linux/drivers/pinctrl/sunxi
Samuel Holland 0569af4811 pinctrl: sunxi: Add driver for Allwinner D1
This SoC contains a pinctrl with a new register layout. Use the variant
parameter to set the right register offsets. This pinctrl also increases
the number of functions per pin from 8 to 16, taking advantage of all 4
bits in the mux config field (so far, only functions 0-8 and 14-15 are
used). This increases the maximum possible number of functions.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220713025233.27248-7-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-07-18 11:39:33 +02:00
..
Kconfig pinctrl: sunxi: Add driver for Allwinner D1 2022-07-18 11:39:33 +02:00
Makefile pinctrl: sunxi: Add driver for Allwinner D1 2022-07-18 11:39:33 +02:00
pinctrl-sun4i-a10.c pinctrl: sunxi: fix a typo when merging A20 support to A10 driver 2017-12-28 15:06:01 +01:00
pinctrl-sun5i.c pinctrl: sunxi: Disable strict mode for old pinctrl drivers 2017-10-31 09:45:00 +01:00
pinctrl-sun6i-a31-r.c pinctrl: sunxi: Remove reset controller consumers 2022-06-15 15:54:37 +02:00
pinctrl-sun6i-a31.c pinctrl: sunxi: Disable strict mode for old pinctrl drivers 2017-10-31 09:45:00 +01:00
pinctrl-sun8i-a23-r.c pinctrl: sunxi: Remove reset controller consumers 2022-06-15 15:54:37 +02:00
pinctrl-sun8i-a23.c pinctrl: sunxi: Disable strict mode for old pinctrl drivers 2017-10-31 09:45:00 +01:00
pinctrl-sun8i-a33.c pinctrl: sunxi: change irq_bank_base to irq_bank_map 2018-03-27 15:07:49 +02:00
pinctrl-sun8i-a83t-r.c pinctrl: sunxi: Remove reset controller consumers 2022-06-15 15:54:37 +02:00
pinctrl-sun8i-a83t.c pinctrl: sunxi: a83t: Fix IRQ offset typo for PH11 2018-12-07 13:32:19 +01:00
pinctrl-sun8i-h3-r.c pinctrl: sunxi: Disable strict mode for old pinctrl drivers 2017-10-31 09:45:00 +01:00
pinctrl-sun8i-h3.c pinctrl: sunxi: Disable strict mode for old pinctrl drivers 2017-10-31 09:45:00 +01:00
pinctrl-sun8i-v3s.c pinctrl: sunxi: v3s: introduce support for V3 2019-08-05 12:35:29 +02:00
pinctrl-sun9i-a80-r.c pinctrl: sunxi: Remove reset controller consumers 2022-06-15 15:54:37 +02:00
pinctrl-sun9i-a80.c pinctrl: sunxi: Prepare for alternative bias voltage setting methods 2019-04-23 12:29:21 +02:00
pinctrl-sun20i-d1.c pinctrl: sunxi: Add driver for Allwinner D1 2022-07-18 11:39:33 +02:00
pinctrl-sun50i-a64-r.c pinctrl: sunxi: Remove reset controller consumers 2022-06-15 15:54:37 +02:00
pinctrl-sun50i-a64.c pinctrl: sunxi: a64: Rename function ts0 to ts 2018-12-07 13:29:28 +01:00
pinctrl-sun50i-a100-r.c pinctrl: sunxi: Support the 2.5V I/O bias mode 2022-07-18 11:39:33 +02:00
pinctrl-sun50i-a100.c pinctrl: sunxi: Support the 2.5V I/O bias mode 2022-07-18 11:39:33 +02:00
pinctrl-sun50i-h5.c pinctrl: sunxi: sun50i-h5 use platform_irq_count 2020-01-07 09:55:33 +01:00
pinctrl-sun50i-h6-r.c pinctrl: sunxi: Add I/O bias setting for H6 R-PIO 2022-07-18 11:39:33 +02:00
pinctrl-sun50i-h6.c pinctrl: sunxi: Support I/O bias voltage setting on H6 2019-04-23 12:31:42 +02:00
pinctrl-sun50i-h616-r.c pinctrl: sunxi: Remove reset controller consumers 2022-06-15 15:54:37 +02:00
pinctrl-sun50i-h616.c pinctrl: sunxi: Support the 2.5V I/O bias mode 2022-07-18 11:39:33 +02:00
pinctrl-suniv-f1c100s.c pinctrl: sunxi: f1c100s: Fix signal name comment for PA2 SPI pin 2022-05-14 01:07:08 +02:00
pinctrl-sunxi.c pinctrl: sunxi: Add driver for Allwinner D1 2022-07-18 11:39:33 +02:00
pinctrl-sunxi.h pinctrl: sunxi: Add driver for Allwinner D1 2022-07-18 11:39:33 +02:00