iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
61f7223bf1
linux/drivers/usb/dwc2
History
Gregory Herrero 61f7223bf1 usb: dwc2: gadget: exit hibernation before power down 
When disconnecting cable, controller will detect a suspend condition
and enter partial power down. If vbus_session is called by the phy
driver during hibernation, make sure controller exit hibernation
before it is accessed.

Signed-off-by: Jianqiang Tang <jianqiang.tang@intel.com>
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Tested-by: Robert Baldyga <r.baldyga@samsung.com>
Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Tested-by: John Youn <johnyoun@synopsys.com>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-01 12:40:27 -05:00
..
core_intr.c usb: dwc2: host: ignore wakeup interrupt if hibernation supported 2015-10-01 12:40:16 -05:00
core.c usb: dwc2: host: clear pending interrupts prior hibernation 2015-10-01 12:40:17 -05:00
core.h usb: dwc2: gadget: only reset core after addressed state 2015-10-01 12:40:26 -05:00
debug.h usb: dwc2: move debugfs code to a separate file 2015-04-29 15:18:25 -05:00
debugfs.c usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
gadget.c usb: dwc2: gadget: exit hibernation before power down 2015-10-01 12:40:27 -05:00
hcd_ddma.c usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
hcd_intr.c usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
hcd_queue.c usb: dwc2: host: use correct frame number during qh init 2015-10-01 12:40:18 -05:00
hcd.c usb: dwc2: gadget: kill ep0 requests before reinitializing core 2015-10-01 12:40:26 -05:00
hcd.h usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
hw.h usb: dwc2: gadget: replace constants with defines 2015-01-30 10:34:11 -06:00
Kconfig usb: dwc2: remove dwc2_platform.ko 2015-04-29 15:20:11 -05:00
Makefile usb: dwc2: remove dwc2_platform.ko 2015-04-29 15:20:11 -05:00
pci.c usb: dwc2: pci: Add device mode to the dwc2-pci driver 2015-03-11 15:08:17 -05:00
platform.c usb: dwc2: force dr_mode in case of configuration mismatch 2015-10-01 12:40:23 -05:00