linux/drivers/usb
Ben Dooks 6d091ee761 USB: s3c-hsotg: Increase TX fifo limit
Up the FIFO size for the TX to 1024 entries, as this now seems to work
with all the cores. This fixes a problem when using large packets on
a core with MPS set to 512 can hang due to insufficient space for the
writes.

The hang arises due to getting the non-periodic FIFO empty IRQ but
not being able to satisfy any requests since there is never enough
space to write 512 bytes into the buffer. This means we end up with
a stream of interrupt requests.

It is easier to up the TX FIFO to fill the space we left for it
than to try and fix the positions in the code where we should have
limited the max-packet size to < TXFIFOSIZE, since the TXFIFOSIZE
depends on how the TX FIFOs have been setup.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 14:35:42 -07:00
..
atm usb: atm: fixed spacing and indentation coding style issues 2010-08-10 14:35:35 -07:00
c67x00 USB: convert usb_hcd bitfields into atomic flags 2010-08-10 14:35:37 -07:00
class USB: usblp: fixed switch, brace, whitespace and spacing coding style issues 2010-08-10 14:35:38 -07:00
core USB delay init quirk for logitech Harmony 700-series devices 2010-08-10 14:35:41 -07:00
early echi-dbgp: Add kernel debugger support for the usb debug port 2010-05-20 21:04:31 -05:00
gadget USB: s3c-hsotg: Increase TX fifo limit 2010-08-10 14:35:42 -07:00
host usb: host: sl811-hcd: check kzalloc() result 2010-08-10 14:35:42 -07:00
image
misc USB: misc: Remove unnecessary casts of private_data 2010-08-10 14:35:39 -07:00
mon USB: resizing usbmon binary interface buffer causes protection faults 2010-08-10 14:35:41 -07:00
musb USB: musb: forward debug mode feature to gadget 2010-08-10 14:35:39 -07:00
otg USB: otg/ulpi: extend the generic ulpi driver. 2010-08-10 14:35:40 -07:00
serial USB: option: Huawei ETS 1220 support added 2010-08-10 14:35:41 -07:00
storage usb: storage: freecom: Fixed several coding style issues. 2010-08-10 14:35:39 -07:00
wusbcore fix typos concerning "initiali[zs]e" 2010-06-16 18:05:05 +02:00
Kconfig USB: Add JZ4740 OHCI support 2010-08-05 13:26:19 +01:00
Makefile USB: drivers/usb/Makefile: conditionally descend to 'early' 2010-08-10 14:35:38 -07:00
README
usb-skeleton.c USB: usb-skeleton: Remove unnecessary casts of private_data 2010-08-10 14:35:39 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.