iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm64/boot/dts/qcom/sdm845.dtsi
Linus Torvalds ae45d84fc3 ARM: SoC DT updates for v5.16 
This is a rather large update for the ARM devicetree files, after a few
 quieter releases, with 775 total commits and 47 branches pulled into
 this one. There are 5 new SoC types plus some minor variations, and
 a total of 60 new machines, so I'm limiting the summary to the main
 noteworthy items:
 
  - Apple M1 gain support for PCI and pinctrl, getting a bit
    closer to a usable system out of the box.
 
  - Qualcomm gains support for Snapdragon 690 (aka SM6350) as
    well as SM7225, 11 new smartphones, and three additional
    Chromebooks, and improvements all over the place.
 
  - Samsung gains support for ExynosAutov9, an automotive version
    of their smartphone SoC, but otherwise no major changes.
 
  - Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a
    number of improvements for the recently added SAMA7 family.
    The LAN966 SoC that was added in the platform code does not
    have dts files yet. Two board files are added for the older
    at91sam9g20 SoC
 
  - Aspeed supports two additional server boards using their AST2600
    as BMC, and improves support for qemu models
 
  - Rockchip RK3566/RK3688 gets added, along with six new
    development boards using RK3328/RK3399/RK3566, and one
    Chromebook tablet.
 
  - Two NAS boxes are added using the ARMv4 based Gemini platform
 
  - One new board is added to the Intel Arria SoC FPGA family
 
  - Marvell adds one network switch based on Armada 381 and the
    new MOCHAbin 7040 development board
 
  - NXP adds support for the S32G2 automotive SoC, two imx6 based
    ebook readers, and three additional development boards, which
    is notably less than their usual additions, but they also gain
    improvements to their many existing boards
 
  - STmicroelectronics adds their stm32mp13 SoC family along with
    a reference board
 
  - Renesas adds new versions of their R-Car Gen3 SoCs and many
    updates for their older generations
 
  - Broadcom adds support for a number of Cisco Meraki wireless
    controllers, along with two new boards and other updates for
    BCM53xx/BCM47xx networking SoCs and the Raspberry Pi
    boards
 
  - Mediatek improves support for the MT81xx SoCs used in Chromebooks
    as well as the MT76xx networking SoCs
 
  - NVIDIA adds a number of cleanups and additional support for
    more hardware on the already supported machines
 
  - TI K3 adds support for three new boards along with cleanups
 
  - Toshiba adds one board for the Visconti family
 
  - Xilinx adds five new ZynqMP based machines
 
  - Amlogic support is added for the Radxa Zero and two Jethub
    home automation controllers, along with changes to other
    machines
 
  - Rob Herring continues his work on fixing dtc warnings all over
    the tree.
 
  - Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
    Ux500, Unisoc
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmGDCJYACgkQmmx57+YA
 GNlIlQ//VOQJeP7Om3Qt3Vai/zvrSWegAagI8quF6m4fTI0D3NVRw4KD7sld1+39
 lIcUTdM4eSXO+vsyWRSb9ESyymGGsTy9o8irIDTH2SSyawMwFwydgoO/riS6/tkG
 37c9OvCNdjhQIgxo20vW8+dr021UNJqQNG7dQzTJrlbe8IzNGkSjVO5i97v8XK2e
 HWtwhOd8W7ptmuTKdq5/DTv0V9LzcJSfWlwYPscHRGHg/t0+frC+G2H3osjgGuux
 gbbrdocy1Qmj1sqeAPBud5O2TTEu4M09HYgVWXoKcgBzTt3hJZ9TmzE4YNfUYmv6
 sYz+BaPesm2hR+zjBz0wxGG+eP27Zv4FUN/VeMGilRbhXVCv6GSf90fDTbaW4Q8F
 IR/BgN0lk2GyNjRyVUcDQI/Aus//TXAI7+rcfXccGBrxs/EBZ3e/hmNNTi9jCMBT
 NGLkXAI574tcfLUYybj87upFTPLHTwq4is9p1RY/l73wlcFDZHai+aE2X5GhYLzy
 XaYuyur1wA+v5938RjjwCYJjqssz+OlJJP1N2KeQT99PVkS0IunXFJGcsve6UOAN
 maRxI4oSU1lz6VaP8tsVJESzObwFCtOdYjgUHpRUJ8JTNTRpy/6JLAX0dnr1LrQV
 Fr6gLtodCOa2Udc5T+VkoodAw2f5Gta8cE1fQB9CjUDklkhUtsg=
 =jp4P
 -----END PGP SIGNATURE-----

Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC DT updates from Arnd Bergmann:
 "This is a rather large update for the ARM devicetree files, after a
  few quieter releases, with 775 total commits and 47 branches pulled
  into this one.

  There are 5 new SoC types plus some minor variations, and a total of
  60 new machines, so I'm limiting the summary to the main noteworthy
  items:

   - Apple M1 gain support for PCI and pinctrl, getting a bit closer to
     a usable system out of the box.

   - Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as
     SM7225, 11 new smartphones, and three additional Chromebooks, and
     improvements all over the place.

   - Samsung gains support for ExynosAutov9, an automotive version of
     their smartphone SoC, but otherwise no major changes.

   - Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number
     of improvements for the recently added SAMA7 family. The LAN966 SoC
     that was added in the platform code does not have dts files yet.
     Two board files are added for the older at91sam9g20 SoC

   - Aspeed supports two additional server boards using their AST2600 as
     BMC, and improves support for qemu models

   - Rockchip RK3566/RK3688 gets added, along with six new development
     boards using RK3328/RK3399/RK3566, and one Chromebook tablet.

   - Two NAS boxes are added using the ARMv4 based Gemini platform

   - One new board is added to the Intel Arria SoC FPGA family

   - Marvell adds one network switch based on Armada 381 and the new
     MOCHAbin 7040 development board

   - NXP adds support for the S32G2 automotive SoC, two imx6 based ebook
     readers, and three additional development boards, which is notably
     less than their usual additions, but they also gain improvements to
     their many existing boards

   - STmicroelectronics adds their stm32mp13 SoC family along with a
     reference board

   - Renesas adds new versions of their R-Car Gen3 SoCs and many updates
     for their older generations

   - Broadcom adds support for a number of Cisco Meraki wireless
     controllers, along with two new boards and other updates for
     BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards

   - Mediatek improves support for the MT81xx SoCs used in Chromebooks
     as well as the MT76xx networking SoCs

   - NVIDIA adds a number of cleanups and additional support for more
     hardware on the already supported machines

   - TI K3 adds support for three new boards along with cleanups

   - Toshiba adds one board for the Visconti family

   - Xilinx adds five new ZynqMP based machines

   - Amlogic support is added for the Radxa Zero and two Jethub home
     automation controllers, along with changes to other machines

   - Rob Herring continues his work on fixing dtc warnings all over the
     tree.

   - Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
     Ux500, Unisoc"

* tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits)
  arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address
  arm64: dts: apple: t8103: Add root port interrupt routing
  arm64: dts: apple: t8103: Add PCIe DARTs
  arm64: apple: Add PCIe node
  arm64: apple: Add pinctrl nodes
  ARM: dts: arm: Update ICST clock nodes 'reg' and node names
  ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
  arm64: dts: exynos: add chipid node for exynosautov9 SoC
  ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
  Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
  arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
  arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
  arm64: dts: qcom: sm8350: Add CPU topology and idle-states
  arm64: dts: qcom: Drop unneeded extra device-specific includes
  arm64: dts: qcom: msm8916: Drop standalone smem node
  arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
  arm64: dts: qcom: msm8916-asus-z00l: Add sensors
  arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
  arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
  arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
  ...
2021-11-03 16:56:03 -07:00

5413 lines
132 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* SDM845 SoC device tree source
*
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
*/
#include <dt-bindings/clock/qcom,camcc-sdm845.h>
#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
#include <dt-bindings/clock/qcom,lpass-sdm845.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,videocc-sdm845.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sdm845.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy-qcom-qusb2.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
i2c7 = &i2c7;
i2c8 = &i2c8;
i2c9 = &i2c9;
i2c10 = &i2c10;
i2c11 = &i2c11;
i2c12 = &i2c12;
i2c13 = &i2c13;
i2c14 = &i2c14;
i2c15 = &i2c15;
spi0 = &spi0;
spi1 = &spi1;
spi2 = &spi2;
spi3 = &spi3;
spi4 = &spi4;
spi5 = &spi5;
spi6 = &spi6;
spi7 = &spi7;
spi8 = &spi8;
spi9 = &spi9;
spi10 = &spi10;
spi11 = &spi11;
spi12 = &spi12;
spi13 = &spi13;
spi14 = &spi14;
spi15 = &spi15;
};
chosen { };
memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
reg = <0 0x80000000 0 0>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
hyp_mem: memory@85700000 {
reg = <0 0x85700000 0 0x600000>;
no-map;
};
xbl_mem: memory@85e00000 {
reg = <0 0x85e00000 0 0x100000>;
no-map;
};
aop_mem: memory@85fc0000 {
reg = <0 0x85fc0000 0 0x20000>;
no-map;
};
aop_cmd_db_mem: memory@85fe0000 {
compatible = "qcom,cmd-db";
reg = <0x0 0x85fe0000 0 0x20000>;
no-map;
};
smem@86000000 {
compatible = "qcom,smem";
reg = <0x0 0x86000000 0 0x200000>;
no-map;
hwlocks = <&tcsr_mutex 3>;
};
tz_mem: memory@86200000 {
reg = <0 0x86200000 0 0x2d00000>;
no-map;
};
rmtfs_mem: memory@88f00000 {
compatible = "qcom,rmtfs-mem";
reg = <0 0x88f00000 0 0x200000>;
no-map;
qcom,client-id = <1>;
qcom,vmid = <15>;
};
qseecom_mem: memory@8ab00000 {
reg = <0 0x8ab00000 0 0x1400000>;
no-map;
};
camera_mem: memory@8bf00000 {
reg = <0 0x8bf00000 0 0x500000>;
no-map;
};
ipa_fw_mem: memory@8c400000 {
reg = <0 0x8c400000 0 0x10000>;
no-map;
};
ipa_gsi_mem: memory@8c410000 {
reg = <0 0x8c410000 0 0x5000>;
no-map;
};
gpu_mem: memory@8c415000 {
reg = <0 0x8c415000 0 0x2000>;
no-map;
};
adsp_mem: memory@8c500000 {
reg = <0 0x8c500000 0 0x1a00000>;
no-map;
};
wlan_msa_mem: memory@8df00000 {
reg = <0 0x8df00000 0 0x100000>;
no-map;
};
mpss_region: memory@8e000000 {
reg = <0 0x8e000000 0 0x7800000>;
no-map;
};
venus_mem: memory@95800000 {
reg = <0 0x95800000 0 0x500000>;
no-map;
};
cdsp_mem: memory@95d00000 {
reg = <0 0x95d00000 0 0x800000>;
no-map;
};
mba_region: memory@96500000 {
reg = <0 0x96500000 0 0x200000>;
no-map;
};
slpi_mem: memory@96700000 {
reg = <0 0x96700000 0 0x1400000>;
no-map;
};
spss_mem: memory@97b00000 {
reg = <0 0x97b00000 0 0x100000>;
no-map;
};
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "qcom,kryo385";
reg = <0x0 0x0>;
enable-method = "psci";
cpu-idle-states = <&LITTLE_CPU_SLEEP_0
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <607>;
dynamic-power-coefficient = <100>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
L3_0: l3-cache {
compatible = "cache";
};
};
};
CPU1: cpu@100 {
device_type = "cpu";
compatible = "qcom,kryo385";
reg = <0x0 0x100>;
enable-method = "psci";
cpu-idle-states = <&LITTLE_CPU_SLEEP_0
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <607>;
dynamic-power-coefficient = <100>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_100>;
L2_100: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
};
};
CPU2: cpu@200 {
device_type = "cpu";
compatible = "qcom,kryo385";
reg = <0x0 0x200>;
enable-method = "psci";
cpu-idle-states = <&LITTLE_CPU_SLEEP_0
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <607>;
dynamic-power-coefficient = <100>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_200>;
L2_200: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
};
};
CPU3: cpu@300 {
device_type = "cpu";
compatible = "qcom,kryo385";
reg = <0x0 0x300>;
enable-method = "psci";
cpu-idle-states = <&LITTLE_CPU_SLEEP_0
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <607>;
dynamic-power-coefficient = <100>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_300>;
L2_300: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
};
};
CPU4: cpu@400 {
device_type = "cpu";
compatible = "qcom,kryo385";
reg = <0x0 0x400>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&BIG_CPU_SLEEP_0
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
dynamic-power-coefficient = <396>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_400>;
L2_400: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
};
};
CPU5: cpu@500 {
device_type = "cpu";
compatible = "qcom,kryo385";
reg = <0x0 0x500>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&BIG_CPU_SLEEP_0
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
dynamic-power-coefficient = <396>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_500>;
L2_500: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
};
};
CPU6: cpu@600 {
device_type = "cpu";
compatible = "qcom,kryo385";
reg = <0x0 0x600>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&BIG_CPU_SLEEP_0
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
dynamic-power-coefficient = <396>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_600>;
L2_600: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
};
};
CPU7: cpu@700 {
device_type = "cpu";
compatible = "qcom,kryo385";
reg = <0x0 0x700>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&BIG_CPU_SLEEP_0
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
dynamic-power-coefficient = <396>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
next-level-cache = <&L2_700>;
L2_700: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
};
};
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
core2 {
cpu = <&CPU2>;
};
core3 {
cpu = <&CPU3>;
};
core4 {
cpu = <&CPU4>;
};
core5 {
cpu = <&CPU5>;
};
core6 {
cpu = <&CPU6>;
};
core7 {
cpu = <&CPU7>;
};
};
};
idle-states {
entry-method = "psci";
LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
compatible = "arm,idle-state";
idle-state-name = "little-power-down";
arm,psci-suspend-param = <0x40000003>;
entry-latency-us = <350>;
exit-latency-us = <461>;
min-residency-us = <1890>;
local-timer-stop;
};
LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
compatible = "arm,idle-state";
idle-state-name = "little-rail-power-down";
arm,psci-suspend-param = <0x40000004>;
entry-latency-us = <360>;
exit-latency-us = <531>;
min-residency-us = <3934>;
local-timer-stop;
};
BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
compatible = "arm,idle-state";
idle-state-name = "big-power-down";
arm,psci-suspend-param = <0x40000003>;
entry-latency-us = <264>;
exit-latency-us = <621>;
min-residency-us = <952>;
local-timer-stop;
};
BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
compatible = "arm,idle-state";
idle-state-name = "big-rail-power-down";
arm,psci-suspend-param = <0x40000004>;
entry-latency-us = <702>;
exit-latency-us = <1061>;
min-residency-us = <4488>;
local-timer-stop;
};
CLUSTER_SLEEP_0: cluster-sleep-0 {
compatible = "arm,idle-state";
idle-state-name = "cluster-power-down";
arm,psci-suspend-param = <0x400000F4>;
entry-latency-us = <3263>;
exit-latency-us = <6562>;
min-residency-us = <9987>;
local-timer-stop;
};
};
};
cpu0_opp_table: cpu0_opp_table {
compatible = "operating-points-v2";
opp-shared;
cpu0_opp1: opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-peak-kBps = <800000 4800000>;
};
cpu0_opp2: opp-403200000 {
opp-hz = /bits/ 64 <403200000>;
opp-peak-kBps = <800000 4800000>;
};
cpu0_opp3: opp-480000000 {
opp-hz = /bits/ 64 <480000000>;
opp-peak-kBps = <800000 6451200>;
};
cpu0_opp4: opp-576000000 {
opp-hz = /bits/ 64 <576000000>;
opp-peak-kBps = <800000 6451200>;
};
cpu0_opp5: opp-652800000 {
opp-hz = /bits/ 64 <652800000>;
opp-peak-kBps = <800000 7680000>;
};
cpu0_opp6: opp-748800000 {
opp-hz = /bits/ 64 <748800000>;
opp-peak-kBps = <1804000 9216000>;
};
cpu0_opp7: opp-825600000 {
opp-hz = /bits/ 64 <825600000>;
opp-peak-kBps = <1804000 9216000>;
};
cpu0_opp8: opp-902400000 {
opp-hz = /bits/ 64 <902400000>;
opp-peak-kBps = <1804000 10444800>;
};
cpu0_opp9: opp-979200000 {
opp-hz = /bits/ 64 <979200000>;
opp-peak-kBps = <1804000 11980800>;
};
cpu0_opp10: opp-1056000000 {
opp-hz = /bits/ 64 <1056000000>;
opp-peak-kBps = <1804000 11980800>;
};
cpu0_opp11: opp-1132800000 {
opp-hz = /bits/ 64 <1132800000>;
opp-peak-kBps = <2188000 13516800>;
};
cpu0_opp12: opp-1228800000 {
opp-hz = /bits/ 64 <1228800000>;
opp-peak-kBps = <2188000 15052800>;
};
cpu0_opp13: opp-1324800000 {
opp-hz = /bits/ 64 <1324800000>;
opp-peak-kBps = <2188000 16588800>;
};
cpu0_opp14: opp-1420800000 {
opp-hz = /bits/ 64 <1420800000>;
opp-peak-kBps = <3072000 18124800>;
};
cpu0_opp15: opp-1516800000 {
opp-hz = /bits/ 64 <1516800000>;
opp-peak-kBps = <3072000 19353600>;
};
cpu0_opp16: opp-1612800000 {
opp-hz = /bits/ 64 <1612800000>;
opp-peak-kBps = <4068000 19353600>;
};
cpu0_opp17: opp-1689600000 {
opp-hz = /bits/ 64 <1689600000>;
opp-peak-kBps = <4068000 20889600>;
};
cpu0_opp18: opp-1766400000 {
opp-hz = /bits/ 64 <1766400000>;
opp-peak-kBps = <4068000 22425600>;
};
};
cpu4_opp_table: cpu4_opp_table {
compatible = "operating-points-v2";
opp-shared;
cpu4_opp1: opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-peak-kBps = <800000 4800000>;
};
cpu4_opp2: opp-403200000 {
opp-hz = /bits/ 64 <403200000>;
opp-peak-kBps = <800000 4800000>;
};
cpu4_opp3: opp-480000000 {
opp-hz = /bits/ 64 <480000000>;
opp-peak-kBps = <1804000 4800000>;
};
cpu4_opp4: opp-576000000 {
opp-hz = /bits/ 64 <576000000>;
opp-peak-kBps = <1804000 4800000>;
};
cpu4_opp5: opp-652800000 {
opp-hz = /bits/ 64 <652800000>;
opp-peak-kBps = <1804000 4800000>;
};
cpu4_opp6: opp-748800000 {
opp-hz = /bits/ 64 <748800000>;
opp-peak-kBps = <1804000 4800000>;
};
cpu4_opp7: opp-825600000 {
opp-hz = /bits/ 64 <825600000>;
opp-peak-kBps = <2188000 9216000>;
};
cpu4_opp8: opp-902400000 {
opp-hz = /bits/ 64 <902400000>;
opp-peak-kBps = <2188000 9216000>;
};
cpu4_opp9: opp-979200000 {
opp-hz = /bits/ 64 <979200000>;
opp-peak-kBps = <2188000 9216000>;
};
cpu4_opp10: opp-1056000000 {
opp-hz = /bits/ 64 <1056000000>;
opp-peak-kBps = <3072000 9216000>;
};
cpu4_opp11: opp-1132800000 {
opp-hz = /bits/ 64 <1132800000>;
opp-peak-kBps = <3072000 11980800>;
};
cpu4_opp12: opp-1209600000 {
opp-hz = /bits/ 64 <1209600000>;
opp-peak-kBps = <4068000 11980800>;
};
cpu4_opp13: opp-1286400000 {
opp-hz = /bits/ 64 <1286400000>;
opp-peak-kBps = <4068000 11980800>;
};
cpu4_opp14: opp-1363200000 {
opp-hz = /bits/ 64 <1363200000>;
opp-peak-kBps = <4068000 15052800>;
};
cpu4_opp15: opp-1459200000 {
opp-hz = /bits/ 64 <1459200000>;
opp-peak-kBps = <4068000 15052800>;
};
cpu4_opp16: opp-1536000000 {
opp-hz = /bits/ 64 <1536000000>;
opp-peak-kBps = <5412000 15052800>;
};
cpu4_opp17: opp-1612800000 {
opp-hz = /bits/ 64 <1612800000>;
opp-peak-kBps = <5412000 15052800>;
};
cpu4_opp18: opp-1689600000 {
opp-hz = /bits/ 64 <1689600000>;
opp-peak-kBps = <5412000 19353600>;
};
cpu4_opp19: opp-1766400000 {
opp-hz = /bits/ 64 <1766400000>;
opp-peak-kBps = <6220000 19353600>;
};
cpu4_opp20: opp-1843200000 {
opp-hz = /bits/ 64 <1843200000>;
opp-peak-kBps = <6220000 19353600>;
};
cpu4_opp21: opp-1920000000 {
opp-hz = /bits/ 64 <1920000000>;
opp-peak-kBps = <7216000 19353600>;
};
cpu4_opp22: opp-1996800000 {
opp-hz = /bits/ 64 <1996800000>;
opp-peak-kBps = <7216000 20889600>;
};
cpu4_opp23: opp-2092800000 {
opp-hz = /bits/ 64 <2092800000>;
opp-peak-kBps = <7216000 20889600>;
};
cpu4_opp24: opp-2169600000 {
opp-hz = /bits/ 64 <2169600000>;
opp-peak-kBps = <7216000 20889600>;
};
cpu4_opp25: opp-2246400000 {
opp-hz = /bits/ 64 <2246400000>;
opp-peak-kBps = <7216000 20889600>;
};
cpu4_opp26: opp-2323200000 {
opp-hz = /bits/ 64 <2323200000>;
opp-peak-kBps = <7216000 20889600>;
};
cpu4_opp27: opp-2400000000 {
opp-hz = /bits/ 64 <2400000000>;
opp-peak-kBps = <7216000 22425600>;
};
cpu4_opp28: opp-2476800000 {
opp-hz = /bits/ 64 <2476800000>;
opp-peak-kBps = <7216000 22425600>;
};
cpu4_opp29: opp-2553600000 {
opp-hz = /bits/ 64 <2553600000>;
opp-peak-kBps = <7216000 22425600>;
};
cpu4_opp30: opp-2649600000 {
opp-hz = /bits/ 64 <2649600000>;
opp-peak-kBps = <7216000 22425600>;
};
cpu4_opp31: opp-2745600000 {
opp-hz = /bits/ 64 <2745600000>;
opp-peak-kBps = <7216000 25497600>;
};
cpu4_opp32: opp-2803200000 {
opp-hz = /bits/ 64 <2803200000>;
opp-peak-kBps = <7216000 25497600>;
};
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
};
clocks {
xo_board: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <38400000>;
clock-output-names = "xo_board";
};
sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32764>;
};
};
firmware {
scm {
compatible = "qcom,scm-sdm845", "qcom,scm";
};
};
adsp_pas: remoteproc-adsp {
compatible = "qcom,sdm845-adsp-pas";
interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
memory-region = <&adsp_mem>;
qcom,qmp = <&aoss_qmp>;
qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
glink-edge {
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
label = "lpass";
qcom,remote-pid = <2>;
mboxes = <&apss_shared 8>;
apr {
compatible = "qcom,apr-v2";
qcom,glink-channels = "apr_audio_svc";
qcom,apr-domain = <APR_DOMAIN_ADSP>;
#address-cells = <1>;
#size-cells = <0>;
qcom,intents = <512 20>;
apr-service@3 {
reg = <APR_SVC_ADSP_CORE>;
compatible = "qcom,q6core";
qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
};
q6afe: apr-service@4 {
compatible = "qcom,q6afe";
reg = <APR_SVC_AFE>;
qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
q6afedai: dais {
compatible = "qcom,q6afe-dais";
#address-cells = <1>;
#size-cells = <0>;
#sound-dai-cells = <1>;
};
};
q6asm: apr-service@7 {
compatible = "qcom,q6asm";
reg = <APR_SVC_ASM>;
qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
q6asmdai: dais {
compatible = "qcom,q6asm-dais";
#address-cells = <1>;
#size-cells = <0>;
#sound-dai-cells = <1>;
iommus = <&apps_smmu 0x1821 0x0>;
};
};
q6adm: apr-service@8 {
compatible = "qcom,q6adm";
reg = <APR_SVC_ADM>;
qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
q6routing: routing {
compatible = "qcom,q6adm-routing";
#sound-dai-cells = <0>;
};
};
};
fastrpc {
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
label = "adsp";
#address-cells = <1>;
#size-cells = <0>;
compute-cb@3 {
compatible = "qcom,fastrpc-compute-cb";
reg = <3>;
iommus = <&apps_smmu 0x1823 0x0>;
};
compute-cb@4 {
compatible = "qcom,fastrpc-compute-cb";
reg = <4>;
iommus = <&apps_smmu 0x1824 0x0>;
};
};
};
};
cdsp_pas: remoteproc-cdsp {
compatible = "qcom,sdm845-cdsp-pas";
interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
<&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
memory-region = <&cdsp_mem>;
qcom,qmp = <&aoss_qmp>;
qcom,smem-states = <&cdsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
glink-edge {
interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
label = "turing";
qcom,remote-pid = <5>;
mboxes = <&apss_shared 4>;
fastrpc {
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
label = "cdsp";
#address-cells = <1>;
#size-cells = <0>;
compute-cb@1 {
compatible = "qcom,fastrpc-compute-cb";
reg = <1>;
iommus = <&apps_smmu 0x1401 0x30>;
};
compute-cb@2 {
compatible = "qcom,fastrpc-compute-cb";
reg = <2>;
iommus = <&apps_smmu 0x1402 0x30>;
};
compute-cb@3 {
compatible = "qcom,fastrpc-compute-cb";
reg = <3>;
iommus = <&apps_smmu 0x1403 0x30>;
};
compute-cb@4 {
compatible = "qcom,fastrpc-compute-cb";
reg = <4>;
iommus = <&apps_smmu 0x1404 0x30>;
};
compute-cb@5 {
compatible = "qcom,fastrpc-compute-cb";
reg = <5>;
iommus = <&apps_smmu 0x1405 0x30>;
};
compute-cb@6 {
compatible = "qcom,fastrpc-compute-cb";
reg = <6>;
iommus = <&apps_smmu 0x1406 0x30>;
};
compute-cb@7 {
compatible = "qcom,fastrpc-compute-cb";
reg = <7>;
iommus = <&apps_smmu 0x1407 0x30>;
};
compute-cb@8 {
compatible = "qcom,fastrpc-compute-cb";
reg = <8>;
iommus = <&apps_smmu 0x1408 0x30>;
};
};
};
};
tcsr_mutex: hwlock {
compatible = "qcom,tcsr-mutex";
syscon = <&tcsr_mutex_regs 0 0x1000>;
#hwlock-cells = <1>;
};
smp2p-cdsp {
compatible = "qcom,smp2p";
qcom,smem = <94>, <432>;
interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 6>;
qcom,local-pid = <0>;
qcom,remote-pid = <5>;
cdsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
cdsp_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-lpass {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 10>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
adsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
adsp_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-mpss {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 14>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
modem_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
modem_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
ipa_smp2p_out: ipa-ap-to-modem {
qcom,entry-name = "ipa";
#qcom,smem-state-cells = <1>;
};
ipa_smp2p_in: ipa-modem-to-ap {
qcom,entry-name = "ipa";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-slpi {
compatible = "qcom,smp2p";
qcom,smem = <481>, <430>;
interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 26>;
qcom,local-pid = <0>;
qcom,remote-pid = <3>;
slpi_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
slpi_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
soc: soc@0 {
#address-cells = <2>;
#size-cells = <2>;
ranges = <0 0 0 0 0x10 0>;
dma-ranges = <0 0 0 0 0x10 0>;
compatible = "simple-bus";
gcc: clock-controller@100000 {
compatible = "qcom,gcc-sdm845";
reg = <0 0x00100000 0 0x1f0000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>,
<&pcie0_lane>,
<&pcie1_lane>;
clock-names = "bi_tcxo",
"bi_tcxo_ao",
"sleep_clk",
"pcie_0_pipe_clk",
"pcie_1_pipe_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
qfprom@784000 {
compatible = "qcom,qfprom";
reg = <0 0x00784000 0 0x8ff>;
#address-cells = <1>;
#size-cells = <1>;
qusb2p_hstx_trim: hstx-trim-primary@1eb {
reg = <0x1eb 0x1>;
bits = <1 4>;
};
qusb2s_hstx_trim: hstx-trim-secondary@1eb {
reg = <0x1eb 0x2>;
bits = <6 4>;
};
};
rng: rng@793000 {
compatible = "qcom,prng-ee";
reg = <0 0x00793000 0 0x1000>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
qup_opp_table: qup-opp-table {
compatible = "operating-points-v2";
opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
opp-75000000 {
opp-hz = /bits/ 64 <75000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-128000000 {
opp-hz = /bits/ 64 <128000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x008c0000 0 0x6000>;
clock-names = "m-ahb", "s-ahb";
clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
iommus = <&apps_smmu 0x3 0x0>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core";
status = "disabled";
i2c0: i2c@880000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00880000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
spi0: spi@880000 {
compatible = "qcom,geni-spi";
reg = <0 0x00880000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart0: serial@880000 {
compatible = "qcom,geni-uart";
reg = <0 0x00880000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c1: i2c@884000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00884000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
spi1: spi@884000 {
compatible = "qcom,geni-spi";
reg = <0 0x00884000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart1: serial@884000 {
compatible = "qcom,geni-uart";
reg = <0 0x00884000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c2: i2c@888000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00888000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
spi2: spi@888000 {
compatible = "qcom,geni-spi";
reg = <0 0x00888000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart2: serial@888000 {
compatible = "qcom,geni-uart";
reg = <0 0x00888000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c3: i2c@88c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0088c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
spi3: spi@88c000 {
compatible = "qcom,geni-spi";
reg = <0 0x0088c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart3: serial@88c000 {
compatible = "qcom,geni-uart";
reg = <0 0x0088c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c4: i2c@890000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00890000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
spi4: spi@890000 {
compatible = "qcom,geni-spi";
reg = <0 0x00890000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart4: serial@890000 {
compatible = "qcom,geni-uart";
reg = <0 0x00890000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c5: i2c@894000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00894000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
spi5: spi@894000 {
compatible = "qcom,geni-spi";
reg = <0 0x00894000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart5: serial@894000 {
compatible = "qcom,geni-uart";
reg = <0 0x00894000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c6: i2c@898000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00898000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
spi6: spi@898000 {
compatible = "qcom,geni-spi";
reg = <0 0x00898000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart6: serial@898000 {
compatible = "qcom,geni-uart";
reg = <0 0x00898000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c7: i2c@89c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0089c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c7_default>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
spi7: spi@89c000 {
compatible = "qcom,geni-spi";
reg = <0 0x0089c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi7_default>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart7: serial@89c000 {
compatible = "qcom,geni-uart";
reg = <0 0x0089c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_default>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
};
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x00ac0000 0 0x6000>;
clock-names = "m-ahb", "s-ahb";
clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
iommus = <&apps_smmu 0x6c3 0x0>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core";
status = "disabled";
i2c8: i2c@a80000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a80000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c8_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
spi8: spi@a80000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a80000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi8_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart8: serial@a80000 {
compatible = "qcom,geni-uart";
reg = <0 0x00a80000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart8_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c9: i2c@a84000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a84000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c9_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
spi9: spi@a84000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a84000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi9_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart9: serial@a84000 {
compatible = "qcom,geni-debug-uart";
reg = <0 0x00a84000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart9_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c10: i2c@a88000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a88000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c10_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
spi10: spi@a88000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a88000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi10_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart10: serial@a88000 {
compatible = "qcom,geni-uart";
reg = <0 0x00a88000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart10_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c11: i2c@a8c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a8c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c11_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
spi11: spi@a8c000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a8c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi11_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart11: serial@a8c000 {
compatible = "qcom,geni-uart";
reg = <0 0x00a8c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart11_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c12: i2c@a90000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a90000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
spi12: spi@a90000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a90000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart12: serial@a90000 {
compatible = "qcom,geni-uart";
reg = <0 0x00a90000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c13: i2c@a94000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a94000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c13_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
spi13: spi@a94000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a94000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi13_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart13: serial@a94000 {
compatible = "qcom,geni-uart";
reg = <0 0x00a94000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart13_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c14: i2c@a98000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a98000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c14_default>;
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
spi14: spi@a98000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a98000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi14_default>;
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart14: serial@a98000 {
compatible = "qcom,geni-uart";
reg = <0 0x00a98000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart14_default>;
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c15: i2c@a9c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a9c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c15_default>;
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled";
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
};
spi15: spi@a9c000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a9c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi15_default>;
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart15: serial@a9c000 {
compatible = "qcom,geni-uart";
reg = <0 0x00a9c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart15_default>;
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
};
system-cache-controller@1100000 {
compatible = "qcom,sdm845-llcc";
reg = <0 0x01100000 0 0x200000>, <0 0x01300000 0 0x50000>;
reg-names = "llcc_base", "llcc_broadcast_base";
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
pcie0: pci@1c00000 {
compatible = "qcom,pcie-sdm845", "snps,dw-pcie";
reg = <0 0x01c00000 0 0x2000>,
<0 0x60000000 0 0xf1d>,
<0 0x60000f20 0 0xa8>,
<0 0x60100000 0 0x100000>;
reg-names = "parf", "dbi", "elbi", "config";
device_type = "pci";
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
<0x02000000 0x0 0x60300000 0 0x60300000 0x0 0xd00000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
<&gcc GCC_PCIE_0_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
<&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
"slave_q2a",
"tbu";
iommus = <&apps_smmu 0x1c10 0xf>;
iommu-map = <0x0 &apps_smmu 0x1c10 0x1>,
<0x100 &apps_smmu 0x1c11 0x1>,
<0x200 &apps_smmu 0x1c12 0x1>,
<0x300 &apps_smmu 0x1c13 0x1>,
<0x400 &apps_smmu 0x1c14 0x1>,
<0x500 &apps_smmu 0x1c15 0x1>,
<0x600 &apps_smmu 0x1c16 0x1>,
<0x700 &apps_smmu 0x1c17 0x1>,
<0x800 &apps_smmu 0x1c18 0x1>,
<0x900 &apps_smmu 0x1c19 0x1>,
<0xa00 &apps_smmu 0x1c1a 0x1>,
<0xb00 &apps_smmu 0x1c1b 0x1>,
<0xc00 &apps_smmu 0x1c1c 0x1>,
<0xd00 &apps_smmu 0x1c1d 0x1>,
<0xe00 &apps_smmu 0x1c1e 0x1>,
<0xf00 &apps_smmu 0x1c1f 0x1>;
resets = <&gcc GCC_PCIE_0_BCR>;
reset-names = "pci";
power-domains = <&gcc PCIE_0_GDSC>;
phys = <&pcie0_lane>;
phy-names = "pciephy";
status = "disabled";
};
pcie0_phy: phy@1c06000 {
compatible = "qcom,sdm845-qmp-pcie-phy";
reg = <0 0x01c06000 0 0x18c>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_CLKREF_CLK>,
<&gcc GCC_PCIE_PHY_REFGEN_CLK>;
clock-names = "aux", "cfg_ahb", "ref", "refgen";
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "phy";
assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
assigned-clock-rates = <100000000>;
status = "disabled";
pcie0_lane: phy@1c06200 {
reg = <0 0x01c06200 0 0x128>,
<0 0x01c06400 0 0x1fc>,
<0 0x01c06800 0 0x218>,
<0 0x01c06600 0 0x70>;
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
clock-names = "pipe0";
#clock-cells = <0>;
#phy-cells = <0>;
clock-output-names = "pcie_0_pipe_clk";
};
};
pcie1: pci@1c08000 {
compatible = "qcom,pcie-sdm845", "snps,dw-pcie";
reg = <0 0x01c08000 0 0x2000>,
<0 0x40000000 0 0xf1d>,
<0 0x40000f20 0 0xa8>,
<0 0x40100000 0 0x100000>;
reg-names = "parf", "dbi", "elbi", "config";
device_type = "pci";
linux,pci-domain = <1>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
<0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
<&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_1_SLV_AXI_CLK>,
<&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
<&gcc GCC_PCIE_1_CLKREF_CLK>,
<&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
"slave_q2a",
"ref",
"tbu";
assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
assigned-clock-rates = <19200000>;
iommus = <&apps_smmu 0x1c00 0xf>;
iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
<0x100 &apps_smmu 0x1c01 0x1>,
<0x200 &apps_smmu 0x1c02 0x1>,
<0x300 &apps_smmu 0x1c03 0x1>,
<0x400 &apps_smmu 0x1c04 0x1>,
<0x500 &apps_smmu 0x1c05 0x1>,
<0x600 &apps_smmu 0x1c06 0x1>,
<0x700 &apps_smmu 0x1c07 0x1>,
<0x800 &apps_smmu 0x1c08 0x1>,
<0x900 &apps_smmu 0x1c09 0x1>,
<0xa00 &apps_smmu 0x1c0a 0x1>,
<0xb00 &apps_smmu 0x1c0b 0x1>,
<0xc00 &apps_smmu 0x1c0c 0x1>,
<0xd00 &apps_smmu 0x1c0d 0x1>,
<0xe00 &apps_smmu 0x1c0e 0x1>,
<0xf00 &apps_smmu 0x1c0f 0x1>;
resets = <&gcc GCC_PCIE_1_BCR>;
reset-names = "pci";
power-domains = <&gcc PCIE_1_GDSC>;
phys = <&pcie1_lane>;
phy-names = "pciephy";
status = "disabled";
};
pcie1_phy: phy@1c0a000 {
compatible = "qcom,sdm845-qhp-pcie-phy";
reg = <0 0x01c0a000 0 0x800>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_1_CLKREF_CLK>,
<&gcc GCC_PCIE_PHY_REFGEN_CLK>;
clock-names = "aux", "cfg_ahb", "ref", "refgen";
resets = <&gcc GCC_PCIE_1_PHY_BCR>;
reset-names = "phy";
assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
assigned-clock-rates = <100000000>;
status = "disabled";
pcie1_lane: phy@1c06200 {
reg = <0 0x01c0a800 0 0x800>,
<0 0x01c0a800 0 0x800>,
<0 0x01c0b800 0 0x400>;
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
clock-names = "pipe0";
#clock-cells = <0>;
#phy-cells = <0>;
clock-output-names = "pcie_1_pipe_clk";
};
};
mem_noc: interconnect@1380000 {
compatible = "qcom,sdm845-mem-noc";
reg = <0 0x01380000 0 0x27200>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
dc_noc: interconnect@14e0000 {
compatible = "qcom,sdm845-dc-noc";
reg = <0 0x014e0000 0 0x400>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
config_noc: interconnect@1500000 {
compatible = "qcom,sdm845-config-noc";
reg = <0 0x01500000 0 0x5080>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system_noc: interconnect@1620000 {
compatible = "qcom,sdm845-system-noc";
reg = <0 0x01620000 0 0x18080>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre1_noc: interconnect@16e0000 {
compatible = "qcom,sdm845-aggre1-noc";
reg = <0 0x016e0000 0 0x15080>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre2_noc: interconnect@1700000 {
compatible = "qcom,sdm845-aggre2-noc";
reg = <0 0x01700000 0 0x1f300>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mmss_noc: interconnect@1740000 {
compatible = "qcom,sdm845-mmss-noc";
reg = <0 0x01740000 0 0x1c100>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sdm845-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
reg = <0 0x01d84000 0 0x2500>,
<0 0x01d90000 0 0x8000>;
reg-names = "std", "ice";
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
phys = <&ufs_mem_phy_lanes>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
power-domains = <&gcc UFS_PHY_GDSC>;
#reset-cells = <1>;
resets = <&gcc GCC_UFS_PHY_BCR>;
reset-names = "rst";
iommus = <&apps_smmu 0x100 0xf>;
clock-names =
"core_clk",
"bus_aggr_clk",
"iface_clk",
"core_clk_unipro",
"ref_clk",
"tx_lane0_sync_clk",
"rx_lane0_sync_clk",
"rx_lane1_sync_clk",
"ice_core_clk";
clocks =
<&gcc GCC_UFS_PHY_AXI_CLK>,
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
<&gcc GCC_UFS_PHY_AHB_CLK>,
<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
freq-table-hz =
<50000000 200000000>,
<0 0>,
<0 0>,
<37500000 150000000>,
<0 0>,
<0 0>,
<0 0>,
<0 0>,
<0 300000000>;
status = "disabled";
};
ufs_mem_phy: phy@1d87000 {
compatible = "qcom,sdm845-qmp-ufs-phy";
reg = <0 0x01d87000 0 0x18c>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
clock-names = "ref",
"ref_aux";
clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
status = "disabled";
ufs_mem_phy_lanes: phy@1d87400 {
reg = <0 0x01d87400 0 0x108>,
<0 0x01d87600 0 0x1e0>,
<0 0x01d87c00 0 0x1dc>,
<0 0x01d87800 0 0x108>,
<0 0x01d87a00 0 0x1e0>;
#phy-cells = <0>;
};
};
cryptobam: dma-controller@1dc4000 {
compatible = "qcom,bam-v1.7.0";
reg = <0 0x01dc4000 0 0x24000>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rpmhcc RPMH_CE_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
qcom,controlled-remotely;
iommus = <&apps_smmu 0x704 0x1>,
<&apps_smmu 0x706 0x1>,
<&apps_smmu 0x714 0x1>,
<&apps_smmu 0x716 0x1>;
};
crypto: crypto@1dfa000 {
compatible = "qcom,crypto-v5.4";
reg = <0 0x01dfa000 0 0x6000>;
clocks = <&gcc GCC_CE1_AHB_CLK>,
<&gcc GCC_CE1_AXI_CLK>,
<&rpmhcc RPMH_CE_CLK>;
clock-names = "iface", "bus", "core";
dmas = <&cryptobam 6>, <&cryptobam 7>;
dma-names = "rx", "tx";
iommus = <&apps_smmu 0x704 0x1>,
<&apps_smmu 0x706 0x1>,
<&apps_smmu 0x714 0x1>,
<&apps_smmu 0x716 0x1>;
};
ipa: ipa@1e40000 {
compatible = "qcom,sdm845-ipa";
iommus = <&apps_smmu 0x720 0x0>,
<&apps_smmu 0x722 0x0>;
reg = <0 0x1e40000 0 0x7000>,
<0 0x1e47000 0 0x2000>,
<0 0x1e04000 0 0x2c000>;
reg-names = "ipa-reg",
"ipa-shared",
"gsi";
interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
<&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
<&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ipa",
"gsi",
"ipa-clock-query",
"ipa-setup-ready";
clocks = <&rpmhcc RPMH_IPA_CLK>;
clock-names = "core";
interconnects = <&aggre2_noc MASTER_IPA 0 &mem_noc SLAVE_EBI1 0>,
<&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
interconnect-names = "memory",
"imem",
"config";
qcom,smem-states = <&ipa_smp2p_out 0>,
<&ipa_smp2p_out 1>;
qcom,smem-state-names = "ipa-clock-enabled-valid",
"ipa-clock-enabled";
status = "disabled";
};
tcsr_mutex_regs: syscon@1f40000 {
compatible = "syscon";
reg = <0 0x01f40000 0 0x40000>;
};
tlmm: pinctrl@3400000 {
compatible = "qcom,sdm845-pinctrl";
reg = <0 0x03400000 0 0xc00000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&tlmm 0 0 151>;
wakeup-parent = <&pdc_intc>;
cci0_default: cci0-default {
/* SDA, SCL */
pins = "gpio17", "gpio18";
function = "cci_i2c";
bias-pull-up;
drive-strength = <2>; /* 2 mA */
};
cci0_sleep: cci0-sleep {
/* SDA, SCL */
pins = "gpio17", "gpio18";
function = "cci_i2c";
drive-strength = <2>; /* 2 mA */
bias-pull-down;
};
cci1_default: cci1-default {
/* SDA, SCL */
pins = "gpio19", "gpio20";
function = "cci_i2c";
bias-pull-up;
drive-strength = <2>; /* 2 mA */
};
cci1_sleep: cci1-sleep {
/* SDA, SCL */
pins = "gpio19", "gpio20";
function = "cci_i2c";
drive-strength = <2>; /* 2 mA */
bias-pull-down;
};
qspi_clk: qspi-clk {
pinmux {
pins = "gpio95";
function = "qspi_clk";
};
};
qspi_cs0: qspi-cs0 {
pinmux {
pins = "gpio90";
function = "qspi_cs";
};
};
qspi_cs1: qspi-cs1 {
pinmux {
pins = "gpio89";
function = "qspi_cs";
};
};
qspi_data01: qspi-data01 {
pinmux-data {
pins = "gpio91", "gpio92";
function = "qspi_data";
};
};
qspi_data12: qspi-data12 {
pinmux-data {
pins = "gpio93", "gpio94";
function = "qspi_data";
};
};
qup_i2c0_default: qup-i2c0-default {
pinmux {
pins = "gpio0", "gpio1";
function = "qup0";
};
};
qup_i2c1_default: qup-i2c1-default {
pinmux {
pins = "gpio17", "gpio18";
function = "qup1";
};
};
qup_i2c2_default: qup-i2c2-default {
pinmux {
pins = "gpio27", "gpio28";
function = "qup2";
};
};
qup_i2c3_default: qup-i2c3-default {
pinmux {
pins = "gpio41", "gpio42";
function = "qup3";
};
};
qup_i2c4_default: qup-i2c4-default {
pinmux {
pins = "gpio89", "gpio90";
function = "qup4";
};
};
qup_i2c5_default: qup-i2c5-default {
pinmux {
pins = "gpio85", "gpio86";
function = "qup5";
};
};
qup_i2c6_default: qup-i2c6-default {
pinmux {
pins = "gpio45", "gpio46";
function = "qup6";
};
};
qup_i2c7_default: qup-i2c7-default {
pinmux {
pins = "gpio93", "gpio94";
function = "qup7";
};
};
qup_i2c8_default: qup-i2c8-default {
pinmux {
pins = "gpio65", "gpio66";
function = "qup8";
};
};
qup_i2c9_default: qup-i2c9-default {
pinmux {
pins = "gpio6", "gpio7";
function = "qup9";
};
};
qup_i2c10_default: qup-i2c10-default {
pinmux {
pins = "gpio55", "gpio56";
function = "qup10";
};
};
qup_i2c11_default: qup-i2c11-default {
pinmux {
pins = "gpio31", "gpio32";
function = "qup11";
};
};
qup_i2c12_default: qup-i2c12-default {
pinmux {
pins = "gpio49", "gpio50";
function = "qup12";
};
};
qup_i2c13_default: qup-i2c13-default {
pinmux {
pins = "gpio105", "gpio106";
function = "qup13";
};
};
qup_i2c14_default: qup-i2c14-default {
pinmux {
pins = "gpio33", "gpio34";
function = "qup14";
};
};
qup_i2c15_default: qup-i2c15-default {
pinmux {
pins = "gpio81", "gpio82";
function = "qup15";
};
};
qup_spi0_default: qup-spi0-default {
pinmux {
pins = "gpio0", "gpio1",
"gpio2", "gpio3";
function = "qup0";
};
};
qup_spi1_default: qup-spi1-default {
pinmux {
pins = "gpio17", "gpio18",
"gpio19", "gpio20";
function = "qup1";
};
};
qup_spi2_default: qup-spi2-default {
pinmux {
pins = "gpio27", "gpio28",
"gpio29", "gpio30";
function = "qup2";
};
};
qup_spi3_default: qup-spi3-default {
pinmux {
pins = "gpio41", "gpio42",
"gpio43", "gpio44";
function = "qup3";
};
};
qup_spi4_default: qup-spi4-default {
pinmux {
pins = "gpio89", "gpio90",
"gpio91", "gpio92";
function = "qup4";
};
};
qup_spi5_default: qup-spi5-default {
pinmux {
pins = "gpio85", "gpio86",
"gpio87", "gpio88";
function = "qup5";
};
};
qup_spi6_default: qup-spi6-default {
pinmux {
pins = "gpio45", "gpio46",
"gpio47", "gpio48";
function = "qup6";
};
};
qup_spi7_default: qup-spi7-default {
pinmux {
pins = "gpio93", "gpio94",
"gpio95", "gpio96";
function = "qup7";
};
};
qup_spi8_default: qup-spi8-default {
pinmux {
pins = "gpio65", "gpio66",
"gpio67", "gpio68";
function = "qup8";
};
};
qup_spi9_default: qup-spi9-default {
pinmux {
pins = "gpio6", "gpio7",
"gpio4", "gpio5";
function = "qup9";
};
};
qup_spi10_default: qup-spi10-default {
pinmux {
pins = "gpio55", "gpio56",
"gpio53", "gpio54";
function = "qup10";
};
};
qup_spi11_default: qup-spi11-default {
pinmux {
pins = "gpio31", "gpio32",
"gpio33", "gpio34";
function = "qup11";
};
};
qup_spi12_default: qup-spi12-default {
pinmux {
pins = "gpio49", "gpio50",
"gpio51", "gpio52";
function = "qup12";
};
};
qup_spi13_default: qup-spi13-default {
pinmux {
pins = "gpio105", "gpio106",
"gpio107", "gpio108";
function = "qup13";
};
};
qup_spi14_default: qup-spi14-default {
pinmux {
pins = "gpio33", "gpio34",
"gpio31", "gpio32";
function = "qup14";
};
};
qup_spi15_default: qup-spi15-default {
pinmux {
pins = "gpio81", "gpio82",
"gpio83", "gpio84";
function = "qup15";
};
};
qup_uart0_default: qup-uart0-default {
pinmux {
pins = "gpio2", "gpio3";
function = "qup0";
};
};
qup_uart1_default: qup-uart1-default {
pinmux {
pins = "gpio19", "gpio20";
function = "qup1";
};
};
qup_uart2_default: qup-uart2-default {
pinmux {
pins = "gpio29", "gpio30";
function = "qup2";
};
};
qup_uart3_default: qup-uart3-default {
pinmux {
pins = "gpio43", "gpio44";
function = "qup3";
};
};
qup_uart4_default: qup-uart4-default {
pinmux {
pins = "gpio91", "gpio92";
function = "qup4";
};
};
qup_uart5_default: qup-uart5-default {
pinmux {
pins = "gpio87", "gpio88";
function = "qup5";
};
};
qup_uart6_default: qup-uart6-default {
pinmux {
pins = "gpio47", "gpio48";
function = "qup6";
};
};
qup_uart7_default: qup-uart7-default {
pinmux {
pins = "gpio95", "gpio96";
function = "qup7";
};
};
qup_uart8_default: qup-uart8-default {
pinmux {
pins = "gpio67", "gpio68";
function = "qup8";
};
};
qup_uart9_default: qup-uart9-default {
pinmux {
pins = "gpio4", "gpio5";
function = "qup9";
};
};
qup_uart10_default: qup-uart10-default {
pinmux {
pins = "gpio53", "gpio54";
function = "qup10";
};
};
qup_uart11_default: qup-uart11-default {
pinmux {
pins = "gpio33", "gpio34";
function = "qup11";
};
};
qup_uart12_default: qup-uart12-default {
pinmux {
pins = "gpio51", "gpio52";
function = "qup12";
};
};
qup_uart13_default: qup-uart13-default {
pinmux {
pins = "gpio107", "gpio108";
function = "qup13";
};
};
qup_uart14_default: qup-uart14-default {
pinmux {
pins = "gpio31", "gpio32";
function = "qup14";
};
};
qup_uart15_default: qup-uart15-default {
pinmux {
pins = "gpio83", "gpio84";
function = "qup15";
};
};
quat_mi2s_sleep: quat_mi2s_sleep {
mux {
pins = "gpio58", "gpio59";
function = "gpio";
};
config {
pins = "gpio58", "gpio59";
drive-strength = <2>;
bias-pull-down;
input-enable;
};
};
quat_mi2s_active: quat_mi2s_active {
mux {
pins = "gpio58", "gpio59";
function = "qua_mi2s";
};
config {
pins = "gpio58", "gpio59";
drive-strength = <8>;
bias-disable;
output-high;
};
};
quat_mi2s_sd0_sleep: quat_mi2s_sd0_sleep {
mux {
pins = "gpio60";
function = "gpio";
};
config {
pins = "gpio60";
drive-strength = <2>;
bias-pull-down;
input-enable;
};
};
quat_mi2s_sd0_active: quat_mi2s_sd0_active {
mux {
pins = "gpio60";
function = "qua_mi2s";
};
config {
pins = "gpio60";
drive-strength = <8>;
bias-disable;
};
};
quat_mi2s_sd1_sleep: quat_mi2s_sd1_sleep {
mux {
pins = "gpio61";
function = "gpio";
};
config {
pins = "gpio61";
drive-strength = <2>;
bias-pull-down;
input-enable;
};
};
quat_mi2s_sd1_active: quat_mi2s_sd1_active {
mux {
pins = "gpio61";
function = "qua_mi2s";
};
config {
pins = "gpio61";
drive-strength = <8>;
bias-disable;
};
};
quat_mi2s_sd2_sleep: quat_mi2s_sd2_sleep {
mux {
pins = "gpio62";
function = "gpio";
};
config {
pins = "gpio62";
drive-strength = <2>;
bias-pull-down;
input-enable;
};
};
quat_mi2s_sd2_active: quat_mi2s_sd2_active {
mux {
pins = "gpio62";
function = "qua_mi2s";
};
config {
pins = "gpio62";
drive-strength = <8>;
bias-disable;
};
};
quat_mi2s_sd3_sleep: quat_mi2s_sd3_sleep {
mux {
pins = "gpio63";
function = "gpio";
};
config {
pins = "gpio63";
drive-strength = <2>;
bias-pull-down;
input-enable;
};
};
quat_mi2s_sd3_active: quat_mi2s_sd3_active {
mux {
pins = "gpio63";
function = "qua_mi2s";
};
config {
pins = "gpio63";
drive-strength = <8>;
bias-disable;
};
};
};
mss_pil: remoteproc@4080000 {
compatible = "qcom,sdm845-mss-pil";
reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>;
reg-names = "qdsp6", "rmb";
interrupts-extended =
<&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack",
"shutdown-ack";
clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
<&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
<&gcc GCC_BOOT_ROM_AHB_CLK>,
<&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
<&gcc GCC_MSS_SNOC_AXI_CLK>,
<&gcc GCC_MSS_MFAB_AXIS_CLK>,
<&gcc GCC_PRNG_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "bus", "mem", "gpll0_mss",
"snoc_axi", "mnoc_axi", "prng", "xo";
qcom,qmp = <&aoss_qmp>;
qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";
resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
<&pdc_reset PDC_MODEM_SYNC_RESET>;
reset-names = "mss_restart", "pdc_reset";
qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
power-domains = <&rpmhpd SDM845_CX>,
<&rpmhpd SDM845_MX>,
<&rpmhpd SDM845_MSS>;
power-domain-names = "cx", "mx", "mss";
status = "disabled";
mba {
memory-region = <&mba_region>;
};
mpss {
memory-region = <&mpss_region>;
};
glink-edge {
interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
label = "modem";
qcom,remote-pid = <1>;
mboxes = <&apss_shared 12>;
};
};
gpucc: clock-controller@5090000 {
compatible = "qcom,sdm845-gpucc";
reg = <0 0x05090000 0 0x9000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_GPU_GPLL0_CLK_SRC>,
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
clock-names = "bi_tcxo",
"gcc_gpu_gpll0_clk_src",
"gcc_gpu_gpll0_div_clk_src";
};
stm@6002000 {
compatible = "arm,coresight-stm", "arm,primecell";
reg = <0 0x06002000 0 0x1000>,
<0 0x16280000 0 0x180000>;
reg-names = "stm-base", "stm-stimulus-base";
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
stm_out: endpoint {
remote-endpoint =
<&funnel0_in7>;
};
};
};
};
funnel@6041000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x06041000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
funnel0_out: endpoint {
remote-endpoint =
<&merge_funnel_in0>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@7 {
reg = <7>;
funnel0_in7: endpoint {
remote-endpoint = <&stm_out>;
};
};
};
};
funnel@6043000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x06043000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
funnel2_out: endpoint {
remote-endpoint =
<&merge_funnel_in2>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@5 {
reg = <5>;
funnel2_in5: endpoint {
remote-endpoint =
<&apss_merge_funnel_out>;
};
};
};
};
funnel@6045000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x06045000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
merge_funnel_out: endpoint {
remote-endpoint = <&etf_in>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
merge_funnel_in0: endpoint {
remote-endpoint =
<&funnel0_out>;
};
};
port@2 {
reg = <2>;
merge_funnel_in2: endpoint {
remote-endpoint =
<&funnel2_out>;
};
};
};
};
replicator@6046000 {
compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
reg = <0 0x06046000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
replicator_out: endpoint {
remote-endpoint = <&etr_in>;
};
};
};
in-ports {
port {
replicator_in: endpoint {
remote-endpoint = <&etf_out>;
};
};
};
};
etf@6047000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x06047000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
etf_out: endpoint {
remote-endpoint =
<&replicator_in>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
etf_in: endpoint {
remote-endpoint =
<&merge_funnel_out>;
};
};
};
};
etr@6048000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x06048000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,scatter-gather;
in-ports {
port {
etr_in: endpoint {
remote-endpoint =
<&replicator_out>;
};
};
};
};
etm@7040000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07040000 0 0x1000>;
cpu = <&CPU0>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
out-ports {
port {
etm0_out: endpoint {
remote-endpoint =
<&apss_funnel_in0>;
};
};
};
};
etm@7140000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07140000 0 0x1000>;
cpu = <&CPU1>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
out-ports {
port {
etm1_out: endpoint {
remote-endpoint =
<&apss_funnel_in1>;
};
};
};
};
etm@7240000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07240000 0 0x1000>;
cpu = <&CPU2>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
out-ports {
port {
etm2_out: endpoint {
remote-endpoint =
<&apss_funnel_in2>;
};
};
};
};
etm@7340000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07340000 0 0x1000>;
cpu = <&CPU3>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
out-ports {
port {
etm3_out: endpoint {
remote-endpoint =
<&apss_funnel_in3>;
};
};
};
};
etm@7440000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07440000 0 0x1000>;
cpu = <&CPU4>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
out-ports {
port {
etm4_out: endpoint {
remote-endpoint =
<&apss_funnel_in4>;
};
};
};
};
etm@7540000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07540000 0 0x1000>;
cpu = <&CPU5>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
out-ports {
port {
etm5_out: endpoint {
remote-endpoint =
<&apss_funnel_in5>;
};
};
};
};
etm@7640000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07640000 0 0x1000>;
cpu = <&CPU6>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
out-ports {
port {
etm6_out: endpoint {
remote-endpoint =
<&apss_funnel_in6>;
};
};
};
};
etm@7740000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07740000 0 0x1000>;
cpu = <&CPU7>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
out-ports {
port {
etm7_out: endpoint {
remote-endpoint =
<&apss_funnel_in7>;
};
};
};
};
funnel@7800000 { /* APSS Funnel */
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x07800000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
apss_funnel_out: endpoint {
remote-endpoint =
<&apss_merge_funnel_in>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
apss_funnel_in0: endpoint {
remote-endpoint =
<&etm0_out>;
};
};
port@1 {
reg = <1>;
apss_funnel_in1: endpoint {
remote-endpoint =
<&etm1_out>;
};
};
port@2 {
reg = <2>;
apss_funnel_in2: endpoint {
remote-endpoint =
<&etm2_out>;
};
};
port@3 {
reg = <3>;
apss_funnel_in3: endpoint {
remote-endpoint =
<&etm3_out>;
};
};
port@4 {
reg = <4>;
apss_funnel_in4: endpoint {
remote-endpoint =
<&etm4_out>;
};
};
port@5 {
reg = <5>;
apss_funnel_in5: endpoint {
remote-endpoint =
<&etm5_out>;
};
};
port@6 {
reg = <6>;
apss_funnel_in6: endpoint {
remote-endpoint =
<&etm6_out>;
};
};
port@7 {
reg = <7>;
apss_funnel_in7: endpoint {
remote-endpoint =
<&etm7_out>;
};
};
};
};
funnel@7810000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x07810000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
apss_merge_funnel_out: endpoint {
remote-endpoint =
<&funnel2_in5>;
};
};
};
in-ports {
port {
apss_merge_funnel_in: endpoint {
remote-endpoint =
<&apss_funnel_out>;
};
};
};
};
sdhc_2: sdhci@8804000 {
compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "core", "xo";
iommus = <&apps_smmu 0xa0 0xf>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&sdhc2_opp_table>;
status = "disabled";
sdhc2_opp_table: sdhc2-opp-table {
compatible = "operating-points-v2";
opp-9600000 {
opp-hz = /bits/ 64 <9600000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
opp-19200000 {
opp-hz = /bits/ 64 <19200000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-201500000 {
opp-hz = /bits/ 64 <201500000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
};
};
qspi_opp_table: qspi-opp-table {
compatible = "operating-points-v2";
opp-19200000 {
opp-hz = /bits/ 64 <19200000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-150000000 {
opp-hz = /bits/ 64 <150000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
qspi: spi@88df000 {
compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
reg = <0 0x088df000 0 0x600>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
<&gcc GCC_QSPI_CORE_CLK>;
clock-names = "iface", "core";
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qspi_opp_table>;
status = "disabled";
};
slim: slim@171c0000 {
compatible = "qcom,slim-ngd-v2.1.0";
reg = <0 0x171c0000 0 0x2c000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
qcom,apps-ch-pipes = <0x780000>;
qcom,ea-pc = <0x270>;
status = "okay";
dmas = <&slimbam 3>, <&slimbam 4>,
<&slimbam 5>, <&slimbam 6>;
dma-names = "rx", "tx", "tx2", "rx2";
iommus = <&apps_smmu 0x1806 0x0>;
#address-cells = <1>;
#size-cells = <0>;
ngd@1 {
reg = <1>;
#address-cells = <2>;
#size-cells = <0>;
wcd9340_ifd: ifd@0{
compatible = "slim217,250";
reg = <0 0>;
};
wcd9340: codec@1{
compatible = "slim217,250";
reg = <1 0>;
slim-ifc-dev = <&wcd9340_ifd>;
#sound-dai-cells = <1>;
interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
#clock-cells = <0>;
clock-frequency = <9600000>;
clock-output-names = "mclk";
qcom,micbias1-millivolt = <1800>;
qcom,micbias2-millivolt = <1800>;
qcom,micbias3-millivolt = <1800>;
qcom,micbias4-millivolt = <1800>;
#address-cells = <1>;
#size-cells = <1>;
wcdgpio: gpio-controller@42 {
compatible = "qcom,wcd9340-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x42 0x2>;
};
swm: swm@c85 {
compatible = "qcom,soundwire-v1.3.0";
reg = <0xc85 0x40>;
interrupts-extended = <&wcd9340 20>;
qcom,dout-ports = <6>;
qcom,din-ports = <2>;
qcom,ports-sinterval-low =/bits/ 8 <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>;
qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >;
qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>;
#sound-dai-cells = <1>;
clocks = <&wcd9340>;
clock-names = "iface";
#address-cells = <2>;
#size-cells = <0>;
};
};
};
};
lmh_cluster1: lmh@17d70800 {
compatible = "qcom,sdm845-lmh";
reg = <0 0x17d70800 0 0x400>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
cpus = <&CPU4>;
qcom,lmh-temp-arm-millicelsius = <65000>;
qcom,lmh-temp-low-millicelsius = <94500>;
qcom,lmh-temp-high-millicelsius = <95000>;
interrupt-controller;
#interrupt-cells = <1>;
};
lmh_cluster0: lmh@17d78800 {
compatible = "qcom,sdm845-lmh";
reg = <0 0x17d78800 0 0x400>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
cpus = <&CPU0>;
qcom,lmh-temp-arm-millicelsius = <65000>;
qcom,lmh-temp-low-millicelsius = <94500>;
qcom,lmh-temp-high-millicelsius = <95000>;
interrupt-controller;
#interrupt-cells = <1>;
};
sound: sound {
};
usb_1_hsphy: phy@88e2000 {
compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy";
reg = <0 0x088e2000 0 0x400>;
status = "disabled";
#phy-cells = <0>;
clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
nvmem-cells = <&qusb2p_hstx_trim>;
};
usb_2_hsphy: phy@88e3000 {
compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy";
reg = <0 0x088e3000 0 0x400>;
status = "disabled";
#phy-cells = <0>;
clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
nvmem-cells = <&qusb2s_hstx_trim>;
};
usb_1_qmpphy: phy@88e9000 {
compatible = "qcom,sdm845-qmp-usb3-phy";
reg = <0 0x088e9000 0 0x18c>,
<0 0x088e8000 0 0x10>;
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
ranges;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
clock-names = "aux", "cfg_ahb", "ref", "com_aux";
resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
<&gcc GCC_USB3_PHY_PRIM_BCR>;
reset-names = "phy", "common";
usb_1_ssphy: phy@88e9200 {
reg = <0 0x088e9200 0 0x128>,
<0 0x088e9400 0 0x200>,
<0 0x088e9c00 0 0x218>,
<0 0x088e9600 0 0x128>,
<0 0x088e9800 0 0x200>,
<0 0x088e9a00 0 0x100>;
#clock-cells = <0>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb3_phy_pipe_clk_src";
};
};
usb_2_qmpphy: phy@88eb000 {
compatible = "qcom,sdm845-qmp-usb3-uni-phy";
reg = <0 0x088eb000 0 0x18c>;
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
ranges;
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_CLK>,
<&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
clock-names = "aux", "cfg_ahb", "ref", "com_aux";
resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
<&gcc GCC_USB3_PHY_SEC_BCR>;
reset-names = "phy", "common";
usb_2_ssphy: phy@88eb200 {
reg = <0 0x088eb200 0 0x128>,
<0 0x088eb400 0 0x1fc>,
<0 0x088eb800 0 0x218>,
<0 0x088eb600 0 0x70>;
#clock-cells = <0>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb3_uni_phy_pipe_clk_src";
};
};
usb_1: usb@a6f8800 {
compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
ranges;
dma-ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_SLEEP_CLK>;
clock-names = "cfg_noc", "core", "iface", "mock_utmi",
"sleep";
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
resets = <&gcc GCC_USB30_PRIM_BCR>;
interconnects = <&aggre2_noc MASTER_USB3_0 0 &mem_noc SLAVE_EBI1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
interconnect-names = "usb-ddr", "apps-usb";
usb_1_dwc3: dwc3@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x740 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
usb_2: usb@a8f8800 {
compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
reg = <0 0x0a8f8800 0 0x400>;
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
ranges;
dma-ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
<&gcc GCC_USB30_SEC_MASTER_CLK>,
<&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
<&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_SEC_SLEEP_CLK>;
clock-names = "cfg_noc", "core", "iface", "mock_utmi",
"sleep";
assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_SEC_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
power-domains = <&gcc USB30_SEC_GDSC>;
resets = <&gcc GCC_USB30_SEC_BCR>;
interconnects = <&aggre2_noc MASTER_USB3_1 0 &mem_noc SLAVE_EBI1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
interconnect-names = "usb-ddr", "apps-usb";
usb_2_dwc3: dwc3@a800000 {
compatible = "snps,dwc3";
reg = <0 0x0a800000 0 0xcd00>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x760 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
venus: video-codec@aa00000 {
compatible = "qcom,sdm845-venus-v2";
reg = <0 0x0aa00000 0 0xff000>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&videocc VENUS_GDSC>,
<&videocc VCODEC0_GDSC>,
<&videocc VCODEC1_GDSC>,
<&rpmhpd SDM845_CX>;
power-domain-names = "venus", "vcodec0", "vcodec1", "cx";
operating-points-v2 = <&venus_opp_table>;
clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
<&videocc VIDEO_CC_VENUS_AHB_CLK>,
<&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
<&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
<&videocc VIDEO_CC_VCODEC0_AXI_CLK>,
<&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
<&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
clock-names = "core", "iface", "bus",
"vcodec0_core", "vcodec0_bus",
"vcodec1_core", "vcodec1_bus";
iommus = <&apps_smmu 0x10a0 0x8>,
<&apps_smmu 0x10b0 0x0>;
memory-region = <&venus_mem>;
interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mem_noc SLAVE_EBI1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
interconnect-names = "video-mem", "cpu-cfg";
status = "disabled";
video-core0 {
compatible = "venus-decoder";
};
video-core1 {
compatible = "venus-encoder";
};
venus_opp_table: venus-opp-table {
compatible = "operating-points-v2";
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-320000000 {
opp-hz = /bits/ 64 <320000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-380000000 {
opp-hz = /bits/ 64 <380000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-444000000 {
opp-hz = /bits/ 64 <444000000>;
required-opps = <&rpmhpd_opp_nom>;
};
opp-533000097 {
opp-hz = /bits/ 64 <533000097>;
required-opps = <&rpmhpd_opp_turbo>;
};
};
};
videocc: clock-controller@ab00000 {
compatible = "qcom,sdm845-videocc";
reg = <0 0x0ab00000 0 0x10000>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "bi_tcxo";
#clock-cells = <1>;
#power-domain-cells = <1>;
#reset-cells = <1>;
};
camss: camss@a00000 {
compatible = "qcom,sdm845-camss";
reg = <0 0xacb3000 0 0x1000>,
<0 0xacba000 0 0x1000>,
<0 0xacc8000 0 0x1000>,
<0 0xac65000 0 0x1000>,
<0 0xac66000 0 0x1000>,
<0 0xac67000 0 0x1000>,
<0 0xac68000 0 0x1000>,
<0 0xacaf000 0 0x4000>,
<0 0xacb6000 0 0x4000>,
<0 0xacc4000 0 0x4000>;
reg-names = "csid0",
"csid1",
"csid2",
"csiphy0",
"csiphy1",
"csiphy2",
"csiphy3",
"vfe0",
"vfe1",
"vfe_lite";
interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "csid0",
"csid1",
"csid2",
"csiphy0",
"csiphy1",
"csiphy2",
"csiphy3",
"vfe0",
"vfe1",
"vfe_lite";
power-domains = <&clock_camcc IFE_0_GDSC>,
<&clock_camcc IFE_1_GDSC>,
<&clock_camcc TITAN_TOP_GDSC>;
clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
<&clock_camcc CAM_CC_CPAS_AHB_CLK>,
<&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
<&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
<&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>,
<&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
<&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>,
<&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>,
<&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>,
<&clock_camcc CAM_CC_CSIPHY0_CLK>,
<&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
<&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
<&clock_camcc CAM_CC_CSIPHY1_CLK>,
<&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
<&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
<&clock_camcc CAM_CC_CSIPHY2_CLK>,
<&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
<&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
<&clock_camcc CAM_CC_CSIPHY3_CLK>,
<&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
<&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>,
<&gcc GCC_CAMERA_AHB_CLK>,
<&gcc GCC_CAMERA_AXI_CLK>,
<&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
<&clock_camcc CAM_CC_SOC_AHB_CLK>,
<&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
<&clock_camcc CAM_CC_IFE_0_CLK>,
<&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
<&clock_camcc CAM_CC_IFE_0_CLK_SRC>,
<&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
<&clock_camcc CAM_CC_IFE_1_CLK>,
<&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
<&clock_camcc CAM_CC_IFE_1_CLK_SRC>,
<&clock_camcc CAM_CC_IFE_LITE_CLK>,
<&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
<&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>;
clock-names = "camnoc_axi",
"cpas_ahb",
"cphy_rx_src",
"csi0",
"csi0_src",
"csi1",
"csi1_src",
"csi2",
"csi2_src",
"csiphy0",
"csiphy0_timer",
"csiphy0_timer_src",
"csiphy1",
"csiphy1_timer",
"csiphy1_timer_src",
"csiphy2",
"csiphy2_timer",
"csiphy2_timer_src",
"csiphy3",
"csiphy3_timer",
"csiphy3_timer_src",
"gcc_camera_ahb",
"gcc_camera_axi",
"slow_ahb_src",
"soc_ahb",
"vfe0_axi",
"vfe0",
"vfe0_cphy_rx",
"vfe0_src",
"vfe1_axi",
"vfe1",
"vfe1_cphy_rx",
"vfe1_src",
"vfe_lite",
"vfe_lite_cphy_rx",
"vfe_lite_src";
iommus = <&apps_smmu 0x0808 0x0>,
<&apps_smmu 0x0810 0x8>,
<&apps_smmu 0x0c08 0x0>,
<&apps_smmu 0x0c10 0x8>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
};
};
cci: cci@ac4a000 {
compatible = "qcom,sdm845-cci";
#address-cells = <1>;
#size-cells = <0>;
reg = <0 0x0ac4a000 0 0x4000>;
interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
power-domains = <&clock_camcc TITAN_TOP_GDSC>;
clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
<&clock_camcc CAM_CC_SOC_AHB_CLK>,
<&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
<&clock_camcc CAM_CC_CPAS_AHB_CLK>,
<&clock_camcc CAM_CC_CCI_CLK>,
<&clock_camcc CAM_CC_CCI_CLK_SRC>;
clock-names = "camnoc_axi",
"soc_ahb",
"slow_ahb_src",
"cpas_ahb",
"cci",
"cci_src";
assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
<&clock_camcc CAM_CC_CCI_CLK>;
assigned-clock-rates = <80000000>, <37500000>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cci0_default &cci1_default>;
pinctrl-1 = <&cci0_sleep &cci1_sleep>;
status = "disabled";
cci_i2c0: i2c-bus@0 {
reg = <0>;
clock-frequency = <1000000>;
#address-cells = <1>;
#size-cells = <0>;
};
cci_i2c1: i2c-bus@1 {
reg = <1>;
clock-frequency = <1000000>;
#address-cells = <1>;
#size-cells = <0>;
};
};
clock_camcc: clock-controller@ad00000 {
compatible = "qcom,sdm845-camcc";
reg = <0 0x0ad00000 0 0x10000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
dsi_opp_table: dsi-opp-table {
compatible = "operating-points-v2";
opp-19200000 {
opp-hz = /bits/ 64 <19200000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
opp-180000000 {
opp-hz = /bits/ 64 <180000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-275000000 {
opp-hz = /bits/ 64 <275000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-328580000 {
opp-hz = /bits/ 64 <328580000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-358000000 {
opp-hz = /bits/ 64 <358000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
mdss: mdss@ae00000 {
compatible = "qcom,sdm845-mdss";
reg = <0 0x0ae00000 0 0x1000>;
reg-names = "mdss";
power-domains = <&dispcc MDSS_GDSC>;
clocks = <&gcc GCC_DISP_AHB_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>;
clock-names = "iface", "core";
assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
assigned-clock-rates = <300000000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
interconnects = <&mmss_noc MASTER_MDP0 0 &mem_noc SLAVE_EBI1 0>,
<&mmss_noc MASTER_MDP1 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "mdp0-mem", "mdp1-mem";
iommus = <&apps_smmu 0x880 0x8>,
<&apps_smmu 0xc80 0x8>;
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
ranges;
mdss_mdp: mdp@ae01000 {
compatible = "qcom,sdm845-dpu";
reg = <0 0x0ae01000 0 0x8f000>,
<0 0x0aeb0000 0 0x2008>;
reg-names = "mdp", "vbif";
clocks = <&gcc GCC_DISP_AXI_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_AXI_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
assigned-clock-rates = <300000000>,
<19200000>;
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmhpd SDM845_CX>;
interrupt-parent = <&mdss>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dpu_intf1_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
port@1 {
reg = <1>;
dpu_intf2_out: endpoint {
remote-endpoint = <&dsi1_in>;
};
};
};
mdp_opp_table: mdp-opp-table {
compatible = "operating-points-v2";
opp-19200000 {
opp-hz = /bits/ 64 <19200000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
opp-171428571 {
opp-hz = /bits/ 64 <171428571>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-344000000 {
opp-hz = /bits/ 64 <344000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-430000000 {
opp-hz = /bits/ 64 <430000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
dsi0: dsi@ae94000 {
compatible = "qcom,mdss-dsi-ctrl";
reg = <0 0x0ae94000 0 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
<&dispcc DISP_CC_MDSS_PCLK0_CLK>,
<&dispcc DISP_CC_MDSS_ESC0_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_AXI_CLK>;
clock-names = "byte",
"byte_intf",
"pixel",
"core",
"iface",
"bus";
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd SDM845_CX>;
phys = <&dsi0_phy>;
phy-names = "dsi";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi0_in: endpoint {
remote-endpoint = <&dpu_intf1_out>;
};
};
port@1 {
reg = <1>;
dsi0_out: endpoint {
};
};
};
};
dsi0_phy: dsi-phy@ae94400 {
compatible = "qcom,dsi-phy-10nm";
reg = <0 0x0ae94400 0 0x200>,
<0 0x0ae94600 0 0x280>,
<0 0x0ae94a00 0 0x1e0>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
#clock-cells = <1>;
#phy-cells = <0>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "ref";
status = "disabled";
};
dsi1: dsi@ae96000 {
compatible = "qcom,mdss-dsi-ctrl";
reg = <0 0x0ae96000 0 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
<&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
<&dispcc DISP_CC_MDSS_PCLK1_CLK>,
<&dispcc DISP_CC_MDSS_ESC1_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_AXI_CLK>;
clock-names = "byte",
"byte_intf",
"pixel",
"core",
"iface",
"bus";
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd SDM845_CX>;
phys = <&dsi1_phy>;
phy-names = "dsi";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi1_in: endpoint {
remote-endpoint = <&dpu_intf2_out>;
};
};
port@1 {
reg = <1>;
dsi1_out: endpoint {
};
};
};
};
dsi1_phy: dsi-phy@ae96400 {
compatible = "qcom,dsi-phy-10nm";
reg = <0 0x0ae96400 0 0x200>,
<0 0x0ae96600 0 0x280>,
<0 0x0ae96a00 0 0x10e>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
#clock-cells = <1>;
#phy-cells = <0>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "ref";
status = "disabled";
};
};
gpu: gpu@5000000 {
compatible = "qcom,adreno-630.2", "qcom,adreno";
#stream-id-cells = <16>;
reg = <0 0x5000000 0 0x40000>, <0 0x509e000 0 0x10>;
reg-names = "kgsl_3d0_reg_memory", "cx_mem";
/*
* Look ma, no clocks! The GPU clocks and power are
* controlled entirely by the GMU
*/
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&adreno_smmu 0>;
operating-points-v2 = <&gpu_opp_table>;
qcom,gmu = <&gmu>;
interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>;
interconnect-names = "gfx-mem";
status = "disabled";
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-710000000 {
opp-hz = /bits/ 64 <710000000>;
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
opp-peak-kBps = <7216000>;
};
opp-675000000 {
opp-hz = /bits/ 64 <675000000>;
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
opp-peak-kBps = <7216000>;
};
opp-596000000 {
opp-hz = /bits/ 64 <596000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
opp-peak-kBps = <6220000>;
};
opp-520000000 {
opp-hz = /bits/ 64 <520000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
opp-peak-kBps = <6220000>;
};
opp-414000000 {
opp-hz = /bits/ 64 <414000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
opp-peak-kBps = <4068000>;
};
opp-342000000 {
opp-hz = /bits/ 64 <342000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
opp-peak-kBps = <2724000>;
};
opp-257000000 {
opp-hz = /bits/ 64 <257000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
opp-peak-kBps = <1648000>;
};
};
};
adreno_smmu: iommu@5040000 {
compatible = "qcom,sdm845-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
reg = <0 0x5040000 0 0x10000>;
#iommu-cells = <1>;
#global-interrupts = <2>;
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
<&gcc GCC_GPU_CFG_AHB_CLK>;
clock-names = "bus", "iface";
power-domains = <&gpucc GPU_CX_GDSC>;
};
gmu: gmu@506a000 {
compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
reg = <0 0x506a000 0 0x30000>,
<0 0xb280000 0 0x10000>,
<0 0xb480000 0 0x10000>;
reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hfi", "gmu";
clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
<&gpucc GPU_CC_CXO_CLK>,
<&gcc GCC_DDRSS_GPU_AXI_CLK>,
<&gcc GCC_GPU_MEMNOC_GFX_CLK>;
clock-names = "gmu", "cxo", "axi", "memnoc";
power-domains = <&gpucc GPU_CX_GDSC>,
<&gpucc GPU_GX_GDSC>;
power-domain-names = "cx", "gx";
iommus = <&adreno_smmu 5>;
operating-points-v2 = <&gmu_opp_table>;
status = "disabled";
gmu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
};
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
};
};
};
dispcc: clock-controller@af00000 {
compatible = "qcom,sdm845-dispcc";
reg = <0 0x0af00000 0 0x10000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
<&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
<&dsi0_phy 0>,
<&dsi0_phy 1>,
<&dsi1_phy 0>,
<&dsi1_phy 1>,
<0>,
<0>;
clock-names = "bi_tcxo",
"gcc_disp_gpll0_clk_src",
"gcc_disp_gpll0_div_clk_src",
"dsi0_phy_pll_out_byteclk",
"dsi0_phy_pll_out_dsiclk",
"dsi1_phy_pll_out_byteclk",
"dsi1_phy_pll_out_dsiclk",
"dp_link_clk_divsel_ten",
"dp_vco_divided_clk_src_mux";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
pdc_intc: interrupt-controller@b220000 {
compatible = "qcom,sdm845-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>;
qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupt-controller;
};
pdc_reset: reset-controller@b2e0000 {
compatible = "qcom,sdm845-pdc-global";
reg = <0 0x0b2e0000 0 0x20000>;
#reset-cells = <1>;
};
tsens0: thermal-sensor@c263000 {
compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
reg = <0 0x0c263000 0 0x1ff>, /* TM */
<0 0x0c222000 0 0x1ff>; /* SROT */
#qcom,sensors = <13>;
interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
tsens1: thermal-sensor@c265000 {
compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
reg = <0 0x0c265000 0 0x1ff>, /* TM */
<0 0x0c223000 0 0x1ff>; /* SROT */
#qcom,sensors = <8>;
interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
aoss_reset: reset-controller@c2a0000 {
compatible = "qcom,sdm845-aoss-cc";
reg = <0 0x0c2a0000 0 0x31000>;
#reset-cells = <1>;
};
aoss_qmp: power-controller@c300000 {
compatible = "qcom,sdm845-aoss-qmp";
reg = <0 0x0c300000 0 0x100000>;
interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 0>;
#clock-cells = <0>;
cx_cdev: cx {
#cooling-cells = <2>;
};
ebi_cdev: ebi {
#cooling-cells = <2>;
};
};
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0 0x0c440000 0 0x1100>,
<0 0x0c600000 0 0x2000000>,
<0 0x0e600000 0 0x100000>,
<0 0x0e700000 0 0xa0000>,
<0 0x0c40a000 0 0x26000>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
cell-index = <0>;
};
imem@146bf000 {
compatible = "simple-mfd";
reg = <0 0x146bf000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x146bf000 0x1000>;
pil-reloc@94c {
compatible = "qcom,pil-reloc-info";
reg = <0x94c 0xc8>;
};
};
apps_smmu: iommu@15000000 {
compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
reg = <0 0x15000000 0 0x80000>;
#iommu-cells = <2>;
#global-interrupts = <1>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
};
lpasscc: clock-controller@17014000 {
compatible = "qcom,sdm845-lpasscc";
reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>;
reg-names = "cc", "qdsp6ss";
#clock-cells = <1>;
status = "disabled";
};
gladiator_noc: interconnect@17900000 {
compatible = "qcom,sdm845-gladiator-noc";
reg = <0 0x17900000 0 0xd080>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
watchdog@17980000 {
compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt";
reg = <0 0x17980000 0 0x1000>;
clocks = <&sleep_clk>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
apss_shared: mailbox@17990000 {
compatible = "qcom,sdm845-apss-shared";
reg = <0 0x17990000 0 0x1000>;
#mbox-cells = <1>;
};
apps_rsc: rsc@179c0000 {
label = "apps_rsc";
compatible = "qcom,rpmh-rsc";
reg = <0 0x179c0000 0 0x10000>,
<0 0x179d0000 0 0x10000>,
<0 0x179e0000 0 0x10000>;
reg-names = "drv-0", "drv-1", "drv-2";
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
qcom,tcs-offset = <0xd00>;
qcom,drv-id = <2>;
qcom,tcs-config = <ACTIVE_TCS 2>,
<SLEEP_TCS 3>,
<WAKE_TCS 3>,
<CONTROL_TCS 1>;
apps_bcm_voter: bcm-voter {
compatible = "qcom,bcm-voter";
};
rpmhcc: clock-controller {
compatible = "qcom,sdm845-rpmh-clk";
#clock-cells = <1>;
clock-names = "xo";
clocks = <&xo_board>;
};
rpmhpd: power-controller {
compatible = "qcom,sdm845-rpmhpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmhpd_opp_table>;
rpmhpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmhpd_opp_ret: opp1 {
opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
};
rpmhpd_opp_min_svs: opp2 {
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
};
rpmhpd_opp_low_svs: opp3 {
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
};
rpmhpd_opp_svs: opp4 {
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
};
rpmhpd_opp_svs_l1: opp5 {
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
};
rpmhpd_opp_nom: opp6 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
};
rpmhpd_opp_nom_l1: opp7 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
};
rpmhpd_opp_nom_l2: opp8 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
};
rpmhpd_opp_turbo: opp9 {
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
};
rpmhpd_opp_turbo_l1: opp10 {
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
};
};
};
};
intc: interrupt-controller@17a00000 {
compatible = "arm,gic-v3";
#address-cells = <2>;
#size-cells = <2>;
ranges;
#interrupt-cells = <3>;
interrupt-controller;
reg = <0 0x17a00000 0 0x10000>, /* GICD */
<0 0x17a60000 0 0x100000>; /* GICR * 8 */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
msi-controller@17a40000 {
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
reg = <0 0x17a40000 0 0x20000>;
status = "disabled";
};
};
slimbam: dma-controller@17184000 {
compatible = "qcom,bam-v1.7.0";
qcom,controlled-remotely;
reg = <0 0x17184000 0 0x2a000>;
num-channels = <31>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <1>;
qcom,num-ees = <2>;
iommus = <&apps_smmu 0x1806 0x0>;
};
timer@17c90000 {
#address-cells = <2>;
#size-cells = <2>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0 0x17c90000 0 0x1000>;
frame@17ca0000 {
frame-number = <0>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg = <0 0x17ca0000 0 0x1000>,
<0 0x17cb0000 0 0x1000>;
};
frame@17cc0000 {
frame-number = <1>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
reg = <0 0x17cc0000 0 0x1000>;
status = "disabled";
};
frame@17cd0000 {
frame-number = <2>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0 0x17cd0000 0 0x1000>;
status = "disabled";
};
frame@17ce0000 {
frame-number = <3>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0 0x17ce0000 0 0x1000>;
status = "disabled";
};
frame@17cf0000 {
frame-number = <4>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0 0x17cf0000 0 0x1000>;
status = "disabled";
};
frame@17d00000 {
frame-number = <5>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0 0x17d00000 0 0x1000>;
status = "disabled";
};
frame@17d10000 {
frame-number = <6>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0 0x17d10000 0 0x1000>;
status = "disabled";
};
};
osm_l3: interconnect@17d41000 {
compatible = "qcom,sdm845-osm-l3";
reg = <0 0x17d41000 0 0x1400>;
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
clock-names = "xo", "alternate";
#interconnect-cells = <1>;
};
cpufreq_hw: cpufreq@17d43000 {
compatible = "qcom,cpufreq-hw";
reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
reg-names = "freq-domain0", "freq-domain1";
interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>;
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
clock-names = "xo", "alternate";
#freq-domain-cells = <1>;
};
wifi: wifi@18800000 {
compatible = "qcom,wcn3990-wifi";
status = "disabled";
reg = <0 0x18800000 0 0x800000>;
reg-names = "membase";
memory-region = <&wlan_msa_mem>;
clock-names = "cxo_ref_clk_pin";
clocks = <&rpmhcc RPMH_RF_CLK2>;
interrupts =
<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x0040 0x1>;
};
};
thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 1>;
trips {
cpu0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 2>;
trips {
cpu1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu1_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu1_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 3>;
trips {
cpu2_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu2_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu2_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 4>;
trips {
cpu3_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu3_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu3_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu4-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 7>;
trips {
cpu4_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu5-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 8>;
trips {
cpu5_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu6-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 9>;
trips {
cpu6_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu7-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 10>;
trips {
cpu7_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
aoss0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 0>;
trips {
aoss0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
cluster0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 5>;
trips {
cluster0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
cluster0_crit: cluster0_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cluster1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 6>;
trips {
cluster1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
cluster1_crit: cluster1_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
gpu-thermal-top {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 11>;
trips {
gpu1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
gpu-thermal-bottom {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 12>;
trips {
gpu2_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
aoss1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 0>;
trips {
aoss1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
q6-modem-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 1>;
trips {
q6_modem_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
mem-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 2>;
trips {
mem_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
wlan-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 3>;
trips {
wlan_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
q6-hvx-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 4>;
trips {
q6_hvx_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
camera-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 5>;
trips {
camera_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
video-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 6>;
trips {
video_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
modem-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 7>;
trips {
modem_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
};
};
Reference in New Issue View Git Blame Copy Permalink