Filipe Manana 654c19a7e8 btrfs: fix lockdep splat when enabling and disabling qgroups
commit a855fbe69229078cd8aecd8974fb996a5ca651e6 upstream

When running test case btrfs/017 from fstests, lockdep reported the
following splat:

  [ 1297.067385] ======================================================
  [ 1297.067708] WARNING: possible circular locking dependency detected
  [ 1297.068022] 5.10.0-rc4-btrfs-next-73 #1 Not tainted
  [ 1297.068322] ------------------------------------------------------
  [ 1297.068629] btrfs/189080 is trying to acquire lock:
  [ 1297.068929] ffff9f2725731690 (sb_internal#2){.+.+}-{0:0}, at: btrfs_quota_enable+0xaf/0xa70 [btrfs]
  [ 1297.069274]
		 but task is already holding lock:
  [ 1297.069868] ffff9f2702b61a08 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_enable+0x3b/0xa70 [btrfs]
  [ 1297.070219]
		 which lock already depends on the new lock.

  [ 1297.071131]
		 the existing dependency chain (in reverse order) is:
  [ 1297.071721]
		 -> #1 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}:
  [ 1297.072375]        lock_acquire+0xd8/0x490
  [ 1297.072710]        __mutex_lock+0xa3/0xb30
  [ 1297.073061]        btrfs_qgroup_inherit+0x59/0x6a0 [btrfs]
  [ 1297.073421]        create_subvol+0x194/0x990 [btrfs]
  [ 1297.073780]        btrfs_mksubvol+0x3fb/0x4a0 [btrfs]
  [ 1297.074133]        __btrfs_ioctl_snap_create+0x119/0x1a0 [btrfs]
  [ 1297.074498]        btrfs_ioctl_snap_create+0x58/0x80 [btrfs]
  [ 1297.074872]        btrfs_ioctl+0x1a90/0x36f0 [btrfs]
  [ 1297.075245]        __x64_sys_ioctl+0x83/0xb0
  [ 1297.075617]        do_syscall_64+0x33/0x80
  [ 1297.075993]        entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [ 1297.076380]
		 -> #0 (sb_internal#2){.+.+}-{0:0}:
  [ 1297.077166]        check_prev_add+0x91/0xc60
  [ 1297.077572]        __lock_acquire+0x1740/0x3110
  [ 1297.077984]        lock_acquire+0xd8/0x490
  [ 1297.078411]        start_transaction+0x3c5/0x760 [btrfs]
  [ 1297.078853]        btrfs_quota_enable+0xaf/0xa70 [btrfs]
  [ 1297.079323]        btrfs_ioctl+0x2c60/0x36f0 [btrfs]
  [ 1297.079789]        __x64_sys_ioctl+0x83/0xb0
  [ 1297.080232]        do_syscall_64+0x33/0x80
  [ 1297.080680]        entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [ 1297.081139]
		 other info that might help us debug this:

  [ 1297.082536]  Possible unsafe locking scenario:

  [ 1297.083510]        CPU0                    CPU1
  [ 1297.084005]        ----                    ----
  [ 1297.084500]   lock(&fs_info->qgroup_ioctl_lock);
  [ 1297.084994]                                lock(sb_internal#2);
  [ 1297.085485]                                lock(&fs_info->qgroup_ioctl_lock);
  [ 1297.085974]   lock(sb_internal#2);
  [ 1297.086454]
		  *** DEADLOCK ***
  [ 1297.087880] 3 locks held by btrfs/189080:
  [ 1297.088324]  #0: ffff9f2725731470 (sb_writers#14){.+.+}-{0:0}, at: btrfs_ioctl+0xa73/0x36f0 [btrfs]
  [ 1297.088799]  #1: ffff9f2702b60cc0 (&fs_info->subvol_sem){++++}-{3:3}, at: btrfs_ioctl+0x1f4d/0x36f0 [btrfs]
  [ 1297.089284]  #2: ffff9f2702b61a08 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_enable+0x3b/0xa70 [btrfs]
  [ 1297.089771]
		 stack backtrace:
  [ 1297.090662] CPU: 5 PID: 189080 Comm: btrfs Not tainted 5.10.0-rc4-btrfs-next-73 #1
  [ 1297.091132] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  [ 1297.092123] Call Trace:
  [ 1297.092629]  dump_stack+0x8d/0xb5
  [ 1297.093115]  check_noncircular+0xff/0x110
  [ 1297.093596]  check_prev_add+0x91/0xc60
  [ 1297.094076]  ? kvm_clock_read+0x14/0x30
  [ 1297.094553]  ? kvm_sched_clock_read+0x5/0x10
  [ 1297.095029]  __lock_acquire+0x1740/0x3110
  [ 1297.095510]  lock_acquire+0xd8/0x490
  [ 1297.095993]  ? btrfs_quota_enable+0xaf/0xa70 [btrfs]
  [ 1297.096476]  start_transaction+0x3c5/0x760 [btrfs]
  [ 1297.096962]  ? btrfs_quota_enable+0xaf/0xa70 [btrfs]
  [ 1297.097451]  btrfs_quota_enable+0xaf/0xa70 [btrfs]
  [ 1297.097941]  ? btrfs_ioctl+0x1f4d/0x36f0 [btrfs]
  [ 1297.098429]  btrfs_ioctl+0x2c60/0x36f0 [btrfs]
  [ 1297.098904]  ? do_user_addr_fault+0x20c/0x430
  [ 1297.099382]  ? kvm_clock_read+0x14/0x30
  [ 1297.099854]  ? kvm_sched_clock_read+0x5/0x10
  [ 1297.100328]  ? sched_clock+0x5/0x10
  [ 1297.100801]  ? sched_clock_cpu+0x12/0x180
  [ 1297.101272]  ? __x64_sys_ioctl+0x83/0xb0
  [ 1297.101739]  __x64_sys_ioctl+0x83/0xb0
  [ 1297.102207]  do_syscall_64+0x33/0x80
  [ 1297.102673]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [ 1297.103148] RIP: 0033:0x7f773ff65d87

This is because during the quota enable ioctl we lock first the mutex
qgroup_ioctl_lock and then start a transaction, and starting a transaction
acquires a fs freeze semaphore (at the VFS level). However, every other
code path, except for the quota disable ioctl path, we do the opposite:
we start a transaction and then lock the mutex.

So fix this by making the quota enable and disable paths to start the
transaction without having the mutex locked, and then, after starting the
transaction, lock the mutex and check if some other task already enabled
or disabled the quotas, bailing with success if that was the case.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>

 Conflicts:
	fs/btrfs/qgroup.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-15 13:08:05 +02:00
2021-06-30 08:47:44 -04:00
2019-09-22 10:34:46 -07:00
2019-11-10 13:41:59 -08:00
2021-08-12 13:21:05 +02:00

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.
Description
No description provided
Readme 5.7 GiB
Languages
C 97.6%
Assembly 1%
Shell 0.5%
Python 0.3%
Makefile 0.3%