Matt Redfearn b2ed33a895
MIPS: pm-cps: Block system suspend when a JTAG probe is present
If a JTAG probe is connected to a MIPS cluster, then the CPC detects it
and latches the CPC.STAT_CONF.EJTAG_PROBE bit to 1. While set,
attempting to send a power-down command to a core will be blocked, and
the CPC will instead send the core to clock-off state. This can
interfere with systems fully entering a low power state where all cores,
CM, GIC, etc are powered down.

Detect that a JTAG probe is / has been connected to the cluster and
block the suspend attempt.

Attempting to suspend the system while a JTAG probe is connected now
yields:
 # echo mem > /sys/power/state
 [   11.654000] PM: Syncing filesystems ... done.
 [   11.658000] JTAG probe is connected - abort suspend
 -sh: echo: write error: Operation not permitted
 #

To restore suspend, the JTAG probe should be disconnected or put into
quiescent state. Platform code can then clear the
CPC.STAT_CONF.EJTAG_PROBE bit.

Reported-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18641/
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-09 13:53:26 +00:00
..
2017-02-13 18:57:34 +00:00
2017-11-03 09:02:30 -07:00
2017-11-03 09:02:30 -07:00
2017-11-03 09:02:30 -07:00
2017-09-06 11:01:52 +02:00
2017-01-03 16:34:34 +01:00
2018-01-10 16:47:25 +01:00
2017-09-20 10:47:12 +02:00
2016-05-09 12:00:02 +02:00
2017-11-03 09:02:30 -07:00
2017-11-15 11:36:08 -08:00
2017-08-29 15:21:55 +02:00
2014-05-24 00:07:01 +02:00