iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/mach-pxa
History
Eric Miao 6e354846e8 [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching 
dma branching is enabled by extending the current setup_frame_dma()
function to allow a 2nd set of frame/palette dma descriptors to be
used.

As a result, pxafb_dma_buff.dma_desc[], pxafb_dma_buff.pal_desc[]
and pxafb_info.fdadr[] are doubled.

This allows maximum re-use of the current dma setup code, although
the pxafb_info.fdadr[xx] for FBRx register values looks a bit odd.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29 17:59:17 +08:00
..
include/mach
[ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
2008-12-29 17:59:17 +08:00
am200epd.c
[ARM] pxa/gumstix: fix incorrect init done by am200
2008-12-17 22:51:38 +08:00
clock.c
[ARM] pxa: remove unnecessary #include of pxa2xx-gpio.h in clock.c
2008-12-02 14:42:39 +08:00
clock.h
[ARM] clocklib: Allow dynamic alias creation
2008-08-12 12:54:30 +01:00
cm-x2xx-pci.c
[ARM] 5282/1: pxa: add CM-X255 support
2008-10-07 12:05:07 +01:00
cm-x2xx-pci.h
[ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255
2008-10-07 12:05:05 +01:00
cm-x2xx.c
[ARM] pxa: convert legacy LCD setup of other boards to new one
2008-12-17 22:45:30 +08:00
cm-x255.c
[ARM] 5284/1: pxa: cm-x255: add NOR and NAND flash support
2008-10-07 12:08:14 +01:00
cm-x270.c
[ARM] 5306/1: pxa: fix build error on CM-X270
2008-10-15 12:34:48 +01:00
cm-x300.c
[ARM] pxa: move I2C pin configurations out into board specific files
2008-12-02 14:42:40 +08:00
colibri.c
[ARM] pxa/colibri: convert to use new MFP API
2008-09-26 23:43:21 +01:00
corgi_lcd.c
[ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig
2008-10-21 11:36:19 +08:00
corgi_pm.c
[ARM] corgi_lcd: fix simultaneous compilation with corgi_bl
2008-10-29 11:45:37 +08:00
corgi_ssp.c
Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"
2008-10-21 09:42:29 +08:00
corgi.c
[ARM] pxa/corgi: add physmap mapping for ROM
2008-12-02 14:43:49 +08:00
cpufreq-pxa2xx.c
[ARM] pxa: cpufreq-pxa2xx: sdram_rows detection support
2008-12-02 14:43:47 +08:00
cpufreq-pxa3xx.c
cpufreq: remove policy->governor setting in drivers initialization
2008-10-15 16:42:47 -07:00
devices.c
[ARM] pxa: add resources for incoming rtc-pxa driver
2008-12-02 14:43:47 +08:00
devices.h
[ARM] pxa: add resources for incoming rtc-pxa driver
2008-12-02 14:43:47 +08:00
dma.c
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
2008-08-07 09:55:48 +01:00
e330.c
[ARM] eseries: move UDC defs to machine files
2008-08-19 13:44:07 +01:00
e350.c
[ARM] eseries: move UDC defs to machine files
2008-08-19 13:44:07 +01:00
e400.c
[ARM] pxa: convert legacy LCD setup of other boards to new one
2008-12-17 22:45:30 +08:00
e740.c
[ARM] eseries: move UDC defs to machine files
2008-08-19 13:44:07 +01:00
e750.c
[ARM] eseries: move UDC defs to machine files
2008-08-19 13:44:07 +01:00
e800.c
[ARM] eseries: move UDC defs to machine files
2008-08-19 13:44:07 +01:00
em-x270.c
[ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
2008-10-07 19:12:57 +01:00
eseries.c
[ARM] eseries: move UDC defs to machine files
2008-08-19 13:44:07 +01:00
eseries.h
[ARM] eseries: move UDC defs to machine files
2008-08-19 13:44:07 +01:00
ezx.c
[ARM] pxa/ezx: I2C configuration
2008-12-17 22:51:39 +08:00
generic.c
[ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
2008-12-29 17:57:48 +08:00
generic.h
[ARM] pxa: better MFP low power state support for pxa25x/pxa27x
2008-09-26 23:43:20 +01:00
gpio.c
[ARM] pxa: move GPIOx_BASE and GPIO register offsets to gpio.c
2008-12-02 14:42:39 +08:00
gumstix.c
[ARM] pxa/gumstix: fix incorrect init done by am200
2008-12-17 22:51:38 +08:00
h5000.c
[ARM] pxa: add basic support for HP iPAQ h5000
2008-12-02 14:43:50 +08:00
idp.c
[ARM] pxa/idp: remove the unnecessary idp_init_irq()
2008-09-26 23:43:21 +01:00
imote2.c
[ARM] pxa: initial support for the Imote2 platform
2008-12-17 22:51:39 +08:00
irq.c
[ARM] 5233/1: Allow PXA to have ISA IRQs numbered 0-15
2008-09-01 17:13:26 +01:00
Kconfig
[ARM] pxa: initial support for the Imote2 platform
2008-12-17 22:51:39 +08:00
leds-idp.c
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
2008-08-07 09:55:48 +01:00
leds-lubbock.c
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
2008-08-07 09:55:48 +01:00
leds-mainstone.c
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
2008-08-07 09:55:48 +01:00
leds.c
[ARM] 5251/1: remove old LED support for Trizeps4 SOM
2008-10-01 22:34:34 +01:00
leds.h
fix file specification in comments
2006-10-03 23:01:26 +02:00
littleton.c
[ARM] pxa/littleton: add preliminary I2C board info (da9034 + max7320)
2008-12-17 22:52:12 +08:00
lpd270.c
[ARM] 5298/1: Drop desc_handle_irq()
2008-10-09 15:00:36 +01:00
lubbock.c
[ARM] 5298/1: Drop desc_handle_irq()
2008-10-09 15:00:36 +01:00
magician.c
[ARM] pxa: convert legacy LCD setup of other boards to new one
2008-12-17 22:45:30 +08:00
mainstone.c
[ARM] pxa: move I2C pin configurations out into board specific files
2008-12-02 14:42:40 +08:00
Makefile
[ARM] pxa: initial support for the Imote2 platform
2008-12-17 22:51:39 +08:00
Makefile.boot
Linux-2.6.12-rc2
2005-04-16 15:20:36 -07:00
mfp-pxa2xx.c
[ARM] pxa: add support for additional GPIOs on PXA26x
2008-12-02 14:42:37 +08:00
mfp-pxa3xx.c
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
2008-08-07 09:55:48 +01:00
mioa701_bootresume.S
[ARM] 5202/1: pxa: Added Mitac Mio A701 smartphone support.
2008-08-26 17:01:37 +01:00
mioa701.c
[ARM] pxa/MioA701: improve power supply sources
2008-12-02 14:43:48 +08:00
mp900.c
[ARM] 5277/1: Add basic support for MobilePro 900/c
2008-10-02 22:56:05 +01:00
palmtx.c
[ARM] 5248/1: wm97xx generic battery driver
2008-10-02 22:48:34 +01:00
palmz72.c
[ARM] 5239/1: Palm Zire 72 power management support
2008-10-09 15:12:07 +01:00
pcm027.c
[ARM] pxa/pcm027: convert to use new MFP API
2008-09-26 23:43:22 +01:00
pcm990-baseboard.c
[ARM] pxa: convert legacy LCD setup of other boards to new one
2008-12-17 22:45:30 +08:00
pm.c
[ARM] pxa: Allow platforms to override PSPR setting
2008-09-09 16:32:52 +01:00
poodle.c
[ARM] pxa/poodle: add physmap mapping for ROM
2008-12-02 14:43:49 +08:00
pwm.c
[ARM] 5303/1: period_cycles should be greater than 1
2008-10-17 13:44:47 +01:00
pxa2xx.c
Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2008-08-07 11:06:47 +01:00
pxa3xx.c
[ARM] pxa: add resources for incoming rtc-pxa driver
2008-12-02 14:43:47 +08:00
pxa25x.c
[ARM] pxa: add resources for incoming rtc-pxa driver
2008-12-02 14:43:47 +08:00
pxa27x.c
[ARM] pxa: add resources for incoming rtc-pxa driver
2008-12-02 14:43:47 +08:00
pxa300.c
[ARM] 5212/1: pxa: fix build error when CPU_PXA310 is not defined
2008-08-20 23:17:13 +01:00
pxa320.c
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
2008-08-07 09:55:48 +01:00
pxa930.c
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
2008-08-07 09:55:48 +01:00
reset.c
[ARM] 5330/1: mach-pxa: Fixup reset for systems using reboot=cold or other strings
2008-11-17 14:05:41 +00:00
saar.c
[ARM] pxa/saar: add support for the on-board smart panel LCD
2008-12-17 22:52:01 +08:00
sharpsl_pm.c
[ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig
2008-10-21 11:36:19 +08:00
sharpsl.h
[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix
2008-01-28 13:13:25 +00:00
sleep.S
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
2008-08-07 09:55:48 +01:00
smemc.c
[ARM] pxa: introduce sysdev for pxa3xx static memory controller
2008-02-04 13:17:33 +00:00
spitz_pm.c
[ARM] corgi_lcd: fix simultaneous compilation with corgi_bl
2008-10-29 11:45:37 +08:00
spitz.c
[ARM] pxa/spitz: add physmap mapping for ROM
2008-12-02 14:43:49 +08:00
ssp.c
[ARM] Convert asm/io.h to linux/io.h
2008-09-06 12:10:45 +01:00
standby.S
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
2008-08-07 09:55:48 +01:00
tavorevb.c
[ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)
2008-12-29 17:57:23 +08:00
time.c
[ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
2008-12-29 17:57:48 +08:00
tosa-bt.c
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
2008-08-07 09:55:48 +01:00
tosa.c
[ARM] pxa/tosa: add physmap mapping for ROM
2008-12-02 14:43:49 +08:00
trizeps4.c
[ARM] remove extra brace in arch/arm/mach-pxa/trizeps4.c
2008-10-18 14:24:08 +01:00
viper.c
[ARM] 5308/1: Fix Viper ISA IRQ handling
2008-10-15 13:01:36 +01:00
zylonite_pxa300.c
[ARM] pxa/zylonite: add support for USB OHCI
2008-10-07 19:12:59 +01:00
zylonite_pxa320.c
[ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h>
2008-12-02 14:42:37 +08:00
zylonite.c
[ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h>
2008-12-02 14:42:37 +08:00