0b56e9a7e8
Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Also updated the MAINTAINERS file to reflect the correct directory structure for phy drivers. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
236 lines
11 KiB
C
236 lines
11 KiB
C
/*
|
|
* Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#ifndef UFS_QCOM_PHY_QMP_20NM_H_
|
|
#define UFS_QCOM_PHY_QMP_20NM_H_
|
|
|
|
#include "phy-qcom-ufs-i.h"
|
|
|
|
/* QCOM UFS PHY control registers */
|
|
|
|
#define COM_OFF(x) (0x000 + x)
|
|
#define PHY_OFF(x) (0xC00 + x)
|
|
#define TX_OFF(n, x) (0x400 + (0x400 * n) + x)
|
|
#define RX_OFF(n, x) (0x600 + (0x400 * n) + x)
|
|
|
|
/* UFS PHY PLL block registers */
|
|
#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x0)
|
|
#define QSERDES_COM_PLL_VCOTAIL_EN COM_OFF(0x04)
|
|
#define QSERDES_COM_PLL_CNTRL COM_OFF(0x14)
|
|
#define QSERDES_COM_PLL_IP_SETI COM_OFF(0x24)
|
|
#define QSERDES_COM_CORE_CLK_IN_SYNC_SEL COM_OFF(0x28)
|
|
#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x30)
|
|
#define QSERDES_COM_PLL_CP_SETI COM_OFF(0x34)
|
|
#define QSERDES_COM_PLL_IP_SETP COM_OFF(0x38)
|
|
#define QSERDES_COM_PLL_CP_SETP COM_OFF(0x3C)
|
|
#define QSERDES_COM_SYSCLK_EN_SEL_TXBAND COM_OFF(0x48)
|
|
#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0x4C)
|
|
#define QSERDES_COM_RESETSM_CNTRL2 COM_OFF(0x50)
|
|
#define QSERDES_COM_PLLLOCK_CMP1 COM_OFF(0x90)
|
|
#define QSERDES_COM_PLLLOCK_CMP2 COM_OFF(0x94)
|
|
#define QSERDES_COM_PLLLOCK_CMP3 COM_OFF(0x98)
|
|
#define QSERDES_COM_PLLLOCK_CMP_EN COM_OFF(0x9C)
|
|
#define QSERDES_COM_BGTC COM_OFF(0xA0)
|
|
#define QSERDES_COM_DEC_START1 COM_OFF(0xAC)
|
|
#define QSERDES_COM_PLL_AMP_OS COM_OFF(0xB0)
|
|
#define QSERDES_COM_RES_CODE_UP_OFFSET COM_OFF(0xD8)
|
|
#define QSERDES_COM_RES_CODE_DN_OFFSET COM_OFF(0xDC)
|
|
#define QSERDES_COM_DIV_FRAC_START1 COM_OFF(0x100)
|
|
#define QSERDES_COM_DIV_FRAC_START2 COM_OFF(0x104)
|
|
#define QSERDES_COM_DIV_FRAC_START3 COM_OFF(0x108)
|
|
#define QSERDES_COM_DEC_START2 COM_OFF(0x10C)
|
|
#define QSERDES_COM_PLL_RXTXEPCLK_EN COM_OFF(0x110)
|
|
#define QSERDES_COM_PLL_CRCTRL COM_OFF(0x114)
|
|
#define QSERDES_COM_PLL_CLKEPDIV COM_OFF(0x118)
|
|
|
|
/* TX LANE n (0, 1) registers */
|
|
#define QSERDES_TX_EMP_POST1_LVL(n) TX_OFF(n, 0x08)
|
|
#define QSERDES_TX_DRV_LVL(n) TX_OFF(n, 0x0C)
|
|
#define QSERDES_TX_LANE_MODE(n) TX_OFF(n, 0x54)
|
|
|
|
/* RX LANE n (0, 1) registers */
|
|
#define QSERDES_RX_CDR_CONTROL1(n) RX_OFF(n, 0x0)
|
|
#define QSERDES_RX_CDR_CONTROL_HALF(n) RX_OFF(n, 0x8)
|
|
#define QSERDES_RX_RX_EQ_GAIN1_LSB(n) RX_OFF(n, 0xA8)
|
|
#define QSERDES_RX_RX_EQ_GAIN1_MSB(n) RX_OFF(n, 0xAC)
|
|
#define QSERDES_RX_RX_EQ_GAIN2_LSB(n) RX_OFF(n, 0xB0)
|
|
#define QSERDES_RX_RX_EQ_GAIN2_MSB(n) RX_OFF(n, 0xB4)
|
|
#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(n) RX_OFF(n, 0xBC)
|
|
#define QSERDES_RX_CDR_CONTROL_QUARTER(n) RX_OFF(n, 0xC)
|
|
#define QSERDES_RX_SIGDET_CNTRL(n) RX_OFF(n, 0x100)
|
|
|
|
/* UFS PHY registers */
|
|
#define UFS_PHY_PHY_START PHY_OFF(0x00)
|
|
#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x4)
|
|
#define UFS_PHY_TX_LANE_ENABLE PHY_OFF(0x44)
|
|
#define UFS_PHY_PWM_G1_CLK_DIVIDER PHY_OFF(0x08)
|
|
#define UFS_PHY_PWM_G2_CLK_DIVIDER PHY_OFF(0x0C)
|
|
#define UFS_PHY_PWM_G3_CLK_DIVIDER PHY_OFF(0x10)
|
|
#define UFS_PHY_PWM_G4_CLK_DIVIDER PHY_OFF(0x14)
|
|
#define UFS_PHY_CORECLK_PWM_G1_CLK_DIVIDER PHY_OFF(0x34)
|
|
#define UFS_PHY_CORECLK_PWM_G2_CLK_DIVIDER PHY_OFF(0x38)
|
|
#define UFS_PHY_CORECLK_PWM_G3_CLK_DIVIDER PHY_OFF(0x3C)
|
|
#define UFS_PHY_CORECLK_PWM_G4_CLK_DIVIDER PHY_OFF(0x40)
|
|
#define UFS_PHY_OMC_STATUS_RDVAL PHY_OFF(0x68)
|
|
#define UFS_PHY_LINE_RESET_TIME PHY_OFF(0x28)
|
|
#define UFS_PHY_LINE_RESET_GRANULARITY PHY_OFF(0x2C)
|
|
#define UFS_PHY_TSYNC_RSYNC_CNTL PHY_OFF(0x48)
|
|
#define UFS_PHY_PLL_CNTL PHY_OFF(0x50)
|
|
#define UFS_PHY_TX_LARGE_AMP_DRV_LVL PHY_OFF(0x54)
|
|
#define UFS_PHY_TX_SMALL_AMP_DRV_LVL PHY_OFF(0x5C)
|
|
#define UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL PHY_OFF(0x58)
|
|
#define UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL PHY_OFF(0x60)
|
|
#define UFS_PHY_CFG_CHANGE_CNT_VAL PHY_OFF(0x64)
|
|
#define UFS_PHY_RX_SYNC_WAIT_TIME PHY_OFF(0x6C)
|
|
#define UFS_PHY_TX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB4)
|
|
#define UFS_PHY_RX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE0)
|
|
#define UFS_PHY_TX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB8)
|
|
#define UFS_PHY_RX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE4)
|
|
#define UFS_PHY_TX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xBC)
|
|
#define UFS_PHY_RX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xE8)
|
|
#define UFS_PHY_RX_PWM_BURST_CLOSURE_LENGTH_CAPABILITY PHY_OFF(0xFC)
|
|
#define UFS_PHY_RX_MIN_ACTIVATETIME_CAPABILITY PHY_OFF(0x100)
|
|
#define UFS_PHY_RX_SIGDET_CTRL3 PHY_OFF(0x14c)
|
|
#define UFS_PHY_RMMI_ATTR_CTRL PHY_OFF(0x160)
|
|
#define UFS_PHY_RMMI_RX_CFGUPDT_L1 (1 << 7)
|
|
#define UFS_PHY_RMMI_TX_CFGUPDT_L1 (1 << 6)
|
|
#define UFS_PHY_RMMI_CFGWR_L1 (1 << 5)
|
|
#define UFS_PHY_RMMI_CFGRD_L1 (1 << 4)
|
|
#define UFS_PHY_RMMI_RX_CFGUPDT_L0 (1 << 3)
|
|
#define UFS_PHY_RMMI_TX_CFGUPDT_L0 (1 << 2)
|
|
#define UFS_PHY_RMMI_CFGWR_L0 (1 << 1)
|
|
#define UFS_PHY_RMMI_CFGRD_L0 (1 << 0)
|
|
#define UFS_PHY_RMMI_ATTRID PHY_OFF(0x164)
|
|
#define UFS_PHY_RMMI_ATTRWRVAL PHY_OFF(0x168)
|
|
#define UFS_PHY_RMMI_ATTRRDVAL_L0_STATUS PHY_OFF(0x16C)
|
|
#define UFS_PHY_RMMI_ATTRRDVAL_L1_STATUS PHY_OFF(0x170)
|
|
#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x174)
|
|
|
|
#define UFS_PHY_TX_LANE_ENABLE_MASK 0x3
|
|
|
|
/*
|
|
* This structure represents the 20nm specific phy.
|
|
* common_cfg MUST remain the first field in this structure
|
|
* in case extra fields are added. This way, when calling
|
|
* get_ufs_qcom_phy() of generic phy, we can extract the
|
|
* common phy structure (struct ufs_qcom_phy) out of it
|
|
* regardless of the relevant specific phy.
|
|
*/
|
|
struct ufs_qcom_phy_qmp_20nm {
|
|
struct ufs_qcom_phy common_cfg;
|
|
};
|
|
|
|
static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_2_0[] = {
|
|
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
|
|
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x3f),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x1b),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x0f),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(0), 0x2F),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(0), 0x20),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(1), 0x2F),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(1), 0x20),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3),
|
|
};
|
|
|
|
static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_3_0[] = {
|
|
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
|
|
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x2b),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x38),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x3c),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_UP_OFFSET, 0x02),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_DN_OFFSET, 0x02),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CNTRL, 0x40),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3),
|
|
};
|
|
|
|
static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x98),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0x65),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x1e),
|
|
};
|
|
|
|
#endif
|