6dec659896
The serial tty interface also supports additional input signals, that can also be evaluated within this trigger. This change is adding the following additional input sources, which could be controlled via the '/sys/class/<leds>/' sysfs interface. Explanation: DCE = Data Communication Equipment (Modem) DTE = Data Terminal Equipment (Computer) - cts: DCE is ready to accept data from the DTE (CTS = Clear To Send). If the line state is detected, the LED is switched on. If set to 0 (default), the LED will not evaluate CTS. If set to 1, the LED will evaluate CTS. - dsr: DCE is ready to receive and send data (DSR = Data Set Ready). If the line state is detected, the LED is switched on. If set to 0 (default), the LED will not evaluate DSR. If set to 1, the LED will evaluate DSR. - dcd: DTE is receiving a carrier from the DCE (DCD = Data Carrier Detect). If the line state is detected, the LED is switched on. If set to 0 (default), the LED will not evaluate DCD. If set to 1, the LED will evaluate DCD. - rng: DCE has detected an incoming ring signal on the telephone line (RNG = Ring Indicator). If the line state is detected, the LED is switched on. If set to 0 (default), the LED will not evaluate RNG. If set to 1, the LED will evaluate RNG. Also add an invert flag on LED blink, so that the LED blinks in the correct order. * If one off the new enabled input signals are evaluatet as 'enabled', and data are transmitted, then the LED should first blink 'off' and then 'on' (invert). * If all the new enabled input signals are evaluatet as 'disabled', and data are transmitted, then the LED should first blink 'on' and then 'off'. Signed-off-by: Florian Eckert <fe@dev.tdt.de> Reviewed-by: Maarten Brock <m.brock@vanmierlo.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20231127110311.3583957-5-fe@dev.tdt.de Signed-off-by: Lee Jones <lee@kernel.org>
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.