e9d866d5a6
The pwm_ prefix suggests that pwm_busy_wait() is a function provided by the pwm core. Use the otherwise consistently used driver prefix for this function, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
263 lines
6.2 KiB
C
263 lines
6.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* drivers/pwm/pwm-vt8500.c
|
|
*
|
|
* Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
|
|
* Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include <asm/div64.h>
|
|
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_address.h>
|
|
|
|
/*
|
|
* SoC architecture allocates register space for 4 PWMs but only
|
|
* 2 are currently implemented.
|
|
*/
|
|
#define VT8500_NR_PWMS 2
|
|
|
|
#define REG_CTRL(pwm) (((pwm) << 4) + 0x00)
|
|
#define REG_SCALAR(pwm) (((pwm) << 4) + 0x04)
|
|
#define REG_PERIOD(pwm) (((pwm) << 4) + 0x08)
|
|
#define REG_DUTY(pwm) (((pwm) << 4) + 0x0C)
|
|
#define REG_STATUS 0x40
|
|
|
|
#define CTRL_ENABLE BIT(0)
|
|
#define CTRL_INVERT BIT(1)
|
|
#define CTRL_AUTOLOAD BIT(2)
|
|
#define CTRL_STOP_IMM BIT(3)
|
|
#define CTRL_LOAD_PRESCALE BIT(4)
|
|
#define CTRL_LOAD_PERIOD BIT(5)
|
|
|
|
#define STATUS_CTRL_UPDATE BIT(0)
|
|
#define STATUS_SCALAR_UPDATE BIT(1)
|
|
#define STATUS_PERIOD_UPDATE BIT(2)
|
|
#define STATUS_DUTY_UPDATE BIT(3)
|
|
#define STATUS_ALL_UPDATE 0x0F
|
|
|
|
struct vt8500_chip {
|
|
struct pwm_chip chip;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
};
|
|
|
|
#define to_vt8500_chip(chip) container_of(chip, struct vt8500_chip, chip)
|
|
|
|
#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
|
|
static inline void vt8500_pwm_busy_wait(struct vt8500_chip *vt8500, int nr, u8 bitmask)
|
|
{
|
|
int loops = msecs_to_loops(10);
|
|
u32 mask = bitmask << (nr << 8);
|
|
|
|
while ((readl(vt8500->base + REG_STATUS) & mask) && --loops)
|
|
cpu_relax();
|
|
|
|
if (unlikely(!loops))
|
|
dev_warn(vt8500->chip.dev, "Waiting for status bits 0x%x to clear timed out\n",
|
|
mask);
|
|
}
|
|
|
|
static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
int duty_ns, int period_ns)
|
|
{
|
|
struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
|
|
unsigned long long c;
|
|
unsigned long period_cycles, prescale, pv, dc;
|
|
int err;
|
|
u32 val;
|
|
|
|
err = clk_enable(vt8500->clk);
|
|
if (err < 0) {
|
|
dev_err(chip->dev, "failed to enable clock\n");
|
|
return err;
|
|
}
|
|
|
|
c = clk_get_rate(vt8500->clk);
|
|
c = c * period_ns;
|
|
do_div(c, 1000000000);
|
|
period_cycles = c;
|
|
|
|
if (period_cycles < 1)
|
|
period_cycles = 1;
|
|
prescale = (period_cycles - 1) / 4096;
|
|
pv = period_cycles / (prescale + 1) - 1;
|
|
if (pv > 4095)
|
|
pv = 4095;
|
|
|
|
if (prescale > 1023) {
|
|
clk_disable(vt8500->clk);
|
|
return -EINVAL;
|
|
}
|
|
|
|
c = (unsigned long long)pv * duty_ns;
|
|
do_div(c, period_ns);
|
|
dc = c;
|
|
|
|
writel(prescale, vt8500->base + REG_SCALAR(pwm->hwpwm));
|
|
vt8500_pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_SCALAR_UPDATE);
|
|
|
|
writel(pv, vt8500->base + REG_PERIOD(pwm->hwpwm));
|
|
vt8500_pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_PERIOD_UPDATE);
|
|
|
|
writel(dc, vt8500->base + REG_DUTY(pwm->hwpwm));
|
|
vt8500_pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_DUTY_UPDATE);
|
|
|
|
val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
|
|
val |= CTRL_AUTOLOAD;
|
|
writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
|
|
vt8500_pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
|
|
|
|
clk_disable(vt8500->clk);
|
|
return 0;
|
|
}
|
|
|
|
static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
|
|
int err;
|
|
u32 val;
|
|
|
|
err = clk_enable(vt8500->clk);
|
|
if (err < 0) {
|
|
dev_err(chip->dev, "failed to enable clock\n");
|
|
return err;
|
|
}
|
|
|
|
val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
|
|
val |= CTRL_ENABLE;
|
|
writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
|
|
vt8500_pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void vt8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
|
|
u32 val;
|
|
|
|
val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
|
|
val &= ~CTRL_ENABLE;
|
|
writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
|
|
vt8500_pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
|
|
|
|
clk_disable(vt8500->clk);
|
|
}
|
|
|
|
static int vt8500_pwm_set_polarity(struct pwm_chip *chip,
|
|
struct pwm_device *pwm,
|
|
enum pwm_polarity polarity)
|
|
{
|
|
struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
|
|
u32 val;
|
|
|
|
val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
|
|
|
|
if (polarity == PWM_POLARITY_INVERSED)
|
|
val |= CTRL_INVERT;
|
|
else
|
|
val &= ~CTRL_INVERT;
|
|
|
|
writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
|
|
vt8500_pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops vt8500_pwm_ops = {
|
|
.enable = vt8500_pwm_enable,
|
|
.disable = vt8500_pwm_disable,
|
|
.config = vt8500_pwm_config,
|
|
.set_polarity = vt8500_pwm_set_polarity,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct of_device_id vt8500_pwm_dt_ids[] = {
|
|
{ .compatible = "via,vt8500-pwm", },
|
|
{ /* Sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, vt8500_pwm_dt_ids);
|
|
|
|
static int vt8500_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct vt8500_chip *chip;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
int ret;
|
|
|
|
if (!np) {
|
|
dev_err(&pdev->dev, "invalid devicetree node\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
|
|
if (chip == NULL)
|
|
return -ENOMEM;
|
|
|
|
chip->chip.dev = &pdev->dev;
|
|
chip->chip.ops = &vt8500_pwm_ops;
|
|
chip->chip.npwm = VT8500_NR_PWMS;
|
|
|
|
chip->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(chip->clk)) {
|
|
dev_err(&pdev->dev, "clock source not specified\n");
|
|
return PTR_ERR(chip->clk);
|
|
}
|
|
|
|
chip->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(chip->base))
|
|
return PTR_ERR(chip->base);
|
|
|
|
ret = clk_prepare(chip->clk);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to prepare clock\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = pwmchip_add(&chip->chip);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to add PWM chip\n");
|
|
clk_unprepare(chip->clk);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, chip);
|
|
return ret;
|
|
}
|
|
|
|
static int vt8500_pwm_remove(struct platform_device *pdev)
|
|
{
|
|
struct vt8500_chip *chip = platform_get_drvdata(pdev);
|
|
|
|
pwmchip_remove(&chip->chip);
|
|
|
|
clk_unprepare(chip->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver vt8500_pwm_driver = {
|
|
.probe = vt8500_pwm_probe,
|
|
.remove = vt8500_pwm_remove,
|
|
.driver = {
|
|
.name = "vt8500-pwm",
|
|
.of_match_table = vt8500_pwm_dt_ids,
|
|
},
|
|
};
|
|
module_platform_driver(vt8500_pwm_driver);
|
|
|
|
MODULE_DESCRIPTION("VT8500 PWM Driver");
|
|
MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
|
|
MODULE_LICENSE("GPL v2");
|