iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/ata
History
Tejun Heo 6ad6019553 libahci: fix result_tf handling after an ATA PIO data-in command 
ATA devices don't send D2H Reg FIS after an successful ATA PIO data-in
command.  The host is supposed to take the TF and E_Status of the
preceding PIO Setup FIS.  Update ahci_qc_fill_rtf() such that it takes
TF + E_Status from PIO Setup FIS after a successful ATA PIO data-in
command.

Without this patch, result_tf for such a command is filled with the
content of the previous D2H Reg FIS which belongs to a previous
command, which can make the command incorrectly seen as failed.

* Patch updated to grab the whole TF + E_Status from PIO Setup FIS
  instead of just E_Status as suggested by Robert Hancock.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mark Lord <kernel@teksavvy.com>
Cc: Robert Hancock <hancockrwd@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21 21:17:00 -04:00
..
ahci_platform.c
libata: reimplement link power management
2010-10-21 20:21:04 -04:00
ahci.c
libata: reimplement link power management
2010-10-21 20:21:04 -04:00
ahci.h
libahci: fix result_tf handling after an ATA PIO data-in command
2010-10-21 21:17:00 -04:00
ata_generic.c
ata: Intel IDE-R support
2010-10-21 20:21:05 -04:00
ata_piix.c
ata_piix: Add device ID for ICH4-L
2010-10-21 20:21:05 -04:00
Kconfig
libata: remove no longer needed pata_winbond driver
2010-08-25 19:24:15 -04:00
libahci.c
libahci: fix result_tf handling after an ATA PIO data-in command
2010-10-21 21:17:00 -04:00
libata-acpi.c
gcc-4.6: ACPI: fix unused but set variables in ACPI
2010-08-15 00:53:08 -04:00
libata-core.c
libata: implement cross-port EH exclusion
2010-10-21 20:21:05 -04:00
libata-eh.c
libata: implement cross-port EH exclusion
2010-10-21 20:21:05 -04:00
libata-pmp.c
libata: implement LPM support for port multipliers
2010-10-21 20:21:04 -04:00
libata-scsi.c
libata: Signal that our SATL supports WRITE SAME(16) with UNMAP
2010-10-21 20:21:05 -04:00
libata-sff.c
libata: add @ap to ata_wait_register() and introduce ata_msleep()
2010-10-21 20:21:05 -04:00
libata-transport.c
drivers/ata/libata-transport.c: include linux/slab.h
2010-10-21 20:21:04 -04:00
libata-transport.h
[libata] Add ATA transport class
2010-10-21 20:21:03 -04:00
libata.h
libata: implement cross-port EH exclusion
2010-10-21 20:21:05 -04:00
Makefile
[libata] Add ATA transport class
2010-10-21 20:21:03 -04:00
pata_acpi.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_ali.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_amd.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_artop.c
pata_artop: Fix device ID parity check
2010-09-09 14:19:18 -04:00
pata_at32.c
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
2010-03-30 22:02:32 +09:00
pata_at91.c
libata-sff: clean up BMDMA initialization
2010-05-19 13:32:19 -04:00
pata_atiixp.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_atp867x.c
libata-sff: separate out BMDMA irq handler
2010-05-25 19:40:24 -04:00
pata_bf54x.c
libata: add @ap to ata_wait_register() and introduce ata_msleep()
2010-10-21 20:21:05 -04:00
pata_cmd64x.c
pata_cmd64x: revert commit d62f5576
2010-08-25 19:24:15 -04:00
pata_cmd640.c
pata_cmd640: implement sff_irq_check() method
2010-10-21 20:21:05 -04:00
pata_cs5520.c
libata-sff: separate out BMDMA irq handler
2010-05-25 19:40:24 -04:00
pata_cs5530.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_cs5535.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_cs5536.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_cypress.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_efar.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_hpt3x2n.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_hpt3x3.c
libata-sff: separate out BMDMA irq handler
2010-05-25 19:40:24 -04:00
pata_hpt37x.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_hpt366.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_icside.c
libata-sff: separate out BMDMA irq handler
2010-05-25 19:40:24 -04:00
pata_isapnp.c
[libata] Improve timeout handling
2009-03-24 22:52:39 -04:00
pata_it821x.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_it8213.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_ixp4xx_cf.c
dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)
2009-04-07 08:31:11 -07:00
pata_jmicron.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_legacy.c
libata: remove no longer needed pata_winbond driver
2010-08-25 19:24:15 -04:00
pata_macio.c
powerpc/macio: Fix probing of macio devices by using the right of match table
2010-06-02 17:50:38 +10:00
pata_marvell.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_mpc52xx.c
of/device: Replace struct of_device with struct platform_device
2010-08-06 09:25:50 -06:00
pata_mpiix.c
[libata] convert drivers to use ata.h mode mask defines
2009-03-24 22:13:27 -04:00
pata_netcell.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_ninja32.c
libata-sff: separate out BMDMA irq handler
2010-05-25 19:40:24 -04:00
pata_ns87410.c
libata: Pass host flags into the pci helper
2010-03-01 14:58:46 -05:00
pata_ns87415.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_octeon_cf.c
libata-sff: kill dummy BMDMA ops from sata_qstor and pata_octeon_cf
2010-05-25 19:40:45 -04:00
pata_of_platform.c
of/device: Replace struct of_device with struct platform_device
2010-08-06 09:25:50 -06:00
pata_oldpiix.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_opti.c
libata: Pass host flags into the pci helper
2010-03-01 14:58:46 -05:00
pata_optidma.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_palmld.c
[ARM] 5522/1: PalmLD: IDE support
2009-05-31 14:50:40 +01:00
pata_pcmcia.c
pcmcia: do not use io_req_t when calling pcmcia_request_io()
2010-08-03 09:04:11 +02:00
pata_pdc202xx_old.c
pata_pdc202xx_old: implement sff_irq_check() method
2010-10-21 20:21:06 -04:00
pata_pdc2027x.c
libata-sff: separate out BMDMA irq handler
2010-05-25 19:40:24 -04:00
pata_piccolo.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_platform.c
libata-sff: clean up BMDMA initialization
2010-05-19 13:32:19 -04:00
pata_pxa.c
[ARM] pata_pxa: DMA-capable PATA driver
2010-06-18 15:07:32 +08:00
pata_qdi.c
[libata] convert drivers to use ata.h mode mask defines
2009-03-24 22:13:27 -04:00
pata_radisys.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_rb532_cf.c
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
2010-03-30 22:02:32 +09:00
pata_rdc.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_rz1000.c
libata: Pass host flags into the pci helper
2010-03-01 14:58:46 -05:00
pata_samsung_cf.c
libata: add @ap to ata_wait_register() and introduce ata_msleep()
2010-10-21 20:21:05 -04:00
pata_sc1200.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_scc.c
libata: add @ap to ata_wait_register() and introduce ata_msleep()
2010-10-21 20:21:05 -04:00
pata_sch.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_serverworks.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_sil680.c
pata_sil680: implement sff_irq_check() method
2010-10-21 20:21:06 -04:00
pata_sis.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_sl82c105.c
pata_sl82c105: implement sff_irq_check() method
2010-10-21 20:21:06 -04:00
pata_triflex.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_via.c
libata,pata_via: revert ata_wait_idle() removal from ata_sff/via_tf_load()
2010-09-09 22:27:44 -04:00
pdc_adma.c
libata-sff: ata_sff_[dumb_]qc_prep are BMDMA specific
2010-05-19 13:36:50 -04:00
sata_dwc_460ex.c
[libata] sata_dwc_460ex: signdness bug
2010-08-25 19:24:16 -04:00
sata_fsl.c
libata: add @ap to ata_wait_register() and introduce ata_msleep()
2010-10-21 20:21:05 -04:00
sata_inic162x.c
libata: add @ap to ata_wait_register() and introduce ata_msleep()
2010-10-21 20:21:05 -04:00
sata_mv.c
libata: always use ata_qc_complete_multiple() for NCQ command completions
2010-10-21 20:21:03 -04:00
sata_nv.c
libata: always use ata_qc_complete_multiple() for NCQ command completions
2010-10-21 20:21:03 -04:00
sata_promise.c
libata-sff: prd is BMDMA specific
2010-05-19 13:38:54 -04:00
sata_promise.h
libata annotations and fixes
2008-01-23 05:24:15 -05:00
sata_qstor.c
libata-sff: kill dummy BMDMA ops from sata_qstor and pata_octeon_cf
2010-05-25 19:40:45 -04:00
sata_sil24.c
libata: add @ap to ata_wait_register() and introduce ata_msleep()
2010-10-21 20:21:05 -04:00
sata_sil.c
libata-sff: ata_sff_irq_clear() is BMDMA specific
2010-05-25 19:40:19 -04:00
sata_sis.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
sata_svw.c
libata-sff: separate out BMDMA irq handler
2010-05-25 19:40:24 -04:00
sata_sx4.c
libata-sff: separate out BMDMA EH
2010-05-19 13:36:46 -04:00
sata_uli.c
libata-sff: separate out BMDMA irq handler
2010-05-25 19:40:24 -04:00
sata_via.c
libata: add @ap to ata_wait_register() and introduce ata_msleep()
2010-10-21 20:21:05 -04:00
sata_vsc.c
libata-sff: separate out BMDMA irq handler
2010-05-25 19:40:24 -04:00
sis.h
libata: PATA-mode fixes for sis_sata
2007-07-02 10:17:42 -04:00