linux

iv/linux

History

Sarah Sharp 7206b00164 USB: Add route string to struct usb_device.

This patch adds a hex route string to each USB device.  The route string is used
by the USB 3.0 host controller to send packets through the device tree.  USB 3.0
hubs use this string to route packets to the correct port.  This is fundamental
bus change from USB 2.0, where all packets were broadcast across the bus.

Devices (including hubs) under a root port receive the route string 0x0.  Every
four bits in the route string represent a port on a hub.  This length works
because USB 3.0 hubs are limited to 15 ports, and USB 2.0 hubs (with potentially
more ports) will never see packets with a route string.  A port number of 0
means the packet is destined for that hub.

For example, a peripheral device might have a route string of 0x00097.
This means the device is connected to port 9 of the hub at depth 1.
The hub at depth 1 is connected to port 7 of a hub at depth 0.
The hub at depth 0 is connected to a root port.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2009-06-15 21:44:48 -07:00

buffer.c

USB: pass mem_flags to dma_alloc_coherent

2009-04-23 14:15:28 -07:00

config.c

USB: Add SuperSpeed to the list of USB device speeds.

2009-06-15 21:44:48 -07:00

devices.c

USB: drivers: use USB API functions rather than constants

2009-03-24 16:20:28 -07:00

devio.c

USB: add reset endpoint operations