linux/drivers/pinctrl/qcom
Linus Torvalds a32b344e6f This is the bulk of pin control changes for the v5.14 kernel:
New drivers:
 
 - Last merge window we created a driver for the Ralink RT2880.
   We are now moving the Ralink SoC pin control drivers out of the MIPS
   architecture code and into the pin control subsystem. This concerns
   RT288X, MT7620, RT305X, RT3883 and MT7621.
 
 - Qualcomm SM6125 SoC pin control driver.
 
 - Qualcomm spmi-gpio support for PM7325.
 
 - Qualcomm spmi-mpp also handles PMI8994 (just a compatible string)
 
 - Mediatek MT8365 SoC pin controller.
 
 - New device HID for the AMD GPIO controller.
 
 Improvements:
 
 - Pin bias config support for a slew of Renesas pin controllers.
 
 - Incremental improvements and non-urgent bug fixes to the Renesas
   SoC drivers.
 
 - Implement irq_set_wake on the AMD pin controller so we can wake
   up from external pin events.
 
 Misc:
 
 - Devicetree bindings for the Apple M1 pin controller, we will probably
   see a proper driver for this soon as well.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmDeTu0ACgkQQRCzN7AZ
 XXO2Yg/+LHbqYX8V+Ig1ZcY4p5bfbGyyC6QG6g3d/kzzCmsjHFgmDFQoZ+LoRx+p
 FRUSvmiR0VERMZCEepHsZgzns6ezzJfBt4Cu/388d4iYZppaETpQV47TzqY3eP7Q
 4Shu2wIKwd7C3vNrCifub0JOYAAEsqdlHd75g0bqhal9hgH/MgYQSq9F22/TKAFl
 hteFwyw5L4OwKIDUpqDOIcG8thhHYWrQy77/Pp82/TVnmO9gamt863dKBjIg6iF9
 c+pmIWI8K2mBhNO+epGG4VSroUudIBwKV88nwUjKSe+pu0VAU7lit/V0Uh1IhG0s
 FUHHGDeF62Ncn4SOYetlnSlKbQkhJaBDV2sDgQ3xzqvs1P3WEHRWqYIh1egq5iW6
 /KtpSlRLQ/aO+k0iN66pErpAfsGNFAxkqlCSypyJG7ROnb2rADzZ0ftEKQb8RzZb
 nypPupOO5/bFfQHbQtFORDaNu9MUTR5PR04eTPMoApG0nv7zY+kcJ6iJuKE9spLb
 ahoxLstfQ/fKK27yms72E6PqwanuUEzcQv7gjhuHmFEjNrW1ARUqoa5hpdAzhZOX
 20P8SZWkSeUZnqB26YQq+1U9p6wV0064Vp+jYY/wzQpV40dgX9oumiRkxCWCzpjt
 6mw6x9txlrEEu+2WadW8yZd4ewKvWFLEGI+C/83pnI5NF1Dp0Go=
 =Ajcr
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.14 kernel. Not so
  much going on. No core changes, just drivers.

  The most interesting would be that MIPS Ralink is migrating to pin
  control and we have some bindings but not yet code for the Apple M1
  pin controller.

  New drivers:

   - Last merge window we created a driver for the Ralink RT2880. We are
     now moving the Ralink SoC pin control drivers out of the MIPS
     architecture code and into the pin control subsystem. This concerns
     RT288X, MT7620, RT305X, RT3883 and MT7621.

   - Qualcomm SM6125 SoC pin control driver.

   - Qualcomm spmi-gpio support for PM7325.

   - Qualcomm spmi-mpp also handles PMI8994 (just a compatible string)

   - Mediatek MT8365 SoC pin controller.

   - New device HID for the AMD GPIO controller.

  Improvements:

   - Pin bias config support for a slew of Renesas pin controllers.

   - Incremental improvements and non-urgent bug fixes to the Renesas
     SoC drivers.

   - Implement irq_set_wake on the AMD pin controller so we can wake up
     from external pin events.

  Misc:

   - Devicetree bindings for the Apple M1 pin controller, we will
     probably see a proper driver for this soon as well"

* tag 'pinctrl-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (54 commits)
  pinctrl: ralink: rt305x: add missing include
  pinctrl: stm32: check for IRQ MUX validity during alloc()
  pinctrl: zynqmp: some code cleanups
  drivers: qcom: pinctrl: Add pinctrl driver for sm6125
  dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver
  dt-bindings: pinctrl: mcp23s08: add documentation for reset-gpios
  pinctrl: mcp23s08: Add optional reset GPIO
  pinctrl: mediatek: fix mode encoding
  pinctrl: mcp23s08: Fix missing unlock on error in mcp23s08_irq()
  pinctrl: bcm: Constify static pinmux_ops
  pinctrl: bcm: Constify static pinctrl_ops
  pinctrl: ralink: move RT288X SoC pinmux config into a new 'pinctrl-rt288x.c' file
  pinctrl: ralink: move MT7620 SoC pinmux config into a new 'pinctrl-mt7620.c' file
  pinctrl: ralink: move RT305X SoC pinmux config into a new 'pinctrl-rt305x.c' file
  pinctrl: ralink: move RT3883 SoC pinmux config into a new 'pinctrl-rt3883.c' file
  pinctrl: ralink: move MT7621 SoC pinmux config into a new 'pinctrl-mt7621.c' file
  pinctrl: ralink: move ralink architecture pinmux header into the driver
  pinctrl: single: config: enable the pin's input
  pinctrl: mtk: Fix mt8365 Kconfig dependency
  pinctrl: mcp23s08: fix race condition in irq handler
  ...
2021-07-01 16:57:14 -07:00
..
Kconfig This is the bulk of pin control changes for the v5.14 kernel: 2021-07-01 16:57:14 -07:00
Makefile drivers: qcom: pinctrl: Add pinctrl driver for sm6125 2021-06-18 11:21:45 +02:00
pinctrl-apq8064.c
pinctrl-apq8084.c
pinctrl-ipq4019.c pinctrl: qcom: ipq4019: add open drain support 2020-07-16 10:46:24 +02:00
pinctrl-ipq6018.c pinctrl: qcom: ipq6018 Add missing pins in qpic pin group 2020-06-20 22:05:24 +02:00
pinctrl-ipq8064.c ipq8064: pinctrl: Fixed missing RGMII pincontrol definitions 2020-02-21 16:23:26 +01:00
pinctrl-ipq8074.c pinctrl: qcom: ipq8074: route gpio interrupts to APPS 2020-07-11 23:11:00 +02:00
pinctrl-lpass-lpi.c pinctrl: qcom: lpass lpi: use default pullup/strength values 2021-03-11 00:13:07 +01:00
pinctrl-mdm9615.c
pinctrl-msm8x74.c
pinctrl-msm8226.c pinctrl: qcom: Add msm8226 pinctrl driver. 2020-08-27 10:27:14 +02:00
pinctrl-msm8660.c
pinctrl-msm8916.c
pinctrl-msm8953.c pinctrl: qcom: add pinctrl driver for msm8953 2020-11-10 14:58:14 +01:00
pinctrl-msm8960.c
pinctrl-msm8976.c pinctrl: qcom: pinctrl-msm8976: Remove unused variable 'nav_tsync_groups' 2020-07-16 15:12:38 +02:00
pinctrl-msm8994.c
pinctrl-msm8996.c
pinctrl-msm8998.c pinctrl: msm8998: Squash TSIF pins together 2019-07-29 23:28:57 +02:00
pinctrl-msm.c pinctrl: qcom: Don't clear pending interrupts when enabling 2021-01-18 16:07:08 +01:00
pinctrl-msm.h pinctrl: qcom: Allow SoCs to specify a GPIO function that's not 0 2021-01-18 16:07:08 +01:00
pinctrl-qcs404.c
pinctrl-qdf2xxx.c pinctrl: qdf2xxx: Switch to use device_property_count_uXX() 2019-08-05 12:01:45 +02:00
pinctrl-sc7180.c pinctrl: qcom: Handle broken/missing PDC dual edge IRQs on sc7180 2020-07-16 15:41:41 +02:00
pinctrl-sc7280.c This is the bulk of the pin control changes for the v5.13 kernel cycle 2021-04-30 13:04:30 -07:00
pinctrl-sc8180x.c pinctrl: qcom: sc8180x: add ACPI probe support 2021-03-15 17:30:29 +01:00
pinctrl-sdm660.c
pinctrl-sdm845.c pinctrl: remove empty lines in pinctrl subsystem 2021-01-05 16:09:24 +01:00
pinctrl-sdx55.c pinctrl: qcom: Fix duplication in gpio_groups 2021-06-07 00:18:55 +02:00
pinctrl-sm6125.c drivers: qcom: pinctrl: Add pinctrl driver for sm6125 2021-06-18 11:21:45 +02:00
pinctrl-sm8150.c pinctrl: qcom: Add SM8150 pinctrl driver 2019-07-04 09:47:13 +02:00
pinctrl-sm8250.c pinctrl: qcom: sm8250: Specify PDC map 2020-11-10 14:57:05 +01:00
pinctrl-sm8350.c pinctrl: qcom: sm8350: add GPIO wakeup interrupt map 2021-03-15 17:14:42 +01:00
pinctrl-spmi-gpio.c pinctrl: qcom: spmi-gpio: Add support for pm7325 2021-05-20 01:42:05 +02:00
pinctrl-spmi-mpp.c pinctrl: qcom: spmi-mpp: Add compatible for pmi8994 2021-05-19 02:23:52 +02:00
pinctrl-ssbi-gpio.c pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword 2020-07-20 15:38:27 +02:00
pinctrl-ssbi-mpp.c pinctrl: remove empty lines in pinctrl subsystem 2021-01-05 16:09:24 +01:00