ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
251 lines
5.6 KiB
C
251 lines
5.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* tsl4531.c - Support for TAOS TSL4531 ambient light sensor
|
|
*
|
|
* Copyright 2013 Peter Meerwald <pmeerw@pmeerw.net>
|
|
*
|
|
* IIO driver for the TSL4531x family
|
|
* TSL45311/TSL45313: 7-bit I2C slave address 0x39
|
|
* TSL45315/TSL45317: 7-bit I2C slave address 0x29
|
|
*
|
|
* TODO: single cycle measurement
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#define TSL4531_DRV_NAME "tsl4531"
|
|
|
|
#define TSL4531_COMMAND BIT(7)
|
|
|
|
#define TSL4531_CONTROL (TSL4531_COMMAND | 0x00)
|
|
#define TSL4531_CONFIG (TSL4531_COMMAND | 0x01)
|
|
#define TSL4531_DATA (TSL4531_COMMAND | 0x04)
|
|
#define TSL4531_ID (TSL4531_COMMAND | 0x0a)
|
|
|
|
/* operating modes in control register */
|
|
#define TSL4531_MODE_POWERDOWN 0x00
|
|
#define TSL4531_MODE_SINGLE_ADC 0x02
|
|
#define TSL4531_MODE_NORMAL 0x03
|
|
|
|
/* integration time control in config register */
|
|
#define TSL4531_TCNTRL_400MS 0x00
|
|
#define TSL4531_TCNTRL_200MS 0x01
|
|
#define TSL4531_TCNTRL_100MS 0x02
|
|
|
|
/* part number in id register */
|
|
#define TSL45311_ID 0x8
|
|
#define TSL45313_ID 0x9
|
|
#define TSL45315_ID 0xa
|
|
#define TSL45317_ID 0xb
|
|
#define TSL4531_ID_SHIFT 4
|
|
|
|
struct tsl4531_data {
|
|
struct i2c_client *client;
|
|
struct mutex lock;
|
|
int int_time;
|
|
};
|
|
|
|
static IIO_CONST_ATTR_INT_TIME_AVAIL("0.1 0.2 0.4");
|
|
|
|
static struct attribute *tsl4531_attributes[] = {
|
|
&iio_const_attr_integration_time_available.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group tsl4531_attribute_group = {
|
|
.attrs = tsl4531_attributes,
|
|
};
|
|
|
|
static const struct iio_chan_spec tsl4531_channels[] = {
|
|
{
|
|
.type = IIO_LIGHT,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_INT_TIME)
|
|
}
|
|
};
|
|
|
|
static int tsl4531_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct tsl4531_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = i2c_smbus_read_word_data(data->client,
|
|
TSL4531_DATA);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = ret;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
/* 0.. 1x, 1 .. 2x, 2 .. 4x */
|
|
*val = 1 << data->int_time;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_INT_TIME:
|
|
if (data->int_time == 0)
|
|
*val2 = 400000;
|
|
else if (data->int_time == 1)
|
|
*val2 = 200000;
|
|
else if (data->int_time == 2)
|
|
*val2 = 100000;
|
|
else
|
|
return -EINVAL;
|
|
*val = 0;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int tsl4531_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct tsl4531_data *data = iio_priv(indio_dev);
|
|
int int_time, ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_INT_TIME:
|
|
if (val != 0)
|
|
return -EINVAL;
|
|
if (val2 == 400000)
|
|
int_time = 0;
|
|
else if (val2 == 200000)
|
|
int_time = 1;
|
|
else if (val2 == 100000)
|
|
int_time = 2;
|
|
else
|
|
return -EINVAL;
|
|
mutex_lock(&data->lock);
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
TSL4531_CONFIG, int_time);
|
|
if (ret >= 0)
|
|
data->int_time = int_time;
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_info tsl4531_info = {
|
|
.read_raw = tsl4531_read_raw,
|
|
.write_raw = tsl4531_write_raw,
|
|
.attrs = &tsl4531_attribute_group,
|
|
};
|
|
|
|
static int tsl4531_check_id(struct i2c_client *client)
|
|
{
|
|
int ret = i2c_smbus_read_byte_data(client, TSL4531_ID);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
switch (ret >> TSL4531_ID_SHIFT) {
|
|
case TSL45311_ID:
|
|
case TSL45313_ID:
|
|
case TSL45315_ID:
|
|
case TSL45317_ID:
|
|
return 0;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
static int tsl4531_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct tsl4531_data *data;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data->client = client;
|
|
mutex_init(&data->lock);
|
|
|
|
ret = tsl4531_check_id(client);
|
|
if (ret) {
|
|
dev_err(&client->dev, "no TSL4531 sensor\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client, TSL4531_CONTROL,
|
|
TSL4531_MODE_NORMAL);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client, TSL4531_CONFIG,
|
|
TSL4531_TCNTRL_400MS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
indio_dev->info = &tsl4531_info;
|
|
indio_dev->channels = tsl4531_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(tsl4531_channels);
|
|
indio_dev->name = TSL4531_DRV_NAME;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
return iio_device_register(indio_dev);
|
|
}
|
|
|
|
static int tsl4531_powerdown(struct i2c_client *client)
|
|
{
|
|
return i2c_smbus_write_byte_data(client, TSL4531_CONTROL,
|
|
TSL4531_MODE_POWERDOWN);
|
|
}
|
|
|
|
static void tsl4531_remove(struct i2c_client *client)
|
|
{
|
|
iio_device_unregister(i2c_get_clientdata(client));
|
|
tsl4531_powerdown(client);
|
|
}
|
|
|
|
static int tsl4531_suspend(struct device *dev)
|
|
{
|
|
return tsl4531_powerdown(to_i2c_client(dev));
|
|
}
|
|
|
|
static int tsl4531_resume(struct device *dev)
|
|
{
|
|
return i2c_smbus_write_byte_data(to_i2c_client(dev), TSL4531_CONTROL,
|
|
TSL4531_MODE_NORMAL);
|
|
}
|
|
|
|
static DEFINE_SIMPLE_DEV_PM_OPS(tsl4531_pm_ops, tsl4531_suspend,
|
|
tsl4531_resume);
|
|
|
|
static const struct i2c_device_id tsl4531_id[] = {
|
|
{ "tsl4531", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, tsl4531_id);
|
|
|
|
static struct i2c_driver tsl4531_driver = {
|
|
.driver = {
|
|
.name = TSL4531_DRV_NAME,
|
|
.pm = pm_sleep_ptr(&tsl4531_pm_ops),
|
|
},
|
|
.probe = tsl4531_probe,
|
|
.remove = tsl4531_remove,
|
|
.id_table = tsl4531_id,
|
|
};
|
|
|
|
module_i2c_driver(tsl4531_driver);
|
|
|
|
MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
|
|
MODULE_DESCRIPTION("TAOS TSL4531 ambient light sensors driver");
|
|
MODULE_LICENSE("GPL");
|