ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
1296 lines
29 KiB
C
1296 lines
29 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Copyright (c) 2019 Intel Corporation.
|
|
|
|
#include <asm/unaligned.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-fwnode.h>
|
|
|
|
#define OV5675_REG_VALUE_08BIT 1
|
|
#define OV5675_REG_VALUE_16BIT 2
|
|
#define OV5675_REG_VALUE_24BIT 3
|
|
|
|
#define OV5675_LINK_FREQ_450MHZ 450000000ULL
|
|
#define OV5675_SCLK 90000000LL
|
|
#define OV5675_MCLK 19200000
|
|
#define OV5675_DATA_LANES 2
|
|
#define OV5675_RGB_DEPTH 10
|
|
|
|
#define OV5675_REG_CHIP_ID 0x300a
|
|
#define OV5675_CHIP_ID 0x5675
|
|
|
|
#define OV5675_REG_MODE_SELECT 0x0100
|
|
#define OV5675_MODE_STANDBY 0x00
|
|
#define OV5675_MODE_STREAMING 0x01
|
|
|
|
/* vertical-timings from sensor */
|
|
#define OV5675_REG_VTS 0x380e
|
|
#define OV5675_VTS_30FPS 0x07e4
|
|
#define OV5675_VTS_30FPS_MIN 0x07e4
|
|
#define OV5675_VTS_MAX 0x7fff
|
|
|
|
/* horizontal-timings from sensor */
|
|
#define OV5675_REG_HTS 0x380c
|
|
|
|
/* Exposure controls from sensor */
|
|
#define OV5675_REG_EXPOSURE 0x3500
|
|
#define OV5675_EXPOSURE_MIN 4
|
|
#define OV5675_EXPOSURE_MAX_MARGIN 4
|
|
#define OV5675_EXPOSURE_STEP 1
|
|
|
|
/* Analog gain controls from sensor */
|
|
#define OV5675_REG_ANALOG_GAIN 0x3508
|
|
#define OV5675_ANAL_GAIN_MIN 128
|
|
#define OV5675_ANAL_GAIN_MAX 2047
|
|
#define OV5675_ANAL_GAIN_STEP 1
|
|
|
|
/* Digital gain controls from sensor */
|
|
#define OV5675_REG_DIGITAL_GAIN 0x350a
|
|
#define OV5675_REG_MWB_R_GAIN 0x5019
|
|
#define OV5675_REG_MWB_G_GAIN 0x501b
|
|
#define OV5675_REG_MWB_B_GAIN 0x501d
|
|
#define OV5675_DGTL_GAIN_MIN 1024
|
|
#define OV5675_DGTL_GAIN_MAX 4095
|
|
#define OV5675_DGTL_GAIN_STEP 1
|
|
#define OV5675_DGTL_GAIN_DEFAULT 1024
|
|
|
|
/* Group Access */
|
|
#define OV5675_REG_GROUP_ACCESS 0x3208
|
|
#define OV5675_GROUP_HOLD_START 0x0
|
|
#define OV5675_GROUP_HOLD_END 0x10
|
|
#define OV5675_GROUP_HOLD_LAUNCH 0xa0
|
|
|
|
/* Test Pattern Control */
|
|
#define OV5675_REG_TEST_PATTERN 0x4503
|
|
#define OV5675_TEST_PATTERN_ENABLE BIT(7)
|
|
#define OV5675_TEST_PATTERN_BAR_SHIFT 2
|
|
|
|
/* Flip Mirror Controls from sensor */
|
|
#define OV5675_REG_FORMAT1 0x3820
|
|
#define OV5675_REG_FORMAT2 0x373d
|
|
|
|
#define to_ov5675(_sd) container_of(_sd, struct ov5675, sd)
|
|
|
|
enum {
|
|
OV5675_LINK_FREQ_900MBPS,
|
|
};
|
|
|
|
struct ov5675_reg {
|
|
u16 address;
|
|
u8 val;
|
|
};
|
|
|
|
struct ov5675_reg_list {
|
|
u32 num_of_regs;
|
|
const struct ov5675_reg *regs;
|
|
};
|
|
|
|
struct ov5675_link_freq_config {
|
|
const struct ov5675_reg_list reg_list;
|
|
};
|
|
|
|
struct ov5675_mode {
|
|
/* Frame width in pixels */
|
|
u32 width;
|
|
|
|
/* Frame height in pixels */
|
|
u32 height;
|
|
|
|
/* Horizontal timining size */
|
|
u32 hts;
|
|
|
|
/* Default vertical timining size */
|
|
u32 vts_def;
|
|
|
|
/* Min vertical timining size */
|
|
u32 vts_min;
|
|
|
|
/* Link frequency needed for this resolution */
|
|
u32 link_freq_index;
|
|
|
|
/* Sensor register settings for this resolution */
|
|
const struct ov5675_reg_list reg_list;
|
|
};
|
|
|
|
static const struct ov5675_reg mipi_data_rate_900mbps[] = {
|
|
{0x0103, 0x01},
|
|
{0x0100, 0x00},
|
|
{0x0300, 0x04},
|
|
{0x0302, 0x8d},
|
|
{0x0303, 0x00},
|
|
{0x030d, 0x26},
|
|
};
|
|
|
|
static const struct ov5675_reg mode_2592x1944_regs[] = {
|
|
{0x3002, 0x21},
|
|
{0x3107, 0x23},
|
|
{0x3501, 0x20},
|
|
{0x3503, 0x0c},
|
|
{0x3508, 0x03},
|
|
{0x3509, 0x00},
|
|
{0x3600, 0x66},
|
|
{0x3602, 0x30},
|
|
{0x3610, 0xa5},
|
|
{0x3612, 0x93},
|
|
{0x3620, 0x80},
|
|
{0x3642, 0x0e},
|
|
{0x3661, 0x00},
|
|
{0x3662, 0x10},
|
|
{0x3664, 0xf3},
|
|
{0x3665, 0x9e},
|
|
{0x3667, 0xa5},
|
|
{0x366e, 0x55},
|
|
{0x366f, 0x55},
|
|
{0x3670, 0x11},
|
|
{0x3671, 0x11},
|
|
{0x3672, 0x11},
|
|
{0x3673, 0x11},
|
|
{0x3714, 0x24},
|
|
{0x371a, 0x3e},
|
|
{0x3733, 0x10},
|
|
{0x3734, 0x00},
|
|
{0x373d, 0x24},
|
|
{0x3764, 0x20},
|
|
{0x3765, 0x20},
|
|
{0x3766, 0x12},
|
|
{0x37a1, 0x14},
|
|
{0x37a8, 0x1c},
|
|
{0x37ab, 0x0f},
|
|
{0x37c2, 0x04},
|
|
{0x37cb, 0x00},
|
|
{0x37cc, 0x00},
|
|
{0x37cd, 0x00},
|
|
{0x37ce, 0x00},
|
|
{0x37d8, 0x02},
|
|
{0x37d9, 0x08},
|
|
{0x37dc, 0x04},
|
|
{0x3800, 0x00},
|
|
{0x3801, 0x00},
|
|
{0x3802, 0x00},
|
|
{0x3803, 0x04},
|
|
{0x3804, 0x0a},
|
|
{0x3805, 0x3f},
|
|
{0x3806, 0x07},
|
|
{0x3807, 0xb3},
|
|
{0x3808, 0x0a},
|
|
{0x3809, 0x20},
|
|
{0x380a, 0x07},
|
|
{0x380b, 0x98},
|
|
{0x380c, 0x02},
|
|
{0x380d, 0xee},
|
|
{0x380e, 0x07},
|
|
{0x380f, 0xe4},
|
|
{0x3811, 0x10},
|
|
{0x3813, 0x0d},
|
|
{0x3814, 0x01},
|
|
{0x3815, 0x01},
|
|
{0x3816, 0x01},
|
|
{0x3817, 0x01},
|
|
{0x381e, 0x02},
|
|
{0x3820, 0x88},
|
|
{0x3821, 0x01},
|
|
{0x3832, 0x04},
|
|
{0x3c80, 0x01},
|
|
{0x3c82, 0x00},
|
|
{0x3c83, 0xc8},
|
|
{0x3c8c, 0x0f},
|
|
{0x3c8d, 0xa0},
|
|
{0x3c90, 0x07},
|
|
{0x3c91, 0x00},
|
|
{0x3c92, 0x00},
|
|
{0x3c93, 0x00},
|
|
{0x3c94, 0xd0},
|
|
{0x3c95, 0x50},
|
|
{0x3c96, 0x35},
|
|
{0x3c97, 0x00},
|
|
{0x4001, 0xe0},
|
|
{0x4008, 0x02},
|
|
{0x4009, 0x0d},
|
|
{0x400f, 0x80},
|
|
{0x4013, 0x02},
|
|
{0x4040, 0x00},
|
|
{0x4041, 0x07},
|
|
{0x404c, 0x50},
|
|
{0x404e, 0x20},
|
|
{0x4500, 0x06},
|
|
{0x4503, 0x00},
|
|
{0x450a, 0x04},
|
|
{0x4809, 0x04},
|
|
{0x480c, 0x12},
|
|
{0x4819, 0x70},
|
|
{0x4825, 0x32},
|
|
{0x4826, 0x32},
|
|
{0x482a, 0x06},
|
|
{0x4833, 0x08},
|
|
{0x4837, 0x0d},
|
|
{0x5000, 0x77},
|
|
{0x5b00, 0x01},
|
|
{0x5b01, 0x10},
|
|
{0x5b02, 0x01},
|
|
{0x5b03, 0xdb},
|
|
{0x5b05, 0x6c},
|
|
{0x5e10, 0xfc},
|
|
{0x3500, 0x00},
|
|
{0x3501, 0x3E},
|
|
{0x3502, 0x60},
|
|
{0x3503, 0x08},
|
|
{0x3508, 0x04},
|
|
{0x3509, 0x00},
|
|
{0x3832, 0x48},
|
|
{0x5780, 0x3e},
|
|
{0x5781, 0x0f},
|
|
{0x5782, 0x44},
|
|
{0x5783, 0x02},
|
|
{0x5784, 0x01},
|
|
{0x5785, 0x01},
|
|
{0x5786, 0x00},
|
|
{0x5787, 0x04},
|
|
{0x5788, 0x02},
|
|
{0x5789, 0x0f},
|
|
{0x578a, 0xfd},
|
|
{0x578b, 0xf5},
|
|
{0x578c, 0xf5},
|
|
{0x578d, 0x03},
|
|
{0x578e, 0x08},
|
|
{0x578f, 0x0c},
|
|
{0x5790, 0x08},
|
|
{0x5791, 0x06},
|
|
{0x5792, 0x00},
|
|
{0x5793, 0x52},
|
|
{0x5794, 0xa3},
|
|
{0x4003, 0x40},
|
|
{0x3107, 0x01},
|
|
{0x3c80, 0x08},
|
|
{0x3c83, 0xb1},
|
|
{0x3c8c, 0x10},
|
|
{0x3c8d, 0x00},
|
|
{0x3c90, 0x00},
|
|
{0x3c94, 0x00},
|
|
{0x3c95, 0x00},
|
|
{0x3c96, 0x00},
|
|
{0x37cb, 0x09},
|
|
{0x37cc, 0x15},
|
|
{0x37cd, 0x1f},
|
|
{0x37ce, 0x1f},
|
|
};
|
|
|
|
static const struct ov5675_reg mode_1296x972_regs[] = {
|
|
{0x3002, 0x21},
|
|
{0x3107, 0x23},
|
|
{0x3501, 0x20},
|
|
{0x3503, 0x0c},
|
|
{0x3508, 0x03},
|
|
{0x3509, 0x00},
|
|
{0x3600, 0x66},
|
|
{0x3602, 0x30},
|
|
{0x3610, 0xa5},
|
|
{0x3612, 0x93},
|
|
{0x3620, 0x80},
|
|
{0x3642, 0x0e},
|
|
{0x3661, 0x00},
|
|
{0x3662, 0x08},
|
|
{0x3664, 0xf3},
|
|
{0x3665, 0x9e},
|
|
{0x3667, 0xa5},
|
|
{0x366e, 0x55},
|
|
{0x366f, 0x55},
|
|
{0x3670, 0x11},
|
|
{0x3671, 0x11},
|
|
{0x3672, 0x11},
|
|
{0x3673, 0x11},
|
|
{0x3714, 0x28},
|
|
{0x371a, 0x3e},
|
|
{0x3733, 0x10},
|
|
{0x3734, 0x00},
|
|
{0x373d, 0x24},
|
|
{0x3764, 0x20},
|
|
{0x3765, 0x20},
|
|
{0x3766, 0x12},
|
|
{0x37a1, 0x14},
|
|
{0x37a8, 0x1c},
|
|
{0x37ab, 0x0f},
|
|
{0x37c2, 0x14},
|
|
{0x37cb, 0x00},
|
|
{0x37cc, 0x00},
|
|
{0x37cd, 0x00},
|
|
{0x37ce, 0x00},
|
|
{0x37d8, 0x02},
|
|
{0x37d9, 0x04},
|
|
{0x37dc, 0x04},
|
|
{0x3800, 0x00},
|
|
{0x3801, 0x00},
|
|
{0x3802, 0x00},
|
|
{0x3803, 0x00},
|
|
{0x3804, 0x0a},
|
|
{0x3805, 0x3f},
|
|
{0x3806, 0x07},
|
|
{0x3807, 0xb7},
|
|
{0x3808, 0x05},
|
|
{0x3809, 0x10},
|
|
{0x380a, 0x03},
|
|
{0x380b, 0xcc},
|
|
{0x380c, 0x02},
|
|
{0x380d, 0xee},
|
|
{0x380e, 0x07},
|
|
{0x380f, 0xd0},
|
|
{0x3811, 0x08},
|
|
{0x3813, 0x0d},
|
|
{0x3814, 0x03},
|
|
{0x3815, 0x01},
|
|
{0x3816, 0x03},
|
|
{0x3817, 0x01},
|
|
{0x381e, 0x02},
|
|
{0x3820, 0x8b},
|
|
{0x3821, 0x01},
|
|
{0x3832, 0x04},
|
|
{0x3c80, 0x01},
|
|
{0x3c82, 0x00},
|
|
{0x3c83, 0xc8},
|
|
{0x3c8c, 0x0f},
|
|
{0x3c8d, 0xa0},
|
|
{0x3c90, 0x07},
|
|
{0x3c91, 0x00},
|
|
{0x3c92, 0x00},
|
|
{0x3c93, 0x00},
|
|
{0x3c94, 0xd0},
|
|
{0x3c95, 0x50},
|
|
{0x3c96, 0x35},
|
|
{0x3c97, 0x00},
|
|
{0x4001, 0xe0},
|
|
{0x4008, 0x00},
|
|
{0x4009, 0x07},
|
|
{0x400f, 0x80},
|
|
{0x4013, 0x02},
|
|
{0x4040, 0x00},
|
|
{0x4041, 0x03},
|
|
{0x404c, 0x50},
|
|
{0x404e, 0x20},
|
|
{0x4500, 0x06},
|
|
{0x4503, 0x00},
|
|
{0x450a, 0x04},
|
|
{0x4809, 0x04},
|
|
{0x480c, 0x12},
|
|
{0x4819, 0x70},
|
|
{0x4825, 0x32},
|
|
{0x4826, 0x32},
|
|
{0x482a, 0x06},
|
|
{0x4833, 0x08},
|
|
{0x4837, 0x0d},
|
|
{0x5000, 0x77},
|
|
{0x5b00, 0x01},
|
|
{0x5b01, 0x10},
|
|
{0x5b02, 0x01},
|
|
{0x5b03, 0xdb},
|
|
{0x5b05, 0x6c},
|
|
{0x5e10, 0xfc},
|
|
{0x3500, 0x00},
|
|
{0x3501, 0x1F},
|
|
{0x3502, 0x20},
|
|
{0x3503, 0x08},
|
|
{0x3508, 0x04},
|
|
{0x3509, 0x00},
|
|
{0x3832, 0x48},
|
|
{0x5780, 0x3e},
|
|
{0x5781, 0x0f},
|
|
{0x5782, 0x44},
|
|
{0x5783, 0x02},
|
|
{0x5784, 0x01},
|
|
{0x5785, 0x01},
|
|
{0x5786, 0x00},
|
|
{0x5787, 0x04},
|
|
{0x5788, 0x02},
|
|
{0x5789, 0x0f},
|
|
{0x578a, 0xfd},
|
|
{0x578b, 0xf5},
|
|
{0x578c, 0xf5},
|
|
{0x578d, 0x03},
|
|
{0x578e, 0x08},
|
|
{0x578f, 0x0c},
|
|
{0x5790, 0x08},
|
|
{0x5791, 0x06},
|
|
{0x5792, 0x00},
|
|
{0x5793, 0x52},
|
|
{0x5794, 0xa3},
|
|
{0x4003, 0x40},
|
|
{0x3107, 0x01},
|
|
{0x3c80, 0x08},
|
|
{0x3c83, 0xb1},
|
|
{0x3c8c, 0x10},
|
|
{0x3c8d, 0x00},
|
|
{0x3c90, 0x00},
|
|
{0x3c94, 0x00},
|
|
{0x3c95, 0x00},
|
|
{0x3c96, 0x00},
|
|
{0x37cb, 0x09},
|
|
{0x37cc, 0x15},
|
|
{0x37cd, 0x1f},
|
|
{0x37ce, 0x1f},
|
|
};
|
|
|
|
static const char * const ov5675_test_pattern_menu[] = {
|
|
"Disabled",
|
|
"Standard Color Bar",
|
|
"Top-Bottom Darker Color Bar",
|
|
"Right-Left Darker Color Bar",
|
|
"Bottom-Top Darker Color Bar"
|
|
};
|
|
|
|
static const s64 link_freq_menu_items[] = {
|
|
OV5675_LINK_FREQ_450MHZ,
|
|
};
|
|
|
|
static const struct ov5675_link_freq_config link_freq_configs[] = {
|
|
[OV5675_LINK_FREQ_900MBPS] = {
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mipi_data_rate_900mbps),
|
|
.regs = mipi_data_rate_900mbps,
|
|
}
|
|
}
|
|
};
|
|
|
|
static const struct ov5675_mode supported_modes[] = {
|
|
{
|
|
.width = 2592,
|
|
.height = 1944,
|
|
.hts = 1500,
|
|
.vts_def = OV5675_VTS_30FPS,
|
|
.vts_min = OV5675_VTS_30FPS_MIN,
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mode_2592x1944_regs),
|
|
.regs = mode_2592x1944_regs,
|
|
},
|
|
.link_freq_index = OV5675_LINK_FREQ_900MBPS,
|
|
},
|
|
{
|
|
.width = 1296,
|
|
.height = 972,
|
|
.hts = 1500,
|
|
.vts_def = OV5675_VTS_30FPS,
|
|
.vts_min = OV5675_VTS_30FPS_MIN,
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mode_1296x972_regs),
|
|
.regs = mode_1296x972_regs,
|
|
},
|
|
.link_freq_index = OV5675_LINK_FREQ_900MBPS,
|
|
}
|
|
};
|
|
|
|
struct ov5675 {
|
|
struct v4l2_subdev sd;
|
|
struct media_pad pad;
|
|
struct v4l2_ctrl_handler ctrl_handler;
|
|
|
|
/* V4L2 Controls */
|
|
struct v4l2_ctrl *link_freq;
|
|
struct v4l2_ctrl *pixel_rate;
|
|
struct v4l2_ctrl *vblank;
|
|
struct v4l2_ctrl *hblank;
|
|
struct v4l2_ctrl *exposure;
|
|
|
|
/* Current mode */
|
|
const struct ov5675_mode *cur_mode;
|
|
|
|
/* To serialize asynchronus callbacks */
|
|
struct mutex mutex;
|
|
|
|
/* Streaming on/off */
|
|
bool streaming;
|
|
|
|
/* True if the device has been identified */
|
|
bool identified;
|
|
};
|
|
|
|
static u64 to_pixel_rate(u32 f_index)
|
|
{
|
|
u64 pixel_rate = link_freq_menu_items[f_index] * 2 * OV5675_DATA_LANES;
|
|
|
|
do_div(pixel_rate, OV5675_RGB_DEPTH);
|
|
|
|
return pixel_rate;
|
|
}
|
|
|
|
static u64 to_pixels_per_line(u32 hts, u32 f_index)
|
|
{
|
|
u64 ppl = hts * to_pixel_rate(f_index);
|
|
|
|
do_div(ppl, OV5675_SCLK);
|
|
|
|
return ppl;
|
|
}
|
|
|
|
static int ov5675_read_reg(struct ov5675 *ov5675, u16 reg, u16 len, u32 *val)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&ov5675->sd);
|
|
struct i2c_msg msgs[2];
|
|
u8 addr_buf[2];
|
|
u8 data_buf[4] = {0};
|
|
int ret;
|
|
|
|
if (len > 4)
|
|
return -EINVAL;
|
|
|
|
put_unaligned_be16(reg, addr_buf);
|
|
msgs[0].addr = client->addr;
|
|
msgs[0].flags = 0;
|
|
msgs[0].len = sizeof(addr_buf);
|
|
msgs[0].buf = addr_buf;
|
|
msgs[1].addr = client->addr;
|
|
msgs[1].flags = I2C_M_RD;
|
|
msgs[1].len = len;
|
|
msgs[1].buf = &data_buf[4 - len];
|
|
|
|
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (ret != ARRAY_SIZE(msgs))
|
|
return -EIO;
|
|
|
|
*val = get_unaligned_be32(data_buf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov5675_write_reg(struct ov5675 *ov5675, u16 reg, u16 len, u32 val)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&ov5675->sd);
|
|
u8 buf[6];
|
|
|
|
if (len > 4)
|
|
return -EINVAL;
|
|
|
|
put_unaligned_be16(reg, buf);
|
|
put_unaligned_be32(val << 8 * (4 - len), buf + 2);
|
|
if (i2c_master_send(client, buf, len + 2) != len + 2)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov5675_write_reg_list(struct ov5675 *ov5675,
|
|
const struct ov5675_reg_list *r_list)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&ov5675->sd);
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < r_list->num_of_regs; i++) {
|
|
ret = ov5675_write_reg(ov5675, r_list->regs[i].address, 1,
|
|
r_list->regs[i].val);
|
|
if (ret) {
|
|
dev_err_ratelimited(&client->dev,
|
|
"failed to write reg 0x%4.4x. error = %d",
|
|
r_list->regs[i].address, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov5675_update_digital_gain(struct ov5675 *ov5675, u32 d_gain)
|
|
{
|
|
int ret;
|
|
|
|
ret = ov5675_write_reg(ov5675, OV5675_REG_GROUP_ACCESS,
|
|
OV5675_REG_VALUE_08BIT,
|
|
OV5675_GROUP_HOLD_START);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ov5675_write_reg(ov5675, OV5675_REG_MWB_R_GAIN,
|
|
OV5675_REG_VALUE_16BIT, d_gain);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ov5675_write_reg(ov5675, OV5675_REG_MWB_G_GAIN,
|
|
OV5675_REG_VALUE_16BIT, d_gain);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ov5675_write_reg(ov5675, OV5675_REG_MWB_B_GAIN,
|
|
OV5675_REG_VALUE_16BIT, d_gain);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ov5675_write_reg(ov5675, OV5675_REG_GROUP_ACCESS,
|
|
OV5675_REG_VALUE_08BIT,
|
|
OV5675_GROUP_HOLD_END);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ov5675_write_reg(ov5675, OV5675_REG_GROUP_ACCESS,
|
|
OV5675_REG_VALUE_08BIT,
|
|
OV5675_GROUP_HOLD_LAUNCH);
|
|
return ret;
|
|
}
|
|
|
|
static int ov5675_test_pattern(struct ov5675 *ov5675, u32 pattern)
|
|
{
|
|
if (pattern)
|
|
pattern = (pattern - 1) << OV5675_TEST_PATTERN_BAR_SHIFT |
|
|
OV5675_TEST_PATTERN_ENABLE;
|
|
|
|
return ov5675_write_reg(ov5675, OV5675_REG_TEST_PATTERN,
|
|
OV5675_REG_VALUE_08BIT, pattern);
|
|
}
|
|
|
|
/*
|
|
* OV5675 supports keeping the pixel order by mirror and flip function
|
|
* The Bayer order isn't affected by the flip controls
|
|
*/
|
|
static int ov5675_set_ctrl_hflip(struct ov5675 *ov5675, u32 ctrl_val)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = ov5675_read_reg(ov5675, OV5675_REG_FORMAT1,
|
|
OV5675_REG_VALUE_08BIT, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ov5675_write_reg(ov5675, OV5675_REG_FORMAT1,
|
|
OV5675_REG_VALUE_08BIT,
|
|
ctrl_val ? val & ~BIT(3) : val | BIT(3));
|
|
}
|
|
|
|
static int ov5675_set_ctrl_vflip(struct ov5675 *ov5675, u8 ctrl_val)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = ov5675_read_reg(ov5675, OV5675_REG_FORMAT1,
|
|
OV5675_REG_VALUE_08BIT, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ov5675_write_reg(ov5675, OV5675_REG_FORMAT1,
|
|
OV5675_REG_VALUE_08BIT,
|
|
ctrl_val ? val | BIT(4) | BIT(5) : val & ~BIT(4) & ~BIT(5));
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ov5675_read_reg(ov5675, OV5675_REG_FORMAT2,
|
|
OV5675_REG_VALUE_08BIT, &val);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ov5675_write_reg(ov5675, OV5675_REG_FORMAT2,
|
|
OV5675_REG_VALUE_08BIT,
|
|
ctrl_val ? val | BIT(1) : val & ~BIT(1));
|
|
}
|
|
|
|
static int ov5675_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct ov5675 *ov5675 = container_of(ctrl->handler,
|
|
struct ov5675, ctrl_handler);
|
|
struct i2c_client *client = v4l2_get_subdevdata(&ov5675->sd);
|
|
s64 exposure_max;
|
|
int ret = 0;
|
|
|
|
/* Propagate change of current control to all related controls */
|
|
if (ctrl->id == V4L2_CID_VBLANK) {
|
|
/* Update max exposure while meeting expected vblanking */
|
|
exposure_max = ov5675->cur_mode->height + ctrl->val -
|
|
OV5675_EXPOSURE_MAX_MARGIN;
|
|
__v4l2_ctrl_modify_range(ov5675->exposure,
|
|
ov5675->exposure->minimum,
|
|
exposure_max, ov5675->exposure->step,
|
|
exposure_max);
|
|
}
|
|
|
|
/* V4L2 controls values will be applied only when power is already up */
|
|
if (!pm_runtime_get_if_in_use(&client->dev))
|
|
return 0;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_ANALOGUE_GAIN:
|
|
ret = ov5675_write_reg(ov5675, OV5675_REG_ANALOG_GAIN,
|
|
OV5675_REG_VALUE_16BIT, ctrl->val);
|
|
break;
|
|
|
|
case V4L2_CID_DIGITAL_GAIN:
|
|
ret = ov5675_update_digital_gain(ov5675, ctrl->val);
|
|
break;
|
|
|
|
case V4L2_CID_EXPOSURE:
|
|
/* 4 least significant bits of expsoure are fractional part
|
|
* val = val << 4
|
|
* for ov5675, the unit of exposure is differnt from other
|
|
* OmniVision sensors, its exposure value is twice of the
|
|
* register value, the exposure should be divided by 2 before
|
|
* set register, e.g. val << 3.
|
|
*/
|
|
ret = ov5675_write_reg(ov5675, OV5675_REG_EXPOSURE,
|
|
OV5675_REG_VALUE_24BIT, ctrl->val << 3);
|
|
break;
|
|
|
|
case V4L2_CID_VBLANK:
|
|
ret = ov5675_write_reg(ov5675, OV5675_REG_VTS,
|
|
OV5675_REG_VALUE_16BIT,
|
|
ov5675->cur_mode->height + ctrl->val +
|
|
10);
|
|
break;
|
|
|
|
case V4L2_CID_TEST_PATTERN:
|
|
ret = ov5675_test_pattern(ov5675, ctrl->val);
|
|
break;
|
|
|
|
case V4L2_CID_HFLIP:
|
|
ov5675_set_ctrl_hflip(ov5675, ctrl->val);
|
|
break;
|
|
|
|
case V4L2_CID_VFLIP:
|
|
ov5675_set_ctrl_vflip(ov5675, ctrl->val);
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
pm_runtime_put(&client->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops ov5675_ctrl_ops = {
|
|
.s_ctrl = ov5675_set_ctrl,
|
|
};
|
|
|
|
static int ov5675_init_controls(struct ov5675 *ov5675)
|
|
{
|
|
struct v4l2_ctrl_handler *ctrl_hdlr;
|
|
s64 exposure_max, h_blank;
|
|
int ret;
|
|
|
|
ctrl_hdlr = &ov5675->ctrl_handler;
|
|
ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ctrl_hdlr->lock = &ov5675->mutex;
|
|
ov5675->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, &ov5675_ctrl_ops,
|
|
V4L2_CID_LINK_FREQ,
|
|
ARRAY_SIZE(link_freq_menu_items) - 1,
|
|
0, link_freq_menu_items);
|
|
if (ov5675->link_freq)
|
|
ov5675->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
ov5675->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &ov5675_ctrl_ops,
|
|
V4L2_CID_PIXEL_RATE, 0,
|
|
to_pixel_rate(OV5675_LINK_FREQ_900MBPS),
|
|
1,
|
|
to_pixel_rate(OV5675_LINK_FREQ_900MBPS));
|
|
ov5675->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov5675_ctrl_ops,
|
|
V4L2_CID_VBLANK,
|
|
ov5675->cur_mode->vts_min - ov5675->cur_mode->height,
|
|
OV5675_VTS_MAX - ov5675->cur_mode->height, 1,
|
|
ov5675->cur_mode->vts_def - ov5675->cur_mode->height);
|
|
h_blank = to_pixels_per_line(ov5675->cur_mode->hts,
|
|
ov5675->cur_mode->link_freq_index) - ov5675->cur_mode->width;
|
|
ov5675->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov5675_ctrl_ops,
|
|
V4L2_CID_HBLANK, h_blank, h_blank, 1,
|
|
h_blank);
|
|
if (ov5675->hblank)
|
|
ov5675->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &ov5675_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
|
|
OV5675_ANAL_GAIN_MIN, OV5675_ANAL_GAIN_MAX,
|
|
OV5675_ANAL_GAIN_STEP, OV5675_ANAL_GAIN_MIN);
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &ov5675_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
|
|
OV5675_DGTL_GAIN_MIN, OV5675_DGTL_GAIN_MAX,
|
|
OV5675_DGTL_GAIN_STEP, OV5675_DGTL_GAIN_DEFAULT);
|
|
exposure_max = (ov5675->cur_mode->vts_def - OV5675_EXPOSURE_MAX_MARGIN);
|
|
ov5675->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &ov5675_ctrl_ops,
|
|
V4L2_CID_EXPOSURE,
|
|
OV5675_EXPOSURE_MIN, exposure_max,
|
|
OV5675_EXPOSURE_STEP,
|
|
exposure_max);
|
|
v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &ov5675_ctrl_ops,
|
|
V4L2_CID_TEST_PATTERN,
|
|
ARRAY_SIZE(ov5675_test_pattern_menu) - 1,
|
|
0, 0, ov5675_test_pattern_menu);
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &ov5675_ctrl_ops,
|
|
V4L2_CID_HFLIP, 0, 1, 1, 0);
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &ov5675_ctrl_ops,
|
|
V4L2_CID_VFLIP, 0, 1, 1, 0);
|
|
|
|
if (ctrl_hdlr->error)
|
|
return ctrl_hdlr->error;
|
|
|
|
ov5675->sd.ctrl_handler = ctrl_hdlr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ov5675_update_pad_format(const struct ov5675_mode *mode,
|
|
struct v4l2_mbus_framefmt *fmt)
|
|
{
|
|
fmt->width = mode->width;
|
|
fmt->height = mode->height;
|
|
fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
|
|
fmt->field = V4L2_FIELD_NONE;
|
|
}
|
|
|
|
static int ov5675_identify_module(struct ov5675 *ov5675)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&ov5675->sd);
|
|
int ret;
|
|
u32 val;
|
|
|
|
if (ov5675->identified)
|
|
return 0;
|
|
|
|
ret = ov5675_read_reg(ov5675, OV5675_REG_CHIP_ID,
|
|
OV5675_REG_VALUE_24BIT, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val != OV5675_CHIP_ID) {
|
|
dev_err(&client->dev, "chip id mismatch: %x!=%x",
|
|
OV5675_CHIP_ID, val);
|
|
return -ENXIO;
|
|
}
|
|
|
|
ov5675->identified = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov5675_start_streaming(struct ov5675 *ov5675)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&ov5675->sd);
|
|
const struct ov5675_reg_list *reg_list;
|
|
int link_freq_index, ret;
|
|
|
|
ret = ov5675_identify_module(ov5675);
|
|
if (ret)
|
|
return ret;
|
|
|
|
link_freq_index = ov5675->cur_mode->link_freq_index;
|
|
reg_list = &link_freq_configs[link_freq_index].reg_list;
|
|
ret = ov5675_write_reg_list(ov5675, reg_list);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to set plls");
|
|
return ret;
|
|
}
|
|
|
|
reg_list = &ov5675->cur_mode->reg_list;
|
|
ret = ov5675_write_reg_list(ov5675, reg_list);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to set mode");
|
|
return ret;
|
|
}
|
|
|
|
ret = __v4l2_ctrl_handler_setup(ov5675->sd.ctrl_handler);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ov5675_write_reg(ov5675, OV5675_REG_MODE_SELECT,
|
|
OV5675_REG_VALUE_08BIT, OV5675_MODE_STREAMING);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to set stream");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ov5675_stop_streaming(struct ov5675 *ov5675)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&ov5675->sd);
|
|
|
|
if (ov5675_write_reg(ov5675, OV5675_REG_MODE_SELECT,
|
|
OV5675_REG_VALUE_08BIT, OV5675_MODE_STANDBY))
|
|
dev_err(&client->dev, "failed to set stream");
|
|
}
|
|
|
|
static int ov5675_set_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
struct ov5675 *ov5675 = to_ov5675(sd);
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
int ret = 0;
|
|
|
|
if (ov5675->streaming == enable)
|
|
return 0;
|
|
|
|
mutex_lock(&ov5675->mutex);
|
|
if (enable) {
|
|
ret = pm_runtime_resume_and_get(&client->dev);
|
|
if (ret < 0) {
|
|
mutex_unlock(&ov5675->mutex);
|
|
return ret;
|
|
}
|
|
|
|
ret = ov5675_start_streaming(ov5675);
|
|
if (ret) {
|
|
enable = 0;
|
|
ov5675_stop_streaming(ov5675);
|
|
pm_runtime_put(&client->dev);
|
|
}
|
|
} else {
|
|
ov5675_stop_streaming(ov5675);
|
|
pm_runtime_put(&client->dev);
|
|
}
|
|
|
|
ov5675->streaming = enable;
|
|
mutex_unlock(&ov5675->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused ov5675_suspend(struct device *dev)
|
|
{
|
|
struct v4l2_subdev *sd = dev_get_drvdata(dev);
|
|
struct ov5675 *ov5675 = to_ov5675(sd);
|
|
|
|
mutex_lock(&ov5675->mutex);
|
|
if (ov5675->streaming)
|
|
ov5675_stop_streaming(ov5675);
|
|
|
|
mutex_unlock(&ov5675->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused ov5675_resume(struct device *dev)
|
|
{
|
|
struct v4l2_subdev *sd = dev_get_drvdata(dev);
|
|
struct ov5675 *ov5675 = to_ov5675(sd);
|
|
int ret;
|
|
|
|
mutex_lock(&ov5675->mutex);
|
|
if (ov5675->streaming) {
|
|
ret = ov5675_start_streaming(ov5675);
|
|
if (ret) {
|
|
ov5675->streaming = false;
|
|
ov5675_stop_streaming(ov5675);
|
|
mutex_unlock(&ov5675->mutex);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&ov5675->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov5675_set_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct ov5675 *ov5675 = to_ov5675(sd);
|
|
const struct ov5675_mode *mode;
|
|
s32 vblank_def, h_blank;
|
|
|
|
mode = v4l2_find_nearest_size(supported_modes,
|
|
ARRAY_SIZE(supported_modes), width,
|
|
height, fmt->format.width,
|
|
fmt->format.height);
|
|
|
|
mutex_lock(&ov5675->mutex);
|
|
ov5675_update_pad_format(mode, &fmt->format);
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
*v4l2_subdev_get_try_format(sd, sd_state, fmt->pad) = fmt->format;
|
|
} else {
|
|
ov5675->cur_mode = mode;
|
|
__v4l2_ctrl_s_ctrl(ov5675->link_freq, mode->link_freq_index);
|
|
__v4l2_ctrl_s_ctrl_int64(ov5675->pixel_rate,
|
|
to_pixel_rate(mode->link_freq_index));
|
|
|
|
/* Update limits and set FPS to default */
|
|
vblank_def = mode->vts_def - mode->height;
|
|
__v4l2_ctrl_modify_range(ov5675->vblank,
|
|
mode->vts_min - mode->height,
|
|
OV5675_VTS_MAX - mode->height, 1,
|
|
vblank_def);
|
|
__v4l2_ctrl_s_ctrl(ov5675->vblank, vblank_def);
|
|
h_blank = to_pixels_per_line(mode->hts, mode->link_freq_index) -
|
|
mode->width;
|
|
__v4l2_ctrl_modify_range(ov5675->hblank, h_blank, h_blank, 1,
|
|
h_blank);
|
|
}
|
|
|
|
mutex_unlock(&ov5675->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov5675_get_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct ov5675 *ov5675 = to_ov5675(sd);
|
|
|
|
mutex_lock(&ov5675->mutex);
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
|
|
fmt->format = *v4l2_subdev_get_try_format(&ov5675->sd,
|
|
sd_state,
|
|
fmt->pad);
|
|
else
|
|
ov5675_update_pad_format(ov5675->cur_mode, &fmt->format);
|
|
|
|
mutex_unlock(&ov5675->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov5675_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
if (code->index > 0)
|
|
return -EINVAL;
|
|
|
|
code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov5675_enum_frame_size(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
{
|
|
if (fse->index >= ARRAY_SIZE(supported_modes))
|
|
return -EINVAL;
|
|
|
|
if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
|
|
return -EINVAL;
|
|
|
|
fse->min_width = supported_modes[fse->index].width;
|
|
fse->max_width = fse->min_width;
|
|
fse->min_height = supported_modes[fse->index].height;
|
|
fse->max_height = fse->min_height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov5675_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
|
{
|
|
struct ov5675 *ov5675 = to_ov5675(sd);
|
|
|
|
mutex_lock(&ov5675->mutex);
|
|
ov5675_update_pad_format(&supported_modes[0],
|
|
v4l2_subdev_get_try_format(sd, fh->state, 0));
|
|
mutex_unlock(&ov5675->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_subdev_video_ops ov5675_video_ops = {
|
|
.s_stream = ov5675_set_stream,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops ov5675_pad_ops = {
|
|
.set_fmt = ov5675_set_format,
|
|
.get_fmt = ov5675_get_format,
|
|
.enum_mbus_code = ov5675_enum_mbus_code,
|
|
.enum_frame_size = ov5675_enum_frame_size,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops ov5675_subdev_ops = {
|
|
.video = &ov5675_video_ops,
|
|
.pad = &ov5675_pad_ops,
|
|
};
|
|
|
|
static const struct media_entity_operations ov5675_subdev_entity_ops = {
|
|
.link_validate = v4l2_subdev_link_validate,
|
|
};
|
|
|
|
static const struct v4l2_subdev_internal_ops ov5675_internal_ops = {
|
|
.open = ov5675_open,
|
|
};
|
|
|
|
static int ov5675_check_hwcfg(struct device *dev)
|
|
{
|
|
struct fwnode_handle *ep;
|
|
struct fwnode_handle *fwnode = dev_fwnode(dev);
|
|
struct v4l2_fwnode_endpoint bus_cfg = {
|
|
.bus_type = V4L2_MBUS_CSI2_DPHY
|
|
};
|
|
u32 mclk;
|
|
int ret;
|
|
unsigned int i, j;
|
|
|
|
if (!fwnode)
|
|
return -ENXIO;
|
|
|
|
ret = fwnode_property_read_u32(fwnode, "clock-frequency", &mclk);
|
|
|
|
if (ret) {
|
|
dev_err(dev, "can't get clock frequency");
|
|
return ret;
|
|
}
|
|
|
|
if (mclk != OV5675_MCLK) {
|
|
dev_err(dev, "external clock %d is not supported", mclk);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
|
|
if (!ep)
|
|
return -ENXIO;
|
|
|
|
ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
|
|
fwnode_handle_put(ep);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (bus_cfg.bus.mipi_csi2.num_data_lanes != OV5675_DATA_LANES) {
|
|
dev_err(dev, "number of CSI2 data lanes %d is not supported",
|
|
bus_cfg.bus.mipi_csi2.num_data_lanes);
|
|
ret = -EINVAL;
|
|
goto check_hwcfg_error;
|
|
}
|
|
|
|
if (!bus_cfg.nr_of_link_frequencies) {
|
|
dev_err(dev, "no link frequencies defined");
|
|
ret = -EINVAL;
|
|
goto check_hwcfg_error;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(link_freq_menu_items); i++) {
|
|
for (j = 0; j < bus_cfg.nr_of_link_frequencies; j++) {
|
|
if (link_freq_menu_items[i] ==
|
|
bus_cfg.link_frequencies[j])
|
|
break;
|
|
}
|
|
|
|
if (j == bus_cfg.nr_of_link_frequencies) {
|
|
dev_err(dev, "no link frequency %lld supported",
|
|
link_freq_menu_items[i]);
|
|
ret = -EINVAL;
|
|
goto check_hwcfg_error;
|
|
}
|
|
}
|
|
|
|
check_hwcfg_error:
|
|
v4l2_fwnode_endpoint_free(&bus_cfg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ov5675_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct ov5675 *ov5675 = to_ov5675(sd);
|
|
|
|
v4l2_async_unregister_subdev(sd);
|
|
media_entity_cleanup(&sd->entity);
|
|
v4l2_ctrl_handler_free(sd->ctrl_handler);
|
|
pm_runtime_disable(&client->dev);
|
|
mutex_destroy(&ov5675->mutex);
|
|
}
|
|
|
|
static int ov5675_probe(struct i2c_client *client)
|
|
{
|
|
struct ov5675 *ov5675;
|
|
bool full_power;
|
|
int ret;
|
|
|
|
ret = ov5675_check_hwcfg(&client->dev);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to check HW configuration: %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ov5675 = devm_kzalloc(&client->dev, sizeof(*ov5675), GFP_KERNEL);
|
|
if (!ov5675)
|
|
return -ENOMEM;
|
|
|
|
v4l2_i2c_subdev_init(&ov5675->sd, client, &ov5675_subdev_ops);
|
|
|
|
full_power = acpi_dev_state_d0(&client->dev);
|
|
if (full_power) {
|
|
ret = ov5675_identify_module(ov5675);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to find sensor: %d", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
mutex_init(&ov5675->mutex);
|
|
ov5675->cur_mode = &supported_modes[0];
|
|
ret = ov5675_init_controls(ov5675);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to init controls: %d", ret);
|
|
goto probe_error_v4l2_ctrl_handler_free;
|
|
}
|
|
|
|
ov5675->sd.internal_ops = &ov5675_internal_ops;
|
|
ov5675->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
ov5675->sd.entity.ops = &ov5675_subdev_entity_ops;
|
|
ov5675->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
ov5675->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
ret = media_entity_pads_init(&ov5675->sd.entity, 1, &ov5675->pad);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to init entity pads: %d", ret);
|
|
goto probe_error_v4l2_ctrl_handler_free;
|
|
}
|
|
|
|
ret = v4l2_async_register_subdev_sensor(&ov5675->sd);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "failed to register V4L2 subdev: %d",
|
|
ret);
|
|
goto probe_error_media_entity_cleanup;
|
|
}
|
|
|
|
/*
|
|
* Device is already turned on by i2c-core with ACPI domain PM.
|
|
* Enable runtime PM and turn off the device.
|
|
*/
|
|
|
|
/* Set the device's state to active if it's in D0 state. */
|
|
if (full_power)
|
|
pm_runtime_set_active(&client->dev);
|
|
pm_runtime_enable(&client->dev);
|
|
pm_runtime_idle(&client->dev);
|
|
|
|
return 0;
|
|
|
|
probe_error_media_entity_cleanup:
|
|
media_entity_cleanup(&ov5675->sd.entity);
|
|
|
|
probe_error_v4l2_ctrl_handler_free:
|
|
v4l2_ctrl_handler_free(ov5675->sd.ctrl_handler);
|
|
mutex_destroy(&ov5675->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dev_pm_ops ov5675_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(ov5675_suspend, ov5675_resume)
|
|
};
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id ov5675_acpi_ids[] = {
|
|
{"OVTI5675"},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(acpi, ov5675_acpi_ids);
|
|
#endif
|
|
|
|
static struct i2c_driver ov5675_i2c_driver = {
|
|
.driver = {
|
|
.name = "ov5675",
|
|
.pm = &ov5675_pm_ops,
|
|
.acpi_match_table = ACPI_PTR(ov5675_acpi_ids),
|
|
},
|
|
.probe_new = ov5675_probe,
|
|
.remove = ov5675_remove,
|
|
.flags = I2C_DRV_ACPI_WAIVE_D0_PROBE,
|
|
};
|
|
|
|
module_i2c_driver(ov5675_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Shawn Tu <shawnx.tu@intel.com>");
|
|
MODULE_DESCRIPTION("OmniVision OV5675 sensor driver");
|
|
MODULE_LICENSE("GPL v2");
|