linux/drivers/dma/idxd/irq.c
Dave Jiang 88d97ea82c dmaengine: idxd: add halt interrupt support
Add halt interrupt support. Given that the misc interrupt handler already
check halt state, the driver just need to run the halt handling code when
receiving the halt interrupt.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163114224352.846654.14334468363464318828.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-25 12:09:15 +05:30

276 lines
6.8 KiB
C

// SPDX-License-Identifier: GPL-2.0
/* Copyright(c) 2019 Intel Corporation. All rights rsvd. */
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/dmaengine.h>
#include <uapi/linux/idxd.h>
#include "../dmaengine.h"
#include "idxd.h"
#include "registers.h"
enum irq_work_type {
IRQ_WORK_NORMAL = 0,
IRQ_WORK_PROCESS_FAULT,
};
struct idxd_fault {
struct work_struct work;
u64 addr;
struct idxd_device *idxd;
};
static void idxd_device_reinit(struct work_struct *work)
{
struct idxd_device *idxd = container_of(work, struct idxd_device, work);
struct device *dev = &idxd->pdev->dev;
int rc, i;
idxd_device_reset(idxd);
rc = idxd_device_config(idxd);
if (rc < 0)
goto out;
rc = idxd_device_enable(idxd);
if (rc < 0)
goto out;
for (i = 0; i < idxd->max_wqs; i++) {
struct idxd_wq *wq = idxd->wqs[i];
if (wq->state == IDXD_WQ_ENABLED) {
rc = idxd_wq_enable(wq);
if (rc < 0) {
dev_warn(dev, "Unable to re-enable wq %s\n",
dev_name(wq_confdev(wq)));
}
}
}
return;
out:
idxd_device_clear_state(idxd);
}
static int process_misc_interrupts(struct idxd_device *idxd, u32 cause)
{
struct device *dev = &idxd->pdev->dev;
union gensts_reg gensts;
u32 val = 0;
int i;
bool err = false;
if (cause & IDXD_INTC_HALT_STATE)
goto halt;
if (cause & IDXD_INTC_ERR) {
spin_lock(&idxd->dev_lock);
for (i = 0; i < 4; i++)
idxd->sw_err.bits[i] = ioread64(idxd->reg_base +
IDXD_SWERR_OFFSET + i * sizeof(u64));
iowrite64(idxd->sw_err.bits[0] & IDXD_SWERR_ACK,
idxd->reg_base + IDXD_SWERR_OFFSET);
if (idxd->sw_err.valid && idxd->sw_err.wq_idx_valid) {
int id = idxd->sw_err.wq_idx;
struct idxd_wq *wq = idxd->wqs[id];
if (wq->type == IDXD_WQT_USER)
wake_up_interruptible(&wq->err_queue);
} else {
int i;
for (i = 0; i < idxd->max_wqs; i++) {
struct idxd_wq *wq = idxd->wqs[i];
if (wq->type == IDXD_WQT_USER)
wake_up_interruptible(&wq->err_queue);
}
}
spin_unlock(&idxd->dev_lock);
val |= IDXD_INTC_ERR;
for (i = 0; i < 4; i++)
dev_warn(dev, "err[%d]: %#16.16llx\n",
i, idxd->sw_err.bits[i]);
err = true;
}
if (cause & IDXD_INTC_CMD) {
val |= IDXD_INTC_CMD;
complete(idxd->cmd_done);
}
if (cause & IDXD_INTC_OCCUPY) {
/* Driver does not utilize occupancy interrupt */
val |= IDXD_INTC_OCCUPY;
}
if (cause & IDXD_INTC_PERFMON_OVFL) {
val |= IDXD_INTC_PERFMON_OVFL;
perfmon_counter_overflow(idxd);
}
val ^= cause;
if (val)
dev_warn_once(dev, "Unexpected interrupt cause bits set: %#x\n",
val);
if (!err)
return 0;
halt:
gensts.bits = ioread32(idxd->reg_base + IDXD_GENSTATS_OFFSET);
if (gensts.state == IDXD_DEVICE_STATE_HALT) {
idxd->state = IDXD_DEV_HALTED;
if (gensts.reset_type == IDXD_DEVICE_RESET_SOFTWARE) {
/*
* If we need a software reset, we will throw the work
* on a system workqueue in order to allow interrupts
* for the device command completions.
*/
INIT_WORK(&idxd->work, idxd_device_reinit);
queue_work(idxd->wq, &idxd->work);
} else {
spin_lock(&idxd->dev_lock);
idxd->state = IDXD_DEV_HALTED;
idxd_wqs_quiesce(idxd);
idxd_wqs_unmap_portal(idxd);
idxd_device_clear_state(idxd);
dev_err(&idxd->pdev->dev,
"idxd halted, need %s.\n",
gensts.reset_type == IDXD_DEVICE_RESET_FLR ?
"FLR" : "system reset");
spin_unlock(&idxd->dev_lock);
return -ENXIO;
}
}
return 0;
}
irqreturn_t idxd_misc_thread(int vec, void *data)
{
struct idxd_irq_entry *irq_entry = data;
struct idxd_device *idxd = irq_entry->idxd;
int rc;
u32 cause;
cause = ioread32(idxd->reg_base + IDXD_INTCAUSE_OFFSET);
if (cause)
iowrite32(cause, idxd->reg_base + IDXD_INTCAUSE_OFFSET);
while (cause) {
rc = process_misc_interrupts(idxd, cause);
if (rc < 0)
break;
cause = ioread32(idxd->reg_base + IDXD_INTCAUSE_OFFSET);
if (cause)
iowrite32(cause, idxd->reg_base + IDXD_INTCAUSE_OFFSET);
}
return IRQ_HANDLED;
}
static void irq_process_pending_llist(struct idxd_irq_entry *irq_entry)
{
struct idxd_desc *desc, *t;
struct llist_node *head;
head = llist_del_all(&irq_entry->pending_llist);
if (!head)
return;
llist_for_each_entry_safe(desc, t, head, llnode) {
u8 status = desc->completion->status & DSA_COMP_STATUS_MASK;
if (status) {
/*
* Check against the original status as ABORT is software defined
* and 0xff, which DSA_COMP_STATUS_MASK can mask out.
*/
if (unlikely(desc->completion->status == IDXD_COMP_DESC_ABORT)) {
complete_desc(desc, IDXD_COMPLETE_ABORT);
continue;
}
complete_desc(desc, IDXD_COMPLETE_NORMAL);
} else {
spin_lock(&irq_entry->list_lock);
list_add_tail(&desc->list,
&irq_entry->work_list);
spin_unlock(&irq_entry->list_lock);
}
}
}
static void irq_process_work_list(struct idxd_irq_entry *irq_entry)
{
LIST_HEAD(flist);
struct idxd_desc *desc, *n;
/*
* This lock protects list corruption from access of list outside of the irq handler
* thread.
*/
spin_lock(&irq_entry->list_lock);
if (list_empty(&irq_entry->work_list)) {
spin_unlock(&irq_entry->list_lock);
return;
}
list_for_each_entry_safe(desc, n, &irq_entry->work_list, list) {
if (desc->completion->status) {
list_move_tail(&desc->list, &flist);
}
}
spin_unlock(&irq_entry->list_lock);
list_for_each_entry(desc, &flist, list) {
/*
* Check against the original status as ABORT is software defined
* and 0xff, which DSA_COMP_STATUS_MASK can mask out.
*/
if (unlikely(desc->completion->status == IDXD_COMP_DESC_ABORT)) {
complete_desc(desc, IDXD_COMPLETE_ABORT);
continue;
}
complete_desc(desc, IDXD_COMPLETE_NORMAL);
}
}
irqreturn_t idxd_wq_thread(int irq, void *data)
{
struct idxd_irq_entry *irq_entry = data;
/*
* There are two lists we are processing. The pending_llist is where
* submmiter adds all the submitted descriptor after sending it to
* the workqueue. It's a lockless singly linked list. The work_list
* is the common linux double linked list. We are in a scenario of
* multiple producers and a single consumer. The producers are all
* the kernel submitters of descriptors, and the consumer is the
* kernel irq handler thread for the msix vector when using threaded
* irq. To work with the restrictions of llist to remain lockless,
* we are doing the following steps:
* 1. Iterate through the work_list and process any completed
* descriptor. Delete the completed entries during iteration.
* 2. llist_del_all() from the pending list.
* 3. Iterate through the llist that was deleted from the pending list
* and process the completed entries.
* 4. If the entry is still waiting on hardware, list_add_tail() to
* the work_list.
*/
irq_process_work_list(irq_entry);
irq_process_pending_llist(irq_entry);
return IRQ_HANDLED;
}