iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/net/phy
History
Vladimir Oltean 6cbdcf25bd net: phylink: Allow 2.5BASE-T, 5GBASE-T and 10GBASE-T for the 10G link modes 
For some reason, PHYLINK does not put the copper modes for 802.3bz
(NBASE-T) and 802.3an-2006 (10GBASE-T) in the PHY's supported mask, when
the PHY-MAC connection is a 10G-capable one (10GBase-KR, 10GBase-R,
USXGMII). One possible way through which the cable side can work at the
lower speed is by having the PHY emit PAUSE frames towards the MAC. So
fix that omission.

Also include the 2500Base-X fiber mode in this list while we're at it.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20 10:06:47 +01:00
..
adin.c
net: phy: adin: fix a warning about msleep
2020-01-19 16:06:42 +01:00
amd.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
aquantia_hwmon.c
net: phy: aquantia: add hwmon support
2019-02-25 14:16:22 -08:00
aquantia_main.c
net: switch to using PHY_INTERFACE_MODE_10GBASER rather than 10GKR
2020-01-05 15:05:35 -08:00
aquantia.h
net: phy: Use the correct style for SPDX License Identifier
2019-11-27 11:25:48 -08:00
at803x.c
net: phy: at803x: remove config_init for AR9331
2019-11-06 21:42:06 -08:00
ax88796b.c
net: phy: rename Asix Electronics PHY driver
2019-06-09 13:24:17 -07:00
bcm7xxx.c
net: phy: bcm7xxx: define soft_reset for 40nm EPHY
2019-10-18 10:00:07 -07:00
bcm63xx.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
bcm87xx.c
net: phy: bcm87xx: improve bcm87xx_config_init and feature detection
2019-05-26 21:56:41 -07:00
bcm84881.c
net: switch to using PHY_INTERFACE_MODE_10GBASER rather than 10GKR
2020-01-05 15:05:35 -08:00
bcm-cygnus.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
bcm-phy-lib.c
net: phy: Prepare for moving Omega out of bcm7xxx
2019-03-21 13:41:26 -07:00
bcm-phy-lib.h
net: phy: Use the correct style for SPDX License Identifier
2019-11-27 11:25:48 -08:00
broadcom.c
net: phy: broadcom: add 1000Base-X support for BCM54616S
2019-10-23 20:42:52 -07:00
cicada.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
cortina.c
net: phy: remove gen10g_no_soft_reset
2019-03-03 21:47:57 -08:00
davicom.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
dp83tc811.c
net: phy: remove calls to genphy_config_init
2019-08-17 12:34:50 -07:00
dp83640_reg.h
…
dp83640.c
net: Introduce a new MII time stamping interface.
2019-12-25 19:51:33 -08:00
dp83822.c
net: phy: remove calls to genphy_config_init
2019-08-17 12:34:50 -07:00
dp83848.c
net: phy: remove calls to genphy_config_init
2019-08-17 12:34:50 -07:00
dp83867.c
Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net
2020-01-19 22:10:04 +01:00
dp83869.c
net: phy: dp83869: Remove unneeded semicolon
2019-12-14 16:11:40 -08:00
et1011c.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
fixed_phy.c
net: phy: fixed_phy: switch to using fwnode_gpiod_get_index
2020-01-05 14:27:01 -08:00
icplus.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
intel-xway.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
Kconfig
Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net
2020-01-19 22:10:04 +01:00
lxt.c
net: phy: provide and use genphy_read_status_fixed()
2019-12-19 12:52:34 -08:00
Makefile
net: Add a layer for non-PHY MII time stamping drivers.
2019-12-25 19:51:33 -08:00
marvell10g.c
net: switch to using PHY_INTERFACE_MODE_10GBASER rather than 10GKR
2020-01-05 15:05:35 -08:00
marvell.c
net: phy: marvell: use genphy_check_and_restart_aneg()
2019-12-19 12:52:34 -08:00
mdio_bus.c
net: phy: Maintain MDIO device and bus statistics
2020-01-17 11:12:44 +01:00
mdio_device.c
net: phy: allow for reset line to be tied to a sleepy GPIO controller
2019-10-04 18:07:45 -07:00
mdio-aspeed.c
net: phy: Add mdio-aspeed
2019-08-02 17:56:28 -07:00
mdio-bcm-iproc.c
phy: mdio-bcm-iproc: use devm_platform_ioremap_resource() to simplify code
2019-08-28 14:51:00 -07:00
mdio-bcm-unimac.c
net: phy: mdio-bcm-unimac: remove redundant !timeout check
2019-03-27 14:27:30 -07:00
mdio-bitbang.c
net: phy: Fixup GPLv2 SPDX tags based on license text
2019-01-22 20:58:40 -08:00
mdio-boardinfo.c
net: phy: Convert some PHY and MDIO driver files to SPDX headers
2019-01-22 20:53:08 -08:00
mdio-boardinfo.h
…
mdio-cavium.c
net: phy: Add SDPX tag based on COPYING file
2019-01-22 20:59:18 -08:00
mdio-cavium.h
net: phy: Use the correct style for SPDX License Identifier
2019-11-27 11:25:48 -08:00
mdio-gpio.c
net: phy: Fixup GPLv2 SPDX tags based on license text
2019-01-22 20:58:40 -08:00
mdio-hisi-femac.c
phy: mdio-hisi-femac: use devm_platform_ioremap_resource() to simplify code
2019-08-28 14:51:00 -07:00
mdio-i2c.c
net: mdio-i2c: add support for Clause 45 accesses
2019-12-11 11:53:41 -08:00
mdio-i2c.h
net: phy: Use the correct style for SPDX License Identifier
2019-11-27 11:25:48 -08:00
mdio-moxart.c
phy: mdio-moxart: use devm_platform_ioremap_resource() to simplify code
2019-08-28 14:51:00 -07:00
mdio-mscc-miim.c
drivers: net: Remove device_node checks with of_mdiobus_register()
2018-05-16 14:20:36 -04:00
mdio-mux-bcm-iproc.c
net: phy: Convert some PHY and MDIO driver files to SPDX headers
2019-01-22 20:53:08 -08:00
mdio-mux-gpio.c
net: phy: Add SDPX tag based on COPYING file
2019-01-22 20:59:18 -08:00
mdio-mux-meson-g12a.c
phy: mdio-mux-meson-g12a: use devm_platform_ioremap_resource() to simplify code
2019-08-28 14:51:00 -07:00
mdio-mux-mmioreg.c
net: phy: Convert some PHY and MDIO driver files to SPDX headers
2019-01-22 20:53:08 -08:00
mdio-mux-multiplexer.c
drivers: net: phy: mdio-mux: Add support for Generic Mux controls
2019-02-27 12:52:20 -08:00
mdio-mux.c
net: phy: Add SDPX tag based on COPYING file
2019-01-22 20:59:18 -08:00
mdio-octeon.c
net: phy: Add SDPX tag based on COPYING file
2019-01-22 20:59:18 -08:00
mdio-sun4i.c
phy: mdio-sun4i: add missed regulator_disable in remove
2019-11-18 17:22:40 -08:00
mdio-thunder.c
phy: mdio-thunder: add missed pci_release_regions in remove
2019-12-06 12:05:06 -08:00
mdio-xgene.c
net: phy: xgene: use devm_platform_ioremap_resource() to simplify code
2019-08-01 13:10:34 -04:00
mdio-xgene.h
net: phy: Use the correct style for SPDX License Identifier
2019-11-27 11:25:48 -08:00
meson-gxl.c
net: phy: remove calls to genphy_config_init
2019-08-17 12:34:50 -07:00
micrel.c
net: phy: micrel: Update KSZ87xx PHY name
2019-10-17 16:31:52 -07:00
microchip_t1.c
net: phy: remove calls to genphy_config_init
2019-08-17 12:34:50 -07:00
microchip.c
net: phy: remove calls to genphy_config_init
2019-08-17 12:34:50 -07:00
mii_timestamper.c
net: Add a layer for non-PHY MII time stamping drivers.
2019-12-25 19:51:33 -08:00
mscc_fc_buffer.h
net: phy: mscc: macsec initialization
2020-01-14 11:31:41 -08:00
mscc_mac.h
net: phy: mscc: macsec initialization
2020-01-14 11:31:41 -08:00
mscc_macsec.h
net: phy: mscc: PN rollover support
2020-01-14 11:31:41 -08:00
mscc.c
net: phy: mscc: PN rollover support
2020-01-14 11:31:41 -08:00
national.c
net/phy: fix DP83865 10 Mbps HDX loopback disable function
2019-09-21 18:21:52 -07:00
nxp-tja11xx.c
net: phy: tja11xx: Switch to HWMON_CHANNEL_INFO()
2019-05-29 22:02:18 -07:00
phy_device.c
net: phy: Added IRQ print to phylink_bringup_phy()
2020-01-14 10:56:58 -08:00
phy_led_triggers.c
net: phy: phy_led_triggers: Fix a possible null-pointer dereference in phy_led_trigger_change_speed()
2019-07-31 18:56:11 -04:00
phy-c45.c
net: phy: Fix "link partner" information disappear issue
2019-10-16 13:17:01 -07:00
phy-core.c
net: phy: add helpers phy_(un)lock_mdio_bus
2019-11-25 10:47:00 -08:00
phy.c
net: Introduce a new MII time stamping interface.
2019-12-25 19:51:33 -08:00
phylink.c
net: phylink: Allow 2.5BASE-T, 5GBASE-T and 10GBASE-T for the 10G link modes
2020-01-20 10:06:47 +01:00
qsemi.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
realtek.c
net: phy: realtek: add support for configuring the RX delay on RTL8211F
2019-12-26 13:22:17 -08:00
rockchip.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
sfp-bus.c
net: switch to using PHY_INTERFACE_MODE_10GBASER rather than 10GKR
2020-01-05 15:05:35 -08:00
sfp.c
net: sfp: report error on failure to read sfp soft status
2019-12-19 17:26:07 -08:00
sfp.h
net: sfp: add module start/stop upstream notifications
2019-12-11 11:53:41 -08:00
smsc.c
net: phy: smsc: LAN8740: add PHY_RST_AFTER_CLK_EN flag
2019-10-23 21:44:44 -07:00
spi_ks8995.c
spi: Micrel eth switch: declare missing of table
2019-04-23 10:44:44 -07:00
ste10Xp.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
swphy.c
net: phy: swphy: emulate register MII_ESTATUS
2019-08-15 11:43:48 -07:00
swphy.h
…
teranetics.c
net: phy: remove gen10g_no_soft_reset
2019-03-03 21:47:57 -08:00
uPD60620.c
net: phy: use phy_resolve_aneg_pause()
2019-12-19 12:52:34 -08:00
vitesse.c
net: phy: remove calls to genphy_config_init
2019-08-17 12:34:50 -07:00
xilinx_gmii2rgmii.c
net: phy: gmii2rgmii: Dont use priv field in phy device
2019-09-05 12:32:06 +02:00