iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/mach-omap2
History
Benoit Cousson 659fa8222c OMAP4: hwmod data: Fix missing address in DMM and EMIF_FW 
The DMM is a piece of interconnect that need to be configured properly
for the tiler functionnality. It thus exposes some configuration registers
that were missing previously.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-12-21 21:08:34 -07:00
..
include/mach
omap2+: Initialize omap_irq_base for entry-macro.S from platform code
2010-12-10 09:42:51 -08:00
board-2430sdp.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-3430sdp.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-3630sdp.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-4430sdp.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-am3517crane.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-am3517evm.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-apollon.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-cm-t35.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-cm-t3517.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-devkit8000.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-flash.c
OMAP2plus: Fix static function warnings
2010-10-08 10:02:49 -07:00
board-flash.h
OMAP2plus: Fix static function warnings
2010-10-08 10:02:49 -07:00
board-generic.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-h4.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-igep0020.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-igep0030.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-ldp.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-n8x0.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-omap3beagle.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-omap3evm.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-omap3logic.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-omap3pandora.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-omap3stalker.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-omap3touchbook.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-omap4panda.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-overo.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-rm680.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-rx51-peripherals.c
omap: rx51: Switch rx51_tpa6130a2_data __initdata to__initdata_or_module
2010-12-20 18:48:16 -08:00
board-rx51-video.c
Added video data to support tvout on rx51
2010-12-20 18:48:16 -08:00
board-rx51.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
board-zoom-debugboard.c
OMAP2plus: Fix static function warnings
2010-10-08 10:02:49 -07:00
board-zoom-peripherals.c
omap: kill all section mismatch warning for omap2plus_defconfig
2010-12-17 17:25:26 -08:00
board-zoom.c
OMAP2+: io: split omap2_init_common_hw()
2010-12-21 19:55:11 -07:00
clkt2xxx_apll.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
clkt2xxx_dpllcore.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
clkt2xxx_osc.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
clkt2xxx_sys.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
clkt2xxx_virt_prcm_set.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
clkt34xx_dpll3m2.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clkt_clksel.c
OMAP2+ clock: clean up clkt_clksel.c
2010-05-20 12:31:06 -06:00
clkt_dpll.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
clock2xxx.c
OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code
2010-02-24 17:45:15 -07:00
clock2xxx.h
OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files
2010-02-24 12:29:42 -07:00
clock3xxx_data.c
OMAP3: clock: clarify usage of struct clksel_rate.flags and struct omap_clk.cpu
2010-12-21 21:08:14 -07:00
clock3xxx.c
OMAP3: clock: fix incorrect rate display when switching MPU rate at boot
2010-12-21 21:08:14 -07:00
clock3xxx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock34xx.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
clock34xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock36xx.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock36xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock44xx_data.c
OMAP4: clock data: Export control to enable/disable CORE/PER M3 clocks
2010-12-21 21:08:14 -07:00
clock44xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock2420_data.c
OMAP2xxx clock: fix dss2_fck recalc to use clksel
2010-12-21 21:08:14 -07:00
clock2430_data.c
OMAP2xxx clock: fix dss2_fck recalc to use clksel
2010-12-21 21:08:14 -07:00
clock2430.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
clock3517.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
clock3517.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock_common_data.c
OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality
2010-05-20 12:31:07 -06:00
clock.c
OMAP2+: clockdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:15 -07:00
clock.h
OMAP2+ clock: clean up clkt_clksel.c
2010-05-20 12:31:06 -06:00
clockdomain.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
clockdomain.h
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
clockdomains2xxx_3xxx_data.c
OMAP2+: clockdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:15 -07:00
clockdomains44xx_data.c
OMAP2+: clockdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:15 -07:00
cm1_44xx.h
OMAP4: CM instances: add clockdomain register offsets
2010-12-21 21:05:15 -07:00
cm2_44xx.h
OMAP4: CM instances: add clockdomain register offsets
2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.c
OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses
2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.h
OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses
2010-12-21 21:05:15 -07:00
cm44xx.c
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
2010-12-21 21:05:14 -07:00
cm44xx.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
cm-regbits-24xx.h
OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses
2010-12-21 21:05:15 -07:00
cm-regbits-34xx.h
OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support
2010-12-21 21:05:15 -07:00
cm-regbits-44xx.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
cm.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
cminst44xx.c
OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support
2010-12-21 21:05:15 -07:00
cminst44xx.h
OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support
2010-12-21 21:05:15 -07:00
common.c
OMAP: control: move plat-omap/control.h to mach-omap2/control.h
2010-10-08 11:40:20 -06:00
control.c
OMAP3: control/PM: move padconf save code to mach-omap2/control.c
2010-12-21 21:05:16 -07:00
control.h
OMAP3: control/PM: move padconf save code to mach-omap2/control.c
2010-12-21 21:05:16 -07:00
cpuidle34xx.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
devices.c
OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism
2010-12-21 19:57:40 -07:00
dma.c
OMAP: DMA: Convert DMA library into platform driver
2010-12-20 18:38:31 -08:00
dpll3xxx.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
dsp.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
emu.c
omap2/3: Fix initcalls for multi-omap
2010-02-15 09:27:05 -08:00
gpio.c
OMAP2+: GPIO: device registration
2010-12-07 16:26:57 -08:00
gpmc-nand.c
omap3 nand: cleanup virtual address usages
2010-08-02 15:30:38 +03:00
gpmc-onenand.c
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
gpmc-smc91x.c
omap: use smc91x_platdata to setup smc91x
2009-12-11 16:16:33 -08:00
gpmc-smsc911x.c
ARM: OMAP3LOGIC: Add generic smsc911x support when connected to GPMC
2010-09-28 11:39:18 -07:00
gpmc.c
omap3 nand: cleanup virtual address usages
2010-08-02 15:30:38 +03:00
hsmmc.c
OMAP: control: move plat-omap/control.h to mach-omap2/control.h
2010-10-08 11:40:20 -06:00
hsmmc.h
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2010-10-25 13:46:56 -07:00
i2c.c
omap: mux: Convert 2420 platform init code to use new mux code
2010-07-05 16:31:40 +03:00
id.c
OMAP: control: move plat-omap/control.h to mach-omap2/control.h
2010-10-08 11:40:20 -06:00
io.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
io.h
OMAP: plat-omap: Fix static function warnings
2010-10-08 10:12:38 -07:00
iommu2.c
omap iommu: move iommu_disable at fault to the above layer
2010-06-29 07:55:07 +03:00
irq.c
OMAP3: add comments for erratas i540 and i478 workarounds
2010-12-17 16:48:20 -08:00
Kconfig
omap4: opp: add OPP table data
2010-12-21 14:30:40 -08:00
mailbox.c
OMAP: mailbox: fix detection for previously supported chips
2010-12-02 05:43:16 -06:00
Makefile
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
2010-12-21 21:05:14 -07:00
Makefile.boot
…
mcbsp.c
OMAP: McBSP: Remove null omap44xx ops comment
2010-10-08 11:40:21 -06:00
mux34xx.c
OMAP: mux: Add __func__ macro to pr_xxx macros
2010-11-17 12:01:54 +01:00
mux34xx.h
omap: mux: Add 36xx CBP package support
2009-12-11 16:16:33 -08:00
mux44xx.c
OMAP: mux: Add __func__ macro to pr_xxx macros
2010-11-17 12:01:54 +01:00
mux44xx.h
OMAP4: mux: Add CBS package data for OMAP4430 ES2
2010-11-17 12:01:52 +01:00
mux2420.c
OMAP: mux: Add __func__ macro to pr_xxx macros
2010-11-17 12:01:54 +01:00
mux2420.h
omap: mux: Add data for 2420
2010-07-05 16:31:36 +03:00
mux2430.c
OMAP: mux: Add __func__ macro to pr_xxx macros
2010-11-17 12:01:54 +01:00
mux2430.h
omap: mux: Add data for 2430
2010-07-05 16:31:36 +03:00
mux.c
OMAP: mux: Add __func__ macro to pr_xxx macros
2010-11-17 12:01:54 +01:00
mux.h
arm: mach-omap2: remove NULL board_mux from board files
2010-12-02 17:03:41 -08:00
omap4-common.c
omap4: l2x0: Enable early BRESP bit
2010-12-18 09:33:01 -08:00
omap44xx-smc.S
omap4: Add smc API to read AuxCoreBoot0 register
2010-08-02 13:18:18 +03:00
omap_hwmod_3xxx_data.c
OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism
2010-12-21 19:57:40 -07:00
omap_hwmod_44xx_data.c
OMAP4: hwmod data: Fix missing address in DMM and EMIF_FW
2010-12-21 21:08:34 -07:00
omap_hwmod_2420_data.c
OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism
2010-12-21 19:57:40 -07:00
omap_hwmod_2430_data.c
OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism
2010-12-21 19:57:40 -07:00
omap_hwmod_common_data.c
OMAP: hwmod data: add class for IVA hwmods
2010-07-26 16:34:31 -06:00
omap_hwmod_common_data.h
OMAP: hwmod data: add class for IVA hwmods
2010-07-26 16:34:31 -06:00
omap_hwmod.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
omap_opp_data.h
omap: opp: add OMAP3 OPP table data and common init
2010-12-21 14:30:40 -08:00
omap-headsmp.S
omap4: Add smc API to read AuxCoreBoot0 register
2010-08-02 13:18:18 +03:00
omap-hotplug.c
omap4: hotplug: Add basic CPU hotplug support
2010-08-02 13:18:19 +03:00
omap-iommu.c
OMAP: iommu: make iva2 iommu selectable
2010-12-15 11:33:31 -06:00
omap-smp.c
omap: Fix sev instruction usage for multi-omap
2010-08-16 09:22:04 +03:00
opp2xxx.h
omap2/3: Multiboot compile fixes to compile in omap2 and omap3
2010-02-15 09:26:55 -08:00
opp3xxx_data.c
omap: opp: add OMAP3 OPP table data and common init
2010-12-21 14:30:40 -08:00
opp4xxx_data.c
omap4: opp: add OPP table data
2010-12-21 14:30:40 -08:00
opp2420_data.c
OMAP2xxx OPP: clean up comments in OPP data
2010-01-08 15:23:15 -07:00
opp2430_data.c
OMAP2xxx OPP: clean up comments in OPP data
2010-01-08 15:23:15 -07:00
opp.c
omap: opp: add OMAP3 OPP table data and common init
2010-12-21 14:30:40 -08:00
pm24xx.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
pm34xx.c
OMAP3: control/PM: move padconf save code to mach-omap2/control.c
2010-12-21 21:05:16 -07:00
pm44xx.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
pm_bus.c
OMAP2+: PM: initial runtime PM core support
2010-09-21 11:51:23 -07:00
pm-debug.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
pm.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
pm.h
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomain2xxx_3xxx.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomain44xx.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomain-common.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomain.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomain.h
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomains2xxx_3xxx_data.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomains2xxx_3xxx_data.h
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomains2xxx_data.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomains3xxx_data.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomains44xx_data.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
prcm44xx.h
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
2010-12-21 21:05:14 -07:00
prcm_mpu44xx.c
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
2010-12-21 21:05:14 -07:00
prcm_mpu44xx.h
OMAP4: CM instances: add clockdomain register offsets
2010-12-21 21:05:15 -07:00
prcm-common.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
prcm.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
prm2xxx_3xxx.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
prm2xxx_3xxx.h
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
prm44xx.c
OMAP4: PRCM: move global reset function for OMAP4 to an OMAP4-specific file
2010-12-21 21:05:14 -07:00
prm44xx.h
OMAP4: CM instances: add clockdomain register offsets
2010-12-21 21:05:15 -07:00
prm-regbits-24xx.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
prm-regbits-34xx.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
prm-regbits-44xx.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
prm.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
prminst44xx.c
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
2010-12-21 21:05:14 -07:00
prminst44xx.h
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
2010-12-21 21:05:14 -07:00
scrm44xx.h
OMAP4: PRCM: Add SCRM header file
2010-12-21 20:01:54 -07:00
sdram-hynix-h8mbx00u0mer-0em.h
omap3: zoom: Introduce zoom3 board support
2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sdram-nokia.c
arm: omap: sdram-nokia: add 97.6/195.2 MHz timing data
2010-12-17 15:13:46 -08:00
sdram-nokia.h
arm: omap: add sdram-nokia.h
2010-12-17 15:13:44 -08:00
sdram-numonyx-m65kxxxxam.h
omap3: SDRC: add timing data for Numonyx M65KxxxxAM
2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sdrc2xxx.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
sdrc.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
sdrc.h
OMAP2+: use global values for the SRAM PA addresses
2010-12-21 14:45:56 -08:00
serial.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
sleep24xx.S
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sleep34xx.S
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
sram34xx.S
OMAP2/3: SRAM: add comment about crashes during a TLB miss
2010-12-21 21:08:14 -07:00
sram242x.S
OMAP2/3: SRAM: add comment about crashes during a TLB miss
2010-12-21 21:08:14 -07:00
sram243x.S
OMAP2/3: SRAM: add comment about crashes during a TLB miss
2010-12-21 21:08:14 -07:00
timer-gp.c
arm: omap2: timer-gp: delete unused variable
2010-11-24 16:49:42 -08:00
timer-gp.h
OMAP2plus: Fix static function warnings
2010-10-08 10:02:49 -07:00
timer-mpu.c
omap4: Use irq line defines from irq-44xx.h
2010-02-23 15:29:08 -08:00
usb-ehci.c
omap: mux: Remove old mux code
2010-07-05 16:31:40 +03:00
usb-fs.c
OMAP: control: move plat-omap/control.h to mach-omap2/control.h
2010-10-08 11:40:20 -06:00
usb-musb.c
USB: AM35x: Add musb support
2010-10-22 10:22:16 -07:00
usb-tusb6010.c
omap: mux: Convert 2420 platform init code to use new mux code
2010-07-05 16:31:40 +03:00
wd_timer.c
OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism
2010-12-21 19:57:40 -07:00
wd_timer.h
OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c
2010-12-21 19:56:17 -07:00