iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
7209d5ebb3
linux/sound/soc/codecs/rt5682-i2c.c
Uwe Kleine-König ed5c2f5fd1 i2c: Make remove callback return void 
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16 12:46:26 +02:00

345 lines
9.2 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
//
// rt5682.c -- RT5682 ALSA SoC audio component driver
//
// Copyright 2018 Realtek Semiconductor Corp.
// Author: Bard Liao <bardliao@realtek.com>
//
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/acpi.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/jack.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/initval.h>
#include <sound/tlv.h>
#include <sound/rt5682.h>
#include "rl6231.h"
#include "rt5682.h"
static const struct rt5682_platform_data i2s_default_platform_data = {
.dmic1_data_pin = RT5682_DMIC1_DATA_GPIO2,
.dmic1_clk_pin = RT5682_DMIC1_CLK_GPIO3,
.jd_src = RT5682_JD1,
.btndet_delay = 16,
.dai_clk_names[RT5682_DAI_WCLK_IDX] = "rt5682-dai-wclk",
.dai_clk_names[RT5682_DAI_BCLK_IDX] = "rt5682-dai-bclk",
};
static const struct regmap_config rt5682_regmap = {
.reg_bits = 16,
.val_bits = 16,
.max_register = RT5682_I2C_MODE,
.volatile_reg = rt5682_volatile_register,
.readable_reg = rt5682_readable_register,
.cache_type = REGCACHE_RBTREE,
.reg_defaults = rt5682_reg,
.num_reg_defaults = RT5682_REG_NUM,
.use_single_read = true,
.use_single_write = true,
};
static void rt5682_jd_check_handler(struct work_struct *work)
{
struct rt5682_priv *rt5682 = container_of(work, struct rt5682_priv,
jd_check_work.work);
if (snd_soc_component_read(rt5682->component, RT5682_AJD1_CTRL) & RT5682_JDH_RS_MASK)
/* jack out */
mod_delayed_work(system_power_efficient_wq,
&rt5682->jack_detect_work, 0);
else
schedule_delayed_work(&rt5682->jd_check_work, 500);
}
static irqreturn_t rt5682_irq(int irq, void *data)
{
struct rt5682_priv *rt5682 = data;
mod_delayed_work(system_power_efficient_wq,
&rt5682->jack_detect_work, msecs_to_jiffies(rt5682->irq_work_delay_time));
return IRQ_HANDLED;
}
static struct snd_soc_dai_driver rt5682_dai[] = {
{
.name = "rt5682-aif1",
.id = RT5682_AIF1,
.playback = {
.stream_name = "AIF1 Playback",
.channels_min = 1,
.channels_max = 2,
.rates = RT5682_STEREO_RATES,
.formats = RT5682_FORMATS,
},
.capture = {
.stream_name = "AIF1 Capture",
.channels_min = 1,
.channels_max = 2,
.rates = RT5682_STEREO_RATES,
.formats = RT5682_FORMATS,
},
.ops = &rt5682_aif1_dai_ops,
},
{
.name = "rt5682-aif2",
.id = RT5682_AIF2,
.capture = {
.stream_name = "AIF2 Capture",
.channels_min = 1,
.channels_max = 2,
.rates = RT5682_STEREO_RATES,
.formats = RT5682_FORMATS,
},
.ops = &rt5682_aif2_dai_ops,
},
};
static void rt5682_i2c_disable_regulators(void *data)
{
struct rt5682_priv *rt5682 = data;
regulator_bulk_disable(ARRAY_SIZE(rt5682->supplies), rt5682->supplies);
}
static int rt5682_i2c_probe(struct i2c_client *i2c)
{
struct rt5682_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct rt5682_priv *rt5682;
int i, ret;
unsigned int val;
rt5682 = devm_kzalloc(&i2c->dev, sizeof(struct rt5682_priv),
GFP_KERNEL);
if (!rt5682)
return -ENOMEM;
i2c_set_clientdata(i2c, rt5682);
rt5682->i2c_dev = &i2c->dev;
rt5682->pdata = i2s_default_platform_data;
if (pdata)
rt5682->pdata = *pdata;
else
rt5682_parse_dt(rt5682, &i2c->dev);
rt5682->regmap = devm_regmap_init_i2c(i2c, &rt5682_regmap);
if (IS_ERR(rt5682->regmap)) {
ret = PTR_ERR(rt5682->regmap);
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
ret);
return ret;
}
for (i = 0; i < ARRAY_SIZE(rt5682->supplies); i++)
rt5682->supplies[i].supply = rt5682_supply_names[i];
ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(rt5682->supplies),
rt5682->supplies);
if (ret) {
dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
return ret;
}
ret = devm_add_action_or_reset(&i2c->dev, rt5682_i2c_disable_regulators,
rt5682);
if (ret)
return ret;
ret = regulator_bulk_enable(ARRAY_SIZE(rt5682->supplies),
rt5682->supplies);
if (ret) {
dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
return ret;
}
if (gpio_is_valid(rt5682->pdata.ldo1_en)) {
if (devm_gpio_request_one(&i2c->dev, rt5682->pdata.ldo1_en,
GPIOF_OUT_INIT_HIGH, "rt5682"))
dev_err(&i2c->dev, "Fail gpio_request gpio_ldo\n");
}
/* Sleep for 300 ms miniumum */
usleep_range(300000, 350000);
regmap_write(rt5682->regmap, RT5682_I2C_MODE, 0x1);
usleep_range(10000, 15000);
regmap_read(rt5682->regmap, RT5682_DEVICE_ID, &val);
if (val != DEVICE_ID) {
dev_err(&i2c->dev,
"Device with ID register %x is not rt5682\n", val);
return -ENODEV;
}
mutex_init(&rt5682->calibrate_mutex);
rt5682_calibrate(rt5682);
rt5682_apply_patch_list(rt5682, &i2c->dev);
regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0000);
/* DMIC pin*/
if (rt5682->pdata.dmic1_data_pin != RT5682_DMIC1_NULL) {
switch (rt5682->pdata.dmic1_data_pin) {
case RT5682_DMIC1_DATA_GPIO2: /* share with LRCK2 */
regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1,
RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO2);
regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
RT5682_GP2_PIN_MASK, RT5682_GP2_PIN_DMIC_SDA);
break;
case RT5682_DMIC1_DATA_GPIO5: /* share with DACDAT1 */
regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1,
RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO5);
regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
RT5682_GP5_PIN_MASK, RT5682_GP5_PIN_DMIC_SDA);
break;
default:
dev_warn(&i2c->dev, "invalid DMIC_DAT pin\n");
break;
}
switch (rt5682->pdata.dmic1_clk_pin) {
case RT5682_DMIC1_CLK_GPIO1: /* share with IRQ */
regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
RT5682_GP1_PIN_MASK, RT5682_GP1_PIN_DMIC_CLK);
break;
case RT5682_DMIC1_CLK_GPIO3: /* share with BCLK2 */
regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
RT5682_GP3_PIN_MASK, RT5682_GP3_PIN_DMIC_CLK);
if (rt5682->pdata.dmic_clk_driving_high)
regmap_update_bits(rt5682->regmap,
RT5682_PAD_DRIVING_CTRL,
RT5682_PAD_DRV_GP3_MASK,
2 << RT5682_PAD_DRV_GP3_SFT);
break;
default:
dev_warn(&i2c->dev, "invalid DMIC_CLK pin\n");
break;
}
}
regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1,
RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK,
RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X);
regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0080);
regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
RT5682_GP4_PIN_MASK | RT5682_GP5_PIN_MASK,
RT5682_GP4_PIN_ADCDAT1 | RT5682_GP5_PIN_DACDAT1);
regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000);
regmap_update_bits(rt5682->regmap, RT5682_BIAS_CUR_CTRL_8,
RT5682_HPA_CP_BIAS_CTRL_MASK, RT5682_HPA_CP_BIAS_3UA);
regmap_update_bits(rt5682->regmap, RT5682_CHARGE_PUMP_1,
RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ);
regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1,
RT5682_PM_HP_MASK, RT5682_PM_HP_HV);
regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1,
RT5682_FIFO_CLK_DIV_MASK, RT5682_FIFO_CLK_DIV_2);
INIT_DELAYED_WORK(&rt5682->jack_detect_work,
rt5682_jack_detect_handler);
INIT_DELAYED_WORK(&rt5682->jd_check_work,
rt5682_jd_check_handler);
if (i2c->irq) {
ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
rt5682_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
| IRQF_ONESHOT, "rt5682", rt5682);
if (ret)
dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret);
}
#ifdef CONFIG_COMMON_CLK
/* Check if MCLK provided */
rt5682->mclk = devm_clk_get_optional(&i2c->dev, "mclk");
if (IS_ERR(rt5682->mclk))
return PTR_ERR(rt5682->mclk);
/* Register CCF DAI clock control */
ret = rt5682_register_dai_clks(rt5682);
if (ret)
return ret;
/* Initial setup for CCF */
rt5682->lrck[RT5682_AIF1] = 48000;
#endif
return devm_snd_soc_register_component(&i2c->dev,
&rt5682_soc_component_dev,
rt5682_dai, ARRAY_SIZE(rt5682_dai));
}
static void rt5682_i2c_shutdown(struct i2c_client *client)
{
struct rt5682_priv *rt5682 = i2c_get_clientdata(client);
disable_irq(client->irq);
cancel_delayed_work_sync(&rt5682->jack_detect_work);
cancel_delayed_work_sync(&rt5682->jd_check_work);
rt5682_reset(rt5682);
}
static void rt5682_i2c_remove(struct i2c_client *client)
{
rt5682_i2c_shutdown(client);
}
static const struct of_device_id rt5682_of_match[] = {
{.compatible = "realtek,rt5682i"},
{},
};
MODULE_DEVICE_TABLE(of, rt5682_of_match);
static const struct acpi_device_id rt5682_acpi_match[] = {
{"10EC5682", 0,},
{},
};
MODULE_DEVICE_TABLE(acpi, rt5682_acpi_match);
static const struct i2c_device_id rt5682_i2c_id[] = {
{"rt5682", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, rt5682_i2c_id);
static struct i2c_driver rt5682_i2c_driver = {
.driver = {
.name = "rt5682",
.of_match_table = rt5682_of_match,
.acpi_match_table = rt5682_acpi_match,
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
.probe_new = rt5682_i2c_probe,
.remove = rt5682_i2c_remove,
.shutdown = rt5682_i2c_shutdown,
.id_table = rt5682_i2c_id,
};
module_i2c_driver(rt5682_i2c_driver);
MODULE_DESCRIPTION("ASoC RT5682 driver");
MODULE_AUTHOR("Bard Liao <bardliao@realtek.com>");
MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink