linux/drivers/usb
Linus Torvalds 67db8a8086 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:

 - spurious power/wakeup sysfs files removal for I2C-HID devices, from
   Andrew Duggan

 - Logitech M560 support, from Goffredo Baroncelli

 - a lot of housekeeping cleanups to hid-lg4ff driver, from Michal Maly

 - improved support for Plantronics devices, from Terry Junge

 - Sony Motion Controller and Navigation Controller support and
   subsequent cleanups of hid-sony driver, from Frank Praznik and Simon
   Wood

 - HW support improvements to the Wacom driver, from Jason Gerecke and
   Ping Cheng

 - assorted small cleanups and device ID additions all over the place

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (69 commits)
  HID: cypress: use swap() in cp_report_fixup()
  HID: microsoft: Add Surface Power Cover
  HID: hid-sony: Fix report descriptor for Navigation Controller
  HID: hid-sony: Navigation controller only has 1 LED and no rumble
  HID: hid-sony: Add BT support for Navigation Controller
  HID: wacom: Introduce new 'touch_input' device
  HID: wacom: Split apart 'wacom_setup_pentouch_input_capabilites'
  HID: wacom: Introduce a new WACOM_DEVICETYPE_PAD device_type
  HID: wacom: Treat features->device_type values as flags
  HID: wacom: Simplify 'wacom_update_name'
  HID: rmi: Disable populating F30 when the touchpad has physical buttons
  HID: plantronics: Update to map volume up/down controls
  HID: sony: PS Move fix report descriptor
  HID: sony: PS3 Move enable LEDs and Rumble via BT
  HID: sony: Add support PS3 Move Battery via BT
  HID: sony: Add quirk for MOTION_CONTROLLER_BT
  HID: sony: Support PS3 Move Controller when connected via Bluetooth
  HID: i2c-hid: Do not set the ACPI companion field in the HID device
  usb, HID: Remove Vernier devices from lsusb and hid_ignore_list
  HID: hidpp: Add driver for mouse logitech M560
  ...
2015-06-23 14:05:52 -07:00
..
atm ueagle-atm: Delete unnecessary checks before the function call "release_firmware" 2015-03-18 16:56:40 +01:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea usb: chipidea: debug: avoid out of bound read 2015-05-06 14:28:18 +08:00
class cdc-acm: prevent infinite loop when parsing CDC headers. 2015-04-28 12:53:16 +02:00
common usb: common: otg-fsm: only signal connect after switching to peripheral 2015-03-19 11:28:15 -05:00
core Added another USB product ID for ELAN touchscreen quirks. 2015-05-09 19:23:03 +02:00
dwc2 usb: dwc2: host: sleep USB_RESUME_TIMEOUT during resume 2015-04-10 13:52:49 +02:00
dwc3 usb: dwc3: gadget: Fix incorrect DEPCMD and DGCMD status macros 2015-05-26 09:44:55 -05:00
early
gadget usb: gadget: f_fs: fix check in read operation 2015-05-26 10:20:57 -05:00
host usb: host: xhci: add mutex for non-thread-safe data 2015-05-24 09:23:28 -07:00
image USB: image: use msecs_to_jiffies for time conversion 2015-03-18 16:20:34 +01:00
isp1760 usb: generic resume timeout for v4.1 2015-04-10 13:45:27 +02:00
misc usb, HID: Remove Vernier devices from lsusb and hid_ignore_list 2015-06-01 14:44:08 +02:00
mon
musb usb: musb: fix order of conditions for assigning end point operations 2015-05-26 10:15:10 -05:00
phy usb: phy: tahvo: Pass the IRQF_ONESHOT flag 2015-05-26 09:44:51 -05:00
renesas_usbhs usb: renesas_usbhs: Don't disable the pipe if Control write status stage 2015-05-26 10:21:53 -05:00
serial USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle 2015-06-04 23:22:16 +02:00
storage usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices 2015-05-10 15:38:33 +02:00
usbip usbip: vhci_hcd: use USB_DT_HUB 2015-04-03 19:03:15 +02:00
wusbcore wusbcore: rh: use USB_DT_HUB 2015-04-03 19:03:15 +02:00
Kconfig usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/ 2015-01-27 09:39:38 -06:00
Makefile usb: load usb phy earlier 2015-03-18 17:25:16 +01:00
README usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.