9ea6feb681
File snps,dwc3.yaml describes the schema of Synopsys DesignWare USB3
Controller, it directly or indirectly contains "$ref: usb.yaml". So the
node name of "snps,dwc3" must start with "usb". Otherwise, the following
warning will be displayed:
Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.example.dt.yaml: \
dwc3@38100000: $nodename:0: 'dwc3@38100000' does not match '^usb(@.*)?'
From schema: Documentation/devicetree/bindings/usb/snps,dwc3.yaml
In addition, replace "type: object" with "$ref: snps,dwc3.yaml#". Ensure
that all properties of the child node comply with snps,dwc3.yaml.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210329072714.2135-2-thunder.leizhen@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
103 lines
2.5 KiB
YAML
103 lines
2.5 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
# Copyright (c) 2020 NXP
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: NXP iMX8MP Soc USB Controller
|
|
|
|
maintainers:
|
|
- Li Jun <jun.li@nxp.com>
|
|
|
|
properties:
|
|
compatible:
|
|
const: fsl,imx8mp-dwc3
|
|
|
|
reg:
|
|
maxItems: 1
|
|
description: Address and length of the register set for the wrapper of
|
|
dwc3 core on the SOC.
|
|
|
|
"#address-cells":
|
|
enum: [ 1, 2 ]
|
|
|
|
"#size-cells":
|
|
enum: [ 1, 2 ]
|
|
|
|
dma-ranges:
|
|
description:
|
|
See section 2.3.9 of the DeviceTree Specification.
|
|
|
|
ranges: true
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
description: The interrupt that is asserted when a wakeup event is
|
|
received.
|
|
|
|
clocks:
|
|
description:
|
|
A list of phandle and clock-specifier pairs for the clocks
|
|
listed in clock-names.
|
|
items:
|
|
- description: system hsio root clock.
|
|
- description: suspend clock, used for usb wakeup logic.
|
|
|
|
clock-names:
|
|
items:
|
|
- const: hsio
|
|
- const: suspend
|
|
|
|
# Required child node:
|
|
|
|
patternProperties:
|
|
"^usb@[0-9a-f]+$":
|
|
$ref: snps,dwc3.yaml#
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- "#address-cells"
|
|
- "#size-cells"
|
|
- dma-ranges
|
|
- ranges
|
|
- clocks
|
|
- clock-names
|
|
- interrupts
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/imx8mp-clock.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
usb3_0: usb@32f10100 {
|
|
compatible = "fsl,imx8mp-dwc3";
|
|
reg = <0x32f10100 0x8>;
|
|
clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
|
|
<&clk IMX8MP_CLK_USB_ROOT>;
|
|
clock-names = "hsio", "suspend";
|
|
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
dma-ranges = <0x40000000 0x40000000 0xc0000000>;
|
|
ranges;
|
|
|
|
usb@38100000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x38100000 0x10000>;
|
|
clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
|
|
<&clk IMX8MP_CLK_USB_CORE_REF>,
|
|
<&clk IMX8MP_CLK_USB_ROOT>;
|
|
clock-names = "bus_early", "ref", "suspend";
|
|
assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
|
|
assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
|
|
assigned-clock-rates = <500000000>;
|
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&usb3_phy0>, <&usb3_phy0>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
snps,dis-u2-freeclk-exists-quirk;
|
|
};
|
|
};
|