Go to file
Mariusz Tkaczyk 57668f0a4c raid5: introduce MD_BROKEN
Raid456 module had allowed to achieve failed state. It was fixed by
fb73b357fb ("raid5: block failing device if raid will be failed").
This fix introduces a bug, now if raid5 fails during IO, it may result
with a hung task without completion. Faulty flag on the device is
necessary to process all requests and is checked many times, mainly in
analyze_stripe().
Allow to set faulty on drive again and set MD_BROKEN if raid is failed.

As a result, this level is allowed to achieve failed state again, but
communication with userspace (via -EBUSY status) will be preserved.

This restores possibility to fail array via #mdadm --set-faulty command
and will be fixed by additional verification on mdadm side.

Reproduction steps:
 mdadm -CR imsm -e imsm -n 3 /dev/nvme[0-2]n1
 mdadm -CR r5 -e imsm -l5 -n3 /dev/nvme[0-2]n1 --assume-clean
 mkfs.xfs /dev/md126 -f
 mount /dev/md126 /mnt/root/

 fio --filename=/mnt/root/file --size=5GB --direct=1 --rw=randrw
--bs=64k --ioengine=libaio --iodepth=64 --runtime=240 --numjobs=4
--time_based --group_reporting --name=throughput-test-job
--eta-newline=1 &

 echo 1 > /sys/block/nvme2n1/device/device/remove
 echo 1 > /sys/block/nvme1n1/device/device/remove

 [ 1475.787779] Call Trace:
 [ 1475.793111] __schedule+0x2a6/0x700
 [ 1475.799460] schedule+0x38/0xa0
 [ 1475.805454] raid5_get_active_stripe+0x469/0x5f0 [raid456]
 [ 1475.813856] ? finish_wait+0x80/0x80
 [ 1475.820332] raid5_make_request+0x180/0xb40 [raid456]
 [ 1475.828281] ? finish_wait+0x80/0x80
 [ 1475.834727] ? finish_wait+0x80/0x80
 [ 1475.841127] ? finish_wait+0x80/0x80
 [ 1475.847480] md_handle_request+0x119/0x190
 [ 1475.854390] md_make_request+0x8a/0x190
 [ 1475.861041] generic_make_request+0xcf/0x310
 [ 1475.868145] submit_bio+0x3c/0x160
 [ 1475.874355] iomap_dio_submit_bio.isra.20+0x51/0x60
 [ 1475.882070] iomap_dio_bio_actor+0x175/0x390
 [ 1475.889149] iomap_apply+0xff/0x310
 [ 1475.895447] ? iomap_dio_bio_actor+0x390/0x390
 [ 1475.902736] ? iomap_dio_bio_actor+0x390/0x390
 [ 1475.909974] iomap_dio_rw+0x2f2/0x490
 [ 1475.916415] ? iomap_dio_bio_actor+0x390/0x390
 [ 1475.923680] ? atime_needs_update+0x77/0xe0
 [ 1475.930674] ? xfs_file_dio_aio_read+0x6b/0xe0 [xfs]
 [ 1475.938455] xfs_file_dio_aio_read+0x6b/0xe0 [xfs]
 [ 1475.946084] xfs_file_read_iter+0xba/0xd0 [xfs]
 [ 1475.953403] aio_read+0xd5/0x180
 [ 1475.959395] ? _cond_resched+0x15/0x30
 [ 1475.965907] io_submit_one+0x20b/0x3c0
 [ 1475.972398] __x64_sys_io_submit+0xa2/0x180
 [ 1475.979335] ? do_io_getevents+0x7c/0xc0
 [ 1475.986009] do_syscall_64+0x5b/0x1a0
 [ 1475.992419] entry_SYSCALL_64_after_hwframe+0x65/0xca
 [ 1476.000255] RIP: 0033:0x7f11fc27978d
 [ 1476.006631] Code: Bad RIP value.
 [ 1476.073251] INFO: task fio:3877 blocked for more than 120 seconds.

Cc: stable@vger.kernel.org
Fixes: fb73b357fb ("raid5: block failing device if raid will be failed")
Reviewd-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
2022-04-25 14:00:35 -07:00
arch block: remove QUEUE_FLAG_DISCARD 2022-04-17 19:49:59 -06:00
block block: turn bdev->bd_openers into an atomic_t 2022-04-18 06:54:09 -06:00
certs Kbuild updates for v5.18 2022-03-31 11:59:03 -07:00
crypto for-5.18/64bit-pi-2022-03-25 2022-03-26 12:01:35 -07:00
Documentation Devicetree fixes for v5.18, part 2: 2022-04-16 17:07:50 -07:00
drivers raid5: introduce MD_BROKEN 2022-04-25 14:00:35 -07:00
fs direct-io: remove random prefetches 2022-04-17 19:50:02 -06:00
include block: turn bdev->bd_openers into an atomic_t 2022-04-18 06:54:09 -06:00
init Kbuild updates for v5.18 2022-03-31 11:59:03 -07:00
ipc fs: allocate inode by using alloc_inode_sb() 2022-03-22 15:57:03 -07:00
kernel A small set of fixes for the timers core: 2022-04-17 09:53:01 -07:00
lib Driver core changes for 5.18-rc2 2022-04-10 09:55:09 -10:00
LICENSES LICENSES/LGPL-2.1: Add LGPL-2.1-or-later as valid identifiers 2021-12-16 14:33:10 +01:00
mm block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD 2022-04-17 19:49:59 -06:00
net Networking fixes for 5.18-rc3, including fixes from wireless and 2022-04-14 11:58:19 -07:00
samples dma-mapping updates for Linux 5.18 2022-03-29 08:50:14 -07:00
scripts hardening fixes for v5.18-rc3 2022-04-12 14:29:40 -10:00
security hardening updates for v5.18-rc1-fix1 2022-03-31 11:43:01 -07:00
sound sound fixes for 5.18-rc3 2022-04-14 11:08:12 -07:00
tools Two x86 fixes related to TSX: 2022-04-17 09:55:59 -07:00
usr Kbuild updates for v5.18 2022-03-31 11:59:03 -07:00
virt KVM/arm64 fixes for 5.18, take #1 2022-04-08 12:30:04 -04:00
.clang-format genirq/msi: Make interrupt allocation less convoluted 2021-12-16 22:22:20 +01:00
.cocciconfig
.get_maintainer.ignore Opt out of scripts/get_maintainer.pl 2019-05-16 10:53:40 -07:00
.gitattributes .gitattributes: use 'dts' diff driver for dts files 2019-12-04 19:44:11 -08:00
.gitignore .gitignore: ignore only top-level modules.builtin 2021-05-02 00:43:35 +09:00
.mailmap mailmap: update Vasily Averin's email address 2022-04-08 14:20:36 -10:00
COPYING COPYING: state that all contributions really are covered by this file 2020-02-10 13:32:20 -08:00
CREDITS MAINTAINERS: replace a Microchip AT91 maintainer 2022-02-09 11:30:01 +01:00
Kbuild kbuild: rename hostprogs-y/always to hostprogs/always-y 2020-02-04 01:53:07 +09:00
Kconfig kbuild: ensure full rebuild when the compiler is updated 2020-05-12 13:28:33 +09:00
MAINTAINERS ARM: SoC fixes for 5.18, part 2 2022-04-16 16:51:39 -07:00
Makefile Linux 5.18-rc3 2022-04-17 13:57:31 -07:00
README Drop all 00-INDEX files from Documentation/ 2018-09-09 15:08:58 -06:00

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.