IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This introduces the RDP442 and RDP433 reference devices on IPQ5332 and
IPQ9574, respectively. RDP418, RDP433, RDP449 and RDP453 on the IPQ9574
are added. On MSM8939 the Square T2 board and the Sony Xperia M4 Aqua is
added. Support for Acer Apire 1, built on the Snapdragon 7c platform is
introduced. Fxtec Pro1X on SM6115 is added. Lastly long floating
support for SC8180X and the Lenovo Flex 5G, and the Primus reference
device, has been added.
On IPQ5332 and IPQ6018 QFPROM support is introduced, and as described
above the RDP442 board on the prior. Download mode support and various
reserved-memory regions are also introduced on IPQ6018.
IPQ8074 gains another SPI controller.
On IPQ9574 CPU frequency scaling, low speed busses, RNG, Watchdog,
qfprom, SMEM and RPM are introduced. As are support for four new board,
mentioned above.
MSM8916 gains a range of structural improvements, to better suite the
various boards supported. Regulator constraints are corrected and their
states are adjusted to match reality (e.g. always-on regulators marked
as always-on). BQ Aquaris X5 gains support for front flash LED.
As mentioned above, MSM8939 support is introduced with support for
boards from Sony and Square.
MSM8953 gains DMA support in I2C masters.
MSM8996-based Sony Xperia boards gains description of their RGB
notification LED.
On SA8775P support for UFS, USB, GPU clock and iommu controllers, PMU,
AOSS, watchdog and missing low-speed controllers are added. On the Ride
platform UFS, USB and an i2c bus are enabled.
iommu properties are added to QSPI on both SC7180 and SC7280. LPASS
clocks are adjusted and MDP node cleaned up slightly, on SC7180. As
mentioned above, support for Acer Aspire 1 is introduced.
Long lingering patches introducing SC8180X, the Lenovo Flex 5G and the
Primus reference device has been merged.
On SC8280XP ethernet is added and enabled on the automotive ride
platform. An SDC controller is introduced and enabled on the SC8280XP
CRD. On the Lenovo Thinkpad X13s and the CRD reference device the USB
SuperSpeed phy is added to the Type-C graph, to enable support for
orientation switching.
Fairphone 3 gains support for its notification LED.
On SDM845 the iommu stream for QSPI is defined, SHIFT SHIFT6mq gains
support for flash LED and the RB3 (DB845c) board gains support for
bonded/dual DSI-mode, to allow 4k output.
On SM6115 CPU idle-states, crypto engine support and SuperSpeed USB PHY
are introduced. As mentioned above Fxtec Pro1X is introduced. On the
QRB4210 Robotics Platform RB2 USB, Audio and Compute DSPs, display,
CAN-bus and GPIO LEDs are introduced, fixed regulators are described and
the SD-card description is corrected.
Support for crypto engine is added to SM8150, while Sony Xperia 1 and 5
gains SD-card support, camera regulators and GPIO line names sorted out.
SM8250 also gets support for crypto engine, and Sony Xperia 1 II and 5
II gains support for hardware video accelerator.
Crypto engine is introduced for SM8350 as well. The HDK gets the USB
Type-C graph described for Superspeed orientation switching and
DisplayPort output.
On SM8450 video clock controller and crypto engine are added, missing
opp levels are introduced and the USB Type-C graph is defined for
orientation switching and altmode.
SM8550 gains GPU and video clock controllers and missing opp levels are
added. The WCD9385 audio codec is added for the SM8550 MTP and on the
QRD PCIe, USB, audio display and flash LED are added.
-----BEGIN PGP SIGNATURE-----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=OvdD
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jxMR
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.5
This introduces the RDP442 and RDP433 reference devices on IPQ5332 and
IPQ9574, respectively. RDP418, RDP433, RDP449 and RDP453 on the IPQ9574
are added. On MSM8939 the Square T2 board and the Sony Xperia M4 Aqua is
added. Support for Acer Apire 1, built on the Snapdragon 7c platform is
introduced. Fxtec Pro1X on SM6115 is added. Lastly long floating
support for SC8180X and the Lenovo Flex 5G, and the Primus reference
device, has been added.
On IPQ5332 and IPQ6018 QFPROM support is introduced, and as described
above the RDP442 board on the prior. Download mode support and various
reserved-memory regions are also introduced on IPQ6018.
IPQ8074 gains another SPI controller.
On IPQ9574 CPU frequency scaling, low speed busses, RNG, Watchdog,
qfprom, SMEM and RPM are introduced. As are support for four new board,
mentioned above.
MSM8916 gains a range of structural improvements, to better suite the
various boards supported. Regulator constraints are corrected and their
states are adjusted to match reality (e.g. always-on regulators marked
as always-on). BQ Aquaris X5 gains support for front flash LED.
As mentioned above, MSM8939 support is introduced with support for
boards from Sony and Square.
MSM8953 gains DMA support in I2C masters.
MSM8996-based Sony Xperia boards gains description of their RGB
notification LED.
On SA8775P support for UFS, USB, GPU clock and iommu controllers, PMU,
AOSS, watchdog and missing low-speed controllers are added. On the Ride
platform UFS, USB and an i2c bus are enabled.
iommu properties are added to QSPI on both SC7180 and SC7280. LPASS
clocks are adjusted and MDP node cleaned up slightly, on SC7180. As
mentioned above, support for Acer Aspire 1 is introduced.
Long lingering patches introducing SC8180X, the Lenovo Flex 5G and the
Primus reference device has been merged.
On SC8280XP ethernet is added and enabled on the automotive ride
platform. An SDC controller is introduced and enabled on the SC8280XP
CRD. On the Lenovo Thinkpad X13s and the CRD reference device the USB
SuperSpeed phy is added to the Type-C graph, to enable support for
orientation switching.
Fairphone 3 gains support for its notification LED.
On SDM845 the iommu stream for QSPI is defined, SHIFT SHIFT6mq gains
support for flash LED and the RB3 (DB845c) board gains support for
bonded/dual DSI-mode, to allow 4k output.
On SM6115 CPU idle-states, crypto engine support and SuperSpeed USB PHY
are introduced. As mentioned above Fxtec Pro1X is introduced. On the
QRB4210 Robotics Platform RB2 USB, Audio and Compute DSPs, display,
CAN-bus and GPIO LEDs are introduced, fixed regulators are described and
the SD-card description is corrected.
Support for crypto engine is added to SM8150, while Sony Xperia 1 and 5
gains SD-card support, camera regulators and GPIO line names sorted out.
SM8250 also gets support for crypto engine, and Sony Xperia 1 II and 5
II gains support for hardware video accelerator.
Crypto engine is introduced for SM8350 as well. The HDK gets the USB
Type-C graph described for Superspeed orientation switching and
DisplayPort output.
On SM8450 video clock controller and crypto engine are added, missing
opp levels are introduced and the USB Type-C graph is defined for
orientation switching and altmode.
SM8550 gains GPU and video clock controllers and missing opp levels are
added. The WCD9385 audio codec is added for the SM8550 MTP and on the
QRD PCIe, USB, audio display and flash LED are added.
* tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (195 commits)
arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G
arm64: dts: qcom: sc8180x: Introduce Primus
arm64: dts: qcom: sc8180x: Add pmics
arm64: dts: qcom: sc8180x: Add display and gpu nodes
arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes
arm64: dts: qcom: sc8180x: Add PCIe instances
arm64: dts: qcom: sc8180x: Add QUPs
arm64: dts: qcom: sc8180x: Add thermal zones
arm64: dts: qcom: sc8180x: Add interconnects and lmh
arm64: dts: qcom: Introduce the SC8180x platform
arm64: dts: qcom: msm8916: Move aliases to boards
arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codec
arm64: dts: qcom: msm8916/39: Clean up MDSS labels
arm64: dts: qcom: msm8916/39: Use consistent name for I2C/SPI pinctrl
arm64: dts: qcom: msm8916/39: Rename &blsp1_uartN -> &blsp_uartN
arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm
arm64: dts: qcom: qrb4210-rb2: Enable USB node
arm64: dts: qcom: sm6115: Add USB SS qmp phy node
arm64: dts: qcom: ipq5332: add support for the RDP442 variant
dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family
...
Link: https://lore.kernel.org/r/20230611004944.2481596-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
60c2f542a7