linux/drivers/scsi/g_NCR5380.h
Finn Thain 61e1ce588b scsi: ncr5380: Use correct types for device register accessors
For timeout values adopt unsigned long, which is the type of jiffies etc.

For chip register values and bit masks pass u8, which is the return type
of readb, inb etc.

For device register offsets adopt unsigned int, as it is suitable for
adding to base addresses.

Pass the NCR5380_hostdata pointer to the board-specific routines instead
of the Scsi_Host pointer. The board-specific code is concerned with
hardware and not with SCSI protocol or the mid-layer.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08 17:29:48 -05:00

56 lines
1.5 KiB
C

/*
* Generic Generic NCR5380 driver defines
*
* Copyright 1993, Drew Eckhardt
* Visionary Computing
* (Unix and Linux consulting and custom programming)
* drew@colorado.edu
* +1 (303) 440-4894
*
* NCR53C400 extensions (c) 1994,1995,1996, Kevin Lentin
* K.Lentin@cs.monash.edu.au
*/
#ifndef GENERIC_NCR5380_H
#define GENERIC_NCR5380_H
#define DRV_MODULE_NAME "g_NCR5380"
#define NCR5380_read(reg) \
ioread8(hostdata->io + hostdata->offset + (reg))
#define NCR5380_write(reg, value) \
iowrite8(value, hostdata->io + hostdata->offset + (reg))
#define NCR5380_implementation_fields \
int offset; \
int c400_ctl_status; \
int c400_blk_cnt; \
int c400_host_buf; \
int io_width;
#define NCR53C400_mem_base 0x3880
#define NCR53C400_host_buffer 0x3900
#define NCR53C400_region_size 0x3a00
#define NCR5380_dma_xfer_len(instance, cmd, phase) \
generic_NCR5380_dma_xfer_len(instance, cmd)
#define NCR5380_dma_recv_setup generic_NCR5380_pread
#define NCR5380_dma_send_setup generic_NCR5380_pwrite
#define NCR5380_dma_residual(instance) (0)
#define NCR5380_intr generic_NCR5380_intr
#define NCR5380_queue_command generic_NCR5380_queue_command
#define NCR5380_abort generic_NCR5380_abort
#define NCR5380_bus_reset generic_NCR5380_bus_reset
#define NCR5380_info generic_NCR5380_info
#define NCR5380_io_delay(x) udelay(x)
#define BOARD_NCR5380 0
#define BOARD_NCR53C400 1
#define BOARD_NCR53C400A 2
#define BOARD_DTC3181E 3
#define BOARD_HP_C2502 4
#endif /* GENERIC_NCR5380_H */