq_index) -
|
|
og01a1b->cur_mode->width;
|
|
og01a1b->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &og01a1b_ctrl_ops,
|
|
V4L2_CID_HBLANK, h_blank, h_blank,
|
|
1, h_blank);
|
|
if (og01a1b->hblank)
|
|
og01a1b->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &og01a1b_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
|
|
OG01A1B_ANAL_GAIN_MIN, OG01A1B_ANAL_GAIN_MAX,
|
|
OG01A1B_ANAL_GAIN_STEP, OG01A1B_ANAL_GAIN_MIN);
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &og01a1b_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
|
|
OG01A1B_DGTL_GAIN_MIN, OG01A1B_DGTL_GAIN_MAX,
|
|
OG01A1B_DGTL_GAIN_STEP, OG01A1B_DGTL_GAIN_DEFAULT);
|
|
exposure_max = (og01a1b->cur_mode->vts_def -
|
|
OG01A1B_EXPOSURE_MAX_MARGIN);
|
|
og01a1b->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &og01a1b_ctrl_ops,
|
|
V4L2_CID_EXPOSURE,
|
|
OG01A1B_EXPOSURE_MIN,
|
|
exposure_max,
|
|
OG01A1B_EXPOSURE_STEP,
|
|
exposure_max);
|
|
v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &og01a1b_ctrl_ops,
|
|
V4L2_CID_TEST_PATTERN,
|
|
ARRAY_SIZE(og01a1b_test_pattern_menu) - 1,
|
|
0, 0, og01a1b_test_pattern_menu);
|
|
|
|
if (ctrl_hdlr->error)
|
|
return ctrl_hdlr->error;
|
|
|
|
og01a1b->sd.ctrl_handler = ctrl_hdlr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void og01a1b_update_pad_format(const struct og01a1b_mode *mode,
|
|
struct v4l2_mbus_framefmt *fmt)
|
|
{
|
|
fmt->width = mode->width;
|
|
fmt->height = mode->height;
|
|
fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
|
|
fmt->field = V4L2_FIELD_NONE;
|
|
}
|
|
|
|
static int og01a1b_start_streaming(struct og01a1b *og01a1b)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&og01a1b->sd);
|
|
const struct og01a1b_reg_list *reg_list;
|
|
int link_freq_index, ret;
|
|
|
|
link_freq_index = og01a1b->cur_mode->link_freq_index;
|
|
reg_list = &link_freq_configs[link_freq_index].reg_list;
|
|
|
|
ret = og01a1b_write_reg_list(og01a1b, reg_list);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to set plls");
|
|
return ret;
|
|
}
|
|
|
|
reg_list = &og01a1b->cur_mode->reg_list;
|
|
ret = og01a1b_write_reg_list(og01a1b, reg_list);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to set mode");
|
|
return ret;
|
|
}
|
|
|
|
ret = __v4l2_ctrl_handler_setup(og01a1b->sd.ctrl_handler);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = og01a1b_write_reg(og01a1b, OG01A1B_REG_MODE_SELECT,
|
|
OG01A1B_REG_VALUE_08BIT,
|
|
OG01A1B_MODE_STREAMING);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to set stream");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void og01a1b_stop_streaming(struct og01a1b *og01a1b)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&og01a1b->sd);
|
|
|
|
if (og01a1b_write_reg(og01a1b, OG01A1B_REG_MODE_SELECT,
|
|
OG01A1B_REG_VALUE_08BIT, OG01A1B_MODE_STANDBY))
|
|
dev_err(&client->dev, "failed to set stream");
|
|
}
|
|
|
|
static int og01a1b_set_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
struct og01a1b *og01a1b = to_og01a1b(sd);
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
int ret = 0;
|
|
|
|
if (og01a1b->streaming == enable)
|
|
return 0;
|
|
|
|
mutex_lock(&og01a1b->mutex);
|
|
if (enable) {
|
|
ret = pm_runtime_get_sync(&client->dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(&client->dev);
|
|
mutex_unlock(&og01a1b->mutex);
|
|
return ret;
|
|
}
|
|
|
|
ret = og01a1b_start_streaming(og01a1b);
|
|
if (ret) {
|
|
enable = 0;
|
|
og01a1b_stop_streaming(og01a1b);
|
|
pm_runtime_put(&client->dev);
|
|
}
|
|
} else {
|
|
og01a1b_stop_streaming(og01a1b);
|
|
pm_runtime_put(&client->dev);
|
|
}
|
|
|
|
og01a1b->streaming = enable;
|
|
mutex_unlock(&og01a1b->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused og01a1b_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct og01a1b *og01a1b = to_og01a1b(sd);
|
|
|
|
mutex_lock(&og01a1b->mutex);
|
|
if (og01a1b->streaming)
|
|
og01a1b_stop_streaming(og01a1b);
|
|
|
|
mutex_unlock(&og01a1b->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused og01a1b_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct og01a1b *og01a1b = to_og01a1b(sd);
|
|
int ret;
|
|
|
|
mutex_lock(&og01a1b->mutex);
|
|
if (og01a1b->streaming) {
|
|
ret = og01a1b_start_streaming(og01a1b);
|
|
if (ret) {
|
|
og01a1b->streaming = false;
|
|
og01a1b_stop_streaming(og01a1b);
|
|
mutex_unlock(&og01a1b->mutex);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&og01a1b->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og01a1b_set_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct og01a1b *og01a1b = to_og01a1b(sd);
|
|
const struct og01a1b_mode *mode;
|
|
s32 vblank_def, h_blank;
|
|
|
|
mode = v4l2_find_nearest_size(supported_modes,
|
|
ARRAY_SIZE(supported_modes), width,
|
|
height, fmt->format.width,
|
|
fmt->format.height);
|
|
|
|
mutex_lock(&og01a1b->mutex);
|
|
og01a1b_update_pad_format(mode, &fmt->format);
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
*v4l2_subdev_get_try_format(sd, sd_state,
|
|
fmt->pad) = fmt->format;
|
|
} else {
|
|
og01a1b->cur_mode = mode;
|
|
__v4l2_ctrl_s_ctrl(og01a1b->link_freq, mode->link_freq_index);
|
|
__v4l2_ctrl_s_ctrl_int64(og01a1b->pixel_rate,
|
|
to_pixel_rate(mode->link_freq_index));
|
|
|
|
/* Update limits and set FPS to default */
|
|
vblank_def = mode->vts_def - mode->height;
|
|
__v4l2_ctrl_modify_range(og01a1b->vblank,
|
|
mode->vts_min - mode->height,
|
|
OG01A1B_VTS_MAX - mode->height, 1,
|
|
vblank_def);
|
|
__v4l2_ctrl_s_ctrl(og01a1b->vblank, vblank_def);
|
|
h_blank = to_pixels_per_line(mode->hts, mode->link_freq_index) -
|
|
mode->width;
|
|
__v4l2_ctrl_modify_range(og01a1b->hblank, h_blank, h_blank, 1,
|
|
h_blank);
|
|
}
|
|
|
|
mutex_unlock(&og01a1b->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og01a1b_get_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct og01a1b *og01a1b = to_og01a1b(sd);
|
|
|
|
mutex_lock(&og01a1b->mutex);
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
|
|
fmt->format = *v4l2_subdev_get_try_format(&og01a1b->sd,
|
|
sd_state,
|
|
fmt->pad);
|
|
else
|
|
og01a1b_update_pad_format(og01a1b->cur_mode, &fmt->format);
|
|
|
|
mutex_unlock(&og01a1b->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og01a1b_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
if (code->index > 0)
|
|
return -EINVAL;
|
|
|
|
code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og01a1b_enum_frame_size(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
{
|
|
if (fse->index >= ARRAY_SIZE(supported_modes))
|
|
return -EINVAL;
|
|
|
|
if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
|
|
return -EINVAL;
|
|
|
|
fse->min_width = supported_modes[fse->index].width;
|
|
fse->max_width = fse->min_width;
|
|
fse->min_height = supported_modes[fse->index].height;
|
|
fse->max_height = fse->min_height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og01a1b_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
|
{
|
|
struct og01a1b *og01a1b = to_og01a1b(sd);
|
|
|
|
mutex_lock(&og01a1b->mutex);
|
|
og01a1b_update_pad_format(&supported_modes[0],
|
|
v4l2_subdev_get_try_format(sd, fh->state, 0));
|
|
mutex_unlock(&og01a1b->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_subdev_video_ops og01a1b_video_ops = {
|
|
.s_stream = og01a1b_set_stream,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops og01a1b_pad_ops = {
|
|
.set_fmt = og01a1b_set_format,
|
|
.get_fmt = og01a1b_get_format,
|
|
.enum_mbus_code = og01a1b_enum_mbus_code,
|
|
.enum_frame_size = og01a1b_enum_frame_size,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops og01a1b_subdev_ops = {
|
|
.video = &og01a1b_video_ops,
|
|
.pad = &og01a1b_pad_ops,
|
|
};
|
|
|
|
static const struct media_entity_operations og01a1b_subdev_entity_ops = {
|
|
.link_validate = v4l2_subdev_link_validate,
|
|
};
|
|
|
|
static const struct v4l2_subdev_internal_ops og01a1b_internal_ops = {
|
|
.open = og01a1b_open,
|
|
};
|
|
|
|
static int og01a1b_identify_module(struct og01a1b *og01a1b)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&og01a1b->sd);
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = og01a1b_read_reg(og01a1b, OG01A1B_REG_CHIP_ID,
|
|
OG01A1B_REG_VALUE_24BIT, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val != OG01A1B_CHIP_ID) {
|
|
dev_err(&client->dev, "chip id mismatch: %x!=%x",
|
|
OG01A1B_CHIP_ID, val);
|
|
return -ENXIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og01a1b_check_hwcfg(struct device *dev)
|
|
{
|
|
struct fwnode_handle *ep;
|
|
struct fwnode_handle *fwnode = dev_fwnode(dev);
|
|
struct v4l2_fwnode_endpoint bus_cfg = {
|
|
.bus_type = V4L2_MBUS_CSI2_DPHY
|
|
};
|
|
u32 mclk;
|
|
int ret;
|
|
unsigned int i, j;
|
|
|
|
if (!fwnode)
|
|
return -ENXIO;
|
|
|
|
ret = fwnode_property_read_u32(fwnode, "clock-frequency", &mclk);
|
|
|
|
if (ret) {
|
|
dev_err(dev, "can't get clock frequency");
|
|
return ret;
|
|
}
|
|
|
|
if (mclk != OG01A1B_MCLK) {
|
|
dev_err(dev, "external clock %d is not supported", mclk);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
|
|
if (!ep)
|
|
return -ENXIO;
|
|
|
|
ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
|
|
fwnode_handle_put(ep);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (bus_cfg.bus.mipi_csi2.num_data_lanes != OG01A1B_DATA_LANES) {
|
|
dev_err(dev, "number of CSI2 data lanes %d is not supported",
|
|
bus_cfg.bus.mipi_csi2.num_data_lanes);
|
|
ret = -EINVAL;
|
|
goto check_hwcfg_error;
|
|
}
|
|
|
|
if (!bus_cfg.nr_of_link_frequencies) {
|
|
dev_err(dev, "no link frequencies defined");
|
|
ret = -EINVAL;
|
|
goto check_hwcfg_error;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(link_freq_menu_items); i++) {
|
|
for (j = 0; j < bus_cfg.nr_of_link_frequencies; j++) {
|
|
if (link_freq_menu_items[i] ==
|
|
bus_cfg.link_frequencies[j])
|
|
break;
|
|
}
|
|
|
|
if (j == bus_cfg.nr_of_link_frequencies) {
|
|
dev_err(dev, "no link frequency %lld supported",
|
|
link_freq_menu_items[i]);
|
|
ret = -EINVAL;
|
|
goto check_hwcfg_error;
|
|
}
|
|
}
|
|
|
|
check_hwcfg_error:
|
|
v4l2_fwnode_endpoint_free(&bus_cfg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void og01a1b_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct og01a1b *og01a1b = to_og01a1b(sd);
|
|
|
|
v4l2_async_unregister_subdev(sd);
|
|
media_entity_cleanup(&sd->entity);
|
|
v4l2_ctrl_handler_free(sd->ctrl_handler);
|
|
pm_runtime_disable(&client->dev);
|
|
mutex_destroy(&og01a1b->mutex);
|
|
}
|
|
|
|
static int og01a1b_probe(struct i2c_client *client)
|
|
{
|
|
struct og01a1b *og01a1b;
|
|
int ret;
|
|
|
|
ret = og01a1b_check_hwcfg(&client->dev);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to check HW configuration: %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
og01a1b = devm_kzalloc(&client->dev, sizeof(*og01a1b), GFP_KERNEL);
|
|
if (!og01a1b)
|
|
return -ENOMEM;
|
|
|
|
v4l2_i2c_subdev_init(&og01a1b->sd, client, &og01a1b_subdev_ops);
|
|
ret = og01a1b_identify_module(og01a1b);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to find sensor: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
mutex_init(&og01a1b->mutex);
|
|
og01a1b->cur_mode = &supported_modes[0];
|
|
ret = og01a1b_init_controls(og01a1b);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to init controls: %d", ret);
|
|
goto probe_error_v4l2_ctrl_handler_free;
|
|
}
|
|
|
|
og01a1b->sd.internal_ops = &og01a1b_internal_ops;
|
|
og01a1b->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
og01a1b->sd.entity.ops = &og01a1b_subdev_entity_ops;
|
|
og01a1b->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
og01a1b->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
ret = media_entity_pads_init(&og01a1b->sd.entity, 1, &og01a1b->pad);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to init entity pads: %d", ret);
|
|
goto probe_error_v4l2_ctrl_handler_free;
|
|
}
|
|
|
|
ret = v4l2_async_register_subdev_sensor(&og01a1b->sd);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "failed to register V4L2 subdev: %d",
|
|
ret);
|
|
goto probe_error_media_entity_cleanup;
|
|
}
|
|
|
|
/*
|
|
* Device is already turned on by i2c-core with ACPI domain PM.
|
|
* Enable runtime PM and turn off the device.
|
|
*/
|
|
pm_runtime_set_active(&client->dev);
|
|
pm_runtime_enable(&client->dev);
|
|
pm_runtime_idle(&client->dev);
|
|
|
|
return 0;
|
|
|
|
probe_error_media_entity_cleanup:
|
|
media_entity_cleanup(&og01a1b->sd.entity);
|
|
|
|
probe_error_v4l2_ctrl_handler_free:
|
|
v4l2_ctrl_handler_free(og01a1b->sd.ctrl_handler);
|
|
mutex_destroy(&og01a1b->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dev_pm_ops og01a1b_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(og01a1b_suspend, og01a1b_resume)
|
|
};
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id og01a1b_acpi_ids[] = {
|
|
{"OVTI01AC"},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(acpi, og01a1b_acpi_ids);
|
|
#endif
|
|
|
|
static struct i2c_driver og01a1b_i2c_driver = {
|
|
.driver = {
|
|
.name = "og01a1b",
|
|
.pm = &og01a1b_pm_ops,
|
|
.acpi_match_table = ACPI_PTR(og01a1b_acpi_ids),
|
|
},
|
|
.probe_new = og01a1b_probe,
|
|
.remove = og01a1b_remove,
|
|
};
|
|
|
|
module_i2c_driver(og01a1b_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Shawn Tu <shawnx.tu@intel.com>");
|
|
MODULE_DESCRIPTION("OmniVision OG01A1B sensor driver");
|
|
MODULE_LICENSE("GPL v2");
|