linux/drivers/power/supply/qcom_battmgr.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
 * Copyright (c) 2022, Linaro Ltd
 */
#include <linux/auxiliary_bus.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of_device.h>
#include <linux/power_supply.h>
#include <linux/soc/qcom/pdr.h>
#include <linux/soc/qcom/pmic_glink.h>
#include <linux/math.h>
#include <linux/units.h>

#define BATTMGR_CHEMISTRY_LEN	4
#define BATTMGR_STRING_LEN	128

enum qcom_battmgr_variant {
	QCOM_BATTMGR_SM8350,
	QCOM_BATTMGR_SC8280XP,
};

#define BATTMGR_BAT_STATUS		0x1

#define BATTMGR_REQUEST_NOTIFICATION	0x4

#define BATTMGR_NOTIFICATION		0x7
#define NOTIF_BAT_PROPERTY		0x30
#define NOTIF_USB_PROPERTY		0x32
#define NOTIF_WLS_PROPERTY		0x34
#define NOTIF_BAT_INFO			0x81
#define NOTIF_BAT_STATUS		0x80

#define BATTMGR_BAT_INFO		0x9

#define BATTMGR_BAT_DISCHARGE_TIME	0xc

#define BATTMGR_BAT_CHARGE_TIME		0xd

#define BATTMGR_BAT_PROPERTY_GET	0x30
#define BATTMGR_BAT_PROPERTY_SET	0x31
#define BATT_STATUS			0
#define BATT_HEALTH			1
#define BATT_PRESENT			2
#define BATT_CHG_TYPE			3
#define BATT_CAPACITY			4
#define BATT_SOH			5
#define BATT_VOLT_OCV			6
#define BATT_VOLT_NOW			7
#define BATT_VOLT_MAX			8
#define BATT_CURR_NOW			9
#define BATT_CHG_CTRL_LIM		10
#define BATT_CHG_CTRL_LIM_MAX		11
#define BATT_TEMP			12
#define BATT_TECHNOLOGY			13
#define BATT_CHG_COUNTER		14
#define BATT_CYCLE_COUNT		15
#define BATT_CHG_FULL_DESIGN		16
#define BATT_CHG_FULL			17
#define BATT_MODEL_NAME			18
#define BATT_TTF_AVG			19
#define BATT_TTE_AVG			20
#define BATT_RESISTANCE			21
#define BATT_POWER_NOW			22
#define BATT_POWER_AVG			23

#define BATTMGR_USB_PROPERTY_GET	0x32
#define BATTMGR_USB_PROPERTY_SET	0x33
#define USB_ONLINE			0
#define USB_VOLT_NOW			1
#define USB_VOLT_MAX			2
#define USB_CURR_NOW			3
#define USB_CURR_MAX			4
#define USB_INPUT_CURR_LIMIT		5
#define USB_TYPE			6
#define USB_ADAP_TYPE			7
#define USB_MOISTURE_DET_EN		8
#define USB_MOISTURE_DET_STS		9

#define BATTMGR_WLS_PROPERTY_GET	0x34
#define BATTMGR_WLS_PROPERTY_SET	0x35
#define WLS_ONLINE			0
#define WLS_VOLT_NOW			1
#define WLS_VOLT_MAX			2
#define WLS_CURR_NOW			3
#define WLS_CURR_MAX			4
#define WLS_TYPE			5
#define WLS_BOOST_EN			6

struct qcom_battmgr_enable_request {
	struct pmic_glink_hdr hdr;
	__le32 battery_id;
	__le32 power_state;
	__le32 low_capacity;
	__le32 high_capacity;
};

struct qcom_battmgr_property_request {
	struct pmic_glink_hdr hdr;
	__le32 battery;
	__le32 property;
	__le32 value;
};

struct qcom_battmgr_update_request {
	struct pmic_glink_hdr hdr;
	u32 battery_id;
};

struct qcom_battmgr_charge_time_request {
	struct pmic_glink_hdr hdr;
	__le32 battery_id;
	__le32 percent;
	__le32 reserved;
};

struct qcom_battmgr_discharge_time_request {
	struct pmic_glink_hdr hdr;
	__le32 battery_id;
	__le32 rate; /* 0 for current rate */
	__le32 reserved;
};

struct qcom_battmgr_message {
	struct pmic_glink_hdr hdr;
	union {
		struct {
			__le32 property;
			__le32 value;
			__le32 result;
		} intval;
		struct {
			__le32 property;
			char model[BATTMGR_STRING_LEN];
		} strval;
		struct {
			/*
			 * 0: mWh
			 * 1: mAh
			 */
			__le32 power_unit;
			__le32 design_capacity;
			__le32 last_full_capacity;
			/*
			 * 0 nonrechargable
			 * 1 rechargable
			 */
			__le32 battery_tech;
			__le32 design_voltage; /* mV */
			__le32 capacity_low;
			__le32 capacity_warning;
			__le32 cycle_count;
			/* thousandth of persent */
			__le32 accuracy;
			__le32 max_sample_time_ms;
			__le32 min_sample_time_ms;
			__le32 max_average_interval_ms;
			__le32 min_average_interval_ms;
			/* granularity between low and warning */
			__le32 capacity_granularity1;
			/* granularity between warning and full */
			__le32 capacity_granularity2;
			/*
			 * 0: no
			 * 1: cold
			 * 2: hot
			 */
			__le32 swappable;
			__le32 capabilities;
			char model_number[BATTMGR_STRING_LEN];
			char serial_number[BATTMGR_STRING_LEN];
			char battery_type[BATTMGR_STRING_LEN];
			char oem_info[BATTMGR_STRING_LEN];
			char battery_chemistry[BATTMGR_CHEMISTRY_LEN];
			char uid[BATTMGR_STRING_LEN];
			__le32 critical_bias;
			u8 day;
			u8 month;
			__le16 year;
			__le32 battery_id;
		} info;
		struct {
			/*
			 * BIT(0) discharging
			 * BIT(1) charging
			 * BIT(2) critical low
			 */
			__le32 battery_state;
			/* mWh or mAh, based on info->power_unit */
			__le32 capacity;
			__le32 rate;
			/* mv */
			__le32 battery_voltage;
			/*
			 * BIT(0) power online
			 * BIT(1) discharging
			 * BIT(2) charging
			 * BIT(3) battery critical
			 */
			__le32 power_state;
			/*
			 * 1: AC
			 * 2: USB
			 * 3: Wireless
			 */
			__le32 charging_source;
			__le32 temperature;
		} status;
		__le32 time;
		__le32 notification;
	};
};

#define BATTMGR_CHARGING_SOURCE_AC	1
#define BATTMGR_CHARGING_SOURCE_USB	2
#define BATTMGR_CHARGING_SOURCE_WIRELESS 3

enum qcom_battmgr_unit {
	QCOM_BATTMGR_UNIT_mWh = 0,
	QCOM_BATTMGR_UNIT_mAh = 1
};

struct qcom_battmgr_info {
	bool valid;

	bool present;
	unsigned int charge_type;
	unsigned int design_capacity;
	unsigned int last_full_capacity;
	unsigned int voltage_max_design;
	unsigned int voltage_max;
	unsigned int capacity_low;
	unsigned int capacity_warning;
	unsigned int cycle_count;
	unsigned int charge_count;
	char model_number[BATTMGR_STRING_LEN];
	char serial_number[BATTMGR_STRING_LEN];
	char oem_info[BATTMGR_STRING_LEN];
	unsigned char technology;
	unsigned char day;
	unsigned char month;
	unsigned short year;
};

struct qcom_battmgr_status {
	unsigned int status;
	unsigned int health;
	unsigned int capacity;
	unsigned int percent;
	int current_now;
	int power_now;
	unsigned int voltage_now;
	unsigned int voltage_ocv;
	unsigned int temperature;

	unsigned int discharge_time;
	unsigned int charge_time;
};

struct qcom_battmgr_ac {
	bool online;
};

struct qcom_battmgr_usb {
	bool online;
	unsigned int voltage_now;
	unsigned int voltage_max;
	unsigned int current_now;
	unsigned int current_max;
	unsigned int current_limit;
	unsigned int usb_type;
};

struct qcom_battmgr_wireless {
	bool online;
	unsigned int voltage_now;
	unsigned int voltage_max;
	unsigned int current_now;
	unsigned int current_max;
};

struct qcom_battmgr {
	struct device *dev;
	struct pmic_glink_client *client;

	enum qcom_battmgr_variant variant;

	struct power_supply *ac_psy;
	struct power_supply *bat_psy;
	struct power_supply *usb_psy;
	struct power_supply *wls_psy;

	enum qcom_battmgr_unit unit;

	int error;
	struct completion ack;

	bool service_up;

	struct qcom_battmgr_info info;
	struct qcom_battmgr_status status;
	struct qcom_battmgr_ac ac;
	struct qcom_battmgr_usb usb;
	struct qcom_battmgr_wireless wireless;

	struct work_struct enable_work;

	/*
	 * @lock is used to prevent concurrent power supply requests to the
	 * firmware, as it then stops responding.
	 */
	struct mutex lock;
};

static int qcom_battmgr_request(struct qcom_battmgr *battmgr, void *data, size_t len)
{
	unsigned long left;
	int ret;

	reinit_completion(&battmgr->ack);

	battmgr->error = 0;

	ret = pmic_glink_send(battmgr->client, data, len);
	if (ret < 0)
		return ret;

	left = wait_for_completion_timeout(&battmgr->ack, HZ);
	if (!left)
		return -ETIMEDOUT;

	return battmgr->error;
}

static int qcom_battmgr_request_property(struct qcom_battmgr *battmgr, int opcode,
					 int property, u32 value)
{
	struct qcom_battmgr_property_request request = {
		.hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR),
		.hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP),
		.hdr.opcode = cpu_to_le32(opcode),
		.battery = cpu_to_le32(0),
		.property = cpu_to_le32(property),
		.value = cpu_to_le32(value),
	};

	return qcom_battmgr_request(battmgr, &request, sizeof(request));
}

static int qcom_battmgr_update_status(struct qcom_battmgr *battmgr)
{
	struct qcom_battmgr_update_request request = {
		.hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR),
		.hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP),
		.hdr.opcode = cpu_to_le32(BATTMGR_BAT_STATUS),
		.battery_id = cpu_to_le32(0),
	};

	return qcom_battmgr_request(battmgr, &request, sizeof(request));
}

static int qcom_battmgr_update_info(struct qcom_battmgr *battmgr)
{
	struct qcom_battmgr_update_request request = {
		.hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR),
		.hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP),
		.hdr.opcode = cpu_to_le32(BATTMGR_BAT_INFO),
		.battery_id = cpu_to_le32(0),
	};

	return qcom_battmgr_request(battmgr, &request, sizeof(request));
}

static int qcom_battmgr_update_charge_time(struct qcom_battmgr *battmgr)
{
	struct qcom_battmgr_charge_time_request request = {
		.hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR),
		.hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP),
		.hdr.opcode = cpu_to_le32(BATTMGR_BAT_CHARGE_TIME),
		.battery_id = cpu_to_le32(0),
		.percent = cpu_to_le32(100),
	};

	return qcom_battmgr_request(battmgr, &request, sizeof(request));
}

static int qcom_battmgr_update_discharge_time(struct qcom_battmgr *battmgr)
{
	struct qcom_battmgr_discharge_time_request request = {
		.hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR),
		.hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP),
		.hdr.opcode = cpu_to_le32(BATTMGR_BAT_DISCHARGE_TIME),
		.battery_id = cpu_to_le32(0),
		.rate = cpu_to_le32(0),
	};

	return qcom_battmgr_request(battmgr, &request, sizeof(request));
}

static const u8 sm8350_bat_prop_map[] = {
	[POWER_SUPPLY_PROP_STATUS] = BATT_STATUS,
	[POWER_SUPPLY_PROP_HEALTH] = BATT_HEALTH,
	[POWER_SUPPLY_PROP_PRESENT] = BATT_PRESENT,
	[POWER_SUPPLY_PROP_CHARGE_TYPE] = BATT_CHG_TYPE,
	[POWER_SUPPLY_PROP_CAPACITY] = BATT_CAPACITY,
	[POWER_SUPPLY_PROP_VOLTAGE_OCV] = BATT_VOLT_OCV,
	[POWER_SUPPLY_PROP_VOLTAGE_NOW] = BATT_VOLT_NOW,
	[POWER_SUPPLY_PROP_VOLTAGE_MAX] = BATT_VOLT_MAX,
	[POWER_SUPPLY_PROP_CURRENT_NOW] = BATT_CURR_NOW,
	[POWER_SUPPLY_PROP_TEMP] = BATT_TEMP,
	[POWER_SUPPLY_PROP_TECHNOLOGY] = BATT_TECHNOLOGY,
	[POWER_SUPPLY_PROP_CHARGE_COUNTER] =  BATT_CHG_COUNTER,
	[POWER_SUPPLY_PROP_CYCLE_COUNT] = BATT_CYCLE_COUNT,
	[POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN] =  BATT_CHG_FULL_DESIGN,
	[POWER_SUPPLY_PROP_CHARGE_FULL] = BATT_CHG_FULL,
	[POWER_SUPPLY_PROP_MODEL_NAME] = BATT_MODEL_NAME,
	[POWER_SUPPLY_PROP_TIME_TO_FULL_AVG] = BATT_TTF_AVG,
	[POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG] = BATT_TTE_AVG,
	[POWER_SUPPLY_PROP_POWER_NOW] = BATT_POWER_NOW,
};

static int qcom_battmgr_bat_sm8350_update(struct qcom_battmgr *battmgr,
					  enum power_supply_property psp)
{
	unsigned int prop;
	int ret;

	if (psp >= ARRAY_SIZE(sm8350_bat_prop_map))
		return -EINVAL;

	prop = sm8350_bat_prop_map[psp];

	mutex_lock(&battmgr->lock);
	ret = qcom_battmgr_request_property(battmgr, BATTMGR_BAT_PROPERTY_GET, prop, 0);
	mutex_unlock(&battmgr->lock);

	return ret;
}

static int qcom_battmgr_bat_sc8280xp_update(struct qcom_battmgr *battmgr,
					    enum power_supply_property psp)
{
	int ret;

	mutex_lock(&battmgr->lock);

	if (!battmgr->info.valid) {
		ret = qcom_battmgr_update_info(battmgr);
		if (ret < 0)
			goto out_unlock;
		battmgr->info.valid = true;
	}

	ret = qcom_battmgr_update_status(battmgr);
	if (ret < 0)
		goto out_unlock;

	if (psp == POWER_SUPPLY_PROP_TIME_TO_FULL_AVG) {
		ret = qcom_battmgr_update_charge_time(battmgr);
		if (ret < 0) {
			ret = -ENODATA;
			goto out_unlock;
		}
	}

	if (psp == POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG) {
		ret = qcom_battmgr_update_discharge_time(battmgr);
		if (ret < 0) {
			ret = -ENODATA;
			goto out_unlock;
		}
	}

out_unlock:
	mutex_unlock(&battmgr->lock);
	return ret;
}

static int qcom_battmgr_bat_get_property(struct power_supply *psy,
					 enum power_supply_property psp,
					 union power_supply_propval *val)
{
	struct qcom_battmgr *battmgr = power_supply_get_drvdata(psy);
	enum qcom_battmgr_unit unit = battmgr->unit;
	int ret;

	if (!battmgr->service_up)
		return -ENODEV;

	if (battmgr->variant == QCOM_BATTMGR_SC8280XP)
		ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp);
	else
		ret = qcom_battmgr_bat_sm8350_update(battmgr, psp);
	if (ret < 0)
		return ret;

	switch (psp) {
	case POWER_SUPPLY_PROP_STATUS:
		val->intval = battmgr->status.status;
		break;
	case POWER_SUPPLY_PROP_CHARGE_TYPE:
		val->intval = battmgr->info.charge_type;
		break;
	case POWER_SUPPLY_PROP_HEALTH:
		val->intval = battmgr->status.health;
		break;
	case POWER_SUPPLY_PROP_PRESENT:
		val->intval = battmgr->info.present;
		break;
	case POWER_SUPPLY_PROP_TECHNOLOGY:
		val->intval = battmgr->info.technology;
		break;
	case POWER_SUPPLY_PROP_CYCLE_COUNT:
		val->intval = battmgr->info.cycle_count;
		break;
	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
		val->intval = battmgr->info.voltage_max_design;
		break;
	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
		val->intval = battmgr->info.voltage_max;
		break;
	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
		val->intval = battmgr->status.voltage_now;
		break;
	case POWER_SUPPLY_PROP_VOLTAGE_OCV:
		val->intval = battmgr->status.voltage_ocv;
		break;
	case POWER_SUPPLY_PROP_CURRENT_NOW:
		val->intval = battmgr->status.current_now;
		break;
	case POWER_SUPPLY_PROP_POWER_NOW:
		val->intval = battmgr->status.power_now;
		break;
	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
		if (unit != QCOM_BATTMGR_UNIT_mAh)
			return -ENODATA;
		val->intval = battmgr->info.design_capacity;
		break;
	case POWER_SUPPLY_PROP_CHARGE_FULL:
		if (unit != QCOM_BATTMGR_UNIT_mAh)
			return -ENODATA;
		val->intval = battmgr->info.last_full_capacity;
		break;
	case POWER_SUPPLY_PROP_CHARGE_EMPTY:
		if (unit != QCOM_BATTMGR_UNIT_mAh)
			return -ENODATA;
		val->intval = battmgr->info.capacity_low;
		break;
	case POWER_SUPPLY_PROP_CHARGE_NOW:
		if (unit != QCOM_BATTMGR_UNIT_mAh)
			return -ENODATA;
		val->intval = battmgr->status.capacity;
		break;
	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
		val->intval = battmgr->info.charge_count;
		break;
	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
		if (unit != QCOM_BATTMGR_UNIT_mWh)
			return -ENODATA;
		val->intval = battmgr->info.design_capacity;
		break;
	case POWER_SUPPLY_PROP_ENERGY_FULL:
		if (unit != QCOM_BATTMGR_UNIT_mWh)
			return -ENODATA;
		val->intval = battmgr->info.last_full_capacity;
		break;
	case POWER_SUPPLY_PROP_ENERGY_EMPTY:
		if (unit != QCOM_BATTMGR_UNIT_mWh)
			return -ENODATA;
		val->intval = battmgr->info.capacity_low;
		break;
	case POWER_SUPPLY_PROP_ENERGY_NOW:
		if (unit != QCOM_BATTMGR_UNIT_mWh)
			return -ENODATA;
		val->intval = battmgr->status.capacity;
		break;
	case POWER_SUPPLY_PROP_CAPACITY:
		val->intval = battmgr->status.percent;
		break;
	case POWER_SUPPLY_PROP_TEMP:
		val->intval = battmgr->status.temperature;
		break;
	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
		val->intval = battmgr->status.discharge_time;
		break;
	case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
		val->intval = battmgr->status.charge_time;
		break;
	case POWER_SUPPLY_PROP_MANUFACTURE_YEAR:
		val->intval = battmgr->info.year;
		break;
	case POWER_SUPPLY_PROP_MANUFACTURE_MONTH:
		val->intval = battmgr->info.month;
		break;
	case POWER_SUPPLY_PROP_MANUFACTURE_DAY:
		val->intval = battmgr->info.day;
		break;
	case POWER_SUPPLY_PROP_MODEL_NAME:
		val->strval = battmgr->info.model_number;
		break;
	case POWER_SUPPLY_PROP_MANUFACTURER:
		val->strval = battmgr->info.oem_info;
		break;
	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
		val->strval = battmgr->info.serial_number;
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static const enum power_supply_property sc8280xp_bat_props[] = {
	POWER_SUPPLY_PROP_STATUS,
	POWER_SUPPLY_PROP_PRESENT,
	POWER_SUPPLY_PROP_TECHNOLOGY,
	POWER_SUPPLY_PROP_CYCLE_COUNT,
	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
	POWER_SUPPLY_PROP_VOLTAGE_NOW,
	POWER_SUPPLY_PROP_POWER_NOW,
	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
	POWER_SUPPLY_PROP_CHARGE_FULL,
	POWER_SUPPLY_PROP_CHARGE_EMPTY,
	POWER_SUPPLY_PROP_CHARGE_NOW,
	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
	POWER_SUPPLY_PROP_ENERGY_FULL,
	POWER_SUPPLY_PROP_ENERGY_EMPTY,
	POWER_SUPPLY_PROP_ENERGY_NOW,
	POWER_SUPPLY_PROP_TEMP,
	POWER_SUPPLY_PROP_MANUFACTURE_YEAR,
	POWER_SUPPLY_PROP_MANUFACTURE_MONTH,
	POWER_SUPPLY_PROP_MANUFACTURE_DAY,
	POWER_SUPPLY_PROP_MODEL_NAME,
	POWER_SUPPLY_PROP_MANUFACTURER,
	POWER_SUPPLY_PROP_SERIAL_NUMBER,
};

static const struct power_supply_desc sc8280xp_bat_psy_desc = {
	.name = "qcom-battmgr-bat",
	.type = POWER_SUPPLY_TYPE_BATTERY,
	.properties = sc8280xp_bat_props,
	.num_properties = ARRAY_SIZE(sc8280xp_bat_props),
	.get_property = qcom_battmgr_bat_get_property,
};

static const enum power_supply_property sm8350_bat_props[] = {
	POWER_SUPPLY_PROP_STATUS,
	POWER_SUPPLY_PROP_HEALTH,
	POWER_SUPPLY_PROP_PRESENT,
	POWER_SUPPLY_PROP_CHARGE_TYPE,
	POWER_SUPPLY_PROP_CAPACITY,
	POWER_SUPPLY_PROP_VOLTAGE_OCV,
	POWER_SUPPLY_PROP_VOLTAGE_NOW,
	POWER_SUPPLY_PROP_VOLTAGE_MAX,
	POWER_SUPPLY_PROP_CURRENT_NOW,
	POWER_SUPPLY_PROP_TEMP,
	POWER_SUPPLY_PROP_TECHNOLOGY,
	POWER_SUPPLY_PROP_CHARGE_COUNTER,
	POWER_SUPPLY_PROP_CYCLE_COUNT,
	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
	POWER_SUPPLY_PROP_CHARGE_FULL,
	POWER_SUPPLY_PROP_MODEL_NAME,
	POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
	POWER_SUPPLY_PROP_POWER_NOW,
};

static const struct power_supply_desc sm8350_bat_psy_desc = {
	.name = "qcom-battmgr-bat",
	.type = POWER_SUPPLY_TYPE_BATTERY,
	.properties = sm8350_bat_props,
	.num_properties = ARRAY_SIZE(sm8350_bat_props),
	.get_property = qcom_battmgr_bat_get_property,
};

static int qcom_battmgr_ac_get_property(struct power_supply *psy,
					enum power_supply_property psp,
					union power_supply_propval *val)
{
	struct qcom_battmgr *battmgr = power_supply_get_drvdata(psy);
	int ret;

	if (!battmgr->service_up)
		return -ENODEV;

	ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp);
	if (ret)
		return ret;

	switch (psp) {
	case POWER_SUPPLY_PROP_ONLINE:
		val->intval = battmgr->ac.online;
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static const enum power_supply_property sc8280xp_ac_props[] = {
	POWER_SUPPLY_PROP_ONLINE,
};

static const struct power_supply_desc sc8280xp_ac_psy_desc = {
	.name = "qcom-battmgr-ac",
	.type = POWER_SUPPLY_TYPE_MAINS,
	.properties = sc8280xp_ac_props,
	.num_properties = ARRAY_SIZE(sc8280xp_ac_props),
	.get_property = qcom_battmgr_ac_get_property,
};

static const u8 sm8350_usb_prop_map[] = {
	[POWER_SUPPLY_PROP_ONLINE] = USB_ONLINE,
	[POWER_SUPPLY_PROP_VOLTAGE_NOW] = USB_VOLT_NOW,
	[POWER_SUPPLY_PROP_VOLTAGE_MAX] = USB_VOLT_MAX,
	[POWER_SUPPLY_PROP_CURRENT_NOW] = USB_CURR_NOW,
	[POWER_SUPPLY_PROP_CURRENT_MAX] = USB_CURR_MAX,
	[POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT] = USB_INPUT_CURR_LIMIT,
	[POWER_SUPPLY_PROP_USB_TYPE] = USB_TYPE,
};

static int qcom_battmgr_usb_sm8350_update(struct qcom_battmgr *battmgr,
					  enum power_supply_property psp)
{
	unsigned int prop;
	int ret;

	if (psp >= ARRAY_SIZE(sm8350_usb_prop_map))
		return -EINVAL;

	prop = sm8350_usb_prop_map[psp];

	mutex_lock(&battmgr->lock);
	ret = qcom_battmgr_request_property(battmgr, BATTMGR_USB_PROPERTY_GET, prop, 0);
	mutex_unlock(&battmgr->lock);

	return ret;
}

static int qcom_battmgr_usb_get_property(struct power_supply *psy,
					 enum power_supply_property psp,
					 union power_supply_propval *val)
{
	struct qcom_battmgr *battmgr = power_supply_get_drvdata(psy);
	int ret;

	if (!battmgr->service_up)
		return -ENODEV;

	if (battmgr->variant == QCOM_BATTMGR_SC8280XP)
		ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp);
	else
		ret = qcom_battmgr_usb_sm8350_update(battmgr, psp);
	if (ret)
		return ret;

	switch (psp) {
	case POWER_SUPPLY_PROP_ONLINE:
		val->intval = battmgr->usb.online;
		break;
	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
		val->intval = battmgr->usb.voltage_now;
		break;
	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
		val->intval = battmgr->usb.voltage_max;
		break;
	case POWER_SUPPLY_PROP_CURRENT_NOW:
		val->intval = battmgr->usb.current_now;
		break;
	case POWER_SUPPLY_PROP_CURRENT_MAX:
		val->intval = battmgr->usb.current_max;
		break;
	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
		val->intval = battmgr->usb.current_limit;
		break;
	case POWER_SUPPLY_PROP_USB_TYPE:
		val->intval = battmgr->usb.usb_type;
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static const enum power_supply_usb_type usb_psy_supported_types[] = {
	POWER_SUPPLY_USB_TYPE_UNKNOWN,
	POWER_SUPPLY_USB_TYPE_SDP,
	POWER_SUPPLY_USB_TYPE_DCP,
	POWER_SUPPLY_USB_TYPE_CDP,
	POWER_SUPPLY_USB_TYPE_ACA,
	POWER_SUPPLY_USB_TYPE_C,
	POWER_SUPPLY_USB_TYPE_PD,
	POWER_SUPPLY_USB_TYPE_PD_DRP,
	POWER_SUPPLY_USB_TYPE_PD_PPS,
	POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID,
};

static const enum power_supply_property sc8280xp_usb_props[] = {
	POWER_SUPPLY_PROP_ONLINE,
};

static const struct power_supply_desc sc8280xp_usb_psy_desc = {
	.name = "qcom-battmgr-usb",
	.type = POWER_SUPPLY_TYPE_USB,
	.properties = sc8280xp_usb_props,
	.num_properties = ARRAY_SIZE(sc8280xp_usb_props),
	.get_property = qcom_battmgr_usb_get_property,
	.usb_types = usb_psy_supported_types,
	.num_usb_types = ARRAY_SIZE(usb_psy_supported_types),
};

static const enum power_supply_property sm8350_usb_props[] = {
	POWER_SUPPLY_PROP_ONLINE,
	POWER_SUPPLY_PROP_VOLTAGE_NOW,
	POWER_SUPPLY_PROP_VOLTAGE_MAX,
	POWER_SUPPLY_PROP_CURRENT_NOW,
	POWER_SUPPLY_PROP_CURRENT_MAX,
	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
	POWER_SUPPLY_PROP_USB_TYPE,
};

static const struct power_supply_desc sm8350_usb_psy_desc = {
	.name = "qcom-battmgr-usb",
	.type = POWER_SUPPLY_TYPE_USB,
	.properties = sm8350_usb_props,
	.num_properties = ARRAY_SIZE(sm8350_usb_props),
	.get_property = qcom_battmgr_usb_get_property,
	.usb_types = usb_psy_supported_types,
	.num_usb_types = ARRAY_SIZE(usb_psy_supported_types),
};

static const u8 sm8350_wls_prop_map[] = {
	[POWER_SUPPLY_PROP_ONLINE] = WLS_ONLINE,
	[POWER_SUPPLY_PROP_VOLTAGE_NOW] = WLS_VOLT_NOW,
	[POWER_SUPPLY_PROP_VOLTAGE_MAX] = WLS_VOLT_MAX,
	[POWER_SUPPLY_PROP_CURRENT_NOW] = WLS_CURR_NOW,
	[POWER_SUPPLY_PROP_CURRENT_MAX] = WLS_CURR_MAX,
};

static int qcom_battmgr_wls_sm8350_update(struct qcom_battmgr *battmgr,
					  enum power_supply_property psp)
{
	unsigned int prop;
	int ret;

	if (psp >= ARRAY_SIZE(sm8350_wls_prop_map))
		return -EINVAL;

	prop = sm8350_wls_prop_map[psp];

	mutex_lock(&battmgr->lock);
	ret = qcom_battmgr_request_property(battmgr, BATTMGR_WLS_PROPERTY_GET, prop, 0);
	mutex_unlock(&battmgr->lock);

	return ret;
}

static int qcom_battmgr_wls_get_property(struct power_supply *psy,
					 enum power_supply_property psp,
					 union power_supply_propval *val)
{
	struct qcom_battmgr *battmgr = power_supply_get_drvdata(psy);
	int ret;

	if (!battmgr->service_up)
		return -ENODEV;

	if (battmgr->variant == QCOM_BATTMGR_SC8280XP)
		ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp);
	else
		ret = qcom_battmgr_wls_sm8350_update(battmgr, psp);
	if (ret < 0)
		return ret;

	switch (psp) {
	case POWER_SUPPLY_PROP_ONLINE:
		val->intval = battmgr->wireless.online;
		break;
	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
		val->intval = battmgr->wireless.voltage_now;
		break;
	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
		val->intval = battmgr->wireless.voltage_max;
		break;
	case POWER_SUPPLY_PROP_CURRENT_NOW:
		val->intval = battmgr->wireless.current_now;
		break;
	case POWER_SUPPLY_PROP_CURRENT_MAX:
		val->intval = battmgr->wireless.current_max;
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static const enum power_supply_property sc8280xp_wls_props[] = {
	POWER_SUPPLY_PROP_ONLINE,
};

static const struct power_supply_desc sc8280xp_wls_psy_desc = {
	.name = "qcom-battmgr-wls",
	.type = POWER_SUPPLY_TYPE_WIRELESS,
	.properties = sc8280xp_wls_props,
	.num_properties = ARRAY_SIZE(sc8280xp_wls_props),
	.get_property = qcom_battmgr_wls_get_property,
};

static const enum power_supply_property sm8350_wls_props[] = {
	POWER_SUPPLY_PROP_ONLINE,
	POWER_SUPPLY_PROP_VOLTAGE_NOW,
	POWER_SUPPLY_PROP_VOLTAGE_MAX,
	POWER_SUPPLY_PROP_CURRENT_NOW,
	POWER_SUPPLY_PROP_CURRENT_MAX,
};

static const struct power_supply_desc sm8350_wls_psy_desc = {
	.name = "qcom-battmgr-wls",
	.type = POWER_SUPPLY_TYPE_WIRELESS,
	.properties = sm8350_wls_props,
	.num_properties = ARRAY_SIZE(sm8350_wls_props),
	.get_property = qcom_battmgr_wls_get_property,
};

static void qcom_battmgr_notification(struct qcom_battmgr *battmgr,
				      const struct qcom_battmgr_message *msg,
				      int len)
{
	size_t payload_len = len - sizeof(struct pmic_glink_hdr);
	unsigned int notification;

	if (payload_len != sizeof(msg->notification)) {
		dev_warn(battmgr->dev, "ignoring notification with invalid length\n");
		return;
	}

	notification = le32_to_cpu(msg->notification);
	switch (notification) {
	case NOTIF_BAT_INFO:
		battmgr->info.valid = false;
		fallthrough;
	case NOTIF_BAT_STATUS:
	case NOTIF_BAT_PROPERTY:
		power_supply_changed(battmgr->bat_psy);
		break;
	case NOTIF_USB_PROPERTY:
		power_supply_changed(battmgr->usb_psy);
		break;
	case NOTIF_WLS_PROPERTY:
		power_supply_changed(battmgr->wls_psy);
		break;
	default:
		dev_err(battmgr->dev, "unknown notification: %#x\n", notification);
		break;
	}
}

static void qcom_battmgr_sc8280xp_strcpy(char *dest, const char *src)
{
	size_t len = src[0];

	/* Some firmware versions return Pascal-style strings */
	if (len < BATTMGR_STRING_LEN && len == strnlen(src + 1, BATTMGR_STRING_LEN - 1)) {
		memcpy(dest, src + 1, len);
		dest[len] = '\0';
	} else {
		memcpy(dest, src, BATTMGR_STRING_LEN);
	}
}

static unsigned int qcom_battmgr_sc8280xp_parse_technology(const char *chemistry)
{
	if (!strncmp(chemistry, "LIO", BATTMGR_CHEMISTRY_LEN))
		return POWER_SUPPLY_TECHNOLOGY_LION;

	pr_err("Unknown battery technology '%s'\n", chemistry);
	return POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
}

static unsigned int qcom_battmgr_sc8280xp_convert_temp(unsigned int temperature)
{
	return DIV_ROUND_CLOSEST(temperature, 10);
}

static void qcom_battmgr_sc8280xp_callback(struct qcom_battmgr *battmgr,
					   const struct qcom_battmgr_message *resp,
					   size_t len)
{
	unsigned int opcode = le32_to_cpu(resp->hdr.opcode);
	unsigned int source;
	unsigned int state;
	size_t payload_len = len - sizeof(struct pmic_glink_hdr);

	if (payload_len < sizeof(__le32)) {
		dev_warn(battmgr->dev, "invalid payload length for %#x: %zd\n",
			 opcode, len);
		return;
	}

	switch (opcode) {
	case BATTMGR_REQUEST_NOTIFICATION:
		battmgr->error = 0;
		break;
	case BATTMGR_BAT_INFO:
		if (payload_len != sizeof(resp->info)) {
			dev_warn(battmgr->dev,
				 "invalid payload length for battery information request: %zd\n",
				 payload_len);
			battmgr->error = -ENODATA;
			return;
		}

		battmgr->unit = le32_to_cpu(resp->info.power_unit);

		battmgr->info.present = true;
		battmgr->info.design_capacity = le32_to_cpu(resp->info.design_capacity) * 1000;
		battmgr->info.last_full_capacity = le32_to_cpu(resp->info.last_full_capacity) * 1000;
		battmgr->info.voltage_max_design = le32_to_cpu(resp->info.design_voltage) * 1000;
		battmgr->info.capacity_low = le32_to_cpu(resp->info.capacity_low) * 1000;
		battmgr->info.cycle_count = le32_to_cpu(resp->info.cycle_count);
		qcom_battmgr_sc8280xp_strcpy(battmgr->info.model_number, resp->info.model_number);
		qcom_battmgr_sc8280xp_strcpy(battmgr->info.serial_number, resp->info.serial_number);
		battmgr->info.technology = qcom_battmgr_sc8280xp_parse_technology(resp->info.battery_chemistry);
		qcom_battmgr_sc8280xp_strcpy(battmgr->info.oem_info, resp->info.oem_info);
		battmgr->info.day = resp->info.day;
		battmgr->info.month = resp->info.month;
		battmgr->info.year = le16_to_cpu(resp->info.year);
		break;
	case BATTMGR_BAT_STATUS:
		if (payload_len != sizeof(resp->status)) {
			dev_warn(battmgr->dev,
				 "invalid payload length for battery status request: %zd\n",
				 payload_len);
			battmgr->error = -ENODATA;
			return;
		}

		state = le32_to_cpu(resp->status.battery_state);
		if (state & BIT(0))
			battmgr->status.status = POWER_SUPPLY_STATUS_DISCHARGING;
		else if (state & BIT(1))
			battmgr->status.status = POWER_SUPPLY_STATUS_CHARGING;
		else
			battmgr->status.status = POWER_SUPPLY_STATUS_NOT_CHARGING;

		battmgr->status.capacity = le32_to_cpu(resp->status.capacity) * 1000;
		battmgr->status.power_now = le32_to_cpu(resp->status.rate) * 1000;
		battmgr->status.voltage_now = le32_to_cpu(resp->status.battery_voltage) * 1000;
		battmgr->status.temperature = qcom_battmgr_sc8280xp_convert_temp(le32_to_cpu(resp->status.temperature));

		source = le32_to_cpu(resp->status.charging_source);
		battmgr->ac.online = source == BATTMGR_CHARGING_SOURCE_AC;
		battmgr->usb.online = source == BATTMGR_CHARGING_SOURCE_USB;
		battmgr->wireless.online = source == BATTMGR_CHARGING_SOURCE_WIRELESS;
		break;
	case BATTMGR_BAT_DISCHARGE_TIME:
		battmgr->status.discharge_time = le32_to_cpu(resp->time);
		break;
	case BATTMGR_BAT_CHARGE_TIME:
		battmgr->status.charge_time = le32_to_cpu(resp->time);
		break;
	default:
		dev_warn(battmgr->dev, "unknown message %#x\n", opcode);
		break;
	}

	complete(&battmgr->ack);
}

static void qcom_battmgr_sm8350_callback(struct qcom_battmgr *battmgr,
					 const struct qcom_battmgr_message *resp,
					 size_t len)
{
	unsigned int property;
	unsigned int opcode = le32_to_cpu(resp->hdr.opcode);
	size_t payload_len = len - sizeof(struct pmic_glink_hdr);
	unsigned int val;

	if (payload_len < sizeof(__le32)) {
		dev_warn(battmgr->dev, "invalid payload length for %#x: %zd\n",
			 opcode, len);
		return;
	}

	switch (opcode) {
	case BATTMGR_BAT_PROPERTY_GET:
		property = le32_to_cpu(resp->intval.property);
		if (property == BATT_MODEL_NAME) {
			if (payload_len != sizeof(resp->strval)) {
				dev_warn(battmgr->dev,
					 "invalid payload length for BATT_MODEL_NAME request: %zd\n",
					 payload_len);
				battmgr->error = -ENODATA;
				return;
			}
		} else {
			if (payload_len != sizeof(resp->intval)) {
				dev_warn(battmgr->dev,
					 "invalid payload length for %#x request: %zd\n",
					 property, payload_len);
				battmgr->error = -ENODATA;
				return;
			}

			battmgr->error = le32_to_cpu(resp->intval.result);
			if (battmgr->error)
				goto out_complete;
		}

		switch (property) {
		case BATT_STATUS:
			battmgr->status.status = le32_to_cpu(resp->intval.value);
			break;
		case BATT_HEALTH:
			battmgr->status.health = le32_to_cpu(resp->intval.value);
			break;
		case BATT_PRESENT:
			battmgr->info.present = le32_to_cpu(resp->intval.value);
			break;
		case BATT_CHG_TYPE:
			battmgr->info.charge_type = le32_to_cpu(resp->intval.value);
			break;
		case BATT_CAPACITY:
			battmgr->status.percent = le32_to_cpu(resp->intval.value) / 100;
			break;
		case BATT_VOLT_OCV:
			battmgr->status.voltage_ocv = le32_to_cpu(resp->intval.value);
			break;
		case BATT_VOLT_NOW:
			battmgr->status.voltage_now = le32_to_cpu(resp->intval.value);
			break;
		case BATT_VOLT_MAX:
			battmgr->info.voltage_max = le32_to_cpu(resp->intval.value);
			break;
		case BATT_CURR_NOW:
			battmgr->status.current_now = le32_to_cpu(resp->intval.value);
			break;
		case BATT_TEMP:
			val = le32_to_cpu(resp->intval.value);
			battmgr->status.temperature = DIV_ROUND_CLOSEST(val, 10);
			break;
		case BATT_TECHNOLOGY:
			battmgr->info.technology = le32_to_cpu(resp->intval.value);
			break;
		case BATT_CHG_COUNTER:
			battmgr->info.charge_count = le32_to_cpu(resp->intval.value);
			break;
		case BATT_CYCLE_COUNT:
			battmgr->info.cycle_count = le32_to_cpu(resp->intval.value);
			break;
		case BATT_CHG_FULL_DESIGN:
			battmgr->info.design_capacity = le32_to_cpu(resp->intval.value);
			break;
		case BATT_CHG_FULL:
			battmgr->info.last_full_capacity = le32_to_cpu(resp->intval.value);
			break;
		case BATT_MODEL_NAME:
			strscpy(battmgr->info.model_number, resp->strval.model, BATTMGR_STRING_LEN);
			break;
		case BATT_TTF_AVG:
			battmgr->status.charge_time = le32_to_cpu(resp->intval.value);
			break;
		case BATT_TTE_AVG:
			battmgr->status.discharge_time = le32_to_cpu(resp->intval.value);
			break;
		case BATT_POWER_NOW:
			battmgr->status.power_now = le32_to_cpu(resp->intval.value);
			break;
		default:
			dev_warn(battmgr->dev, "unknown property %#x\n", property);
			break;
		}
		break;
	case BATTMGR_USB_PROPERTY_GET:
		property = le32_to_cpu(resp->intval.property);
		if (payload_len != sizeof(resp->intval)) {
			dev_warn(battmgr->dev,
				 "invalid payload length for %#x request: %zd\n",
				 property, payload_len);
			battmgr->error = -ENODATA;
			return;
		}

		battmgr->error = le32_to_cpu(resp->intval.result);
		if (battmgr->error)
			goto out_complete;

		switch (property) {
		case USB_ONLINE:
			battmgr->usb.online = le32_to_cpu(resp->intval.value);
			break;
		case USB_VOLT_NOW:
			battmgr->usb.voltage_now = le32_to_cpu(resp->intval.value);
			break;
		case USB_VOLT_MAX:
			battmgr->usb.voltage_max = le32_to_cpu(resp->intval.value);
			break;
		case USB_CURR_NOW:
			battmgr->usb.current_now = le32_to_cpu(resp->intval.value);
			break;
		case USB_CURR_MAX:
			battmgr->usb.current_max = le32_to_cpu(resp->intval.value);
			break;
		case USB_INPUT_CURR_LIMIT:
			battmgr->usb.current_limit = le32_to_cpu(resp->intval.value);
			break;
		case USB_TYPE:
			battmgr->usb.usb_type = le32_to_cpu(resp->intval.value);
			break;
		default:
			dev_warn(battmgr->dev, "unknown property %#x\n", property);
			break;
		}
		break;
	case BATTMGR_WLS_PROPERTY_GET:
		property = le32_to_cpu(resp->intval.property);
		if (payload_len != sizeof(resp->intval)) {
			dev_warn(battmgr->dev,
				 "invalid payload length for %#x request: %zd\n",
				 property, payload_len);
			battmgr->error = -ENODATA;
			return;
		}

		battmgr->error = le32_to_cpu(resp->intval.result);
		if (battmgr->error)
			goto out_complete;

		switch (property) {
		case WLS_ONLINE:
			battmgr->wireless.online = le32_to_cpu(resp->intval.value);
			break;
		case WLS_VOLT_NOW:
			battmgr->wireless.voltage_now = le32_to_cpu(resp->intval.value);
			break;
		case WLS_VOLT_MAX:
			battmgr->wireless.voltage_max = le32_to_cpu(resp->intval.value);
			break;
		case WLS_CURR_NOW:
			battmgr->wireless.current_now = le32_to_cpu(resp->intval.value);
			break;
		case WLS_CURR_MAX:
			battmgr->wireless.current_max = le32_to_cpu(resp->intval.value);
			break;
		default:
			dev_warn(battmgr->dev, "unknown property %#x\n", property);
			break;
		}
		break;
	case BATTMGR_REQUEST_NOTIFICATION:
		battmgr->error = 0;
		break;
	default:
		dev_warn(battmgr->dev, "unknown message %#x\n", opcode);
		break;
	}

out_complete:
	complete(&battmgr->ack);
}

static void qcom_battmgr_callback(const void *data, size_t len, void *priv)
{
	const struct pmic_glink_hdr *hdr = data;
	struct qcom_battmgr *battmgr = priv;
	unsigned int opcode = le32_to_cpu(hdr->opcode);

	if (opcode == BATTMGR_NOTIFICATION)
		qcom_battmgr_notification(battmgr, data, len);
	else if (battmgr->variant == QCOM_BATTMGR_SC8280XP)
		qcom_battmgr_sc8280xp_callback(battmgr, data, len);
	else
		qcom_battmgr_sm8350_callback(battmgr, data, len);
}

static void qcom_battmgr_enable_worker(struct work_struct *work)
{
	struct qcom_battmgr *battmgr = container_of(work, struct qcom_battmgr, enable_work);
	struct qcom_battmgr_enable_request req = {
		.hdr.owner = PMIC_GLINK_OWNER_BATTMGR,
		.hdr.type = PMIC_GLINK_NOTIFY,
		.hdr.opcode = BATTMGR_REQUEST_NOTIFICATION,
	};
	int ret;

	ret = qcom_battmgr_request(battmgr, &req, sizeof(req));
	if (ret)
		dev_err(battmgr->dev, "failed to request power notifications\n");
}

static void qcom_battmgr_pdr_notify(void *priv, int state)
{
	struct qcom_battmgr *battmgr = priv;

	if (state == SERVREG_SERVICE_STATE_UP) {
		battmgr->service_up = true;
		schedule_work(&battmgr->enable_work);
	} else {
		battmgr->service_up = false;
	}
}

static const struct of_device_id qcom_battmgr_of_variants[] = {
	{ .compatible = "qcom,sc8180x-pmic-glink", .data = (void *)QCOM_BATTMGR_SC8280XP },
	{ .compatible = "qcom,sc8280xp-pmic-glink", .data = (void *)QCOM_BATTMGR_SC8280XP },
	/* Unmatched devices falls back to QCOM_BATTMGR_SM8350 */
	{}
};

static char *qcom_battmgr_battery[] = { "battery" };

static int qcom_battmgr_probe(struct auxiliary_device *adev,
			      const struct auxiliary_device_id *id)
{
	struct power_supply_config psy_cfg_supply = {};
	struct power_supply_config psy_cfg = {};
	const struct of_device_id *match;
	struct qcom_battmgr *battmgr;
	struct device *dev = &adev->dev;

	battmgr = devm_kzalloc(dev, sizeof(*battmgr), GFP_KERNEL);
	if (!battmgr)
		return -ENOMEM;

	battmgr->dev = dev;

	psy_cfg.drv_data = battmgr;
	psy_cfg.of_node = adev->dev.of_node;

	psy_cfg_supply.drv_data = battmgr;
	psy_cfg_supply.of_node = adev->dev.of_node;
	psy_cfg_supply.supplied_to = qcom_battmgr_battery;
	psy_cfg_supply.num_supplicants = 1;

	INIT_WORK(&battmgr->enable_work, qcom_battmgr_enable_worker);
	mutex_init(&battmgr->lock);
	init_completion(&battmgr->ack);

	match = of_match_device(qcom_battmgr_of_variants, dev->parent);
	if (match)
		battmgr->variant = (unsigned long)match->data;
	else
		battmgr->variant = QCOM_BATTMGR_SM8350;

	if (battmgr->variant == QCOM_BATTMGR_SC8280XP) {
		battmgr->bat_psy = devm_power_supply_register(dev, &sc8280xp_bat_psy_desc, &psy_cfg);
		if (IS_ERR(battmgr->bat_psy))
			return dev_err_probe(dev, PTR_ERR(battmgr->bat_psy),
					     "failed to register battery power supply\n");

		battmgr->ac_psy = devm_power_supply_register(dev, &sc8280xp_ac_psy_desc, &psy_cfg_supply);
		if (IS_ERR(battmgr->ac_psy))
			return dev_err_probe(dev, PTR_ERR(battmgr->ac_psy),
					     "failed to register AC power supply\n");

		battmgr->usb_psy = devm_power_supply_register(dev, &sc8280xp_usb_psy_desc, &psy_cfg_supply);
		if (IS_ERR(battmgr->usb_psy))
			return dev_err_probe(dev, PTR_ERR(battmgr->usb_psy),
					     "failed to register USB power supply\n");

		battmgr->wls_psy = devm_power_supply_register(dev, &sc8280xp_wls_psy_desc, &psy_cfg_supply);
		if (IS_ERR(battmgr->wls_psy))
			return dev_err_probe(dev, PTR_ERR(battmgr->wls_psy),
					     "failed to register wireless charing power supply\n");
	} else {
		battmgr->bat_psy = devm_power_supply_register(dev, &sm8350_bat_psy_desc, &psy_cfg);
		if (IS_ERR(battmgr->bat_psy))
			return dev_err_probe(dev, PTR_ERR(battmgr->bat_psy),
					     "failed to register battery power supply\n");

		battmgr->usb_psy = devm_power_supply_register(dev, &sm8350_usb_psy_desc, &psy_cfg_supply);
		if (IS_ERR(battmgr->usb_psy))
			return dev_err_probe(dev, PTR_ERR(battmgr->usb_psy),
					     "failed to register USB power supply\n");

		battmgr->wls_psy = devm_power_supply_register(dev, &sm8350_wls_psy_desc, &psy_cfg_supply);
		if (IS_ERR(battmgr->wls_psy))
			return dev_err_probe(dev, PTR_ERR(battmgr->wls_psy),
					     "failed to register wireless charing power supply\n");
	}

	battmgr->client = devm_pmic_glink_register_client(dev,
							  PMIC_GLINK_OWNER_BATTMGR,
							  qcom_battmgr_callback,
							  qcom_battmgr_pdr_notify,
							  battmgr);
	return PTR_ERR_OR_ZERO(battmgr->client);
}

static const struct auxiliary_device_id qcom_battmgr_id_table[] = {
	{ .name = "pmic_glink.power-supply", },
	{},
};
MODULE_DEVICE_TABLE(auxiliary, qcom_battmgr_id_table);

static struct auxiliary_driver qcom_battmgr_driver = {
	.name = "pmic_glink_power_supply",
	.probe = qcom_battmgr_probe,
	.id_table = qcom_battmgr_id_table,
};

module_auxiliary_driver(qcom_battmgr_driver);

MODULE_DESCRIPTION("Qualcomm PMIC GLINK battery manager driver");
MODULE_LICENSE("GPL");