iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/powerpc/boot
History
Priyanka Jain 667680f684 powerpc/fsl-booke: Add initial T1042RDB_PI board support 
T1042RDB_PI is Freescale Reference Design Board supporting the T1042
QorIQ Power Architecture™ processor. T1042 is a reduced personality
of T1040 SoC without Integrated 8-port Gigabit. The board is designed
with low power features targeted for Printing Image Market.

T1042RDB_PI is  similar to T1040RDB board with few differences like
it has video interface, supports T1042 personality only

T1042RDB_PI board Overview
-----------------------
- SERDES Connections, 8 lanes supporting:
    	- PCI
    	- SATA 2.0
- DDR Controller
    	- Supports rates of up to 1600 MHz data-rate
    	- Supports one DDR3LP UDIMM
-IFC/Local Bus
    	- NAND flash: 1GB 8-bit NAND flash
    	- NOR: 128MB 16-bit NOR Flash
- Ethernet
    	- Two on-board RGMII 10/100/1G ethernet ports.
    	- PHY #0 remains powered up during deep-sleep
- CPLD
- Clocks
    	- System and DDR clock (SYSCLK, “DDRCLK”)
    	- SERDES clocks
- Power Supplies
- USB
    	- Supports two USB 2.0 ports with integrated PHYs
    	- Two type A ports with 5V@1.5A per port.
- SDHC
    	- SDHC/SDXC connector
- SPI
    	- On-board 64MB SPI flash
- I2C
    	- Device connected: EEPROM, thermal monitor, VID controller, RTC
- Other IO
    	- Two Serial ports
    	- ProfiBus port

Add support for T1042RDB_PI board:
    -add device tree
    -Add entry in corenet_generic.c, as it is similar to other corenet platforms

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-09-09 18:28:24 -05:00
..
dts
powerpc/fsl-booke: Add initial T1042RDB_PI board support
2014-09-09 18:28:24 -05:00
.gitignore
powerpc/boot: Ignore .dtb files.
2013-12-02 14:06:57 +11:00
4xx.c
powerpc/44x: Fix UART clocks on 440SPe
2010-05-12 07:48:49 -04:00
4xx.h
powerpc/405ex: provide necessary fixup function to support cuImage
2009-08-31 09:20:55 -04:00
44x.h
[POWERPC] cuimage for Bamboo board
2007-09-19 21:13:16 -05:00
addnote.c
powerpc/boot: Add 64bit and little endian support to addnote
2014-04-28 17:36:00 +10:00
bamboo.c
[POWERPC] Start removing linux,network-index in favour of aliases
2008-03-26 07:19:16 -05:00
cpm-serial.c
[POWERPC] cpm-serial: Relocate CPM buffer descriptors and SMC parameter ram.
2008-04-17 01:01:37 -05:00
crt0.S
powerpc/boot: Add support for 64bit little endian wrapper
2014-04-28 17:36:21 +10:00
crtsavres.S
[POWERPC] Fix bootwrapper builds with newer gcc versions
2008-06-16 15:00:52 +10:00
cuboot-8xx.c
[POWERPC] Use embedded libfdt in the bootwrapper
2007-12-11 13:46:14 +11:00
cuboot-52xx.c
powerpc/52xx: Make cuImage more robust in locating immr node.
2008-10-15 11:09:59 -06:00
cuboot-83xx.c
[POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_alias
2008-01-23 19:32:47 -06:00
cuboot-85xx-cpm2.c
[POWERPC] Add a cuboot wrapper for 85xx with CPM2
2008-01-27 14:10:36 -06:00
cuboot-85xx.c
powerpc/85xx: cuboot - Fix up ethernet3 MAC address on MPC85xx
2009-06-15 21:45:32 -05:00
cuboot-824x.c
[POWERPC] Add initial iomega StorCenter board port.
2008-01-23 19:54:36 -06:00
cuboot-acadia.c
powerpc/40x: Add cuboot wrapper for Acadia board
2008-10-17 10:31:19 -04:00
cuboot-amigaone.c
powerpc/amigaone: Bootwrapper and serial console support for AmigaOne
2009-02-11 16:00:09 +11:00
cuboot-bamboo.c
[POWERPC] 4xx: Use correct board info structure in cuboot wrappers
2008-02-28 08:16:27 -06:00
cuboot-c2k.c
powerpc: Boot code for the C2K
2008-06-09 13:42:25 +10:00
cuboot-ebony.c
[POWERPC] 4xx: Use correct board info structure in cuboot wrappers
2008-02-28 08:16:27 -06:00
cuboot-hotfoot.c
powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC
2009-08-31 09:15:51 -04:00
cuboot-katmai.c
[POWERPC] 4xx: Use correct board info structure in cuboot wrappers
2008-02-28 08:16:27 -06:00
cuboot-kilauea.c
powerpc/405ex: support cuImage via included dtb
2009-08-31 09:23:22 -04:00
cuboot-mpc7448hpc2.c
[POWERPC] bootwrapper: Build multiple cuImages
2008-02-07 11:40:19 +11:00
cuboot-pq2.c
[POWERPC] cuboot-pq2: PCI fixes
2008-04-17 01:01:40 -05:00
cuboot-rainier.c
[POWERPC] Start removing linux,network-index in favour of aliases
2008-03-26 07:19:16 -05:00
cuboot-sam440ep.c
powerpc/4xx: Sam440ep support
2008-06-11 08:32:49 -04:00
cuboot-sequoia.c
[POWERPC] Start removing linux,network-index in favour of aliases
2008-03-26 07:19:16 -05:00
cuboot-taishan.c
[POWERPC] Start removing linux,network-index in favour of aliases
2008-03-26 07:19:16 -05:00
cuboot-warp.c
powerpc/44x: Warp patches for the new NDFC driver
2009-01-20 08:17:21 -05:00
cuboot-yosemite.c
[POWERPC] 4xx: Add bootwrapper for AMCC Yosemite board
2008-03-26 07:19:17 -05:00
cuboot.c
[POWERPC] bootwrapper: Move linker symbols into ops.h
2007-08-22 15:27:28 +10:00
cuboot.h
[POWERPC] Consolidate cuboot initialization code
2007-06-14 22:30:16 +10:00
dcr.h
IBM Akebono: Add the Akebono platform
2014-05-01 08:26:26 +10:00
devtree.c
powerpc/bootwrapper: Use the child-bus #address-cells to decide which range entry to use
2008-12-21 14:21:17 +11:00
div64.S
powerpc/boot: Add extended precision shifts to the boot wrapper.
2011-12-09 07:49:27 -05:00
dummy.c
…
ebony.c
[POWERPC] Start removing linux,network-index in favour of aliases
2008-03-26 07:19:16 -05:00
elf_util.c
powerpc/boot: Add little endian support to elf utils
2014-04-28 17:36:04 +10:00
elf.h
…
ep88xc.c
[POWERPC] Use embedded libfdt in the bootwrapper
2007-12-11 13:46:14 +11:00
ep405.c
[POWERPC] 4xx: EP405 boards support for arch/powerpc
2007-12-23 13:13:14 -06:00
ep8248e.c
[POWERPC] 82xx: Embedded Planet EP8248E support
2008-01-23 19:34:43 -06:00
epapr-wrapper.c
powerpc/zImage: make the "OF" wrapper support ePAPR boot
2013-09-25 14:18:44 +10:00
epapr.c
powerpc/zImage: make the "OF" wrapper support ePAPR boot
2013-09-25 14:18:44 +10:00
fixed-head.S
[POWERPC] 8xx/wrapper: Embedded Planet EP88xC support
2007-10-04 11:02:40 -05:00
fsl-soc.c
[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.
2007-10-03 20:36:35 -05:00
fsl-soc.h
[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.
2007-10-03 20:36:35 -05:00
gamecube-head.S
powerpc: gamecube: bootwrapper bits
2009-12-12 22:24:26 -07:00
gamecube.c
powerpc: gamecube: bootwrapper bits
2009-12-12 22:24:26 -07:00
gunzip_util.c
[POWERPC] boot: Simplify gunzip_finish
2007-10-03 11:48:43 +10:00
gunzip_util.h
…
hack-coff.c
…
holly.c
[POWERPC] Use embedded libfdt in the bootwrapper
2007-12-11 13:46:14 +11:00
install.sh
kbuild: use INSTALLKERNEL to select customized installkernel script
2009-09-20 12:18:14 +02:00
io.h
powerpc: Move include files to arch/powerpc/include/asm
2008-08-04 12:02:00 +10:00
libfdt_env.h
powerpc: Update in-kernel dtc and libfdt to version 1.2.0
2008-08-20 16:34:58 +10:00
libfdt-wrapper.c
powerpc/boot: Allocate more memory for dtb
2008-11-06 09:49:43 +11:00
main.c
powerpc: Rename duplicate COMMAND_LINE_SIZE define
2014-04-28 16:31:54 +10:00
Makefile
Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
2014-06-12 21:23:38 -07:00
mktree.c
powerpc: use consistent types in mktree
2009-08-20 10:29:30 +10:00
mpc8xx.c
[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.
2007-10-03 20:36:35 -05:00
mpc8xx.h
[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.
2007-10-03 20:36:35 -05:00
mpc52xx-psc.c
[POWERPC] Add bootwrapper function to get virtual reg from the device tree.
2008-04-17 01:01:37 -05:00
mpsc.c
[POWERPC] prpmc2800: Clean up dts properties
2008-04-15 21:21:24 +10:00
mv64x60_i2c.c
[POWERPC] mv64x60: Remove device tree absolute path references
2008-04-15 21:21:24 +10:00
mv64x60.c
[POWERPC] mv64x60: Remove device tree absolute path references
2008-04-15 21:21:24 +10:00
mv64x60.h
[POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge
2007-05-12 11:32:49 +10:00
mvme5100.c
powerpc/embedded6xx: Add support for Motorola/Emerson MVME5100
2014-01-09 17:52:20 -06:00
ns16550.c
[POWERPC] Xilinx: boot support for Xilinx uart 16550.
2008-04-24 13:32:46 -05:00
of.c
powerpc/boot: Rework of_claim() to make it 64bit friendly
2014-04-28 17:35:43 +10:00
of.h
powerpc/boot: Define byteswapping routines for little endian
2014-04-28 17:35:56 +10:00
ofconsole.c
powerpc/boot: Add byteswapping routines in oflib
2014-04-28 17:35:35 +10:00
oflib.c
powerpc/boot: Define a routine to enter prom
2014-04-28 17:36:08 +10:00
ops.h
powerpc: Bump BOOT_COMMAND_LINE_SIZE to 2048
2014-04-28 16:32:02 +10:00
page.h
…
planetcore.c
[POWERPC] bootwrapper: Add PlanetCore firmware support
2007-10-03 11:48:43 +10:00
planetcore.h
[POWERPC] bootwrapper: Add PlanetCore firmware support
2007-10-03 11:48:43 +10:00
ppc_asm.h
powerpc/boot: Add support for 64bit little endian wrapper
2014-04-28 17:36:21 +10:00
ppcboot-hotfoot.h
powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC
2009-08-31 09:15:51 -04:00
ppcboot.h
[POWERPC] bootwrapper: Add TARGET_HAS_ETHn tests to ppcboot.h
2007-08-22 15:21:48 +10:00
pq2.c
[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.
2007-10-03 20:36:35 -05:00
pq2.h
[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.
2007-10-03 20:36:35 -05:00
prpmc2800.c
[POWERPC] mv64x60: Remove device tree absolute path references
2008-04-15 21:21:24 +10:00
ps3-head.S
[POWERPC] PS3: Bootwrapper improvements
2008-04-01 20:43:07 +11:00
ps3-hvcall.S
[POWERPC] PS3: Fix bootwrapper hang bug
2008-02-14 22:11:01 +11:00
ps3.c
powerpc: Rename duplicate COMMAND_LINE_SIZE define
2014-04-28 16:31:54 +10:00
pseries-head.S
powerpc/boot: Add support for 64bit little endian wrapper
2014-04-28 17:36:21 +10:00
README
…
redboot-8xx.c
[POWERPC] 8xx: Analogue & Micro Adder875 board support.
2008-01-23 19:34:40 -06:00
redboot-83xx.c
[POWERPC] 83xx: Add support for Analogue & Micro ASP837E board
2008-06-02 14:44:25 -05:00
redboot.h
[POWERPC] 8xx: Analogue & Micro Adder875 board support.
2008-01-23 19:34:40 -06:00
reg.h
[POWERPC] 4xx: Add mfspr/mtspr inline macros to 4xx bootwrapper
2007-12-23 13:14:22 -06:00
rs6000.h
…
serial.c
powerpc/amigaone: Bootwrapper and serial console support for AmigaOne
2009-02-11 16:00:09 +11:00
simple_alloc.c
…
simpleboot.c
Move dtc and libfdt sources from arch/powerpc/boot to scripts/dtc
2009-05-02 16:52:26 -07:00
stdio.c
powerpc/boot: Fix do_div for 64bit wrapper
2014-04-28 17:35:22 +10:00
stdio.h
…
stdlib.c
[POWERPC] bootwrapper: Add strtoull()
2007-09-14 01:33:23 +10:00
stdlib.h
[POWERPC] bootwrapper: Add strtoull()
2007-09-14 01:33:23 +10:00
string.h
[POWERPC] Add memchr() to the bootwrapper
2007-10-12 14:13:44 +10:00
string.S
powerpc: Fix boot wrapper memcmp() called with zero length argument
2008-10-21 15:17:48 +11:00
swab.h
powerpc/boot: Define byteswapping routines for little endian
2014-04-28 17:35:56 +10:00
treeboot-akebono.c
powerpc: Added PCI MSI support using the HSTA module
2014-05-01 08:26:30 +10:00
treeboot-bamboo.c
[POWERPC] cuimage for Bamboo board
2007-09-19 21:13:16 -05:00
treeboot-currituck.c
powerpc/47x: Add support for the new IBM currituck platform
2011-12-09 07:51:40 -05:00
treeboot-ebony.c
[POWERPC] bootwrapper: Move linker symbols into ops.h
2007-08-22 15:27:28 +10:00
treeboot-iss4xx.c
powerpc/44x: boot wrapper: allow kernel to load into non-zero address
2011-07-12 09:34:41 -04:00
treeboot-walnut.c
[POWERPC] Start removing linux,network-index in favour of aliases
2008-03-26 07:19:16 -05:00
types.h
[POWERPC] Add signed types to bootwrapper
2007-06-28 19:16:47 +10:00
uartlite.c
[POWERPC] Uartlite: bootwrapper bug fix, getc loops forever
2007-10-10 09:14:35 -06:00
ugecon.c
powerpc/gamecube/wii: Fix off-by-one error in ugecon/usbgecko_udbg
2009-12-18 15:13:57 +11:00
ugecon.h
powerpc: gamecube/wii: usbgecko bootwrapper console support
2009-12-12 22:24:26 -07:00
util.S
powerpc: No need to use dot symbols when branching to a function
2014-04-23 10:05:16 +10:00
virtex405-head.S
[POWERPC] bootwrapper: Add a firmware-independent simpleboot target.
2008-04-02 20:36:11 -05:00
virtex.c
powerpc/virtex: Fix booting of Xilinx FPGAs with 16550 for 405 and 440
2008-07-04 00:58:59 -06:00
wii-head.S
powerpc: wii: bootwrapper bits
2009-12-12 22:24:29 -07:00
wii.c
wii: bootwrapper: add fixup to calc useable mem2
2009-12-12 22:24:31 -07:00
wrapper
IBM Akebono: Add the Akebono platform
2014-05-01 08:26:26 +10:00
zImage.coff.lds.S
powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN
2011-04-20 16:59:20 +10:00
zImage.lds.S
powerpc/boot: Add support for 64bit little endian wrapper
2014-04-28 17:36:21 +10:00
zImage.ps3.lds.S
[POWERPC] PS3: Bootwrapper support.
2007-07-10 21:56:40 +10:00

README 

To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary:

objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz
objcopy -j .kernel:System.map -O binary zImage System.map.gz
objcopy -j .kernel:.config -O binary zImage config.gz
objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz


	Peter