ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
350 lines
8.4 KiB
C
350 lines
8.4 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* isl29125.c - Support for Intersil ISL29125 RGB light sensor
|
|
*
|
|
* Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
|
|
*
|
|
* RGB light sensor with 16-bit channels for red, green, blue);
|
|
* 7-bit I2C slave address 0x44
|
|
*
|
|
* TODO: interrupt support, IR compensation, thresholds, 12bit
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
|
|
#define ISL29125_DRV_NAME "isl29125"
|
|
|
|
#define ISL29125_DEVICE_ID 0x00
|
|
#define ISL29125_CONF1 0x01
|
|
#define ISL29125_CONF2 0x02
|
|
#define ISL29125_CONF3 0x03
|
|
#define ISL29125_STATUS 0x08
|
|
#define ISL29125_GREEN_DATA 0x09
|
|
#define ISL29125_RED_DATA 0x0b
|
|
#define ISL29125_BLUE_DATA 0x0d
|
|
|
|
#define ISL29125_ID 0x7d
|
|
|
|
#define ISL29125_MODE_MASK GENMASK(2, 0)
|
|
#define ISL29125_MODE_PD 0x0
|
|
#define ISL29125_MODE_G 0x1
|
|
#define ISL29125_MODE_R 0x2
|
|
#define ISL29125_MODE_B 0x3
|
|
#define ISL29125_MODE_RGB 0x5
|
|
|
|
#define ISL29125_SENSING_RANGE_0 5722 /* 375 lux full range */
|
|
#define ISL29125_SENSING_RANGE_1 152590 /* 10k lux full range */
|
|
|
|
#define ISL29125_MODE_RANGE BIT(3)
|
|
|
|
#define ISL29125_STATUS_CONV BIT(1)
|
|
|
|
struct isl29125_data {
|
|
struct i2c_client *client;
|
|
u8 conf1;
|
|
/* Ensure timestamp is naturally aligned */
|
|
struct {
|
|
u16 chans[3];
|
|
s64 timestamp __aligned(8);
|
|
} scan;
|
|
};
|
|
|
|
#define ISL29125_CHANNEL(_color, _si) { \
|
|
.type = IIO_INTENSITY, \
|
|
.modified = 1, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
.channel2 = IIO_MOD_LIGHT_##_color, \
|
|
.scan_index = _si, \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.realbits = 16, \
|
|
.storagebits = 16, \
|
|
.endianness = IIO_CPU, \
|
|
}, \
|
|
}
|
|
|
|
static const struct iio_chan_spec isl29125_channels[] = {
|
|
ISL29125_CHANNEL(GREEN, 0),
|
|
ISL29125_CHANNEL(RED, 1),
|
|
ISL29125_CHANNEL(BLUE, 2),
|
|
IIO_CHAN_SOFT_TIMESTAMP(3),
|
|
};
|
|
|
|
static const struct {
|
|
u8 mode, data;
|
|
} isl29125_regs[] = {
|
|
{ISL29125_MODE_G, ISL29125_GREEN_DATA},
|
|
{ISL29125_MODE_R, ISL29125_RED_DATA},
|
|
{ISL29125_MODE_B, ISL29125_BLUE_DATA},
|
|
};
|
|
|
|
static int isl29125_read_data(struct isl29125_data *data, int si)
|
|
{
|
|
int tries = 5;
|
|
int ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
|
|
data->conf1 | isl29125_regs[si].mode);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
msleep(101);
|
|
|
|
while (tries--) {
|
|
ret = i2c_smbus_read_byte_data(data->client, ISL29125_STATUS);
|
|
if (ret < 0)
|
|
goto fail;
|
|
if (ret & ISL29125_STATUS_CONV)
|
|
break;
|
|
msleep(20);
|
|
}
|
|
|
|
if (tries < 0) {
|
|
dev_err(&data->client->dev, "data not ready\n");
|
|
ret = -EIO;
|
|
goto fail;
|
|
}
|
|
|
|
ret = i2c_smbus_read_word_data(data->client, isl29125_regs[si].data);
|
|
|
|
fail:
|
|
i2c_smbus_write_byte_data(data->client, ISL29125_CONF1, data->conf1);
|
|
return ret;
|
|
}
|
|
|
|
static int isl29125_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct isl29125_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = iio_device_claim_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
ret = isl29125_read_data(data, chan->scan_index);
|
|
iio_device_release_direct_mode(indio_dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = ret;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = 0;
|
|
if (data->conf1 & ISL29125_MODE_RANGE)
|
|
*val2 = ISL29125_SENSING_RANGE_1; /*10k lux full range*/
|
|
else
|
|
*val2 = ISL29125_SENSING_RANGE_0; /*375 lux full range*/
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int isl29125_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct isl29125_data *data = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SCALE:
|
|
if (val != 0)
|
|
return -EINVAL;
|
|
if (val2 == ISL29125_SENSING_RANGE_1)
|
|
data->conf1 |= ISL29125_MODE_RANGE;
|
|
else if (val2 == ISL29125_SENSING_RANGE_0)
|
|
data->conf1 &= ~ISL29125_MODE_RANGE;
|
|
else
|
|
return -EINVAL;
|
|
return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
|
|
data->conf1);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static irqreturn_t isl29125_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct isl29125_data *data = iio_priv(indio_dev);
|
|
int i, j = 0;
|
|
|
|
for_each_set_bit(i, indio_dev->active_scan_mask,
|
|
indio_dev->masklength) {
|
|
int ret = i2c_smbus_read_word_data(data->client,
|
|
isl29125_regs[i].data);
|
|
if (ret < 0)
|
|
goto done;
|
|
|
|
data->scan.chans[j++] = ret;
|
|
}
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
|
|
iio_get_time_ns(indio_dev));
|
|
|
|
done:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static IIO_CONST_ATTR(scale_available, "0.005722 0.152590");
|
|
|
|
static struct attribute *isl29125_attributes[] = {
|
|
&iio_const_attr_scale_available.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group isl29125_attribute_group = {
|
|
.attrs = isl29125_attributes,
|
|
};
|
|
|
|
static const struct iio_info isl29125_info = {
|
|
.read_raw = isl29125_read_raw,
|
|
.write_raw = isl29125_write_raw,
|
|
.attrs = &isl29125_attribute_group,
|
|
};
|
|
|
|
static int isl29125_buffer_postenable(struct iio_dev *indio_dev)
|
|
{
|
|
struct isl29125_data *data = iio_priv(indio_dev);
|
|
|
|
data->conf1 |= ISL29125_MODE_RGB;
|
|
return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
|
|
data->conf1);
|
|
}
|
|
|
|
static int isl29125_buffer_predisable(struct iio_dev *indio_dev)
|
|
{
|
|
struct isl29125_data *data = iio_priv(indio_dev);
|
|
|
|
data->conf1 &= ~ISL29125_MODE_MASK;
|
|
data->conf1 |= ISL29125_MODE_PD;
|
|
return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
|
|
data->conf1);
|
|
}
|
|
|
|
static const struct iio_buffer_setup_ops isl29125_buffer_setup_ops = {
|
|
.postenable = isl29125_buffer_postenable,
|
|
.predisable = isl29125_buffer_predisable,
|
|
};
|
|
|
|
static int isl29125_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct isl29125_data *data;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (indio_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data->client = client;
|
|
|
|
indio_dev->info = &isl29125_info;
|
|
indio_dev->name = ISL29125_DRV_NAME;
|
|
indio_dev->channels = isl29125_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(isl29125_channels);
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, ISL29125_DEVICE_ID);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret != ISL29125_ID)
|
|
return -ENODEV;
|
|
|
|
data->conf1 = ISL29125_MODE_PD | ISL29125_MODE_RANGE;
|
|
ret = i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
|
|
data->conf1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client, ISL29125_STATUS, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = iio_triggered_buffer_setup(indio_dev, NULL,
|
|
isl29125_trigger_handler, &isl29125_buffer_setup_ops);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret < 0)
|
|
goto buffer_cleanup;
|
|
|
|
return 0;
|
|
|
|
buffer_cleanup:
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
return ret;
|
|
}
|
|
|
|
static int isl29125_powerdown(struct isl29125_data *data)
|
|
{
|
|
return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
|
|
(data->conf1 & ~ISL29125_MODE_MASK) | ISL29125_MODE_PD);
|
|
}
|
|
|
|
static void isl29125_remove(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
isl29125_powerdown(iio_priv(indio_dev));
|
|
}
|
|
|
|
static int isl29125_suspend(struct device *dev)
|
|
{
|
|
struct isl29125_data *data = iio_priv(i2c_get_clientdata(
|
|
to_i2c_client(dev)));
|
|
return isl29125_powerdown(data);
|
|
}
|
|
|
|
static int isl29125_resume(struct device *dev)
|
|
{
|
|
struct isl29125_data *data = iio_priv(i2c_get_clientdata(
|
|
to_i2c_client(dev)));
|
|
return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
|
|
data->conf1);
|
|
}
|
|
|
|
static DEFINE_SIMPLE_DEV_PM_OPS(isl29125_pm_ops, isl29125_suspend,
|
|
isl29125_resume);
|
|
|
|
static const struct i2c_device_id isl29125_id[] = {
|
|
{ "isl29125", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, isl29125_id);
|
|
|
|
static struct i2c_driver isl29125_driver = {
|
|
.driver = {
|
|
.name = ISL29125_DRV_NAME,
|
|
.pm = pm_sleep_ptr(&isl29125_pm_ops),
|
|
},
|
|
.probe = isl29125_probe,
|
|
.remove = isl29125_remove,
|
|
.id_table = isl29125_id,
|
|
};
|
|
module_i2c_driver(isl29125_driver);
|
|
|
|
MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
|
|
MODULE_DESCRIPTION("ISL29125 RGB light sensor driver");
|
|
MODULE_LICENSE("GPL");
|