6543ac13c6
The existing SoundWire support misses a clear Controller/Manager hiearchical definition to deal with all variants across SOC vendors. a) Intel platforms have one controller with 4 or more Managers. b) AMD platforms have two controllers with one Manager each, but due to BIOS issues use two different link_id values within the scope of a single controller. c) QCOM platforms have one or more controller with one Manager each. This patch adds a 'controller_id' which can be set by higher levels. If assigned to -1, the controller_id will be set to the system-unique IDA-assigned bus->id. The main change is that the bus->id is no longer used for any device name, which makes the definition completely predictable and not dependent on any enumeration order. The bus->id is only used to insert the Managers in the stream rt context. Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/stable/20231017160933.12624-2-pierre-louis.bossart%40linux.intel.com Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231017160933.12624-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
780 lines
20 KiB
C
780 lines
20 KiB
C
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
|
|
// Copyright(c) 2015-22 Intel Corporation.
|
|
|
|
/*
|
|
* Soundwire Intel Manager Driver
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/auxiliary_bus.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <sound/soc.h>
|
|
#include <linux/soundwire/sdw_registers.h>
|
|
#include <linux/soundwire/sdw.h>
|
|
#include <linux/soundwire/sdw_intel.h>
|
|
#include "cadence_master.h"
|
|
#include "bus.h"
|
|
#include "intel.h"
|
|
#include "intel_auxdevice.h"
|
|
|
|
#define INTEL_MASTER_SUSPEND_DELAY_MS 3000
|
|
|
|
/*
|
|
* debug/config flags for the Intel SoundWire Master.
|
|
*
|
|
* Since we may have multiple masters active, we can have up to 8
|
|
* flags reused in each byte, with master0 using the ls-byte, etc.
|
|
*/
|
|
|
|
#define SDW_INTEL_MASTER_DISABLE_PM_RUNTIME BIT(0)
|
|
#define SDW_INTEL_MASTER_DISABLE_CLOCK_STOP BIT(1)
|
|
#define SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE BIT(2)
|
|
#define SDW_INTEL_MASTER_DISABLE_MULTI_LINK BIT(3)
|
|
|
|
static int md_flags;
|
|
module_param_named(sdw_md_flags, md_flags, int, 0444);
|
|
MODULE_PARM_DESC(sdw_md_flags, "SoundWire Intel Master device flags (0x0 all off)");
|
|
|
|
struct wake_capable_part {
|
|
const u16 mfg_id;
|
|
const u16 part_id;
|
|
};
|
|
|
|
static struct wake_capable_part wake_capable_list[] = {
|
|
{0x025d, 0x5682},
|
|
{0x025d, 0x700},
|
|
{0x025d, 0x711},
|
|
{0x025d, 0x1712},
|
|
{0x025d, 0x1713},
|
|
{0x025d, 0x1716},
|
|
{0x025d, 0x1717},
|
|
{0x025d, 0x712},
|
|
{0x025d, 0x713},
|
|
{0x025d, 0x714},
|
|
{0x025d, 0x715},
|
|
{0x025d, 0x716},
|
|
{0x025d, 0x717},
|
|
{0x025d, 0x722},
|
|
};
|
|
|
|
static bool is_wake_capable(struct sdw_slave *slave)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wake_capable_list); i++)
|
|
if (slave->id.part_id == wake_capable_list[i].part_id &&
|
|
slave->id.mfg_id == wake_capable_list[i].mfg_id)
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
static int generic_pre_bank_switch(struct sdw_bus *bus)
|
|
{
|
|
struct sdw_cdns *cdns = bus_to_cdns(bus);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
|
|
return sdw->link_res->hw_ops->pre_bank_switch(sdw);
|
|
}
|
|
|
|
static int generic_post_bank_switch(struct sdw_bus *bus)
|
|
{
|
|
struct sdw_cdns *cdns = bus_to_cdns(bus);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
|
|
return sdw->link_res->hw_ops->post_bank_switch(sdw);
|
|
}
|
|
|
|
static void generic_new_peripheral_assigned(struct sdw_bus *bus,
|
|
struct sdw_slave *slave,
|
|
int dev_num)
|
|
{
|
|
struct sdw_cdns *cdns = bus_to_cdns(bus);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
int dev_num_min;
|
|
int dev_num_max;
|
|
bool wake_capable = slave->prop.wake_capable || is_wake_capable(slave);
|
|
|
|
if (wake_capable) {
|
|
dev_num_min = SDW_INTEL_DEV_NUM_IDA_MIN;
|
|
dev_num_max = SDW_MAX_DEVICES;
|
|
} else {
|
|
dev_num_min = 1;
|
|
dev_num_max = SDW_INTEL_DEV_NUM_IDA_MIN - 1;
|
|
}
|
|
|
|
/* paranoia check, this should never happen */
|
|
if (dev_num < dev_num_min || dev_num > dev_num_max) {
|
|
dev_err(bus->dev, "%s: invalid dev_num %d, wake supported %d\n",
|
|
__func__, dev_num, slave->prop.wake_capable);
|
|
return;
|
|
}
|
|
|
|
if (sdw->link_res->hw_ops->program_sdi && wake_capable)
|
|
sdw->link_res->hw_ops->program_sdi(sdw, dev_num);
|
|
}
|
|
|
|
static int sdw_master_read_intel_prop(struct sdw_bus *bus)
|
|
{
|
|
struct sdw_master_prop *prop = &bus->prop;
|
|
struct fwnode_handle *link;
|
|
char name[32];
|
|
u32 quirk_mask;
|
|
|
|
/* Find master handle */
|
|
snprintf(name, sizeof(name),
|
|
"mipi-sdw-link-%d-subproperties", bus->link_id);
|
|
|
|
link = device_get_named_child_node(bus->dev, name);
|
|
if (!link) {
|
|
dev_err(bus->dev, "Master node %s not found\n", name);
|
|
return -EIO;
|
|
}
|
|
|
|
fwnode_property_read_u32(link,
|
|
"intel-sdw-ip-clock",
|
|
&prop->mclk_freq);
|
|
|
|
/* the values reported by BIOS are the 2x clock, not the bus clock */
|
|
prop->mclk_freq /= 2;
|
|
|
|
fwnode_property_read_u32(link,
|
|
"intel-quirk-mask",
|
|
&quirk_mask);
|
|
|
|
if (quirk_mask & SDW_INTEL_QUIRK_MASK_BUS_DISABLE)
|
|
prop->hw_disabled = true;
|
|
|
|
prop->quirks = SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH |
|
|
SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intel_prop_read(struct sdw_bus *bus)
|
|
{
|
|
/* Initialize with default handler to read all DisCo properties */
|
|
sdw_master_read_prop(bus);
|
|
|
|
/* read Intel-specific properties */
|
|
sdw_master_read_intel_prop(bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static DEFINE_IDA(intel_peripheral_ida);
|
|
|
|
static int intel_get_device_num_ida(struct sdw_bus *bus, struct sdw_slave *slave)
|
|
{
|
|
int bit;
|
|
|
|
if (slave->prop.wake_capable || is_wake_capable(slave))
|
|
return ida_alloc_range(&intel_peripheral_ida,
|
|
SDW_INTEL_DEV_NUM_IDA_MIN, SDW_MAX_DEVICES,
|
|
GFP_KERNEL);
|
|
|
|
bit = find_first_zero_bit(slave->bus->assigned, SDW_MAX_DEVICES);
|
|
if (bit == SDW_MAX_DEVICES)
|
|
return -ENODEV;
|
|
|
|
return bit;
|
|
}
|
|
|
|
static void intel_put_device_num_ida(struct sdw_bus *bus, struct sdw_slave *slave)
|
|
{
|
|
if (slave->prop.wake_capable || is_wake_capable(slave))
|
|
ida_free(&intel_peripheral_ida, slave->dev_num);
|
|
}
|
|
|
|
static struct sdw_master_ops sdw_intel_ops = {
|
|
.read_prop = intel_prop_read,
|
|
.override_adr = sdw_dmi_override_adr,
|
|
.xfer_msg = cdns_xfer_msg,
|
|
.xfer_msg_defer = cdns_xfer_msg_defer,
|
|
.set_bus_conf = cdns_bus_conf,
|
|
.pre_bank_switch = generic_pre_bank_switch,
|
|
.post_bank_switch = generic_post_bank_switch,
|
|
.read_ping_status = cdns_read_ping_status,
|
|
.get_device_num = intel_get_device_num_ida,
|
|
.put_device_num = intel_put_device_num_ida,
|
|
.new_peripheral_assigned = generic_new_peripheral_assigned,
|
|
};
|
|
|
|
/*
|
|
* probe and init (aux_dev_id argument is required by function prototype but not used)
|
|
*/
|
|
static int intel_link_probe(struct auxiliary_device *auxdev,
|
|
const struct auxiliary_device_id *aux_dev_id)
|
|
|
|
{
|
|
struct device *dev = &auxdev->dev;
|
|
struct sdw_intel_link_dev *ldev = auxiliary_dev_to_sdw_intel_link_dev(auxdev);
|
|
struct sdw_intel *sdw;
|
|
struct sdw_cdns *cdns;
|
|
struct sdw_bus *bus;
|
|
int ret;
|
|
|
|
sdw = devm_kzalloc(dev, sizeof(*sdw), GFP_KERNEL);
|
|
if (!sdw)
|
|
return -ENOMEM;
|
|
|
|
cdns = &sdw->cdns;
|
|
bus = &cdns->bus;
|
|
|
|
sdw->instance = auxdev->id;
|
|
sdw->link_res = &ldev->link_res;
|
|
cdns->dev = dev;
|
|
cdns->registers = sdw->link_res->registers;
|
|
cdns->ip_offset = sdw->link_res->ip_offset;
|
|
cdns->instance = sdw->instance;
|
|
cdns->msg_count = 0;
|
|
|
|
/* single controller for all SoundWire links */
|
|
bus->controller_id = 0;
|
|
|
|
bus->link_id = auxdev->id;
|
|
bus->clk_stop_timeout = 1;
|
|
|
|
sdw_cdns_probe(cdns);
|
|
|
|
/* Set ops */
|
|
bus->ops = &sdw_intel_ops;
|
|
|
|
/* set driver data, accessed by snd_soc_dai_get_drvdata() */
|
|
auxiliary_set_drvdata(auxdev, cdns);
|
|
|
|
/* use generic bandwidth allocation algorithm */
|
|
sdw->cdns.bus.compute_params = sdw_compute_params;
|
|
|
|
/* avoid resuming from pm_runtime suspend if it's not required */
|
|
dev_pm_set_driver_flags(dev, DPM_FLAG_SMART_SUSPEND);
|
|
|
|
ret = sdw_bus_master_add(bus, dev, dev->fwnode);
|
|
if (ret) {
|
|
dev_err(dev, "sdw_bus_master_add fail: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (bus->prop.hw_disabled)
|
|
dev_info(dev,
|
|
"SoundWire master %d is disabled, will be ignored\n",
|
|
bus->link_id);
|
|
/*
|
|
* Ignore BIOS err_threshold, it's a really bad idea when dealing
|
|
* with multiple hardware synchronized links
|
|
*/
|
|
bus->prop.err_threshold = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int intel_link_startup(struct auxiliary_device *auxdev)
|
|
{
|
|
struct device *dev = &auxdev->dev;
|
|
struct sdw_cdns *cdns = auxiliary_get_drvdata(auxdev);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_bus *bus = &cdns->bus;
|
|
int link_flags;
|
|
bool multi_link;
|
|
u32 clock_stop_quirks;
|
|
int ret;
|
|
|
|
if (bus->prop.hw_disabled) {
|
|
dev_info(dev,
|
|
"SoundWire master %d is disabled, ignoring\n",
|
|
sdw->instance);
|
|
return 0;
|
|
}
|
|
|
|
link_flags = md_flags >> (bus->link_id * 8);
|
|
multi_link = !(link_flags & SDW_INTEL_MASTER_DISABLE_MULTI_LINK);
|
|
if (!multi_link) {
|
|
dev_dbg(dev, "Multi-link is disabled\n");
|
|
} else {
|
|
/*
|
|
* hardware-based synchronization is required regardless
|
|
* of the number of segments used by a stream: SSP-based
|
|
* synchronization is gated by gsync when the multi-master
|
|
* mode is set.
|
|
*/
|
|
bus->hw_sync_min_links = 1;
|
|
}
|
|
bus->multi_link = multi_link;
|
|
|
|
/* Initialize shim, controller */
|
|
ret = sdw_intel_link_power_up(sdw);
|
|
if (ret)
|
|
goto err_init;
|
|
|
|
/* Register DAIs */
|
|
ret = sdw_intel_register_dai(sdw);
|
|
if (ret) {
|
|
dev_err(dev, "DAI registration failed: %d\n", ret);
|
|
goto err_power_up;
|
|
}
|
|
|
|
sdw_intel_debugfs_init(sdw);
|
|
|
|
/* Enable runtime PM */
|
|
if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME)) {
|
|
pm_runtime_set_autosuspend_delay(dev,
|
|
INTEL_MASTER_SUSPEND_DELAY_MS);
|
|
pm_runtime_use_autosuspend(dev);
|
|
pm_runtime_mark_last_busy(dev);
|
|
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
|
|
pm_runtime_resume(bus->dev);
|
|
}
|
|
|
|
/* start bus */
|
|
ret = sdw_intel_start_bus(sdw);
|
|
if (ret) {
|
|
dev_err(dev, "bus start failed: %d\n", ret);
|
|
goto err_pm_runtime;
|
|
}
|
|
|
|
clock_stop_quirks = sdw->link_res->clock_stop_quirks;
|
|
if (clock_stop_quirks & SDW_INTEL_CLK_STOP_NOT_ALLOWED) {
|
|
/*
|
|
* To keep the clock running we need to prevent
|
|
* pm_runtime suspend from happening by increasing the
|
|
* reference count.
|
|
* This quirk is specified by the parent PCI device in
|
|
* case of specific latency requirements. It will have
|
|
* no effect if pm_runtime is disabled by the user via
|
|
* a module parameter for testing purposes.
|
|
*/
|
|
pm_runtime_get_noresume(dev);
|
|
}
|
|
|
|
/*
|
|
* The runtime PM status of Slave devices is "Unsupported"
|
|
* until they report as ATTACHED. If they don't, e.g. because
|
|
* there are no Slave devices populated or if the power-on is
|
|
* delayed or dependent on a power switch, the Master will
|
|
* remain active and prevent its parent from suspending.
|
|
*
|
|
* Conditionally force the pm_runtime core to re-evaluate the
|
|
* Master status in the absence of any Slave activity. A quirk
|
|
* is provided to e.g. deal with Slaves that may be powered on
|
|
* with a delay. A more complete solution would require the
|
|
* definition of Master properties.
|
|
*/
|
|
if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE)) {
|
|
pm_runtime_mark_last_busy(bus->dev);
|
|
pm_runtime_mark_last_busy(dev);
|
|
pm_runtime_idle(dev);
|
|
}
|
|
|
|
sdw->startup_done = true;
|
|
return 0;
|
|
|
|
err_pm_runtime:
|
|
if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME))
|
|
pm_runtime_disable(dev);
|
|
err_power_up:
|
|
sdw_intel_link_power_down(sdw);
|
|
err_init:
|
|
return ret;
|
|
}
|
|
|
|
static void intel_link_remove(struct auxiliary_device *auxdev)
|
|
{
|
|
struct sdw_cdns *cdns = auxiliary_get_drvdata(auxdev);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_bus *bus = &cdns->bus;
|
|
|
|
/*
|
|
* Since pm_runtime is already disabled, we don't decrease
|
|
* the refcount when the clock_stop_quirk is
|
|
* SDW_INTEL_CLK_STOP_NOT_ALLOWED
|
|
*/
|
|
if (!bus->prop.hw_disabled) {
|
|
sdw_intel_debugfs_exit(sdw);
|
|
sdw_cdns_enable_interrupt(cdns, false);
|
|
}
|
|
sdw_bus_master_delete(bus);
|
|
}
|
|
|
|
int intel_link_process_wakeen_event(struct auxiliary_device *auxdev)
|
|
{
|
|
struct device *dev = &auxdev->dev;
|
|
struct sdw_intel *sdw;
|
|
struct sdw_bus *bus;
|
|
|
|
sdw = auxiliary_get_drvdata(auxdev);
|
|
bus = &sdw->cdns.bus;
|
|
|
|
if (bus->prop.hw_disabled || !sdw->startup_done) {
|
|
dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n",
|
|
bus->link_id);
|
|
return 0;
|
|
}
|
|
|
|
if (!sdw_intel_shim_check_wake(sdw))
|
|
return 0;
|
|
|
|
/* disable WAKEEN interrupt ASAP to prevent interrupt flood */
|
|
sdw_intel_shim_wake(sdw, false);
|
|
|
|
/*
|
|
* resume the Master, which will generate a bus reset and result in
|
|
* Slaves re-attaching and be re-enumerated. The SoundWire physical
|
|
* device which generated the wake will trigger an interrupt, which
|
|
* will in turn cause the corresponding Linux Slave device to be
|
|
* resumed and the Slave codec driver to check the status.
|
|
*/
|
|
pm_request_resume(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* PM calls
|
|
*/
|
|
|
|
static int intel_resume_child_device(struct device *dev, void *data)
|
|
{
|
|
int ret;
|
|
struct sdw_slave *slave = dev_to_sdw_dev(dev);
|
|
|
|
if (!slave->probed) {
|
|
dev_dbg(dev, "skipping device, no probed driver\n");
|
|
return 0;
|
|
}
|
|
if (!slave->dev_num_sticky) {
|
|
dev_dbg(dev, "skipping device, never detected on bus\n");
|
|
return 0;
|
|
}
|
|
|
|
ret = pm_request_resume(dev);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: pm_request_resume failed: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused intel_pm_prepare(struct device *dev)
|
|
{
|
|
struct sdw_cdns *cdns = dev_get_drvdata(dev);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_bus *bus = &cdns->bus;
|
|
u32 clock_stop_quirks;
|
|
int ret;
|
|
|
|
if (bus->prop.hw_disabled || !sdw->startup_done) {
|
|
dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n",
|
|
bus->link_id);
|
|
return 0;
|
|
}
|
|
|
|
clock_stop_quirks = sdw->link_res->clock_stop_quirks;
|
|
|
|
if (pm_runtime_suspended(dev) &&
|
|
pm_runtime_suspended(dev->parent) &&
|
|
((clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) ||
|
|
!clock_stop_quirks)) {
|
|
/*
|
|
* if we've enabled clock stop, and the parent is suspended, the SHIM registers
|
|
* are not accessible and the shim wake cannot be disabled.
|
|
* The only solution is to resume the entire bus to full power
|
|
*/
|
|
|
|
/*
|
|
* If any operation in this block fails, we keep going since we don't want
|
|
* to prevent system suspend from happening and errors should be recoverable
|
|
* on resume.
|
|
*/
|
|
|
|
/*
|
|
* first resume the device for this link. This will also by construction
|
|
* resume the PCI parent device.
|
|
*/
|
|
ret = pm_request_resume(dev);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: pm_request_resume failed: %d\n", __func__, ret);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Continue resuming the entire bus (parent + child devices) to exit
|
|
* the clock stop mode. If there are no devices connected on this link
|
|
* this is a no-op.
|
|
* The resume to full power could have been implemented with a .prepare
|
|
* step in SoundWire codec drivers. This would however require a lot
|
|
* of code to handle an Intel-specific corner case. It is simpler in
|
|
* practice to add a loop at the link level.
|
|
*/
|
|
ret = device_for_each_child(bus->dev, NULL, intel_resume_child_device);
|
|
|
|
if (ret < 0)
|
|
dev_err(dev, "%s: intel_resume_child_device failed: %d\n", __func__, ret);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused intel_suspend(struct device *dev)
|
|
{
|
|
struct sdw_cdns *cdns = dev_get_drvdata(dev);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_bus *bus = &cdns->bus;
|
|
u32 clock_stop_quirks;
|
|
int ret;
|
|
|
|
if (bus->prop.hw_disabled || !sdw->startup_done) {
|
|
dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n",
|
|
bus->link_id);
|
|
return 0;
|
|
}
|
|
|
|
if (pm_runtime_suspended(dev)) {
|
|
dev_dbg(dev, "pm_runtime status: suspended\n");
|
|
|
|
clock_stop_quirks = sdw->link_res->clock_stop_quirks;
|
|
|
|
if ((clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) ||
|
|
!clock_stop_quirks) {
|
|
|
|
if (pm_runtime_suspended(dev->parent)) {
|
|
/*
|
|
* paranoia check: this should not happen with the .prepare
|
|
* resume to full power
|
|
*/
|
|
dev_err(dev, "%s: invalid config: parent is suspended\n", __func__);
|
|
} else {
|
|
sdw_intel_shim_wake(sdw, false);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
ret = sdw_intel_stop_bus(sdw, false);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: cannot stop bus: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused intel_suspend_runtime(struct device *dev)
|
|
{
|
|
struct sdw_cdns *cdns = dev_get_drvdata(dev);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_bus *bus = &cdns->bus;
|
|
u32 clock_stop_quirks;
|
|
int ret;
|
|
|
|
if (bus->prop.hw_disabled || !sdw->startup_done) {
|
|
dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n",
|
|
bus->link_id);
|
|
return 0;
|
|
}
|
|
|
|
clock_stop_quirks = sdw->link_res->clock_stop_quirks;
|
|
|
|
if (clock_stop_quirks & SDW_INTEL_CLK_STOP_TEARDOWN) {
|
|
ret = sdw_intel_stop_bus(sdw, false);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: cannot stop bus during teardown: %d\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
} else if (clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET || !clock_stop_quirks) {
|
|
ret = sdw_intel_stop_bus(sdw, true);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: cannot stop bus during clock_stop: %d\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
} else {
|
|
dev_err(dev, "%s clock_stop_quirks %x unsupported\n",
|
|
__func__, clock_stop_quirks);
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused intel_resume(struct device *dev)
|
|
{
|
|
struct sdw_cdns *cdns = dev_get_drvdata(dev);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_bus *bus = &cdns->bus;
|
|
int link_flags;
|
|
int ret;
|
|
|
|
if (bus->prop.hw_disabled || !sdw->startup_done) {
|
|
dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n",
|
|
bus->link_id);
|
|
return 0;
|
|
}
|
|
|
|
link_flags = md_flags >> (bus->link_id * 8);
|
|
|
|
if (pm_runtime_suspended(dev)) {
|
|
dev_dbg(dev, "pm_runtime status was suspended, forcing active\n");
|
|
|
|
/* follow required sequence from runtime_pm.rst */
|
|
pm_runtime_disable(dev);
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_mark_last_busy(dev);
|
|
pm_runtime_enable(dev);
|
|
|
|
pm_runtime_resume(bus->dev);
|
|
|
|
link_flags = md_flags >> (bus->link_id * 8);
|
|
|
|
if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE))
|
|
pm_runtime_idle(dev);
|
|
}
|
|
|
|
ret = sdw_intel_link_power_up(sdw);
|
|
if (ret) {
|
|
dev_err(dev, "%s failed: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* make sure all Slaves are tagged as UNATTACHED and provide
|
|
* reason for reinitialization
|
|
*/
|
|
sdw_clear_slave_status(bus, SDW_UNATTACH_REQUEST_MASTER_RESET);
|
|
|
|
ret = sdw_intel_start_bus(sdw);
|
|
if (ret < 0) {
|
|
dev_err(dev, "cannot start bus during resume\n");
|
|
sdw_intel_link_power_down(sdw);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* after system resume, the pm_runtime suspend() may kick in
|
|
* during the enumeration, before any children device force the
|
|
* master device to remain active. Using pm_runtime_get()
|
|
* routines is not really possible, since it'd prevent the
|
|
* master from suspending.
|
|
* A reasonable compromise is to update the pm_runtime
|
|
* counters and delay the pm_runtime suspend by several
|
|
* seconds, by when all enumeration should be complete.
|
|
*/
|
|
pm_runtime_mark_last_busy(bus->dev);
|
|
pm_runtime_mark_last_busy(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused intel_resume_runtime(struct device *dev)
|
|
{
|
|
struct sdw_cdns *cdns = dev_get_drvdata(dev);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_bus *bus = &cdns->bus;
|
|
u32 clock_stop_quirks;
|
|
int ret;
|
|
|
|
if (bus->prop.hw_disabled || !sdw->startup_done) {
|
|
dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n",
|
|
bus->link_id);
|
|
return 0;
|
|
}
|
|
|
|
/* unconditionally disable WAKEEN interrupt */
|
|
sdw_intel_shim_wake(sdw, false);
|
|
|
|
clock_stop_quirks = sdw->link_res->clock_stop_quirks;
|
|
|
|
if (clock_stop_quirks & SDW_INTEL_CLK_STOP_TEARDOWN) {
|
|
ret = sdw_intel_link_power_up(sdw);
|
|
if (ret) {
|
|
dev_err(dev, "%s: power_up failed after teardown: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* make sure all Slaves are tagged as UNATTACHED and provide
|
|
* reason for reinitialization
|
|
*/
|
|
sdw_clear_slave_status(bus, SDW_UNATTACH_REQUEST_MASTER_RESET);
|
|
|
|
ret = sdw_intel_start_bus(sdw);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: cannot start bus after teardown: %d\n", __func__, ret);
|
|
sdw_intel_link_power_down(sdw);
|
|
return ret;
|
|
}
|
|
|
|
} else if (clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) {
|
|
ret = sdw_intel_link_power_up(sdw);
|
|
if (ret) {
|
|
dev_err(dev, "%s: power_up failed after bus reset: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = sdw_intel_start_bus_after_reset(sdw);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: cannot start bus after reset: %d\n", __func__, ret);
|
|
sdw_intel_link_power_down(sdw);
|
|
return ret;
|
|
}
|
|
} else if (!clock_stop_quirks) {
|
|
|
|
sdw_intel_check_clock_stop(sdw);
|
|
|
|
ret = sdw_intel_link_power_up(sdw);
|
|
if (ret) {
|
|
dev_err(dev, "%s: power_up failed: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = sdw_intel_start_bus_after_clock_stop(sdw);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: cannot start bus after clock stop: %d\n", __func__, ret);
|
|
sdw_intel_link_power_down(sdw);
|
|
return ret;
|
|
}
|
|
} else {
|
|
dev_err(dev, "%s: clock_stop_quirks %x unsupported\n",
|
|
__func__, clock_stop_quirks);
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dev_pm_ops intel_pm = {
|
|
.prepare = intel_pm_prepare,
|
|
SET_SYSTEM_SLEEP_PM_OPS(intel_suspend, intel_resume)
|
|
SET_RUNTIME_PM_OPS(intel_suspend_runtime, intel_resume_runtime, NULL)
|
|
};
|
|
|
|
static const struct auxiliary_device_id intel_link_id_table[] = {
|
|
{ .name = "soundwire_intel.link" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(auxiliary, intel_link_id_table);
|
|
|
|
static struct auxiliary_driver sdw_intel_drv = {
|
|
.probe = intel_link_probe,
|
|
.remove = intel_link_remove,
|
|
.driver = {
|
|
/* auxiliary_driver_register() sets .name to be the modname */
|
|
.pm = &intel_pm,
|
|
},
|
|
.id_table = intel_link_id_table
|
|
};
|
|
module_auxiliary_driver(sdw_intel_drv);
|
|
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
MODULE_DESCRIPTION("Intel Soundwire Link Driver");
|