efb1a2d3d8
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This patchset adds a number of improvements for ES8336-based Intel platforms, which are not well supported at all in Linux. Since Christmas 2021, we've seen dozens of reports of broken audio [1]. The fundamental problem is that those platforms were built for Windows but using an I2S codec - instead of the HDaudio traditional solution. As a result, we are missing all the usual information needed to configure the audio card (which I2S, what configuration, DMICs or not, etc). The situation is similar to Baytrail with all possible permutations enabled. Some of the information can be discovered by checking the contents of the 'NHLT' ACPI table. This helps discover at run-time which SSP to use, and the number of microphones present. This NHLT-based solution helps remove quirks that were added earlier. Unfortunately, there are still a number of platform properties that are not described by ACPI, just as GPIOs used for speakers, jack detection inversion, etc. For some case, quirks are still provided in the machine drivers. Additional work will likely be needed, e.g. to detect which MCLK needs to be used, refine the UCM settings, add the ES8326 codec driver, but this is a first-step towards an 'out of the box' experience on Intel platforms. This patchset touches the sound/hda/intel-nhlt parts but should IMHO be merged in the ASoC tree. I would like to acknowledge the help of Nikolai Kostrigin, Mauro Carvalho Chehab, Huajun Li, David Yang (@yangxiaohua2009) and other GitHub testers. [1] https://github.com/thesofproject/linux/issues?q=is%3Aissue+is%3Aopen+label%3A%22codec+ES8336%22
687 lines
22 KiB
Plaintext
687 lines
22 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
menuconfig SND_SOC_INTEL_MACH
|
|
bool "Intel Machine drivers"
|
|
depends on SND_SOC_INTEL_SST_TOPLEVEL || SND_SOC_SOF_INTEL_TOPLEVEL
|
|
help
|
|
Intel ASoC Machine Drivers. If you have a Intel machine that
|
|
has an audio controller with a DSP and I2S or DMIC port, then
|
|
enable this option by saying Y
|
|
|
|
Note that the answer to this question doesn't directly affect the
|
|
kernel: saying N will just cause the configurator to skip all
|
|
the questions about Intel ASoC machine drivers.
|
|
|
|
if SND_SOC_INTEL_MACH
|
|
|
|
config SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES
|
|
bool "Use more user friendly long card names"
|
|
help
|
|
Some drivers report the I/O configuration to userspace through the
|
|
soundcard's long card name in the control user space AP. An unfortunate
|
|
side effect is that this long name may also be used by the GUI,
|
|
confusing users with information they don't need.
|
|
This option prevents the long name from being modified, and the I/O
|
|
configuration will be provided through a different component interface.
|
|
Select Y if userspace like UCM (Use Case Manager) uses the component
|
|
interface.
|
|
If unsure select N.
|
|
|
|
config SND_SOC_INTEL_HDA_DSP_COMMON
|
|
tristate
|
|
|
|
config SND_SOC_INTEL_SOF_MAXIM_COMMON
|
|
tristate
|
|
|
|
config SND_SOC_INTEL_SOF_REALTEK_COMMON
|
|
tristate
|
|
|
|
config SND_SOC_INTEL_SOF_CIRRUS_COMMON
|
|
tristate
|
|
|
|
if SND_SOC_INTEL_CATPT
|
|
|
|
config SND_SOC_INTEL_HASWELL_MACH
|
|
tristate "Haswell Lynxpoint"
|
|
depends on I2C
|
|
depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
|
|
depends on X86_INTEL_LPSS || COMPILE_TEST
|
|
select SND_SOC_RT5640
|
|
help
|
|
This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell
|
|
Ultrabook platforms. This is a recommended option.
|
|
Say Y or m if you have such a device.
|
|
If unsure select "N".
|
|
|
|
endif ## SND_SOC_INTEL_CATPT
|
|
|
|
if SND_SOC_INTEL_CATPT || SND_SOC_SOF_BROADWELL
|
|
|
|
config SND_SOC_INTEL_BDW_RT5650_MACH
|
|
tristate "Broadwell with RT5650 codec"
|
|
depends on I2C
|
|
depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
|
|
depends on X86_INTEL_LPSS || COMPILE_TEST
|
|
select SND_SOC_RT5645
|
|
help
|
|
This adds the ASoC machine driver for Intel Broadwell platforms with
|
|
the RT5650 codec.
|
|
Say Y if you have such a device.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_BDW_RT5677_MACH
|
|
tristate "Broadwell with RT5677 codec"
|
|
depends on I2C
|
|
depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
depends on X86_INTEL_LPSS || COMPILE_TEST
|
|
depends on SPI_MASTER
|
|
select SPI_PXA2XX
|
|
select SND_SOC_RT5677_SPI
|
|
select SND_SOC_RT5677
|
|
help
|
|
This adds support for Intel Broadwell platform based boards with
|
|
the RT5677 audio codec. This is a recommended option.
|
|
Say Y or m if you have such a device.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_BROADWELL_MACH
|
|
tristate "Broadwell Wildcatpoint"
|
|
depends on I2C
|
|
depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
|
|
depends on X86_INTEL_LPSS || COMPILE_TEST
|
|
select SND_SOC_RT286
|
|
help
|
|
This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell
|
|
Ultrabook platforms.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
endif ## SND_SOC_INTEL_CATPT || SND_SOC_SOF_BROADWELL
|
|
|
|
if SND_SST_ATOM_HIFI2_PLATFORM || SND_SOC_SOF_BAYTRAIL
|
|
|
|
config SND_SOC_INTEL_BYTCR_RT5640_MACH
|
|
tristate "Baytrail and Baytrail-CR with RT5640 codec"
|
|
depends on I2C && ACPI
|
|
depends on X86_INTEL_LPSS || COMPILE_TEST
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
select SND_SOC_ACPI
|
|
select SND_SOC_RT5640
|
|
help
|
|
This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR
|
|
platforms with RT5640 audio codec.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_BYTCR_RT5651_MACH
|
|
tristate "Baytrail and Baytrail-CR with RT5651 codec"
|
|
depends on I2C && ACPI
|
|
depends on X86_INTEL_LPSS || COMPILE_TEST
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
select SND_SOC_ACPI
|
|
select SND_SOC_RT5651
|
|
help
|
|
This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR
|
|
platforms with RT5651 audio codec.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_BYTCR_WM5102_MACH
|
|
tristate "Baytrail and Baytrail-CR with WM5102 codec"
|
|
depends on MFD_ARIZONA && MFD_WM5102 && SPI_MASTER && ACPI
|
|
depends on X86_INTEL_LPSS || COMPILE_TEST
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
select SND_SOC_ACPI
|
|
select SND_SOC_WM5102
|
|
help
|
|
This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR
|
|
platforms with WM5102 audio codec.
|
|
Say Y if you have such a device.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
|
|
tristate "Cherrytrail & Braswell with RT5672 codec"
|
|
depends on I2C && ACPI
|
|
depends on X86_INTEL_LPSS || COMPILE_TEST
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
select SND_SOC_ACPI
|
|
select SND_SOC_RT5670
|
|
help
|
|
This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
|
|
platforms with RT5672 audio codec.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
|
|
tristate "Cherrytrail & Braswell with RT5645/5650 codec"
|
|
depends on I2C && ACPI
|
|
depends on X86_INTEL_LPSS || COMPILE_TEST
|
|
select SND_SOC_ACPI
|
|
select SND_SOC_RT5645
|
|
help
|
|
This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
|
|
platforms with RT5645/5650 audio codec.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
|
|
tristate "Cherrytrail & Braswell with MAX98090 & TI codec"
|
|
depends on I2C && ACPI
|
|
depends on X86_INTEL_LPSS || COMPILE_TEST
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
select SND_SOC_MAX98090
|
|
select SND_SOC_TS3A227E
|
|
help
|
|
This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
|
|
platforms with MAX98090 audio codec it also can support TI jack chip as aux device.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_CHT_BSW_NAU8824_MACH
|
|
tristate "Cherrytrail & Braswell with NAU88L24 codec"
|
|
depends on I2C && ACPI
|
|
depends on X86_INTEL_LPSS || COMPILE_TEST
|
|
select SND_SOC_ACPI
|
|
select SND_SOC_NAU8824
|
|
help
|
|
This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
|
|
platforms with NAU88L24 audio codec.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_BYT_CHT_CX2072X_MACH
|
|
tristate "Baytrail & Cherrytrail with CX2072X codec"
|
|
depends on I2C && ACPI
|
|
depends on X86_INTEL_LPSS || COMPILE_TEST
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
select SND_SOC_ACPI
|
|
select SND_SOC_CX2072X
|
|
help
|
|
This adds support for ASoC machine driver for Intel(R) Baytrail &
|
|
Cherrytrail platforms with Conexant CX2072X audio codec.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
|
|
tristate "Baytrail & Cherrytrail with DA7212/7213 codec"
|
|
depends on I2C && ACPI
|
|
depends on X86_INTEL_LPSS || COMPILE_TEST
|
|
select SND_SOC_ACPI
|
|
select SND_SOC_DA7213
|
|
help
|
|
This adds support for ASoC machine driver for Intel(R) Baytrail & CherryTrail
|
|
platforms with DA7212/7213 audio codec.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
|
|
tristate "Baytrail & Cherrytrail with ES8316 codec"
|
|
depends on I2C && ACPI
|
|
depends on X86_INTEL_LPSS || COMPILE_TEST
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
select SND_SOC_ACPI
|
|
select SND_SOC_ES8316
|
|
help
|
|
This adds support for ASoC machine driver for Intel(R) Baytrail &
|
|
Cherrytrail platforms with ES8316 audio codec.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
endif ## SND_SST_ATOM_HIFI2_PLATFORM || SND_SOC_SOF_BAYTRAIL
|
|
|
|
if SND_SST_ATOM_HIFI2_PLATFORM
|
|
|
|
config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
|
|
tristate "Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)"
|
|
depends on I2C && ACPI
|
|
depends on X86_INTEL_LPSS || COMPILE_TEST
|
|
help
|
|
This adds support for ASoC machine driver for the MinnowBoard Max or
|
|
Up boards and provides access to I2S signals on the Low-Speed
|
|
connector. This is not a recommended option outside of these cases.
|
|
It is not intended to be enabled by distros by default.
|
|
Say Y or m if you have such a device.
|
|
|
|
If unsure select "N".
|
|
|
|
endif ## SND_SST_ATOM_HIFI2_PLATFORM
|
|
|
|
if SND_SOC_INTEL_SKL
|
|
|
|
config SND_SOC_INTEL_SKL_RT286_MACH
|
|
tristate "SKL with RT286 I2S mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
select SND_SOC_RT286
|
|
select SND_SOC_DMIC
|
|
select SND_SOC_HDAC_HDMI
|
|
help
|
|
This adds support for ASoC machine driver for Skylake platforms
|
|
with RT286 I2S audio codec.
|
|
Say Y or m if you have such a device.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
|
|
tristate "SKL with NAU88L25 and SSM4567 in I2S Mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
select SND_SOC_NAU8825
|
|
select SND_SOC_SSM4567
|
|
select SND_SOC_DMIC
|
|
select SND_SOC_HDAC_HDMI
|
|
help
|
|
This adds support for ASoC Onboard Codec I2S machine driver. This will
|
|
create an alsa sound card for NAU88L25 + SSM4567.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
|
|
tristate "SKL with NAU88L25 and MAX98357A in I2S Mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
select SND_SOC_NAU8825
|
|
select SND_SOC_MAX98357A
|
|
select SND_SOC_DMIC
|
|
select SND_SOC_HDAC_HDMI
|
|
help
|
|
This adds support for ASoC Onboard Codec I2S machine driver. This will
|
|
create an alsa sound card for NAU88L25 + MAX98357A.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
endif ## SND_SOC_INTEL_SKL
|
|
|
|
config SND_SOC_INTEL_DA7219_MAX98357A_GENERIC
|
|
tristate
|
|
select SND_SOC_DA7219
|
|
select SND_SOC_MAX98357A
|
|
select SND_SOC_MAX98390
|
|
select SND_SOC_DMIC
|
|
select SND_SOC_HDAC_HDMI
|
|
select SND_SOC_INTEL_HDA_DSP_COMMON
|
|
|
|
config SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON
|
|
tristate
|
|
select SND_SOC_INTEL_DA7219_MAX98357A_GENERIC
|
|
|
|
if SND_SOC_INTEL_APL
|
|
|
|
config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
|
|
tristate "Broxton with DA7219 and MAX98357A/MAX98390 in I2S Mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
depends on SND_HDA_CODEC_HDMI
|
|
select SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON
|
|
help
|
|
This adds support for ASoC machine driver for Broxton-P platforms
|
|
with DA7219 + MAX98357A/MAX98390 I2S audio codec.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_BXT_RT298_MACH
|
|
tristate "Broxton with RT298 I2S mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
select SND_SOC_RT298
|
|
select SND_SOC_DMIC
|
|
select SND_SOC_HDAC_HDMI
|
|
select SND_SOC_INTEL_HDA_DSP_COMMON
|
|
help
|
|
This adds support for ASoC machine driver for Broxton platforms
|
|
with RT286 I2S audio codec.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
endif ## SND_SOC_INTEL_APL
|
|
|
|
if SND_SOC_SOF_APOLLOLAKE
|
|
|
|
config SND_SOC_INTEL_SOF_WM8804_MACH
|
|
tristate "SOF with Wolfson/Cirrus WM8804 codec"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
select SND_SOC_WM8804_I2C
|
|
help
|
|
This adds support for ASoC machine driver for Intel platforms
|
|
with the Wolfson/Cirrus WM8804 I2S audio codec.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
endif ## SND_SOC_SOF_APOLLOLAKE
|
|
|
|
if SND_SOC_INTEL_KBL
|
|
|
|
config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
|
|
tristate "KBL with RT5663 and MAX98927 in I2S Mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
select SND_SOC_RT5663
|
|
select SND_SOC_MAX98927
|
|
select SND_SOC_DMIC
|
|
select SND_SOC_HDAC_HDMI
|
|
select SND_SOC_INTEL_SKYLAKE_SSP_CLK
|
|
help
|
|
This adds support for ASoC Onboard Codec I2S machine driver. This will
|
|
create an alsa sound card for RT5663 + MAX98927.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
|
|
tristate "KBL with RT5663, RT5514 and MAX98927 in I2S Mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
depends on SPI
|
|
select SND_SOC_RT5663
|
|
select SND_SOC_RT5514
|
|
select SND_SOC_RT5514_SPI
|
|
select SND_SOC_MAX98927
|
|
select SND_SOC_HDAC_HDMI
|
|
select SND_SOC_INTEL_SKYLAKE_SSP_CLK
|
|
help
|
|
This adds support for ASoC Onboard Codec I2S machine driver. This will
|
|
create an alsa sound card for RT5663 + RT5514 + MAX98927.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH
|
|
tristate "KBL with DA7219 and MAX98357A in I2S Mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
select SND_SOC_INTEL_DA7219_MAX98357A_GENERIC
|
|
help
|
|
This adds support for ASoC Onboard Codec I2S machine driver. This will
|
|
create an alsa sound card for DA7219 + MAX98357A I2S audio codec.
|
|
Say Y if you have such a device.
|
|
|
|
config SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH
|
|
tristate "KBL with DA7219 and MAX98927 in I2S Mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
select SND_SOC_DA7219
|
|
select SND_SOC_MAX98927
|
|
select SND_SOC_MAX98373_I2C
|
|
select SND_SOC_DMIC
|
|
select SND_SOC_HDAC_HDMI
|
|
help
|
|
This adds support for ASoC Onboard Codec I2S machine driver. This will
|
|
create an alsa sound card for DA7219 + MAX98927 I2S audio codec.
|
|
Say Y if you have such a device.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_KBL_RT5660_MACH
|
|
tristate "KBL with RT5660 in I2S Mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
select SND_SOC_RT5660
|
|
select SND_SOC_HDAC_HDMI
|
|
help
|
|
This adds support for ASoC Onboard Codec I2S machine driver. This will
|
|
create an alsa sound card for RT5660 I2S audio codec.
|
|
Say Y if you have such a device.
|
|
|
|
endif ## SND_SOC_INTEL_KBL
|
|
|
|
if SND_SOC_SOF_GEMINILAKE
|
|
|
|
config SND_SOC_INTEL_GLK_DA7219_MAX98357A_MACH
|
|
tristate "GLK with DA7219 and MAX98357A in I2S Mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC
|
|
select SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON
|
|
help
|
|
This adds support for ASoC machine driver for Geminilake platforms
|
|
with DA7219 + MAX98357A I2S audio codec.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH
|
|
tristate "GLK with RT5682 and MAX98357A in I2S Mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC
|
|
select SND_SOC_RT5682_I2C
|
|
select SND_SOC_RT5682S
|
|
select SND_SOC_MAX98357A
|
|
select SND_SOC_DMIC
|
|
select SND_SOC_HDAC_HDMI
|
|
select SND_SOC_INTEL_HDA_DSP_COMMON
|
|
help
|
|
This adds support for ASoC machine driver for Geminilake platforms
|
|
with RT5682 + MAX98357A I2S audio codec.
|
|
Say Y if you have such a device.
|
|
If unsure select "N".
|
|
|
|
endif ## SND_SOC_SOF_GEMINILAKE
|
|
|
|
if SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC || SND_SOC_SOF_HDA_AUDIO_CODEC
|
|
|
|
config SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH
|
|
tristate "Skylake+ with HDA Codecs"
|
|
depends on SND_HDA_CODEC_HDMI
|
|
select SND_SOC_HDAC_HDMI
|
|
select SND_SOC_INTEL_HDA_DSP_COMMON
|
|
select SND_SOC_DMIC
|
|
# SND_SOC_HDAC_HDA is already selected
|
|
help
|
|
This adds support for ASoC machine driver for Intel Skylake+
|
|
platforms with display (HDMI/DP) and HDA audio codecs, and
|
|
Smart Sound Technology (SST) integrated audio DSP.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
endif ## SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC || SND_SOC_SOF_HDA_AUDIO_CODEC
|
|
|
|
if SND_SOC_SOF_HDA_LINK || SND_SOC_SOF_BAYTRAIL
|
|
config SND_SOC_INTEL_SOF_RT5682_MACH
|
|
tristate "SOF with rt5682 codec in I2S Mode"
|
|
depends on I2C && ACPI
|
|
depends on ((SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC) &&\
|
|
(MFD_INTEL_LPSS || COMPILE_TEST)) ||\
|
|
(SND_SOC_SOF_BAYTRAIL && (X86_INTEL_LPSS || COMPILE_TEST))
|
|
select SND_SOC_MAX98373_I2C
|
|
select SND_SOC_MAX98390
|
|
select SND_SOC_RT1011
|
|
select SND_SOC_RT1015
|
|
select SND_SOC_RT1015P
|
|
select SND_SOC_RT5682_I2C
|
|
select SND_SOC_RT5682S
|
|
select SND_SOC_DMIC
|
|
select SND_SOC_HDAC_HDMI
|
|
select SND_SOC_INTEL_HDA_DSP_COMMON
|
|
select SND_SOC_INTEL_SOF_MAXIM_COMMON
|
|
select SND_SOC_INTEL_SOF_REALTEK_COMMON
|
|
help
|
|
This adds support for ASoC machine driver for SOF platforms
|
|
with rt5682 codec.
|
|
Say Y if you have such a device.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_SOF_CS42L42_MACH
|
|
tristate "SOF with cs42l42 codec in I2S Mode"
|
|
depends on I2C && ACPI
|
|
depends on ((SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC) &&\
|
|
(MFD_INTEL_LPSS || COMPILE_TEST))
|
|
select SND_SOC_CS42L42
|
|
select SND_SOC_MAX98357A
|
|
select SND_SOC_DMIC
|
|
select SND_SOC_HDAC_HDMI
|
|
select SND_SOC_INTEL_HDA_DSP_COMMON
|
|
select SND_SOC_INTEL_SOF_MAXIM_COMMON
|
|
help
|
|
This adds support for ASoC machine driver for SOF platforms
|
|
with cs42l42 codec.
|
|
Say Y if you have such a device.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_SOF_PCM512x_MACH
|
|
tristate "SOF with TI PCM512x codec"
|
|
depends on I2C && ACPI
|
|
depends on (SND_SOC_SOF_HDA_AUDIO_CODEC && (MFD_INTEL_LPSS || COMPILE_TEST)) ||\
|
|
(SND_SOC_SOF_BAYTRAIL && (X86_INTEL_LPSS || COMPILE_TEST))
|
|
depends on SND_HDA_CODEC_HDMI
|
|
select SND_SOC_INTEL_HDA_DSP_COMMON
|
|
select SND_SOC_PCM512x_I2C
|
|
help
|
|
This adds support for ASoC machine driver for SOF platforms
|
|
with TI PCM512x I2S audio codec.
|
|
Say Y or m if you have such a device.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_SOF_ES8336_MACH
|
|
tristate "SOF with ES8336 or ES8326 codec in I2S mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC
|
|
select SND_SOC_ES8316
|
|
select SND_SOC_ES8326
|
|
select SND_SOC_DMIC
|
|
select SND_SOC_INTEL_HDA_DSP_COMMON
|
|
help
|
|
This adds support for ASoC machine driver for SOF platforms
|
|
with es8336 codec.
|
|
Say Y if you have such a device.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_SOF_NAU8825_MACH
|
|
tristate "SOF with nau8825 codec in I2S Mode"
|
|
depends on I2C && ACPI
|
|
depends on ((SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC) &&\
|
|
(MFD_INTEL_LPSS || COMPILE_TEST))
|
|
select SND_SOC_NAU8825
|
|
select SND_SOC_RT1015P
|
|
select SND_SOC_MAX98373_I2C
|
|
select SND_SOC_MAX98357A
|
|
select SND_SOC_DMIC
|
|
select SND_SOC_HDAC_HDMI
|
|
select SND_SOC_INTEL_HDA_DSP_COMMON
|
|
select SND_SOC_INTEL_SOF_MAXIM_COMMON
|
|
help
|
|
This adds support for ASoC machine driver for SOF platforms
|
|
with nau8825 codec.
|
|
Say Y if you have such a device.
|
|
If unsure select "N".
|
|
|
|
endif ## SND_SOC_SOF_HDA_LINK || SND_SOC_SOF_BAYTRAIL
|
|
|
|
if (SND_SOC_SOF_COMETLAKE && SND_SOC_SOF_HDA_LINK)
|
|
|
|
config SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH
|
|
tristate "CML_LP with DA7219 and MAX98357A in I2S Mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
select SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON
|
|
help
|
|
This adds support for ASoC machine driver for Cometlake platforms
|
|
with DA7219 + MAX98357A I2S audio codec.
|
|
Say Y or m if you have such a device. This is a recommended option.
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH
|
|
tristate "CML with RT1011 and RT5682 in I2S Mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC
|
|
select SND_SOC_RT1011
|
|
select SND_SOC_RT5682_I2C
|
|
select SND_SOC_DMIC
|
|
select SND_SOC_HDAC_HDMI
|
|
select SND_SOC_INTEL_HDA_DSP_COMMON
|
|
help
|
|
This adds support for ASoC machine driver for SOF platform with
|
|
RT1011 + RT5682 I2S codec.
|
|
Say Y if you have such a device.
|
|
If unsure select "N".
|
|
|
|
endif ## SND_SOC_SOF_COMETLAKE && SND_SOC_SOF_HDA_LINK
|
|
|
|
if SND_SOC_SOF_JASPERLAKE
|
|
|
|
config SND_SOC_INTEL_SOF_DA7219_MAX98373_MACH
|
|
tristate "SOF with DA7219 and MAX98373/MAX98360A in I2S Mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC
|
|
select SND_SOC_INTEL_HDA_DSP_COMMON
|
|
select SND_SOC_DA7219
|
|
select SND_SOC_MAX98373_I2C
|
|
select SND_SOC_DMIC
|
|
help
|
|
This adds support for ASoC machine driver for SOF platforms
|
|
with DA7219 + MAX98373/MAX98360A I2S audio codec.
|
|
Say Y if you have such a device.
|
|
If unsure select "N".
|
|
|
|
endif ## SND_SOC_SOF_JASPERLAKE
|
|
|
|
if SND_SOC_SOF_HDA_LINK
|
|
|
|
config SND_SOC_INTEL_SOF_SSP_AMP_MACH
|
|
tristate "SOF with amplifiers in I2S Mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
select SND_SOC_RT1308
|
|
select SND_SOC_CS35L41_I2C
|
|
select SND_SOC_DMIC
|
|
select SND_SOC_HDAC_HDMI
|
|
select SND_SOC_INTEL_HDA_DSP_COMMON
|
|
select SND_SOC_INTEL_SOF_REALTEK_COMMON
|
|
select SND_SOC_INTEL_SOF_CIRRUS_COMMON
|
|
help
|
|
This adds support for ASoC machine driver for SOF platforms
|
|
with RT1308/CS35L41 I2S audio codec.
|
|
Say Y if you have such a device.
|
|
If unsure select "N".
|
|
endif ## SND_SOC_SOF_HDA_LINK
|
|
|
|
if SND_SOC_SOF_ELKHARTLAKE
|
|
|
|
config SND_SOC_INTEL_EHL_RT5660_MACH
|
|
tristate "EHL with RT5660 in I2S mode"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC
|
|
select SND_SOC_RT5660
|
|
select SND_SOC_DMIC
|
|
select SND_SOC_INTEL_HDA_DSP_COMMON
|
|
help
|
|
This adds support for ASoC machine driver for Elkhart Lake
|
|
platform with RT5660 I2S audio codec.
|
|
|
|
endif ## SND_SOC_SOF_ELKHARTLAKE
|
|
|
|
if SND_SOC_SOF_INTEL_SOUNDWIRE
|
|
|
|
config SND_SOC_INTEL_SOUNDWIRE_SOF_MACH
|
|
tristate "SoundWire generic machine driver"
|
|
depends on I2C && ACPI
|
|
depends on MFD_INTEL_LPSS || COMPILE_TEST
|
|
depends on SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES || COMPILE_TEST
|
|
depends on SOUNDWIRE
|
|
depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC
|
|
select SND_SOC_MAX98373_I2C
|
|
select SND_SOC_MAX98373_SDW
|
|
select SND_SOC_RT700_SDW
|
|
select SND_SOC_RT711_SDW
|
|
select SND_SOC_RT711_SDCA_SDW
|
|
select SND_SOC_RT1308_SDW
|
|
select SND_SOC_RT1308
|
|
select SND_SOC_RT1316_SDW
|
|
select SND_SOC_RT715_SDW
|
|
select SND_SOC_RT715_SDCA_SDW
|
|
select SND_SOC_RT5682_SDW
|
|
select SND_SOC_DMIC
|
|
select SND_SOC_INTEL_HDA_DSP_COMMON
|
|
select SND_SOC_INTEL_SOF_MAXIM_COMMON
|
|
imply SND_SOC_SDW_MOCKUP
|
|
help
|
|
Add support for Intel SoundWire-based platforms connected to
|
|
MAX98373, RT700, RT711, RT1308 and RT715
|
|
If unsure select "N".
|
|
|
|
endif
|
|
|
|
endif ## SND_SOC_INTEL_MACH
|