5c9e4d8c84
Convert the serial modem control signals to use the gpiod APIs rather than the private platform callbacks. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
441 lines
11 KiB
C
441 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* linux/arch/arm/mach-sa1100/neponset.c
|
|
*/
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/gpio/gpio-reg.h>
|
|
#include <linux/gpio/machine.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/smc91x.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/hardware/sa1111.h>
|
|
#include <linux/sizes.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/assabet.h>
|
|
#include <mach/neponset.h>
|
|
#include <mach/irqs.h>
|
|
|
|
#define NEP_IRQ_SMC91X 0
|
|
#define NEP_IRQ_USAR 1
|
|
#define NEP_IRQ_SA1111 2
|
|
#define NEP_IRQ_NR 3
|
|
|
|
#define WHOAMI 0x00
|
|
#define LEDS 0x10
|
|
#define SWPK 0x20
|
|
#define IRR 0x24
|
|
#define KP_Y_IN 0x80
|
|
#define KP_X_OUT 0x90
|
|
#define NCR_0 0xa0
|
|
#define MDM_CTL_0 0xb0
|
|
#define MDM_CTL_1 0xb4
|
|
#define AUD_CTL 0xc0
|
|
|
|
#define IRR_ETHERNET (1 << 0)
|
|
#define IRR_USAR (1 << 1)
|
|
#define IRR_SA1111 (1 << 2)
|
|
|
|
#define NCR_NGPIO 7
|
|
#define MDM_CTL0_NGPIO 4
|
|
#define MDM_CTL1_NGPIO 6
|
|
#define AUD_NGPIO 2
|
|
|
|
extern void sa1110_mb_disable(void);
|
|
|
|
#define to_neponset_gpio_chip(x) container_of(x, struct neponset_gpio_chip, gc)
|
|
|
|
static const char *neponset_ncr_names[] = {
|
|
"gp01_off", "tp_power", "ms_power", "enet_osc",
|
|
"spi_kb_wk_up", "a0vpp", "a1vpp"
|
|
};
|
|
|
|
static const char *neponset_mdmctl0_names[] = {
|
|
"rts3", "dtr3", "rts1", "dtr1",
|
|
};
|
|
|
|
static const char *neponset_mdmctl1_names[] = {
|
|
"cts3", "dsr3", "dcd3", "cts1", "dsr1", "dcd1"
|
|
};
|
|
|
|
static const char *neponset_aud_names[] = {
|
|
"sel_1341", "mute_1341",
|
|
};
|
|
|
|
struct neponset_drvdata {
|
|
void __iomem *base;
|
|
struct platform_device *sa1111;
|
|
struct platform_device *smc91x;
|
|
unsigned irq_base;
|
|
struct gpio_chip *gpio[4];
|
|
};
|
|
|
|
static struct gpiod_lookup_table neponset_uart1_gpio_table = {
|
|
.dev_id = "sa11x0-uart.1",
|
|
.table = {
|
|
GPIO_LOOKUP("neponset-mdm-ctl0", 2, "rts", GPIO_ACTIVE_LOW),
|
|
GPIO_LOOKUP("neponset-mdm-ctl0", 3, "dtr", GPIO_ACTIVE_LOW),
|
|
GPIO_LOOKUP("neponset-mdm-ctl1", 3, "cts", GPIO_ACTIVE_LOW),
|
|
GPIO_LOOKUP("neponset-mdm-ctl1", 4, "dsr", GPIO_ACTIVE_LOW),
|
|
GPIO_LOOKUP("neponset-mdm-ctl1", 5, "dcd", GPIO_ACTIVE_LOW),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static struct gpiod_lookup_table neponset_uart3_gpio_table = {
|
|
.dev_id = "sa11x0-uart.3",
|
|
.table = {
|
|
GPIO_LOOKUP("neponset-mdm-ctl0", 0, "rts", GPIO_ACTIVE_LOW),
|
|
GPIO_LOOKUP("neponset-mdm-ctl0", 1, "dtr", GPIO_ACTIVE_LOW),
|
|
GPIO_LOOKUP("neponset-mdm-ctl1", 0, "cts", GPIO_ACTIVE_LOW),
|
|
GPIO_LOOKUP("neponset-mdm-ctl1", 1, "dsr", GPIO_ACTIVE_LOW),
|
|
GPIO_LOOKUP("neponset-mdm-ctl1", 2, "dcd", GPIO_ACTIVE_LOW),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static struct gpiod_lookup_table neponset_pcmcia_table = {
|
|
.dev_id = "1800",
|
|
.table = {
|
|
GPIO_LOOKUP("sa1111", 1, "a0vcc", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("sa1111", 0, "a1vcc", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("neponset-ncr", 5, "a0vpp", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("neponset-ncr", 6, "a1vpp", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("sa1111", 2, "b0vcc", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("sa1111", 3, "b1vcc", GPIO_ACTIVE_HIGH),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static struct neponset_drvdata *nep;
|
|
|
|
void neponset_ncr_frob(unsigned int mask, unsigned int val)
|
|
{
|
|
struct neponset_drvdata *n = nep;
|
|
unsigned long m = mask, v = val;
|
|
|
|
if (nep)
|
|
n->gpio[0]->set_multiple(n->gpio[0], &m, &v);
|
|
else
|
|
WARN(1, "nep unset\n");
|
|
}
|
|
EXPORT_SYMBOL(neponset_ncr_frob);
|
|
|
|
/*
|
|
* Install handler for Neponset IRQ. Note that we have to loop here
|
|
* since the ETHERNET and USAR IRQs are level based, and we need to
|
|
* ensure that the IRQ signal is deasserted before returning. This
|
|
* is rather unfortunate.
|
|
*/
|
|
static void neponset_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct neponset_drvdata *d = irq_desc_get_handler_data(desc);
|
|
unsigned int irr;
|
|
|
|
while (1) {
|
|
/*
|
|
* Acknowledge the parent IRQ.
|
|
*/
|
|
desc->irq_data.chip->irq_ack(&desc->irq_data);
|
|
|
|
/*
|
|
* Read the interrupt reason register. Let's have all
|
|
* active IRQ bits high. Note: there is a typo in the
|
|
* Neponset user's guide for the SA1111 IRR level.
|
|
*/
|
|
irr = readb_relaxed(d->base + IRR);
|
|
irr ^= IRR_ETHERNET | IRR_USAR;
|
|
|
|
if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0)
|
|
break;
|
|
|
|
/*
|
|
* Since there is no individual mask, we have to
|
|
* mask the parent IRQ. This is safe, since we'll
|
|
* recheck the register for any pending IRQs.
|
|
*/
|
|
if (irr & (IRR_ETHERNET | IRR_USAR)) {
|
|
desc->irq_data.chip->irq_mask(&desc->irq_data);
|
|
|
|
/*
|
|
* Ack the interrupt now to prevent re-entering
|
|
* this neponset handler. Again, this is safe
|
|
* since we'll check the IRR register prior to
|
|
* leaving.
|
|
*/
|
|
desc->irq_data.chip->irq_ack(&desc->irq_data);
|
|
|
|
if (irr & IRR_ETHERNET)
|
|
generic_handle_irq(d->irq_base + NEP_IRQ_SMC91X);
|
|
|
|
if (irr & IRR_USAR)
|
|
generic_handle_irq(d->irq_base + NEP_IRQ_USAR);
|
|
|
|
desc->irq_data.chip->irq_unmask(&desc->irq_data);
|
|
}
|
|
|
|
if (irr & IRR_SA1111)
|
|
generic_handle_irq(d->irq_base + NEP_IRQ_SA1111);
|
|
}
|
|
}
|
|
|
|
/* Yes, we really do not have any kind of masking or unmasking */
|
|
static void nochip_noop(struct irq_data *irq)
|
|
{
|
|
}
|
|
|
|
static struct irq_chip nochip = {
|
|
.name = "neponset",
|
|
.irq_ack = nochip_noop,
|
|
.irq_mask = nochip_noop,
|
|
.irq_unmask = nochip_noop,
|
|
};
|
|
|
|
static int neponset_init_gpio(struct gpio_chip **gcp,
|
|
struct device *dev, const char *label, void __iomem *reg,
|
|
unsigned num, bool in, const char *const * names)
|
|
{
|
|
struct gpio_chip *gc;
|
|
|
|
gc = gpio_reg_init(dev, reg, -1, num, label, in ? 0xffffffff : 0,
|
|
readl_relaxed(reg), names, NULL, NULL);
|
|
if (IS_ERR(gc))
|
|
return PTR_ERR(gc);
|
|
|
|
*gcp = gc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct sa1111_platform_data sa1111_info = {
|
|
.disable_devs = SA1111_DEVID_PS2_MSE,
|
|
};
|
|
|
|
static int neponset_probe(struct platform_device *dev)
|
|
{
|
|
struct neponset_drvdata *d;
|
|
struct resource *nep_res, *sa1111_res, *smc91x_res;
|
|
struct resource sa1111_resources[] = {
|
|
DEFINE_RES_MEM(0x40000000, SZ_8K),
|
|
{ .flags = IORESOURCE_IRQ },
|
|
};
|
|
struct platform_device_info sa1111_devinfo = {
|
|
.parent = &dev->dev,
|
|
.name = "sa1111",
|
|
.id = 0,
|
|
.res = sa1111_resources,
|
|
.num_res = ARRAY_SIZE(sa1111_resources),
|
|
.data = &sa1111_info,
|
|
.size_data = sizeof(sa1111_info),
|
|
.dma_mask = 0xffffffffUL,
|
|
};
|
|
struct resource smc91x_resources[] = {
|
|
DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS,
|
|
0x02000000, "smc91x-regs"),
|
|
DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS + 0x02000000,
|
|
0x02000000, "smc91x-attrib"),
|
|
{ .flags = IORESOURCE_IRQ },
|
|
};
|
|
struct smc91x_platdata smc91x_platdata = {
|
|
.flags = SMC91X_USE_8BIT | SMC91X_IO_SHIFT_2 | SMC91X_NOWAIT,
|
|
};
|
|
struct platform_device_info smc91x_devinfo = {
|
|
.parent = &dev->dev,
|
|
.name = "smc91x",
|
|
.id = 0,
|
|
.res = smc91x_resources,
|
|
.num_res = ARRAY_SIZE(smc91x_resources),
|
|
.data = &smc91x_platdata,
|
|
.size_data = sizeof(smc91x_platdata),
|
|
};
|
|
int ret, irq;
|
|
|
|
if (nep)
|
|
return -EBUSY;
|
|
|
|
irq = ret = platform_get_irq(dev, 0);
|
|
if (ret < 0)
|
|
goto err_alloc;
|
|
|
|
nep_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
|
smc91x_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
|
|
sa1111_res = platform_get_resource(dev, IORESOURCE_MEM, 2);
|
|
if (!nep_res || !smc91x_res || !sa1111_res) {
|
|
ret = -ENXIO;
|
|
goto err_alloc;
|
|
}
|
|
|
|
d = kzalloc(sizeof(*d), GFP_KERNEL);
|
|
if (!d) {
|
|
ret = -ENOMEM;
|
|
goto err_alloc;
|
|
}
|
|
|
|
d->base = ioremap(nep_res->start, SZ_4K);
|
|
if (!d->base) {
|
|
ret = -ENOMEM;
|
|
goto err_ioremap;
|
|
}
|
|
|
|
if (readb_relaxed(d->base + WHOAMI) != 0x11) {
|
|
dev_warn(&dev->dev, "Neponset board detected, but wrong ID: %02x\n",
|
|
readb_relaxed(d->base + WHOAMI));
|
|
ret = -ENODEV;
|
|
goto err_id;
|
|
}
|
|
|
|
ret = irq_alloc_descs(-1, IRQ_BOARD_START, NEP_IRQ_NR, -1);
|
|
if (ret <= 0) {
|
|
dev_err(&dev->dev, "unable to allocate %u irqs: %d\n",
|
|
NEP_IRQ_NR, ret);
|
|
if (ret == 0)
|
|
ret = -ENOMEM;
|
|
goto err_irq_alloc;
|
|
}
|
|
|
|
d->irq_base = ret;
|
|
|
|
irq_set_chip_and_handler(d->irq_base + NEP_IRQ_SMC91X, &nochip,
|
|
handle_simple_irq);
|
|
irq_clear_status_flags(d->irq_base + NEP_IRQ_SMC91X, IRQ_NOREQUEST | IRQ_NOPROBE);
|
|
irq_set_chip_and_handler(d->irq_base + NEP_IRQ_USAR, &nochip,
|
|
handle_simple_irq);
|
|
irq_clear_status_flags(d->irq_base + NEP_IRQ_USAR, IRQ_NOREQUEST | IRQ_NOPROBE);
|
|
irq_set_chip(d->irq_base + NEP_IRQ_SA1111, &nochip);
|
|
|
|
irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
|
|
irq_set_chained_handler_and_data(irq, neponset_irq_handler, d);
|
|
|
|
/* Disable GPIO 0/1 drivers so the buttons work on the Assabet */
|
|
writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0);
|
|
|
|
neponset_init_gpio(&d->gpio[0], &dev->dev, "neponset-ncr",
|
|
d->base + NCR_0, NCR_NGPIO, false,
|
|
neponset_ncr_names);
|
|
neponset_init_gpio(&d->gpio[1], &dev->dev, "neponset-mdm-ctl0",
|
|
d->base + MDM_CTL_0, MDM_CTL0_NGPIO, false,
|
|
neponset_mdmctl0_names);
|
|
neponset_init_gpio(&d->gpio[2], &dev->dev, "neponset-mdm-ctl1",
|
|
d->base + MDM_CTL_1, MDM_CTL1_NGPIO, true,
|
|
neponset_mdmctl1_names);
|
|
neponset_init_gpio(&d->gpio[3], &dev->dev, "neponset-aud-ctl",
|
|
d->base + AUD_CTL, AUD_NGPIO, false,
|
|
neponset_aud_names);
|
|
|
|
gpiod_add_lookup_table(&neponset_uart1_gpio_table);
|
|
gpiod_add_lookup_table(&neponset_uart3_gpio_table);
|
|
gpiod_add_lookup_table(&neponset_pcmcia_table);
|
|
|
|
/*
|
|
* We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately
|
|
* something on the Neponset activates this IRQ on sleep (eth?)
|
|
*/
|
|
#if 0
|
|
enable_irq_wake(irq);
|
|
#endif
|
|
|
|
dev_info(&dev->dev, "Neponset daughter board, providing IRQ%u-%u\n",
|
|
d->irq_base, d->irq_base + NEP_IRQ_NR - 1);
|
|
nep = d;
|
|
|
|
/* Ensure that the memory bus request/grant signals are setup */
|
|
sa1110_mb_disable();
|
|
|
|
sa1111_resources[0].parent = sa1111_res;
|
|
sa1111_resources[1].start = d->irq_base + NEP_IRQ_SA1111;
|
|
sa1111_resources[1].end = d->irq_base + NEP_IRQ_SA1111;
|
|
d->sa1111 = platform_device_register_full(&sa1111_devinfo);
|
|
|
|
smc91x_resources[0].parent = smc91x_res;
|
|
smc91x_resources[1].parent = smc91x_res;
|
|
smc91x_resources[2].start = d->irq_base + NEP_IRQ_SMC91X;
|
|
smc91x_resources[2].end = d->irq_base + NEP_IRQ_SMC91X;
|
|
d->smc91x = platform_device_register_full(&smc91x_devinfo);
|
|
|
|
platform_set_drvdata(dev, d);
|
|
|
|
return 0;
|
|
|
|
err_irq_alloc:
|
|
err_id:
|
|
iounmap(d->base);
|
|
err_ioremap:
|
|
kfree(d);
|
|
err_alloc:
|
|
return ret;
|
|
}
|
|
|
|
static int neponset_remove(struct platform_device *dev)
|
|
{
|
|
struct neponset_drvdata *d = platform_get_drvdata(dev);
|
|
int irq = platform_get_irq(dev, 0);
|
|
|
|
if (!IS_ERR(d->sa1111))
|
|
platform_device_unregister(d->sa1111);
|
|
if (!IS_ERR(d->smc91x))
|
|
platform_device_unregister(d->smc91x);
|
|
|
|
gpiod_remove_lookup_table(&neponset_pcmcia_table);
|
|
gpiod_remove_lookup_table(&neponset_uart3_gpio_table);
|
|
gpiod_remove_lookup_table(&neponset_uart1_gpio_table);
|
|
|
|
irq_set_chained_handler(irq, NULL);
|
|
irq_free_descs(d->irq_base, NEP_IRQ_NR);
|
|
nep = NULL;
|
|
iounmap(d->base);
|
|
kfree(d);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int neponset_resume(struct device *dev)
|
|
{
|
|
struct neponset_drvdata *d = dev_get_drvdata(dev);
|
|
int i, ret = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(d->gpio); i++) {
|
|
ret = gpio_reg_resume(d->gpio[i]);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dev_pm_ops neponset_pm_ops = {
|
|
.resume_noirq = neponset_resume,
|
|
.restore_noirq = neponset_resume,
|
|
};
|
|
#define PM_OPS &neponset_pm_ops
|
|
#else
|
|
#define PM_OPS NULL
|
|
#endif
|
|
|
|
static struct platform_driver neponset_device_driver = {
|
|
.probe = neponset_probe,
|
|
.remove = neponset_remove,
|
|
.driver = {
|
|
.name = "neponset",
|
|
.pm = PM_OPS,
|
|
},
|
|
};
|
|
|
|
static int __init neponset_init(void)
|
|
{
|
|
return platform_driver_register(&neponset_device_driver);
|
|
}
|
|
|
|
subsys_initcall(neponset_init);
|