2f81b51d0d
Use the newer .apply function of pwm_ops instead of .config, .enable, .disable and .set_polarity. This guarantees atomic changes of the pwm controller configuration. It also reduces the size of the driver. Since now period is a 64 bit value, add an extra check to reject periods that exceed the possible max value for the 32 bit register. This has been tested on a Raspberry PI 4. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
188 lines
4.4 KiB
C
188 lines
4.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright 2014 Bart Tanghe <bart.tanghe@thomasmore.be>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
|
|
#define PWM_CONTROL 0x000
|
|
#define PWM_CONTROL_SHIFT(x) ((x) * 8)
|
|
#define PWM_CONTROL_MASK 0xff
|
|
#define PWM_MODE 0x80 /* set timer in PWM mode */
|
|
#define PWM_ENABLE (1 << 0)
|
|
#define PWM_POLARITY (1 << 4)
|
|
|
|
#define PERIOD(x) (((x) * 0x10) + 0x10)
|
|
#define DUTY(x) (((x) * 0x10) + 0x14)
|
|
|
|
#define PERIOD_MIN 0x2
|
|
|
|
struct bcm2835_pwm {
|
|
struct pwm_chip chip;
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
};
|
|
|
|
static inline struct bcm2835_pwm *to_bcm2835_pwm(struct pwm_chip *chip)
|
|
{
|
|
return container_of(chip, struct bcm2835_pwm, chip);
|
|
}
|
|
|
|
static int bcm2835_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
|
|
u32 value;
|
|
|
|
value = readl(pc->base + PWM_CONTROL);
|
|
value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm));
|
|
value |= (PWM_MODE << PWM_CONTROL_SHIFT(pwm->hwpwm));
|
|
writel(value, pc->base + PWM_CONTROL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bcm2835_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
|
|
u32 value;
|
|
|
|
value = readl(pc->base + PWM_CONTROL);
|
|
value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm));
|
|
writel(value, pc->base + PWM_CONTROL);
|
|
}
|
|
|
|
static int bcm2835_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
|
|
struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
|
|
unsigned long rate = clk_get_rate(pc->clk);
|
|
unsigned long long period;
|
|
unsigned long scaler;
|
|
u32 val;
|
|
|
|
if (!rate) {
|
|
dev_err(pc->dev, "failed to get clock rate\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
scaler = DIV_ROUND_CLOSEST(NSEC_PER_SEC, rate);
|
|
/* set period */
|
|
period = DIV_ROUND_CLOSEST_ULL(state->period, scaler);
|
|
|
|
/* dont accept a period that is too small or has been truncated */
|
|
if ((period < PERIOD_MIN) || (period > U32_MAX))
|
|
return -EINVAL;
|
|
|
|
writel(period, pc->base + PERIOD(pwm->hwpwm));
|
|
|
|
/* set duty cycle */
|
|
val = DIV_ROUND_CLOSEST_ULL(state->duty_cycle, scaler);
|
|
writel(val, pc->base + DUTY(pwm->hwpwm));
|
|
|
|
/* set polarity */
|
|
val = readl(pc->base + PWM_CONTROL);
|
|
|
|
if (state->polarity == PWM_POLARITY_NORMAL)
|
|
val &= ~(PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm));
|
|
else
|
|
val |= PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm);
|
|
|
|
/* enable/disable */
|
|
if (state->enabled)
|
|
val |= PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm);
|
|
else
|
|
val &= ~(PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm));
|
|
|
|
writel(val, pc->base + PWM_CONTROL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops bcm2835_pwm_ops = {
|
|
.request = bcm2835_pwm_request,
|
|
.free = bcm2835_pwm_free,
|
|
.apply = bcm2835_pwm_apply,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int bcm2835_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct bcm2835_pwm *pc;
|
|
int ret;
|
|
|
|
pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
|
|
if (!pc)
|
|
return -ENOMEM;
|
|
|
|
pc->dev = &pdev->dev;
|
|
|
|
pc->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(pc->base))
|
|
return PTR_ERR(pc->base);
|
|
|
|
pc->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(pc->clk))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk),
|
|
"clock not found\n");
|
|
|
|
ret = clk_prepare_enable(pc->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pc->chip.dev = &pdev->dev;
|
|
pc->chip.ops = &bcm2835_pwm_ops;
|
|
pc->chip.base = -1;
|
|
pc->chip.npwm = 2;
|
|
pc->chip.of_xlate = of_pwm_xlate_with_flags;
|
|
pc->chip.of_pwm_n_cells = 3;
|
|
|
|
platform_set_drvdata(pdev, pc);
|
|
|
|
ret = pwmchip_add(&pc->chip);
|
|
if (ret < 0)
|
|
goto add_fail;
|
|
|
|
return 0;
|
|
|
|
add_fail:
|
|
clk_disable_unprepare(pc->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int bcm2835_pwm_remove(struct platform_device *pdev)
|
|
{
|
|
struct bcm2835_pwm *pc = platform_get_drvdata(pdev);
|
|
|
|
clk_disable_unprepare(pc->clk);
|
|
|
|
return pwmchip_remove(&pc->chip);
|
|
}
|
|
|
|
static const struct of_device_id bcm2835_pwm_of_match[] = {
|
|
{ .compatible = "brcm,bcm2835-pwm", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bcm2835_pwm_of_match);
|
|
|
|
static struct platform_driver bcm2835_pwm_driver = {
|
|
.driver = {
|
|
.name = "bcm2835-pwm",
|
|
.of_match_table = bcm2835_pwm_of_match,
|
|
},
|
|
.probe = bcm2835_pwm_probe,
|
|
.remove = bcm2835_pwm_remove,
|
|
};
|
|
module_platform_driver(bcm2835_pwm_driver);
|
|
|
|
MODULE_AUTHOR("Bart Tanghe <bart.tanghe@thomasmore.be>");
|
|
MODULE_DESCRIPTION("Broadcom BCM2835 PWM driver");
|
|
MODULE_LICENSE("GPL v2");
|