13c30a7558
The bus->clk_stop_timeout member is only initialized to a non-zero value
during the codec driver probe. This can lead to corner cases where this
value remains pegged at zero when the bus suspends, which results in an
endless loop in sdw_bus_wait_for_clk_prep_deprep().
Corner cases include configurations with no codecs described in the
firmware, or delays in probing codec drivers.
Initializing the default timeout to the smallest non-zero value avoid this
problem and allows for the existing logic to be preserved: the
bus->clk_stop_timeout is set as the maximum required by all codecs
connected on the bus.
Fixes: 1f2dcf3a15
("soundwire: intel: set dev_num_ida_min")
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221020015624.1703950-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2043 lines
51 KiB
C
2043 lines
51 KiB
C
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
|
|
// Copyright(c) 2015-17 Intel Corporation.
|
|
|
|
/*
|
|
* Soundwire Intel Master Driver
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/auxiliary_bus.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <sound/soc.h>
|
|
#include <linux/soundwire/sdw_registers.h>
|
|
#include <linux/soundwire/sdw.h>
|
|
#include <linux/soundwire/sdw_intel.h>
|
|
#include "cadence_master.h"
|
|
#include "bus.h"
|
|
#include "intel.h"
|
|
|
|
/* IDA min selected to avoid conflicts with HDaudio/iDISP SDI values */
|
|
#define INTEL_DEV_NUM_IDA_MIN 4
|
|
|
|
#define INTEL_MASTER_SUSPEND_DELAY_MS 3000
|
|
#define INTEL_MASTER_RESET_ITERATIONS 10
|
|
|
|
/*
|
|
* debug/config flags for the Intel SoundWire Master.
|
|
*
|
|
* Since we may have multiple masters active, we can have up to 8
|
|
* flags reused in each byte, with master0 using the ls-byte, etc.
|
|
*/
|
|
|
|
#define SDW_INTEL_MASTER_DISABLE_PM_RUNTIME BIT(0)
|
|
#define SDW_INTEL_MASTER_DISABLE_CLOCK_STOP BIT(1)
|
|
#define SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE BIT(2)
|
|
#define SDW_INTEL_MASTER_DISABLE_MULTI_LINK BIT(3)
|
|
|
|
static int md_flags;
|
|
module_param_named(sdw_md_flags, md_flags, int, 0444);
|
|
MODULE_PARM_DESC(sdw_md_flags, "SoundWire Intel Master device flags (0x0 all off)");
|
|
|
|
enum intel_pdi_type {
|
|
INTEL_PDI_IN = 0,
|
|
INTEL_PDI_OUT = 1,
|
|
INTEL_PDI_BD = 2,
|
|
};
|
|
|
|
#define cdns_to_intel(_cdns) container_of(_cdns, struct sdw_intel, cdns)
|
|
|
|
/*
|
|
* Read, write helpers for HW registers
|
|
*/
|
|
static inline int intel_readl(void __iomem *base, int offset)
|
|
{
|
|
return readl(base + offset);
|
|
}
|
|
|
|
static inline void intel_writel(void __iomem *base, int offset, int value)
|
|
{
|
|
writel(value, base + offset);
|
|
}
|
|
|
|
static inline u16 intel_readw(void __iomem *base, int offset)
|
|
{
|
|
return readw(base + offset);
|
|
}
|
|
|
|
static inline void intel_writew(void __iomem *base, int offset, u16 value)
|
|
{
|
|
writew(value, base + offset);
|
|
}
|
|
|
|
static int intel_wait_bit(void __iomem *base, int offset, u32 mask, u32 target)
|
|
{
|
|
int timeout = 10;
|
|
u32 reg_read;
|
|
|
|
do {
|
|
reg_read = readl(base + offset);
|
|
if ((reg_read & mask) == target)
|
|
return 0;
|
|
|
|
timeout--;
|
|
usleep_range(50, 100);
|
|
} while (timeout != 0);
|
|
|
|
return -EAGAIN;
|
|
}
|
|
|
|
static int intel_clear_bit(void __iomem *base, int offset, u32 value, u32 mask)
|
|
{
|
|
writel(value, base + offset);
|
|
return intel_wait_bit(base, offset, mask, 0);
|
|
}
|
|
|
|
static int intel_set_bit(void __iomem *base, int offset, u32 value, u32 mask)
|
|
{
|
|
writel(value, base + offset);
|
|
return intel_wait_bit(base, offset, mask, mask);
|
|
}
|
|
|
|
/*
|
|
* debugfs
|
|
*/
|
|
#ifdef CONFIG_DEBUG_FS
|
|
|
|
#define RD_BUF (2 * PAGE_SIZE)
|
|
|
|
static ssize_t intel_sprintf(void __iomem *mem, bool l,
|
|
char *buf, size_t pos, unsigned int reg)
|
|
{
|
|
int value;
|
|
|
|
if (l)
|
|
value = intel_readl(mem, reg);
|
|
else
|
|
value = intel_readw(mem, reg);
|
|
|
|
return scnprintf(buf + pos, RD_BUF - pos, "%4x\t%4x\n", reg, value);
|
|
}
|
|
|
|
static int intel_reg_show(struct seq_file *s_file, void *data)
|
|
{
|
|
struct sdw_intel *sdw = s_file->private;
|
|
void __iomem *s = sdw->link_res->shim;
|
|
void __iomem *a = sdw->link_res->alh;
|
|
char *buf;
|
|
ssize_t ret;
|
|
int i, j;
|
|
unsigned int links, reg;
|
|
|
|
buf = kzalloc(RD_BUF, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
links = intel_readl(s, SDW_SHIM_LCAP) & SDW_SHIM_LCAP_LCOUNT_MASK;
|
|
|
|
ret = scnprintf(buf, RD_BUF, "Register Value\n");
|
|
ret += scnprintf(buf + ret, RD_BUF - ret, "\nShim\n");
|
|
|
|
for (i = 0; i < links; i++) {
|
|
reg = SDW_SHIM_LCAP + i * 4;
|
|
ret += intel_sprintf(s, true, buf, ret, reg);
|
|
}
|
|
|
|
for (i = 0; i < links; i++) {
|
|
ret += scnprintf(buf + ret, RD_BUF - ret, "\nLink%d\n", i);
|
|
ret += intel_sprintf(s, false, buf, ret, SDW_SHIM_CTLSCAP(i));
|
|
ret += intel_sprintf(s, false, buf, ret, SDW_SHIM_CTLS0CM(i));
|
|
ret += intel_sprintf(s, false, buf, ret, SDW_SHIM_CTLS1CM(i));
|
|
ret += intel_sprintf(s, false, buf, ret, SDW_SHIM_CTLS2CM(i));
|
|
ret += intel_sprintf(s, false, buf, ret, SDW_SHIM_CTLS3CM(i));
|
|
ret += intel_sprintf(s, false, buf, ret, SDW_SHIM_PCMSCAP(i));
|
|
|
|
ret += scnprintf(buf + ret, RD_BUF - ret, "\n PCMSyCH registers\n");
|
|
|
|
/*
|
|
* the value 10 is the number of PDIs. We will need a
|
|
* cleanup to remove hard-coded Intel configurations
|
|
* from cadence_master.c
|
|
*/
|
|
for (j = 0; j < 10; j++) {
|
|
ret += intel_sprintf(s, false, buf, ret,
|
|
SDW_SHIM_PCMSYCHM(i, j));
|
|
ret += intel_sprintf(s, false, buf, ret,
|
|
SDW_SHIM_PCMSYCHC(i, j));
|
|
}
|
|
ret += scnprintf(buf + ret, RD_BUF - ret, "\n IOCTL, CTMCTL\n");
|
|
|
|
ret += intel_sprintf(s, false, buf, ret, SDW_SHIM_IOCTL(i));
|
|
ret += intel_sprintf(s, false, buf, ret, SDW_SHIM_CTMCTL(i));
|
|
}
|
|
|
|
ret += scnprintf(buf + ret, RD_BUF - ret, "\nWake registers\n");
|
|
ret += intel_sprintf(s, false, buf, ret, SDW_SHIM_WAKEEN);
|
|
ret += intel_sprintf(s, false, buf, ret, SDW_SHIM_WAKESTS);
|
|
|
|
ret += scnprintf(buf + ret, RD_BUF - ret, "\nALH STRMzCFG\n");
|
|
for (i = 0; i < SDW_ALH_NUM_STREAMS; i++)
|
|
ret += intel_sprintf(a, true, buf, ret, SDW_ALH_STRMZCFG(i));
|
|
|
|
seq_printf(s_file, "%s", buf);
|
|
kfree(buf);
|
|
|
|
return 0;
|
|
}
|
|
DEFINE_SHOW_ATTRIBUTE(intel_reg);
|
|
|
|
static int intel_set_m_datamode(void *data, u64 value)
|
|
{
|
|
struct sdw_intel *sdw = data;
|
|
struct sdw_bus *bus = &sdw->cdns.bus;
|
|
|
|
if (value > SDW_PORT_DATA_MODE_STATIC_1)
|
|
return -EINVAL;
|
|
|
|
/* Userspace changed the hardware state behind the kernel's back */
|
|
add_taint(TAINT_USER, LOCKDEP_STILL_OK);
|
|
|
|
bus->params.m_data_mode = value;
|
|
|
|
return 0;
|
|
}
|
|
DEFINE_DEBUGFS_ATTRIBUTE(intel_set_m_datamode_fops, NULL,
|
|
intel_set_m_datamode, "%llu\n");
|
|
|
|
static int intel_set_s_datamode(void *data, u64 value)
|
|
{
|
|
struct sdw_intel *sdw = data;
|
|
struct sdw_bus *bus = &sdw->cdns.bus;
|
|
|
|
if (value > SDW_PORT_DATA_MODE_STATIC_1)
|
|
return -EINVAL;
|
|
|
|
/* Userspace changed the hardware state behind the kernel's back */
|
|
add_taint(TAINT_USER, LOCKDEP_STILL_OK);
|
|
|
|
bus->params.s_data_mode = value;
|
|
|
|
return 0;
|
|
}
|
|
DEFINE_DEBUGFS_ATTRIBUTE(intel_set_s_datamode_fops, NULL,
|
|
intel_set_s_datamode, "%llu\n");
|
|
|
|
static void intel_debugfs_init(struct sdw_intel *sdw)
|
|
{
|
|
struct dentry *root = sdw->cdns.bus.debugfs;
|
|
|
|
if (!root)
|
|
return;
|
|
|
|
sdw->debugfs = debugfs_create_dir("intel-sdw", root);
|
|
|
|
debugfs_create_file("intel-registers", 0400, sdw->debugfs, sdw,
|
|
&intel_reg_fops);
|
|
|
|
debugfs_create_file("intel-m-datamode", 0200, sdw->debugfs, sdw,
|
|
&intel_set_m_datamode_fops);
|
|
|
|
debugfs_create_file("intel-s-datamode", 0200, sdw->debugfs, sdw,
|
|
&intel_set_s_datamode_fops);
|
|
|
|
sdw_cdns_debugfs_init(&sdw->cdns, sdw->debugfs);
|
|
}
|
|
|
|
static void intel_debugfs_exit(struct sdw_intel *sdw)
|
|
{
|
|
debugfs_remove_recursive(sdw->debugfs);
|
|
}
|
|
#else
|
|
static void intel_debugfs_init(struct sdw_intel *sdw) {}
|
|
static void intel_debugfs_exit(struct sdw_intel *sdw) {}
|
|
#endif /* CONFIG_DEBUG_FS */
|
|
|
|
/*
|
|
* shim ops
|
|
*/
|
|
/* this needs to be called with shim_lock */
|
|
static void intel_shim_glue_to_master_ip(struct sdw_intel *sdw)
|
|
{
|
|
void __iomem *shim = sdw->link_res->shim;
|
|
unsigned int link_id = sdw->instance;
|
|
u16 ioctl;
|
|
|
|
/* Switch to MIP from Glue logic */
|
|
ioctl = intel_readw(shim, SDW_SHIM_IOCTL(link_id));
|
|
|
|
ioctl &= ~(SDW_SHIM_IOCTL_DOE);
|
|
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
|
|
usleep_range(10, 15);
|
|
|
|
ioctl &= ~(SDW_SHIM_IOCTL_DO);
|
|
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
|
|
usleep_range(10, 15);
|
|
|
|
ioctl |= (SDW_SHIM_IOCTL_MIF);
|
|
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
|
|
usleep_range(10, 15);
|
|
|
|
ioctl &= ~(SDW_SHIM_IOCTL_BKE);
|
|
ioctl &= ~(SDW_SHIM_IOCTL_COE);
|
|
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
|
|
usleep_range(10, 15);
|
|
|
|
/* at this point Master IP has full control of the I/Os */
|
|
}
|
|
|
|
/* this needs to be called with shim_lock */
|
|
static void intel_shim_master_ip_to_glue(struct sdw_intel *sdw)
|
|
{
|
|
unsigned int link_id = sdw->instance;
|
|
void __iomem *shim = sdw->link_res->shim;
|
|
u16 ioctl;
|
|
|
|
/* Glue logic */
|
|
ioctl = intel_readw(shim, SDW_SHIM_IOCTL(link_id));
|
|
ioctl |= SDW_SHIM_IOCTL_BKE;
|
|
ioctl |= SDW_SHIM_IOCTL_COE;
|
|
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
|
|
usleep_range(10, 15);
|
|
|
|
ioctl &= ~(SDW_SHIM_IOCTL_MIF);
|
|
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
|
|
usleep_range(10, 15);
|
|
|
|
/* at this point Integration Glue has full control of the I/Os */
|
|
}
|
|
|
|
/* this needs to be called with shim_lock */
|
|
static void intel_shim_init(struct sdw_intel *sdw)
|
|
{
|
|
void __iomem *shim = sdw->link_res->shim;
|
|
unsigned int link_id = sdw->instance;
|
|
u16 ioctl = 0, act = 0;
|
|
|
|
/* Initialize Shim */
|
|
ioctl |= SDW_SHIM_IOCTL_BKE;
|
|
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
|
|
usleep_range(10, 15);
|
|
|
|
ioctl |= SDW_SHIM_IOCTL_WPDD;
|
|
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
|
|
usleep_range(10, 15);
|
|
|
|
ioctl |= SDW_SHIM_IOCTL_DO;
|
|
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
|
|
usleep_range(10, 15);
|
|
|
|
ioctl |= SDW_SHIM_IOCTL_DOE;
|
|
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
|
|
usleep_range(10, 15);
|
|
|
|
intel_shim_glue_to_master_ip(sdw);
|
|
|
|
u16p_replace_bits(&act, 0x1, SDW_SHIM_CTMCTL_DOAIS);
|
|
act |= SDW_SHIM_CTMCTL_DACTQE;
|
|
act |= SDW_SHIM_CTMCTL_DODS;
|
|
intel_writew(shim, SDW_SHIM_CTMCTL(link_id), act);
|
|
usleep_range(10, 15);
|
|
}
|
|
|
|
static int intel_shim_check_wake(struct sdw_intel *sdw)
|
|
{
|
|
void __iomem *shim;
|
|
u16 wake_sts;
|
|
|
|
shim = sdw->link_res->shim;
|
|
wake_sts = intel_readw(shim, SDW_SHIM_WAKESTS);
|
|
|
|
return wake_sts & BIT(sdw->instance);
|
|
}
|
|
|
|
static void intel_shim_wake(struct sdw_intel *sdw, bool wake_enable)
|
|
{
|
|
void __iomem *shim = sdw->link_res->shim;
|
|
unsigned int link_id = sdw->instance;
|
|
u16 wake_en, wake_sts;
|
|
|
|
mutex_lock(sdw->link_res->shim_lock);
|
|
wake_en = intel_readw(shim, SDW_SHIM_WAKEEN);
|
|
|
|
if (wake_enable) {
|
|
/* Enable the wakeup */
|
|
wake_en |= (SDW_SHIM_WAKEEN_ENABLE << link_id);
|
|
intel_writew(shim, SDW_SHIM_WAKEEN, wake_en);
|
|
} else {
|
|
/* Disable the wake up interrupt */
|
|
wake_en &= ~(SDW_SHIM_WAKEEN_ENABLE << link_id);
|
|
intel_writew(shim, SDW_SHIM_WAKEEN, wake_en);
|
|
|
|
/* Clear wake status */
|
|
wake_sts = intel_readw(shim, SDW_SHIM_WAKESTS);
|
|
wake_sts |= (SDW_SHIM_WAKESTS_STATUS << link_id);
|
|
intel_writew(shim, SDW_SHIM_WAKESTS, wake_sts);
|
|
}
|
|
mutex_unlock(sdw->link_res->shim_lock);
|
|
}
|
|
|
|
static int intel_link_power_up(struct sdw_intel *sdw)
|
|
{
|
|
unsigned int link_id = sdw->instance;
|
|
void __iomem *shim = sdw->link_res->shim;
|
|
u32 *shim_mask = sdw->link_res->shim_mask;
|
|
struct sdw_bus *bus = &sdw->cdns.bus;
|
|
struct sdw_master_prop *prop = &bus->prop;
|
|
u32 spa_mask, cpa_mask;
|
|
u32 link_control;
|
|
int ret = 0;
|
|
u32 syncprd;
|
|
u32 sync_reg;
|
|
|
|
mutex_lock(sdw->link_res->shim_lock);
|
|
|
|
/*
|
|
* The hardware relies on an internal counter, typically 4kHz,
|
|
* to generate the SoundWire SSP - which defines a 'safe'
|
|
* synchronization point between commands and audio transport
|
|
* and allows for multi link synchronization. The SYNCPRD value
|
|
* is only dependent on the oscillator clock provided to
|
|
* the IP, so adjust based on _DSD properties reported in DSDT
|
|
* tables. The values reported are based on either 24MHz
|
|
* (CNL/CML) or 38.4 MHz (ICL/TGL+).
|
|
*/
|
|
if (prop->mclk_freq % 6000000)
|
|
syncprd = SDW_SHIM_SYNC_SYNCPRD_VAL_38_4;
|
|
else
|
|
syncprd = SDW_SHIM_SYNC_SYNCPRD_VAL_24;
|
|
|
|
if (!*shim_mask) {
|
|
dev_dbg(sdw->cdns.dev, "powering up all links\n");
|
|
|
|
/* we first need to program the SyncPRD/CPU registers */
|
|
dev_dbg(sdw->cdns.dev,
|
|
"first link up, programming SYNCPRD\n");
|
|
|
|
/* set SyncPRD period */
|
|
sync_reg = intel_readl(shim, SDW_SHIM_SYNC);
|
|
u32p_replace_bits(&sync_reg, syncprd, SDW_SHIM_SYNC_SYNCPRD);
|
|
|
|
/* Set SyncCPU bit */
|
|
sync_reg |= SDW_SHIM_SYNC_SYNCCPU;
|
|
intel_writel(shim, SDW_SHIM_SYNC, sync_reg);
|
|
|
|
/* Link power up sequence */
|
|
link_control = intel_readl(shim, SDW_SHIM_LCTL);
|
|
|
|
/* only power-up enabled links */
|
|
spa_mask = FIELD_PREP(SDW_SHIM_LCTL_SPA_MASK, sdw->link_res->link_mask);
|
|
cpa_mask = FIELD_PREP(SDW_SHIM_LCTL_CPA_MASK, sdw->link_res->link_mask);
|
|
|
|
link_control |= spa_mask;
|
|
|
|
ret = intel_set_bit(shim, SDW_SHIM_LCTL, link_control, cpa_mask);
|
|
if (ret < 0) {
|
|
dev_err(sdw->cdns.dev, "Failed to power up link: %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
/* SyncCPU will change once link is active */
|
|
ret = intel_wait_bit(shim, SDW_SHIM_SYNC,
|
|
SDW_SHIM_SYNC_SYNCCPU, 0);
|
|
if (ret < 0) {
|
|
dev_err(sdw->cdns.dev,
|
|
"Failed to set SHIM_SYNC: %d\n", ret);
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
*shim_mask |= BIT(link_id);
|
|
|
|
sdw->cdns.link_up = true;
|
|
|
|
intel_shim_init(sdw);
|
|
|
|
out:
|
|
mutex_unlock(sdw->link_res->shim_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int intel_link_power_down(struct sdw_intel *sdw)
|
|
{
|
|
u32 link_control, spa_mask, cpa_mask;
|
|
unsigned int link_id = sdw->instance;
|
|
void __iomem *shim = sdw->link_res->shim;
|
|
u32 *shim_mask = sdw->link_res->shim_mask;
|
|
int ret = 0;
|
|
|
|
mutex_lock(sdw->link_res->shim_lock);
|
|
|
|
if (!(*shim_mask & BIT(link_id)))
|
|
dev_err(sdw->cdns.dev,
|
|
"%s: Unbalanced power-up/down calls\n", __func__);
|
|
|
|
sdw->cdns.link_up = false;
|
|
|
|
intel_shim_master_ip_to_glue(sdw);
|
|
|
|
*shim_mask &= ~BIT(link_id);
|
|
|
|
if (!*shim_mask) {
|
|
|
|
dev_dbg(sdw->cdns.dev, "powering down all links\n");
|
|
|
|
/* Link power down sequence */
|
|
link_control = intel_readl(shim, SDW_SHIM_LCTL);
|
|
|
|
/* only power-down enabled links */
|
|
spa_mask = FIELD_PREP(SDW_SHIM_LCTL_SPA_MASK, ~sdw->link_res->link_mask);
|
|
cpa_mask = FIELD_PREP(SDW_SHIM_LCTL_CPA_MASK, sdw->link_res->link_mask);
|
|
|
|
link_control &= spa_mask;
|
|
|
|
ret = intel_clear_bit(shim, SDW_SHIM_LCTL, link_control, cpa_mask);
|
|
if (ret < 0) {
|
|
dev_err(sdw->cdns.dev, "%s: could not power down link\n", __func__);
|
|
|
|
/*
|
|
* we leave the sdw->cdns.link_up flag as false since we've disabled
|
|
* the link at this point and cannot handle interrupts any longer.
|
|
*/
|
|
}
|
|
}
|
|
|
|
mutex_unlock(sdw->link_res->shim_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void intel_shim_sync_arm(struct sdw_intel *sdw)
|
|
{
|
|
void __iomem *shim = sdw->link_res->shim;
|
|
u32 sync_reg;
|
|
|
|
mutex_lock(sdw->link_res->shim_lock);
|
|
|
|
/* update SYNC register */
|
|
sync_reg = intel_readl(shim, SDW_SHIM_SYNC);
|
|
sync_reg |= (SDW_SHIM_SYNC_CMDSYNC << sdw->instance);
|
|
intel_writel(shim, SDW_SHIM_SYNC, sync_reg);
|
|
|
|
mutex_unlock(sdw->link_res->shim_lock);
|
|
}
|
|
|
|
static int intel_shim_sync_go_unlocked(struct sdw_intel *sdw)
|
|
{
|
|
void __iomem *shim = sdw->link_res->shim;
|
|
u32 sync_reg;
|
|
int ret;
|
|
|
|
/* Read SYNC register */
|
|
sync_reg = intel_readl(shim, SDW_SHIM_SYNC);
|
|
|
|
/*
|
|
* Set SyncGO bit to synchronously trigger a bank switch for
|
|
* all the masters. A write to SYNCGO bit clears CMDSYNC bit for all
|
|
* the Masters.
|
|
*/
|
|
sync_reg |= SDW_SHIM_SYNC_SYNCGO;
|
|
|
|
ret = intel_clear_bit(shim, SDW_SHIM_SYNC, sync_reg,
|
|
SDW_SHIM_SYNC_SYNCGO);
|
|
|
|
if (ret < 0)
|
|
dev_err(sdw->cdns.dev, "SyncGO clear failed: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int intel_shim_sync_go(struct sdw_intel *sdw)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(sdw->link_res->shim_lock);
|
|
|
|
ret = intel_shim_sync_go_unlocked(sdw);
|
|
|
|
mutex_unlock(sdw->link_res->shim_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* PDI routines
|
|
*/
|
|
static void intel_pdi_init(struct sdw_intel *sdw,
|
|
struct sdw_cdns_stream_config *config)
|
|
{
|
|
void __iomem *shim = sdw->link_res->shim;
|
|
unsigned int link_id = sdw->instance;
|
|
int pcm_cap;
|
|
|
|
/* PCM Stream Capability */
|
|
pcm_cap = intel_readw(shim, SDW_SHIM_PCMSCAP(link_id));
|
|
|
|
config->pcm_bd = FIELD_GET(SDW_SHIM_PCMSCAP_BSS, pcm_cap);
|
|
config->pcm_in = FIELD_GET(SDW_SHIM_PCMSCAP_ISS, pcm_cap);
|
|
config->pcm_out = FIELD_GET(SDW_SHIM_PCMSCAP_OSS, pcm_cap);
|
|
|
|
dev_dbg(sdw->cdns.dev, "PCM cap bd:%d in:%d out:%d\n",
|
|
config->pcm_bd, config->pcm_in, config->pcm_out);
|
|
}
|
|
|
|
static int
|
|
intel_pdi_get_ch_cap(struct sdw_intel *sdw, unsigned int pdi_num)
|
|
{
|
|
void __iomem *shim = sdw->link_res->shim;
|
|
unsigned int link_id = sdw->instance;
|
|
int count;
|
|
|
|
count = intel_readw(shim, SDW_SHIM_PCMSYCHC(link_id, pdi_num));
|
|
|
|
/*
|
|
* WORKAROUND: on all existing Intel controllers, pdi
|
|
* number 2 reports channel count as 1 even though it
|
|
* supports 8 channels. Performing hardcoding for pdi
|
|
* number 2.
|
|
*/
|
|
if (pdi_num == 2)
|
|
count = 7;
|
|
|
|
/* zero based values for channel count in register */
|
|
count++;
|
|
|
|
return count;
|
|
}
|
|
|
|
static int intel_pdi_get_ch_update(struct sdw_intel *sdw,
|
|
struct sdw_cdns_pdi *pdi,
|
|
unsigned int num_pdi,
|
|
unsigned int *num_ch)
|
|
{
|
|
int i, ch_count = 0;
|
|
|
|
for (i = 0; i < num_pdi; i++) {
|
|
pdi->ch_count = intel_pdi_get_ch_cap(sdw, pdi->num);
|
|
ch_count += pdi->ch_count;
|
|
pdi++;
|
|
}
|
|
|
|
*num_ch = ch_count;
|
|
return 0;
|
|
}
|
|
|
|
static int intel_pdi_stream_ch_update(struct sdw_intel *sdw,
|
|
struct sdw_cdns_streams *stream)
|
|
{
|
|
intel_pdi_get_ch_update(sdw, stream->bd, stream->num_bd,
|
|
&stream->num_ch_bd);
|
|
|
|
intel_pdi_get_ch_update(sdw, stream->in, stream->num_in,
|
|
&stream->num_ch_in);
|
|
|
|
intel_pdi_get_ch_update(sdw, stream->out, stream->num_out,
|
|
&stream->num_ch_out);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intel_pdi_ch_update(struct sdw_intel *sdw)
|
|
{
|
|
intel_pdi_stream_ch_update(sdw, &sdw->cdns.pcm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
intel_pdi_shim_configure(struct sdw_intel *sdw, struct sdw_cdns_pdi *pdi)
|
|
{
|
|
void __iomem *shim = sdw->link_res->shim;
|
|
unsigned int link_id = sdw->instance;
|
|
int pdi_conf = 0;
|
|
|
|
/* the Bulk and PCM streams are not contiguous */
|
|
pdi->intel_alh_id = (link_id * 16) + pdi->num + 3;
|
|
if (pdi->num >= 2)
|
|
pdi->intel_alh_id += 2;
|
|
|
|
/*
|
|
* Program stream parameters to stream SHIM register
|
|
* This is applicable for PCM stream only.
|
|
*/
|
|
if (pdi->type != SDW_STREAM_PCM)
|
|
return;
|
|
|
|
if (pdi->dir == SDW_DATA_DIR_RX)
|
|
pdi_conf |= SDW_SHIM_PCMSYCM_DIR;
|
|
else
|
|
pdi_conf &= ~(SDW_SHIM_PCMSYCM_DIR);
|
|
|
|
u32p_replace_bits(&pdi_conf, pdi->intel_alh_id, SDW_SHIM_PCMSYCM_STREAM);
|
|
u32p_replace_bits(&pdi_conf, pdi->l_ch_num, SDW_SHIM_PCMSYCM_LCHN);
|
|
u32p_replace_bits(&pdi_conf, pdi->h_ch_num, SDW_SHIM_PCMSYCM_HCHN);
|
|
|
|
intel_writew(shim, SDW_SHIM_PCMSYCHM(link_id, pdi->num), pdi_conf);
|
|
}
|
|
|
|
static void
|
|
intel_pdi_alh_configure(struct sdw_intel *sdw, struct sdw_cdns_pdi *pdi)
|
|
{
|
|
void __iomem *alh = sdw->link_res->alh;
|
|
unsigned int link_id = sdw->instance;
|
|
unsigned int conf;
|
|
|
|
/* the Bulk and PCM streams are not contiguous */
|
|
pdi->intel_alh_id = (link_id * 16) + pdi->num + 3;
|
|
if (pdi->num >= 2)
|
|
pdi->intel_alh_id += 2;
|
|
|
|
/* Program Stream config ALH register */
|
|
conf = intel_readl(alh, SDW_ALH_STRMZCFG(pdi->intel_alh_id));
|
|
|
|
u32p_replace_bits(&conf, SDW_ALH_STRMZCFG_DMAT_VAL, SDW_ALH_STRMZCFG_DMAT);
|
|
u32p_replace_bits(&conf, pdi->ch_count - 1, SDW_ALH_STRMZCFG_CHN);
|
|
|
|
intel_writel(alh, SDW_ALH_STRMZCFG(pdi->intel_alh_id), conf);
|
|
}
|
|
|
|
static int intel_params_stream(struct sdw_intel *sdw,
|
|
int stream,
|
|
struct snd_soc_dai *dai,
|
|
struct snd_pcm_hw_params *hw_params,
|
|
int link_id, int alh_stream_id)
|
|
{
|
|
struct sdw_intel_link_res *res = sdw->link_res;
|
|
struct sdw_intel_stream_params_data params_data;
|
|
|
|
params_data.stream = stream; /* direction */
|
|
params_data.dai = dai;
|
|
params_data.hw_params = hw_params;
|
|
params_data.link_id = link_id;
|
|
params_data.alh_stream_id = alh_stream_id;
|
|
|
|
if (res->ops && res->ops->params_stream && res->dev)
|
|
return res->ops->params_stream(res->dev,
|
|
¶ms_data);
|
|
return -EIO;
|
|
}
|
|
|
|
static int intel_free_stream(struct sdw_intel *sdw,
|
|
int stream,
|
|
struct snd_soc_dai *dai,
|
|
int link_id)
|
|
{
|
|
struct sdw_intel_link_res *res = sdw->link_res;
|
|
struct sdw_intel_stream_free_data free_data;
|
|
|
|
free_data.stream = stream; /* direction */
|
|
free_data.dai = dai;
|
|
free_data.link_id = link_id;
|
|
|
|
if (res->ops && res->ops->free_stream && res->dev)
|
|
return res->ops->free_stream(res->dev,
|
|
&free_data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* bank switch routines
|
|
*/
|
|
|
|
static int intel_pre_bank_switch(struct sdw_bus *bus)
|
|
{
|
|
struct sdw_cdns *cdns = bus_to_cdns(bus);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
|
|
/* Write to register only for multi-link */
|
|
if (!bus->multi_link)
|
|
return 0;
|
|
|
|
intel_shim_sync_arm(sdw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intel_post_bank_switch(struct sdw_bus *bus)
|
|
{
|
|
struct sdw_cdns *cdns = bus_to_cdns(bus);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
void __iomem *shim = sdw->link_res->shim;
|
|
int sync_reg, ret;
|
|
|
|
/* Write to register only for multi-link */
|
|
if (!bus->multi_link)
|
|
return 0;
|
|
|
|
mutex_lock(sdw->link_res->shim_lock);
|
|
|
|
/* Read SYNC register */
|
|
sync_reg = intel_readl(shim, SDW_SHIM_SYNC);
|
|
|
|
/*
|
|
* post_bank_switch() ops is called from the bus in loop for
|
|
* all the Masters in the steam with the expectation that
|
|
* we trigger the bankswitch for the only first Master in the list
|
|
* and do nothing for the other Masters
|
|
*
|
|
* So, set the SYNCGO bit only if CMDSYNC bit is set for any Master.
|
|
*/
|
|
if (!(sync_reg & SDW_SHIM_SYNC_CMDSYNC_MASK)) {
|
|
ret = 0;
|
|
goto unlock;
|
|
}
|
|
|
|
ret = intel_shim_sync_go_unlocked(sdw);
|
|
unlock:
|
|
mutex_unlock(sdw->link_res->shim_lock);
|
|
|
|
if (ret < 0)
|
|
dev_err(sdw->cdns.dev, "Post bank switch failed: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* DAI routines
|
|
*/
|
|
|
|
static int intel_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct sdw_cdns *cdns = snd_soc_dai_get_drvdata(dai);
|
|
int ret;
|
|
|
|
ret = pm_runtime_resume_and_get(cdns->dev);
|
|
if (ret < 0 && ret != -EACCES) {
|
|
dev_err_ratelimited(cdns->dev,
|
|
"pm_runtime_resume_and_get failed in %s, ret %d\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int intel_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct sdw_cdns *cdns = snd_soc_dai_get_drvdata(dai);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_cdns_dma_data *dma;
|
|
struct sdw_cdns_pdi *pdi;
|
|
struct sdw_stream_config sconfig;
|
|
struct sdw_port_config *pconfig;
|
|
int ch, dir;
|
|
int ret;
|
|
|
|
dma = snd_soc_dai_get_dma_data(dai, substream);
|
|
if (!dma)
|
|
return -EIO;
|
|
|
|
ch = params_channels(params);
|
|
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
|
|
dir = SDW_DATA_DIR_RX;
|
|
else
|
|
dir = SDW_DATA_DIR_TX;
|
|
|
|
pdi = sdw_cdns_alloc_pdi(cdns, &cdns->pcm, ch, dir, dai->id);
|
|
|
|
if (!pdi) {
|
|
ret = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
/* do run-time configurations for SHIM, ALH and PDI/PORT */
|
|
intel_pdi_shim_configure(sdw, pdi);
|
|
intel_pdi_alh_configure(sdw, pdi);
|
|
sdw_cdns_config_stream(cdns, ch, dir, pdi);
|
|
|
|
/* store pdi and hw_params, may be needed in prepare step */
|
|
dma->paused = false;
|
|
dma->suspended = false;
|
|
dma->pdi = pdi;
|
|
dma->hw_params = params;
|
|
|
|
/* Inform DSP about PDI stream number */
|
|
ret = intel_params_stream(sdw, substream->stream, dai, params,
|
|
sdw->instance,
|
|
pdi->intel_alh_id);
|
|
if (ret)
|
|
goto error;
|
|
|
|
sconfig.direction = dir;
|
|
sconfig.ch_count = ch;
|
|
sconfig.frame_rate = params_rate(params);
|
|
sconfig.type = dma->stream_type;
|
|
|
|
sconfig.bps = snd_pcm_format_width(params_format(params));
|
|
|
|
/* Port configuration */
|
|
pconfig = kzalloc(sizeof(*pconfig), GFP_KERNEL);
|
|
if (!pconfig) {
|
|
ret = -ENOMEM;
|
|
goto error;
|
|
}
|
|
|
|
pconfig->num = pdi->num;
|
|
pconfig->ch_mask = (1 << ch) - 1;
|
|
|
|
ret = sdw_stream_add_master(&cdns->bus, &sconfig,
|
|
pconfig, 1, dma->stream);
|
|
if (ret)
|
|
dev_err(cdns->dev, "add master to stream failed:%d\n", ret);
|
|
|
|
kfree(pconfig);
|
|
error:
|
|
return ret;
|
|
}
|
|
|
|
static int intel_prepare(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct sdw_cdns *cdns = snd_soc_dai_get_drvdata(dai);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_cdns_dma_data *dma;
|
|
int ch, dir;
|
|
int ret = 0;
|
|
|
|
dma = snd_soc_dai_get_dma_data(dai, substream);
|
|
if (!dma) {
|
|
dev_err(dai->dev, "failed to get dma data in %s\n",
|
|
__func__);
|
|
return -EIO;
|
|
}
|
|
|
|
if (dma->suspended) {
|
|
dma->suspended = false;
|
|
|
|
/*
|
|
* .prepare() is called after system resume, where we
|
|
* need to reinitialize the SHIM/ALH/Cadence IP.
|
|
* .prepare() is also called to deal with underflows,
|
|
* but in those cases we cannot touch ALH/SHIM
|
|
* registers
|
|
*/
|
|
|
|
/* configure stream */
|
|
ch = params_channels(dma->hw_params);
|
|
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
|
|
dir = SDW_DATA_DIR_RX;
|
|
else
|
|
dir = SDW_DATA_DIR_TX;
|
|
|
|
intel_pdi_shim_configure(sdw, dma->pdi);
|
|
intel_pdi_alh_configure(sdw, dma->pdi);
|
|
sdw_cdns_config_stream(cdns, ch, dir, dma->pdi);
|
|
|
|
/* Inform DSP about PDI stream number */
|
|
ret = intel_params_stream(sdw, substream->stream, dai,
|
|
dma->hw_params,
|
|
sdw->instance,
|
|
dma->pdi->intel_alh_id);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
intel_hw_free(struct snd_pcm_substream *substream, struct snd_soc_dai *dai)
|
|
{
|
|
struct sdw_cdns *cdns = snd_soc_dai_get_drvdata(dai);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_cdns_dma_data *dma;
|
|
int ret;
|
|
|
|
dma = snd_soc_dai_get_dma_data(dai, substream);
|
|
if (!dma)
|
|
return -EIO;
|
|
|
|
/*
|
|
* The sdw stream state will transition to RELEASED when stream->
|
|
* master_list is empty. So the stream state will transition to
|
|
* DEPREPARED for the first cpu-dai and to RELEASED for the last
|
|
* cpu-dai.
|
|
*/
|
|
ret = sdw_stream_remove_master(&cdns->bus, dma->stream);
|
|
if (ret < 0) {
|
|
dev_err(dai->dev, "remove master from stream %s failed: %d\n",
|
|
dma->stream->name, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = intel_free_stream(sdw, substream->stream, dai, sdw->instance);
|
|
if (ret < 0) {
|
|
dev_err(dai->dev, "intel_free_stream: failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
dma->hw_params = NULL;
|
|
dma->pdi = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void intel_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct sdw_cdns *cdns = snd_soc_dai_get_drvdata(dai);
|
|
|
|
pm_runtime_mark_last_busy(cdns->dev);
|
|
pm_runtime_put_autosuspend(cdns->dev);
|
|
}
|
|
|
|
static int intel_pcm_set_sdw_stream(struct snd_soc_dai *dai,
|
|
void *stream, int direction)
|
|
{
|
|
return cdns_set_sdw_stream(dai, stream, direction);
|
|
}
|
|
|
|
static void *intel_get_sdw_stream(struct snd_soc_dai *dai,
|
|
int direction)
|
|
{
|
|
struct sdw_cdns_dma_data *dma;
|
|
|
|
if (direction == SNDRV_PCM_STREAM_PLAYBACK)
|
|
dma = dai->playback_dma_data;
|
|
else
|
|
dma = dai->capture_dma_data;
|
|
|
|
if (!dma)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
return dma->stream;
|
|
}
|
|
|
|
static int intel_trigger(struct snd_pcm_substream *substream, int cmd, struct snd_soc_dai *dai)
|
|
{
|
|
struct sdw_cdns *cdns = snd_soc_dai_get_drvdata(dai);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_intel_link_res *res = sdw->link_res;
|
|
struct sdw_cdns_dma_data *dma;
|
|
int ret = 0;
|
|
|
|
/*
|
|
* The .trigger callback is used to send required IPC to audio
|
|
* firmware. The .free_stream callback will still be called
|
|
* by intel_free_stream() in the TRIGGER_SUSPEND case.
|
|
*/
|
|
if (res->ops && res->ops->trigger)
|
|
res->ops->trigger(dai, cmd, substream->stream);
|
|
|
|
dma = snd_soc_dai_get_dma_data(dai, substream);
|
|
if (!dma) {
|
|
dev_err(dai->dev, "failed to get dma data in %s\n",
|
|
__func__);
|
|
return -EIO;
|
|
}
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
|
|
/*
|
|
* The .prepare callback is used to deal with xruns and resume operations.
|
|
* In the case of xruns, the DMAs and SHIM registers cannot be touched,
|
|
* but for resume operations the DMAs and SHIM registers need to be initialized.
|
|
* the .trigger callback is used to track the suspend case only.
|
|
*/
|
|
|
|
dma->suspended = true;
|
|
|
|
ret = intel_free_stream(sdw, substream->stream, dai, sdw->instance);
|
|
break;
|
|
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
dma->paused = true;
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
dma->paused = false;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int intel_component_probe(struct snd_soc_component *component)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* make sure the device is pm_runtime_active before initiating
|
|
* bus transactions during the card registration.
|
|
* We use pm_runtime_resume() here, without taking a reference
|
|
* and releasing it immediately.
|
|
*/
|
|
ret = pm_runtime_resume(component->dev);
|
|
if (ret < 0 && ret != -EACCES)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intel_component_dais_suspend(struct snd_soc_component *component)
|
|
{
|
|
struct snd_soc_dai *dai;
|
|
|
|
/*
|
|
* In the corner case where a SUSPEND happens during a PAUSE, the ALSA core
|
|
* does not throw the TRIGGER_SUSPEND. This leaves the DAIs in an unbalanced state.
|
|
* Since the component suspend is called last, we can trap this corner case
|
|
* and force the DAIs to release their resources.
|
|
*/
|
|
for_each_component_dais(component, dai) {
|
|
struct sdw_cdns *cdns = snd_soc_dai_get_drvdata(dai);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_cdns_dma_data *dma;
|
|
int stream;
|
|
int ret;
|
|
|
|
dma = dai->playback_dma_data;
|
|
stream = SNDRV_PCM_STREAM_PLAYBACK;
|
|
if (!dma) {
|
|
dma = dai->capture_dma_data;
|
|
stream = SNDRV_PCM_STREAM_CAPTURE;
|
|
}
|
|
|
|
if (!dma)
|
|
continue;
|
|
|
|
if (dma->suspended)
|
|
continue;
|
|
|
|
if (dma->paused) {
|
|
dma->suspended = true;
|
|
|
|
ret = intel_free_stream(sdw, stream, dai, sdw->instance);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops intel_pcm_dai_ops = {
|
|
.startup = intel_startup,
|
|
.hw_params = intel_hw_params,
|
|
.prepare = intel_prepare,
|
|
.hw_free = intel_hw_free,
|
|
.trigger = intel_trigger,
|
|
.shutdown = intel_shutdown,
|
|
.set_stream = intel_pcm_set_sdw_stream,
|
|
.get_stream = intel_get_sdw_stream,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver dai_component = {
|
|
.name = "soundwire",
|
|
.probe = intel_component_probe,
|
|
.suspend = intel_component_dais_suspend,
|
|
.legacy_dai_naming = 1,
|
|
};
|
|
|
|
static int intel_create_dai(struct sdw_cdns *cdns,
|
|
struct snd_soc_dai_driver *dais,
|
|
enum intel_pdi_type type,
|
|
u32 num, u32 off, u32 max_ch)
|
|
{
|
|
int i;
|
|
|
|
if (num == 0)
|
|
return 0;
|
|
|
|
/* TODO: Read supported rates/formats from hardware */
|
|
for (i = off; i < (off + num); i++) {
|
|
dais[i].name = devm_kasprintf(cdns->dev, GFP_KERNEL,
|
|
"SDW%d Pin%d",
|
|
cdns->instance, i);
|
|
if (!dais[i].name)
|
|
return -ENOMEM;
|
|
|
|
if (type == INTEL_PDI_BD || type == INTEL_PDI_OUT) {
|
|
dais[i].playback.channels_min = 1;
|
|
dais[i].playback.channels_max = max_ch;
|
|
dais[i].playback.rates = SNDRV_PCM_RATE_48000;
|
|
dais[i].playback.formats = SNDRV_PCM_FMTBIT_S16_LE;
|
|
}
|
|
|
|
if (type == INTEL_PDI_BD || type == INTEL_PDI_IN) {
|
|
dais[i].capture.channels_min = 1;
|
|
dais[i].capture.channels_max = max_ch;
|
|
dais[i].capture.rates = SNDRV_PCM_RATE_48000;
|
|
dais[i].capture.formats = SNDRV_PCM_FMTBIT_S16_LE;
|
|
}
|
|
|
|
dais[i].ops = &intel_pcm_dai_ops;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intel_register_dai(struct sdw_intel *sdw)
|
|
{
|
|
struct sdw_cdns_stream_config config;
|
|
struct sdw_cdns *cdns = &sdw->cdns;
|
|
struct sdw_cdns_streams *stream;
|
|
struct snd_soc_dai_driver *dais;
|
|
int num_dai, ret, off = 0;
|
|
|
|
/* Read the PDI config and initialize cadence PDI */
|
|
intel_pdi_init(sdw, &config);
|
|
ret = sdw_cdns_pdi_init(cdns, config);
|
|
if (ret)
|
|
return ret;
|
|
|
|
intel_pdi_ch_update(sdw);
|
|
|
|
/* DAIs are created based on total number of PDIs supported */
|
|
num_dai = cdns->pcm.num_pdi;
|
|
|
|
dais = devm_kcalloc(cdns->dev, num_dai, sizeof(*dais), GFP_KERNEL);
|
|
if (!dais)
|
|
return -ENOMEM;
|
|
|
|
/* Create PCM DAIs */
|
|
stream = &cdns->pcm;
|
|
|
|
ret = intel_create_dai(cdns, dais, INTEL_PDI_IN, cdns->pcm.num_in,
|
|
off, stream->num_ch_in);
|
|
if (ret)
|
|
return ret;
|
|
|
|
off += cdns->pcm.num_in;
|
|
ret = intel_create_dai(cdns, dais, INTEL_PDI_OUT, cdns->pcm.num_out,
|
|
off, stream->num_ch_out);
|
|
if (ret)
|
|
return ret;
|
|
|
|
off += cdns->pcm.num_out;
|
|
ret = intel_create_dai(cdns, dais, INTEL_PDI_BD, cdns->pcm.num_bd,
|
|
off, stream->num_ch_bd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return devm_snd_soc_register_component(cdns->dev, &dai_component,
|
|
dais, num_dai);
|
|
}
|
|
|
|
static int intel_start_bus(struct sdw_intel *sdw)
|
|
{
|
|
struct device *dev = sdw->cdns.dev;
|
|
struct sdw_cdns *cdns = &sdw->cdns;
|
|
struct sdw_bus *bus = &cdns->bus;
|
|
int ret;
|
|
|
|
ret = sdw_cdns_enable_interrupt(cdns, true);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: cannot enable interrupts: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* follow recommended programming flows to avoid timeouts when
|
|
* gsync is enabled
|
|
*/
|
|
if (bus->multi_link)
|
|
intel_shim_sync_arm(sdw);
|
|
|
|
ret = sdw_cdns_init(cdns);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: unable to initialize Cadence IP: %d\n", __func__, ret);
|
|
goto err_interrupt;
|
|
}
|
|
|
|
ret = sdw_cdns_exit_reset(cdns);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: unable to exit bus reset sequence: %d\n", __func__, ret);
|
|
goto err_interrupt;
|
|
}
|
|
|
|
if (bus->multi_link) {
|
|
ret = intel_shim_sync_go(sdw);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: sync go failed: %d\n", __func__, ret);
|
|
goto err_interrupt;
|
|
}
|
|
}
|
|
sdw_cdns_check_self_clearing_bits(cdns, __func__,
|
|
true, INTEL_MASTER_RESET_ITERATIONS);
|
|
|
|
return 0;
|
|
|
|
err_interrupt:
|
|
sdw_cdns_enable_interrupt(cdns, false);
|
|
return ret;
|
|
}
|
|
|
|
static int intel_start_bus_after_reset(struct sdw_intel *sdw)
|
|
{
|
|
struct device *dev = sdw->cdns.dev;
|
|
struct sdw_cdns *cdns = &sdw->cdns;
|
|
struct sdw_bus *bus = &cdns->bus;
|
|
bool clock_stop0;
|
|
int status;
|
|
int ret;
|
|
|
|
/*
|
|
* An exception condition occurs for the CLK_STOP_BUS_RESET
|
|
* case if one or more masters remain active. In this condition,
|
|
* all the masters are powered on for they are in the same power
|
|
* domain. Master can preserve its context for clock stop0, so
|
|
* there is no need to clear slave status and reset bus.
|
|
*/
|
|
clock_stop0 = sdw_cdns_is_clock_stop(&sdw->cdns);
|
|
|
|
if (!clock_stop0) {
|
|
|
|
/*
|
|
* make sure all Slaves are tagged as UNATTACHED and
|
|
* provide reason for reinitialization
|
|
*/
|
|
|
|
status = SDW_UNATTACH_REQUEST_MASTER_RESET;
|
|
sdw_clear_slave_status(bus, status);
|
|
|
|
ret = sdw_cdns_enable_interrupt(cdns, true);
|
|
if (ret < 0) {
|
|
dev_err(dev, "cannot enable interrupts during resume\n");
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* follow recommended programming flows to avoid
|
|
* timeouts when gsync is enabled
|
|
*/
|
|
if (bus->multi_link)
|
|
intel_shim_sync_arm(sdw);
|
|
|
|
/*
|
|
* Re-initialize the IP since it was powered-off
|
|
*/
|
|
sdw_cdns_init(&sdw->cdns);
|
|
|
|
} else {
|
|
ret = sdw_cdns_enable_interrupt(cdns, true);
|
|
if (ret < 0) {
|
|
dev_err(dev, "cannot enable interrupts during resume\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = sdw_cdns_clock_restart(cdns, !clock_stop0);
|
|
if (ret < 0) {
|
|
dev_err(dev, "unable to restart clock during resume\n");
|
|
goto err_interrupt;
|
|
}
|
|
|
|
if (!clock_stop0) {
|
|
ret = sdw_cdns_exit_reset(cdns);
|
|
if (ret < 0) {
|
|
dev_err(dev, "unable to exit bus reset sequence during resume\n");
|
|
goto err_interrupt;
|
|
}
|
|
|
|
if (bus->multi_link) {
|
|
ret = intel_shim_sync_go(sdw);
|
|
if (ret < 0) {
|
|
dev_err(sdw->cdns.dev, "sync go failed during resume\n");
|
|
goto err_interrupt;
|
|
}
|
|
}
|
|
}
|
|
sdw_cdns_check_self_clearing_bits(cdns, __func__, true, INTEL_MASTER_RESET_ITERATIONS);
|
|
|
|
return 0;
|
|
|
|
err_interrupt:
|
|
sdw_cdns_enable_interrupt(cdns, false);
|
|
return ret;
|
|
}
|
|
|
|
static void intel_check_clock_stop(struct sdw_intel *sdw)
|
|
{
|
|
struct device *dev = sdw->cdns.dev;
|
|
bool clock_stop0;
|
|
|
|
clock_stop0 = sdw_cdns_is_clock_stop(&sdw->cdns);
|
|
if (!clock_stop0)
|
|
dev_err(dev, "%s: invalid configuration, clock was not stopped\n", __func__);
|
|
}
|
|
|
|
static int intel_start_bus_after_clock_stop(struct sdw_intel *sdw)
|
|
{
|
|
struct device *dev = sdw->cdns.dev;
|
|
struct sdw_cdns *cdns = &sdw->cdns;
|
|
int ret;
|
|
|
|
ret = sdw_cdns_enable_interrupt(cdns, true);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: cannot enable interrupts: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = sdw_cdns_clock_restart(cdns, false);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: unable to restart clock: %d\n", __func__, ret);
|
|
sdw_cdns_enable_interrupt(cdns, false);
|
|
return ret;
|
|
}
|
|
|
|
sdw_cdns_check_self_clearing_bits(cdns, "intel_resume_runtime no_quirks",
|
|
true, INTEL_MASTER_RESET_ITERATIONS);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intel_stop_bus(struct sdw_intel *sdw, bool clock_stop)
|
|
{
|
|
struct device *dev = sdw->cdns.dev;
|
|
struct sdw_cdns *cdns = &sdw->cdns;
|
|
bool wake_enable = false;
|
|
int ret;
|
|
|
|
if (clock_stop) {
|
|
ret = sdw_cdns_clock_stop(cdns, true);
|
|
if (ret < 0)
|
|
dev_err(dev, "%s: cannot stop clock: %d\n", __func__, ret);
|
|
else
|
|
wake_enable = true;
|
|
}
|
|
|
|
ret = sdw_cdns_enable_interrupt(cdns, false);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: cannot disable interrupts: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = intel_link_power_down(sdw);
|
|
if (ret) {
|
|
dev_err(dev, "%s: Link power down failed: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
intel_shim_wake(sdw, wake_enable);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sdw_master_read_intel_prop(struct sdw_bus *bus)
|
|
{
|
|
struct sdw_master_prop *prop = &bus->prop;
|
|
struct fwnode_handle *link;
|
|
char name[32];
|
|
u32 quirk_mask;
|
|
|
|
/* Find master handle */
|
|
snprintf(name, sizeof(name),
|
|
"mipi-sdw-link-%d-subproperties", bus->link_id);
|
|
|
|
link = device_get_named_child_node(bus->dev, name);
|
|
if (!link) {
|
|
dev_err(bus->dev, "Master node %s not found\n", name);
|
|
return -EIO;
|
|
}
|
|
|
|
fwnode_property_read_u32(link,
|
|
"intel-sdw-ip-clock",
|
|
&prop->mclk_freq);
|
|
|
|
/* the values reported by BIOS are the 2x clock, not the bus clock */
|
|
prop->mclk_freq /= 2;
|
|
|
|
fwnode_property_read_u32(link,
|
|
"intel-quirk-mask",
|
|
&quirk_mask);
|
|
|
|
if (quirk_mask & SDW_INTEL_QUIRK_MASK_BUS_DISABLE)
|
|
prop->hw_disabled = true;
|
|
|
|
prop->quirks = SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH |
|
|
SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intel_prop_read(struct sdw_bus *bus)
|
|
{
|
|
/* Initialize with default handler to read all DisCo properties */
|
|
sdw_master_read_prop(bus);
|
|
|
|
/* read Intel-specific properties */
|
|
sdw_master_read_intel_prop(bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct sdw_master_ops sdw_intel_ops = {
|
|
.read_prop = intel_prop_read,
|
|
.override_adr = sdw_dmi_override_adr,
|
|
.xfer_msg = cdns_xfer_msg,
|
|
.xfer_msg_defer = cdns_xfer_msg_defer,
|
|
.reset_page_addr = cdns_reset_page_addr,
|
|
.set_bus_conf = cdns_bus_conf,
|
|
.pre_bank_switch = intel_pre_bank_switch,
|
|
.post_bank_switch = intel_post_bank_switch,
|
|
.read_ping_status = cdns_read_ping_status,
|
|
};
|
|
|
|
/*
|
|
* probe and init (aux_dev_id argument is required by function prototype but not used)
|
|
*/
|
|
static int intel_link_probe(struct auxiliary_device *auxdev,
|
|
const struct auxiliary_device_id *aux_dev_id)
|
|
|
|
{
|
|
struct device *dev = &auxdev->dev;
|
|
struct sdw_intel_link_dev *ldev = auxiliary_dev_to_sdw_intel_link_dev(auxdev);
|
|
struct sdw_intel *sdw;
|
|
struct sdw_cdns *cdns;
|
|
struct sdw_bus *bus;
|
|
int ret;
|
|
|
|
sdw = devm_kzalloc(dev, sizeof(*sdw), GFP_KERNEL);
|
|
if (!sdw)
|
|
return -ENOMEM;
|
|
|
|
cdns = &sdw->cdns;
|
|
bus = &cdns->bus;
|
|
|
|
sdw->instance = auxdev->id;
|
|
sdw->link_res = &ldev->link_res;
|
|
cdns->dev = dev;
|
|
cdns->registers = sdw->link_res->registers;
|
|
cdns->instance = sdw->instance;
|
|
cdns->msg_count = 0;
|
|
|
|
bus->link_id = auxdev->id;
|
|
bus->dev_num_ida_min = INTEL_DEV_NUM_IDA_MIN;
|
|
bus->clk_stop_timeout = 1;
|
|
|
|
sdw_cdns_probe(cdns);
|
|
|
|
/* Set ops */
|
|
bus->ops = &sdw_intel_ops;
|
|
|
|
/* set driver data, accessed by snd_soc_dai_get_drvdata() */
|
|
auxiliary_set_drvdata(auxdev, cdns);
|
|
|
|
/* use generic bandwidth allocation algorithm */
|
|
sdw->cdns.bus.compute_params = sdw_compute_params;
|
|
|
|
/* avoid resuming from pm_runtime suspend if it's not required */
|
|
dev_pm_set_driver_flags(dev, DPM_FLAG_SMART_SUSPEND);
|
|
|
|
ret = sdw_bus_master_add(bus, dev, dev->fwnode);
|
|
if (ret) {
|
|
dev_err(dev, "sdw_bus_master_add fail: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (bus->prop.hw_disabled)
|
|
dev_info(dev,
|
|
"SoundWire master %d is disabled, will be ignored\n",
|
|
bus->link_id);
|
|
/*
|
|
* Ignore BIOS err_threshold, it's a really bad idea when dealing
|
|
* with multiple hardware synchronized links
|
|
*/
|
|
bus->prop.err_threshold = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int intel_link_startup(struct auxiliary_device *auxdev)
|
|
{
|
|
struct device *dev = &auxdev->dev;
|
|
struct sdw_cdns *cdns = auxiliary_get_drvdata(auxdev);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_bus *bus = &cdns->bus;
|
|
int link_flags;
|
|
bool multi_link;
|
|
u32 clock_stop_quirks;
|
|
int ret;
|
|
|
|
if (bus->prop.hw_disabled) {
|
|
dev_info(dev,
|
|
"SoundWire master %d is disabled, ignoring\n",
|
|
sdw->instance);
|
|
return 0;
|
|
}
|
|
|
|
link_flags = md_flags >> (bus->link_id * 8);
|
|
multi_link = !(link_flags & SDW_INTEL_MASTER_DISABLE_MULTI_LINK);
|
|
if (!multi_link) {
|
|
dev_dbg(dev, "Multi-link is disabled\n");
|
|
} else {
|
|
/*
|
|
* hardware-based synchronization is required regardless
|
|
* of the number of segments used by a stream: SSP-based
|
|
* synchronization is gated by gsync when the multi-master
|
|
* mode is set.
|
|
*/
|
|
bus->hw_sync_min_links = 1;
|
|
}
|
|
bus->multi_link = multi_link;
|
|
|
|
/* Initialize shim, controller */
|
|
ret = intel_link_power_up(sdw);
|
|
if (ret)
|
|
goto err_init;
|
|
|
|
/* Register DAIs */
|
|
ret = intel_register_dai(sdw);
|
|
if (ret) {
|
|
dev_err(dev, "DAI registration failed: %d\n", ret);
|
|
goto err_power_up;
|
|
}
|
|
|
|
intel_debugfs_init(sdw);
|
|
|
|
/* start bus */
|
|
ret = intel_start_bus(sdw);
|
|
if (ret) {
|
|
dev_err(dev, "bus start failed: %d\n", ret);
|
|
goto err_power_up;
|
|
}
|
|
|
|
/* Enable runtime PM */
|
|
if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME)) {
|
|
pm_runtime_set_autosuspend_delay(dev,
|
|
INTEL_MASTER_SUSPEND_DELAY_MS);
|
|
pm_runtime_use_autosuspend(dev);
|
|
pm_runtime_mark_last_busy(dev);
|
|
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
}
|
|
|
|
clock_stop_quirks = sdw->link_res->clock_stop_quirks;
|
|
if (clock_stop_quirks & SDW_INTEL_CLK_STOP_NOT_ALLOWED) {
|
|
/*
|
|
* To keep the clock running we need to prevent
|
|
* pm_runtime suspend from happening by increasing the
|
|
* reference count.
|
|
* This quirk is specified by the parent PCI device in
|
|
* case of specific latency requirements. It will have
|
|
* no effect if pm_runtime is disabled by the user via
|
|
* a module parameter for testing purposes.
|
|
*/
|
|
pm_runtime_get_noresume(dev);
|
|
}
|
|
|
|
/*
|
|
* The runtime PM status of Slave devices is "Unsupported"
|
|
* until they report as ATTACHED. If they don't, e.g. because
|
|
* there are no Slave devices populated or if the power-on is
|
|
* delayed or dependent on a power switch, the Master will
|
|
* remain active and prevent its parent from suspending.
|
|
*
|
|
* Conditionally force the pm_runtime core to re-evaluate the
|
|
* Master status in the absence of any Slave activity. A quirk
|
|
* is provided to e.g. deal with Slaves that may be powered on
|
|
* with a delay. A more complete solution would require the
|
|
* definition of Master properties.
|
|
*/
|
|
if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE))
|
|
pm_runtime_idle(dev);
|
|
|
|
sdw->startup_done = true;
|
|
return 0;
|
|
|
|
err_power_up:
|
|
intel_link_power_down(sdw);
|
|
err_init:
|
|
return ret;
|
|
}
|
|
|
|
static void intel_link_remove(struct auxiliary_device *auxdev)
|
|
{
|
|
struct sdw_cdns *cdns = auxiliary_get_drvdata(auxdev);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_bus *bus = &cdns->bus;
|
|
|
|
/*
|
|
* Since pm_runtime is already disabled, we don't decrease
|
|
* the refcount when the clock_stop_quirk is
|
|
* SDW_INTEL_CLK_STOP_NOT_ALLOWED
|
|
*/
|
|
if (!bus->prop.hw_disabled) {
|
|
intel_debugfs_exit(sdw);
|
|
sdw_cdns_enable_interrupt(cdns, false);
|
|
}
|
|
sdw_bus_master_delete(bus);
|
|
}
|
|
|
|
int intel_link_process_wakeen_event(struct auxiliary_device *auxdev)
|
|
{
|
|
struct device *dev = &auxdev->dev;
|
|
struct sdw_intel *sdw;
|
|
struct sdw_bus *bus;
|
|
|
|
sdw = auxiliary_get_drvdata(auxdev);
|
|
bus = &sdw->cdns.bus;
|
|
|
|
if (bus->prop.hw_disabled || !sdw->startup_done) {
|
|
dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n",
|
|
bus->link_id);
|
|
return 0;
|
|
}
|
|
|
|
if (!intel_shim_check_wake(sdw))
|
|
return 0;
|
|
|
|
/* disable WAKEEN interrupt ASAP to prevent interrupt flood */
|
|
intel_shim_wake(sdw, false);
|
|
|
|
/*
|
|
* resume the Master, which will generate a bus reset and result in
|
|
* Slaves re-attaching and be re-enumerated. The SoundWire physical
|
|
* device which generated the wake will trigger an interrupt, which
|
|
* will in turn cause the corresponding Linux Slave device to be
|
|
* resumed and the Slave codec driver to check the status.
|
|
*/
|
|
pm_request_resume(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* PM calls
|
|
*/
|
|
|
|
static int intel_resume_child_device(struct device *dev, void *data)
|
|
{
|
|
int ret;
|
|
struct sdw_slave *slave = dev_to_sdw_dev(dev);
|
|
|
|
if (!slave->probed) {
|
|
dev_dbg(dev, "skipping device, no probed driver\n");
|
|
return 0;
|
|
}
|
|
if (!slave->dev_num_sticky) {
|
|
dev_dbg(dev, "skipping device, never detected on bus\n");
|
|
return 0;
|
|
}
|
|
|
|
ret = pm_request_resume(dev);
|
|
if (ret < 0)
|
|
dev_err(dev, "%s: pm_request_resume failed: %d\n", __func__, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused intel_pm_prepare(struct device *dev)
|
|
{
|
|
struct sdw_cdns *cdns = dev_get_drvdata(dev);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_bus *bus = &cdns->bus;
|
|
u32 clock_stop_quirks;
|
|
int ret;
|
|
|
|
if (bus->prop.hw_disabled || !sdw->startup_done) {
|
|
dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n",
|
|
bus->link_id);
|
|
return 0;
|
|
}
|
|
|
|
clock_stop_quirks = sdw->link_res->clock_stop_quirks;
|
|
|
|
if (pm_runtime_suspended(dev) &&
|
|
pm_runtime_suspended(dev->parent) &&
|
|
((clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) ||
|
|
!clock_stop_quirks)) {
|
|
/*
|
|
* if we've enabled clock stop, and the parent is suspended, the SHIM registers
|
|
* are not accessible and the shim wake cannot be disabled.
|
|
* The only solution is to resume the entire bus to full power
|
|
*/
|
|
|
|
/*
|
|
* If any operation in this block fails, we keep going since we don't want
|
|
* to prevent system suspend from happening and errors should be recoverable
|
|
* on resume.
|
|
*/
|
|
|
|
/*
|
|
* first resume the device for this link. This will also by construction
|
|
* resume the PCI parent device.
|
|
*/
|
|
ret = pm_request_resume(dev);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: pm_request_resume failed: %d\n", __func__, ret);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Continue resuming the entire bus (parent + child devices) to exit
|
|
* the clock stop mode. If there are no devices connected on this link
|
|
* this is a no-op.
|
|
* The resume to full power could have been implemented with a .prepare
|
|
* step in SoundWire codec drivers. This would however require a lot
|
|
* of code to handle an Intel-specific corner case. It is simpler in
|
|
* practice to add a loop at the link level.
|
|
*/
|
|
ret = device_for_each_child(bus->dev, NULL, intel_resume_child_device);
|
|
|
|
if (ret < 0)
|
|
dev_err(dev, "%s: intel_resume_child_device failed: %d\n", __func__, ret);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused intel_suspend(struct device *dev)
|
|
{
|
|
struct sdw_cdns *cdns = dev_get_drvdata(dev);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_bus *bus = &cdns->bus;
|
|
u32 clock_stop_quirks;
|
|
int ret;
|
|
|
|
if (bus->prop.hw_disabled || !sdw->startup_done) {
|
|
dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n",
|
|
bus->link_id);
|
|
return 0;
|
|
}
|
|
|
|
if (pm_runtime_suspended(dev)) {
|
|
dev_dbg(dev, "pm_runtime status: suspended\n");
|
|
|
|
clock_stop_quirks = sdw->link_res->clock_stop_quirks;
|
|
|
|
if ((clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) ||
|
|
!clock_stop_quirks) {
|
|
|
|
if (pm_runtime_suspended(dev->parent)) {
|
|
/*
|
|
* paranoia check: this should not happen with the .prepare
|
|
* resume to full power
|
|
*/
|
|
dev_err(dev, "%s: invalid config: parent is suspended\n", __func__);
|
|
} else {
|
|
intel_shim_wake(sdw, false);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
ret = intel_stop_bus(sdw, false);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: cannot stop bus: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused intel_suspend_runtime(struct device *dev)
|
|
{
|
|
struct sdw_cdns *cdns = dev_get_drvdata(dev);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_bus *bus = &cdns->bus;
|
|
u32 clock_stop_quirks;
|
|
int ret;
|
|
|
|
if (bus->prop.hw_disabled || !sdw->startup_done) {
|
|
dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n",
|
|
bus->link_id);
|
|
return 0;
|
|
}
|
|
|
|
clock_stop_quirks = sdw->link_res->clock_stop_quirks;
|
|
|
|
if (clock_stop_quirks & SDW_INTEL_CLK_STOP_TEARDOWN) {
|
|
ret = intel_stop_bus(sdw, false);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: cannot stop bus during teardown: %d\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
} else if (clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET || !clock_stop_quirks) {
|
|
ret = intel_stop_bus(sdw, true);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: cannot stop bus during clock_stop: %d\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
} else {
|
|
dev_err(dev, "%s clock_stop_quirks %x unsupported\n",
|
|
__func__, clock_stop_quirks);
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused intel_resume(struct device *dev)
|
|
{
|
|
struct sdw_cdns *cdns = dev_get_drvdata(dev);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_bus *bus = &cdns->bus;
|
|
int link_flags;
|
|
int ret;
|
|
|
|
if (bus->prop.hw_disabled || !sdw->startup_done) {
|
|
dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n",
|
|
bus->link_id);
|
|
return 0;
|
|
}
|
|
|
|
link_flags = md_flags >> (bus->link_id * 8);
|
|
|
|
if (pm_runtime_suspended(dev)) {
|
|
dev_dbg(dev, "pm_runtime status was suspended, forcing active\n");
|
|
|
|
/* follow required sequence from runtime_pm.rst */
|
|
pm_runtime_disable(dev);
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_mark_last_busy(dev);
|
|
pm_runtime_enable(dev);
|
|
|
|
link_flags = md_flags >> (bus->link_id * 8);
|
|
|
|
if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE))
|
|
pm_runtime_idle(dev);
|
|
}
|
|
|
|
ret = intel_link_power_up(sdw);
|
|
if (ret) {
|
|
dev_err(dev, "%s failed: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* make sure all Slaves are tagged as UNATTACHED and provide
|
|
* reason for reinitialization
|
|
*/
|
|
sdw_clear_slave_status(bus, SDW_UNATTACH_REQUEST_MASTER_RESET);
|
|
|
|
ret = intel_start_bus(sdw);
|
|
if (ret < 0) {
|
|
dev_err(dev, "cannot start bus during resume\n");
|
|
intel_link_power_down(sdw);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* after system resume, the pm_runtime suspend() may kick in
|
|
* during the enumeration, before any children device force the
|
|
* master device to remain active. Using pm_runtime_get()
|
|
* routines is not really possible, since it'd prevent the
|
|
* master from suspending.
|
|
* A reasonable compromise is to update the pm_runtime
|
|
* counters and delay the pm_runtime suspend by several
|
|
* seconds, by when all enumeration should be complete.
|
|
*/
|
|
pm_runtime_mark_last_busy(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused intel_resume_runtime(struct device *dev)
|
|
{
|
|
struct sdw_cdns *cdns = dev_get_drvdata(dev);
|
|
struct sdw_intel *sdw = cdns_to_intel(cdns);
|
|
struct sdw_bus *bus = &cdns->bus;
|
|
u32 clock_stop_quirks;
|
|
int ret;
|
|
|
|
if (bus->prop.hw_disabled || !sdw->startup_done) {
|
|
dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n",
|
|
bus->link_id);
|
|
return 0;
|
|
}
|
|
|
|
/* unconditionally disable WAKEEN interrupt */
|
|
intel_shim_wake(sdw, false);
|
|
|
|
clock_stop_quirks = sdw->link_res->clock_stop_quirks;
|
|
|
|
if (clock_stop_quirks & SDW_INTEL_CLK_STOP_TEARDOWN) {
|
|
ret = intel_link_power_up(sdw);
|
|
if (ret) {
|
|
dev_err(dev, "%s: power_up failed after teardown: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* make sure all Slaves are tagged as UNATTACHED and provide
|
|
* reason for reinitialization
|
|
*/
|
|
sdw_clear_slave_status(bus, SDW_UNATTACH_REQUEST_MASTER_RESET);
|
|
|
|
ret = intel_start_bus(sdw);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: cannot start bus after teardown: %d\n", __func__, ret);
|
|
intel_link_power_down(sdw);
|
|
return ret;
|
|
}
|
|
|
|
|
|
} else if (clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) {
|
|
ret = intel_link_power_up(sdw);
|
|
if (ret) {
|
|
dev_err(dev, "%s: power_up failed after bus reset: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = intel_start_bus_after_reset(sdw);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: cannot start bus after reset: %d\n", __func__, ret);
|
|
intel_link_power_down(sdw);
|
|
return ret;
|
|
}
|
|
} else if (!clock_stop_quirks) {
|
|
|
|
intel_check_clock_stop(sdw);
|
|
|
|
ret = intel_link_power_up(sdw);
|
|
if (ret) {
|
|
dev_err(dev, "%s: power_up failed: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = intel_start_bus_after_clock_stop(sdw);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: cannot start bus after clock stop: %d\n", __func__, ret);
|
|
intel_link_power_down(sdw);
|
|
return ret;
|
|
}
|
|
} else {
|
|
dev_err(dev, "%s: clock_stop_quirks %x unsupported\n",
|
|
__func__, clock_stop_quirks);
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dev_pm_ops intel_pm = {
|
|
.prepare = intel_pm_prepare,
|
|
SET_SYSTEM_SLEEP_PM_OPS(intel_suspend, intel_resume)
|
|
SET_RUNTIME_PM_OPS(intel_suspend_runtime, intel_resume_runtime, NULL)
|
|
};
|
|
|
|
static const struct auxiliary_device_id intel_link_id_table[] = {
|
|
{ .name = "soundwire_intel.link" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(auxiliary, intel_link_id_table);
|
|
|
|
static struct auxiliary_driver sdw_intel_drv = {
|
|
.probe = intel_link_probe,
|
|
.remove = intel_link_remove,
|
|
.driver = {
|
|
/* auxiliary_driver_register() sets .name to be the modname */
|
|
.pm = &intel_pm,
|
|
},
|
|
.id_table = intel_link_id_table
|
|
};
|
|
module_auxiliary_driver(sdw_intel_drv);
|
|
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
MODULE_DESCRIPTION("Intel Soundwire Link Driver");
|