If the drm_plane has a source width that's greater than the max width supported by a single hw overlay, then we assign a 'r_overlay' to it in omap_plane_atomic_check(). Both overlays should have the capabilities required to handle the source framebuffer. The only parameters that vary between the left and right hwoverlays are the src_w, crtc_w, src_x and crtc_x as we just even chop the fb into left and right halves. We also take care of not creating odd width size when dealing with YUV formats. Since both halves need to be 'appear' side by side the zpos is recalculated when dealing with dual overlay cases so that the other planes zpos is consistent. Depending on user space usage it is possible that on occasion the number of requested planes exceeds the numbers of overlays required to display them. In that case a failure would be returned for the plane that cannot be handled at that time. It is up to user space to make sure the H/W resource are not over-subscribed. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-10-narmstrong@baylibre.com
949 lines
23 KiB
C
949 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
|
|
* Author: Rob Clark <rob@ti.com>
|
|
*/
|
|
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/sort.h>
|
|
#include <linux/sys_soc.h>
|
|
|
|
#include <drm/drm_atomic.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_bridge.h>
|
|
#include <drm/drm_bridge_connector.h>
|
|
#include <drm/drm_drv.h>
|
|
#include <drm/drm_fb_helper.h>
|
|
#include <drm/drm_file.h>
|
|
#include <drm/drm_ioctl.h>
|
|
#include <drm/drm_panel.h>
|
|
#include <drm/drm_prime.h>
|
|
#include <drm/drm_probe_helper.h>
|
|
#include <drm/drm_vblank.h>
|
|
|
|
#include "omap_dmm_tiler.h"
|
|
#include "omap_drv.h"
|
|
|
|
#define DRIVER_NAME MODULE_NAME
|
|
#define DRIVER_DESC "OMAP DRM"
|
|
#define DRIVER_DATE "20110917"
|
|
#define DRIVER_MAJOR 1
|
|
#define DRIVER_MINOR 0
|
|
#define DRIVER_PATCHLEVEL 0
|
|
|
|
/*
|
|
* mode config funcs
|
|
*/
|
|
|
|
/* Notes about mapping DSS and DRM entities:
|
|
* CRTC: overlay
|
|
* encoder: manager.. with some extension to allow one primary CRTC
|
|
* and zero or more video CRTC's to be mapped to one encoder?
|
|
* connector: dssdev.. manager can be attached/detached from different
|
|
* devices
|
|
*/
|
|
|
|
static void omap_atomic_wait_for_completion(struct drm_device *dev,
|
|
struct drm_atomic_state *old_state)
|
|
{
|
|
struct drm_crtc_state *new_crtc_state;
|
|
struct drm_crtc *crtc;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) {
|
|
if (!new_crtc_state->active)
|
|
continue;
|
|
|
|
ret = omap_crtc_wait_pending(crtc);
|
|
|
|
if (!ret)
|
|
dev_warn(dev->dev,
|
|
"atomic complete timeout (pipe %u)!\n", i);
|
|
}
|
|
}
|
|
|
|
static void omap_atomic_commit_tail(struct drm_atomic_state *old_state)
|
|
{
|
|
struct drm_device *dev = old_state->dev;
|
|
struct omap_drm_private *priv = dev->dev_private;
|
|
bool fence_cookie = dma_fence_begin_signalling();
|
|
|
|
dispc_runtime_get(priv->dispc);
|
|
|
|
/* Apply the atomic update. */
|
|
drm_atomic_helper_commit_modeset_disables(dev, old_state);
|
|
|
|
if (priv->omaprev != 0x3430) {
|
|
/* With the current dss dispc implementation we have to enable
|
|
* the new modeset before we can commit planes. The dispc ovl
|
|
* configuration relies on the video mode configuration been
|
|
* written into the HW when the ovl configuration is
|
|
* calculated.
|
|
*
|
|
* This approach is not ideal because after a mode change the
|
|
* plane update is executed only after the first vblank
|
|
* interrupt. The dispc implementation should be fixed so that
|
|
* it is able use uncommitted drm state information.
|
|
*/
|
|
drm_atomic_helper_commit_modeset_enables(dev, old_state);
|
|
omap_atomic_wait_for_completion(dev, old_state);
|
|
|
|
drm_atomic_helper_commit_planes(dev, old_state, 0);
|
|
} else {
|
|
/*
|
|
* OMAP3 DSS seems to have issues with the work-around above,
|
|
* resulting in endless sync losts if a crtc is enabled without
|
|
* a plane. For now, skip the WA for OMAP3.
|
|
*/
|
|
drm_atomic_helper_commit_planes(dev, old_state, 0);
|
|
|
|
drm_atomic_helper_commit_modeset_enables(dev, old_state);
|
|
}
|
|
|
|
drm_atomic_helper_commit_hw_done(old_state);
|
|
|
|
dma_fence_end_signalling(fence_cookie);
|
|
|
|
/*
|
|
* Wait for completion of the page flips to ensure that old buffers
|
|
* can't be touched by the hardware anymore before cleaning up planes.
|
|
*/
|
|
omap_atomic_wait_for_completion(dev, old_state);
|
|
|
|
drm_atomic_helper_cleanup_planes(dev, old_state);
|
|
|
|
dispc_runtime_put(priv->dispc);
|
|
}
|
|
|
|
static int drm_atomic_state_normalized_zpos_cmp(const void *a, const void *b)
|
|
{
|
|
const struct drm_plane_state *sa = *(struct drm_plane_state **)a;
|
|
const struct drm_plane_state *sb = *(struct drm_plane_state **)b;
|
|
|
|
if (sa->normalized_zpos != sb->normalized_zpos)
|
|
return sa->normalized_zpos - sb->normalized_zpos;
|
|
else
|
|
return sa->plane->base.id - sb->plane->base.id;
|
|
}
|
|
|
|
/*
|
|
* This replaces the drm_atomic_normalize_zpos to handle the dual overlay case.
|
|
*
|
|
* Since both halves need to be 'appear' side by side the zpos is
|
|
* recalculated when dealing with dual overlay cases so that the other
|
|
* planes zpos is consistent.
|
|
*/
|
|
static int omap_atomic_update_normalize_zpos(struct drm_device *dev,
|
|
struct drm_atomic_state *state)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
struct drm_crtc_state *old_state, *new_state;
|
|
struct drm_plane *plane;
|
|
int c, i, n, inc;
|
|
int total_planes = dev->mode_config.num_total_plane;
|
|
struct drm_plane_state **states;
|
|
int ret = 0;
|
|
|
|
states = kmalloc_array(total_planes, sizeof(*states), GFP_KERNEL);
|
|
if (!states)
|
|
return -ENOMEM;
|
|
|
|
for_each_oldnew_crtc_in_state(state, crtc, old_state, new_state, c) {
|
|
if (old_state->plane_mask == new_state->plane_mask &&
|
|
!new_state->zpos_changed)
|
|
continue;
|
|
|
|
/* Reset plane increment and index value for every crtc */
|
|
n = 0;
|
|
|
|
/*
|
|
* Normalization process might create new states for planes
|
|
* which normalized_zpos has to be recalculated.
|
|
*/
|
|
drm_for_each_plane_mask(plane, dev, new_state->plane_mask) {
|
|
struct drm_plane_state *plane_state =
|
|
drm_atomic_get_plane_state(new_state->state,
|
|
plane);
|
|
if (IS_ERR(plane_state)) {
|
|
ret = PTR_ERR(plane_state);
|
|
goto done;
|
|
}
|
|
states[n++] = plane_state;
|
|
}
|
|
|
|
sort(states, n, sizeof(*states),
|
|
drm_atomic_state_normalized_zpos_cmp, NULL);
|
|
|
|
for (i = 0, inc = 0; i < n; i++) {
|
|
plane = states[i]->plane;
|
|
|
|
states[i]->normalized_zpos = i + inc;
|
|
DRM_DEBUG_ATOMIC("[PLANE:%d:%s] updated normalized zpos value %d\n",
|
|
plane->base.id, plane->name,
|
|
states[i]->normalized_zpos);
|
|
|
|
if (is_omap_plane_dual_overlay(states[i]))
|
|
inc++;
|
|
}
|
|
new_state->zpos_changed = true;
|
|
}
|
|
|
|
done:
|
|
kfree(states);
|
|
return ret;
|
|
}
|
|
|
|
static int omap_atomic_check(struct drm_device *dev,
|
|
struct drm_atomic_state *state)
|
|
{
|
|
int ret;
|
|
|
|
ret = drm_atomic_helper_check(dev, state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (dev->mode_config.normalize_zpos) {
|
|
ret = omap_atomic_update_normalize_zpos(dev, state);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_mode_config_helper_funcs omap_mode_config_helper_funcs = {
|
|
.atomic_commit_tail = omap_atomic_commit_tail,
|
|
};
|
|
|
|
static const struct drm_mode_config_funcs omap_mode_config_funcs = {
|
|
.fb_create = omap_framebuffer_create,
|
|
.output_poll_changed = drm_fb_helper_output_poll_changed,
|
|
.atomic_check = omap_atomic_check,
|
|
.atomic_commit = drm_atomic_helper_commit,
|
|
};
|
|
|
|
/* Global/shared object state funcs */
|
|
|
|
/*
|
|
* This is a helper that returns the private state currently in operation.
|
|
* Note that this would return the "old_state" if called in the atomic check
|
|
* path, and the "new_state" after the atomic swap has been done.
|
|
*/
|
|
struct omap_global_state *
|
|
omap_get_existing_global_state(struct omap_drm_private *priv)
|
|
{
|
|
return to_omap_global_state(priv->glob_obj.state);
|
|
}
|
|
|
|
/*
|
|
* This acquires the modeset lock set aside for global state, creates
|
|
* a new duplicated private object state.
|
|
*/
|
|
struct omap_global_state *__must_check
|
|
omap_get_global_state(struct drm_atomic_state *s)
|
|
{
|
|
struct omap_drm_private *priv = s->dev->dev_private;
|
|
struct drm_private_state *priv_state;
|
|
|
|
priv_state = drm_atomic_get_private_obj_state(s, &priv->glob_obj);
|
|
if (IS_ERR(priv_state))
|
|
return ERR_CAST(priv_state);
|
|
|
|
return to_omap_global_state(priv_state);
|
|
}
|
|
|
|
static struct drm_private_state *
|
|
omap_global_duplicate_state(struct drm_private_obj *obj)
|
|
{
|
|
struct omap_global_state *state;
|
|
|
|
state = kmemdup(obj->state, sizeof(*state), GFP_KERNEL);
|
|
if (!state)
|
|
return NULL;
|
|
|
|
__drm_atomic_helper_private_obj_duplicate_state(obj, &state->base);
|
|
|
|
return &state->base;
|
|
}
|
|
|
|
static void omap_global_destroy_state(struct drm_private_obj *obj,
|
|
struct drm_private_state *state)
|
|
{
|
|
struct omap_global_state *omap_state = to_omap_global_state(state);
|
|
|
|
kfree(omap_state);
|
|
}
|
|
|
|
static const struct drm_private_state_funcs omap_global_state_funcs = {
|
|
.atomic_duplicate_state = omap_global_duplicate_state,
|
|
.atomic_destroy_state = omap_global_destroy_state,
|
|
};
|
|
|
|
static int omap_global_obj_init(struct drm_device *dev)
|
|
{
|
|
struct omap_drm_private *priv = dev->dev_private;
|
|
struct omap_global_state *state;
|
|
|
|
state = kzalloc(sizeof(*state), GFP_KERNEL);
|
|
if (!state)
|
|
return -ENOMEM;
|
|
|
|
drm_atomic_private_obj_init(dev, &priv->glob_obj, &state->base,
|
|
&omap_global_state_funcs);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_global_obj_fini(struct omap_drm_private *priv)
|
|
{
|
|
drm_atomic_private_obj_fini(&priv->glob_obj);
|
|
}
|
|
|
|
static void omap_disconnect_pipelines(struct drm_device *ddev)
|
|
{
|
|
struct omap_drm_private *priv = ddev->dev_private;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < priv->num_pipes; i++) {
|
|
struct omap_drm_pipeline *pipe = &priv->pipes[i];
|
|
|
|
omapdss_device_disconnect(NULL, pipe->output);
|
|
|
|
omapdss_device_put(pipe->output);
|
|
pipe->output = NULL;
|
|
}
|
|
|
|
memset(&priv->channels, 0, sizeof(priv->channels));
|
|
|
|
priv->num_pipes = 0;
|
|
}
|
|
|
|
static int omap_connect_pipelines(struct drm_device *ddev)
|
|
{
|
|
struct omap_drm_private *priv = ddev->dev_private;
|
|
struct omap_dss_device *output = NULL;
|
|
int r;
|
|
|
|
for_each_dss_output(output) {
|
|
r = omapdss_device_connect(priv->dss, NULL, output);
|
|
if (r == -EPROBE_DEFER) {
|
|
omapdss_device_put(output);
|
|
return r;
|
|
} else if (r) {
|
|
dev_warn(output->dev, "could not connect output %s\n",
|
|
output->name);
|
|
} else {
|
|
struct omap_drm_pipeline *pipe;
|
|
|
|
pipe = &priv->pipes[priv->num_pipes++];
|
|
pipe->output = omapdss_device_get(output);
|
|
|
|
if (priv->num_pipes == ARRAY_SIZE(priv->pipes)) {
|
|
/* To balance the 'for_each_dss_output' loop */
|
|
omapdss_device_put(output);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_compare_pipelines(const void *a, const void *b)
|
|
{
|
|
const struct omap_drm_pipeline *pipe1 = a;
|
|
const struct omap_drm_pipeline *pipe2 = b;
|
|
|
|
if (pipe1->alias_id > pipe2->alias_id)
|
|
return 1;
|
|
else if (pipe1->alias_id < pipe2->alias_id)
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
static int omap_modeset_init_properties(struct drm_device *dev)
|
|
{
|
|
struct omap_drm_private *priv = dev->dev_private;
|
|
unsigned int num_planes = dispc_get_num_ovls(priv->dispc);
|
|
|
|
priv->zorder_prop = drm_property_create_range(dev, 0, "zorder", 0,
|
|
num_planes - 1);
|
|
if (!priv->zorder_prop)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_display_id(struct omap_dss_device *output)
|
|
{
|
|
struct device_node *node = NULL;
|
|
|
|
if (output->bridge) {
|
|
struct drm_bridge *bridge = output->bridge;
|
|
|
|
while (drm_bridge_get_next_bridge(bridge))
|
|
bridge = drm_bridge_get_next_bridge(bridge);
|
|
|
|
node = bridge->of_node;
|
|
}
|
|
|
|
return node ? of_alias_get_id(node, "display") : -ENODEV;
|
|
}
|
|
|
|
static int omap_modeset_init(struct drm_device *dev)
|
|
{
|
|
struct omap_drm_private *priv = dev->dev_private;
|
|
int num_ovls = dispc_get_num_ovls(priv->dispc);
|
|
int num_mgrs = dispc_get_num_mgrs(priv->dispc);
|
|
unsigned int i;
|
|
int ret;
|
|
u32 plane_crtc_mask;
|
|
|
|
if (!omapdss_stack_is_ready())
|
|
return -EPROBE_DEFER;
|
|
|
|
ret = omap_modeset_init_properties(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* This function creates exactly one connector, encoder, crtc,
|
|
* and primary plane per each connected dss-device. Each
|
|
* connector->encoder->crtc chain is expected to be separate
|
|
* and each crtc is connect to a single dss-channel. If the
|
|
* configuration does not match the expectations or exceeds
|
|
* the available resources, the configuration is rejected.
|
|
*/
|
|
ret = omap_connect_pipelines(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (priv->num_pipes > num_mgrs || priv->num_pipes > num_ovls) {
|
|
dev_err(dev->dev, "%s(): Too many connected displays\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Create all planes first. They can all be put to any CRTC. */
|
|
plane_crtc_mask = (1 << priv->num_pipes) - 1;
|
|
|
|
for (i = 0; i < num_ovls; i++) {
|
|
enum drm_plane_type type = i < priv->num_pipes
|
|
? DRM_PLANE_TYPE_PRIMARY
|
|
: DRM_PLANE_TYPE_OVERLAY;
|
|
struct drm_plane *plane;
|
|
|
|
if (WARN_ON(priv->num_planes >= ARRAY_SIZE(priv->planes)))
|
|
return -EINVAL;
|
|
|
|
plane = omap_plane_init(dev, i, type, plane_crtc_mask);
|
|
if (IS_ERR(plane))
|
|
return PTR_ERR(plane);
|
|
|
|
priv->planes[priv->num_planes++] = plane;
|
|
}
|
|
|
|
/*
|
|
* Create the encoders, attach the bridges and get the pipeline alias
|
|
* IDs.
|
|
*/
|
|
for (i = 0; i < priv->num_pipes; i++) {
|
|
struct omap_drm_pipeline *pipe = &priv->pipes[i];
|
|
int id;
|
|
|
|
pipe->encoder = omap_encoder_init(dev, pipe->output);
|
|
if (!pipe->encoder)
|
|
return -ENOMEM;
|
|
|
|
if (pipe->output->bridge) {
|
|
ret = drm_bridge_attach(pipe->encoder,
|
|
pipe->output->bridge, NULL,
|
|
DRM_BRIDGE_ATTACH_NO_CONNECTOR);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
id = omap_display_id(pipe->output);
|
|
pipe->alias_id = id >= 0 ? id : i;
|
|
}
|
|
|
|
/* Sort the pipelines by DT aliases. */
|
|
sort(priv->pipes, priv->num_pipes, sizeof(priv->pipes[0]),
|
|
omap_compare_pipelines, NULL);
|
|
|
|
/*
|
|
* Populate the pipeline lookup table by DISPC channel. Only one display
|
|
* is allowed per channel.
|
|
*/
|
|
for (i = 0; i < priv->num_pipes; ++i) {
|
|
struct omap_drm_pipeline *pipe = &priv->pipes[i];
|
|
enum omap_channel channel = pipe->output->dispc_channel;
|
|
|
|
if (WARN_ON(priv->channels[channel] != NULL))
|
|
return -EINVAL;
|
|
|
|
priv->channels[channel] = pipe;
|
|
}
|
|
|
|
/* Create the connectors and CRTCs. */
|
|
for (i = 0; i < priv->num_pipes; i++) {
|
|
struct omap_drm_pipeline *pipe = &priv->pipes[i];
|
|
struct drm_encoder *encoder = pipe->encoder;
|
|
struct drm_crtc *crtc;
|
|
|
|
pipe->connector = drm_bridge_connector_init(dev, encoder);
|
|
if (IS_ERR(pipe->connector)) {
|
|
dev_err(priv->dev,
|
|
"unable to create bridge connector for %s\n",
|
|
pipe->output->name);
|
|
return PTR_ERR(pipe->connector);
|
|
}
|
|
|
|
drm_connector_attach_encoder(pipe->connector, encoder);
|
|
|
|
crtc = omap_crtc_init(dev, pipe, priv->planes[i]);
|
|
if (IS_ERR(crtc))
|
|
return PTR_ERR(crtc);
|
|
|
|
encoder->possible_crtcs = 1 << i;
|
|
pipe->crtc = crtc;
|
|
}
|
|
|
|
DBG("registered %u planes, %u crtcs/encoders/connectors\n",
|
|
priv->num_planes, priv->num_pipes);
|
|
|
|
dev->mode_config.min_width = 8;
|
|
dev->mode_config.min_height = 2;
|
|
|
|
/*
|
|
* Note: these values are used for multiple independent things:
|
|
* connector mode filtering, buffer sizes, crtc sizes...
|
|
* Use big enough values here to cover all use cases, and do more
|
|
* specific checking in the respective code paths.
|
|
*/
|
|
dev->mode_config.max_width = 8192;
|
|
dev->mode_config.max_height = 8192;
|
|
|
|
/* We want the zpos to be normalized */
|
|
dev->mode_config.normalize_zpos = true;
|
|
|
|
dev->mode_config.funcs = &omap_mode_config_funcs;
|
|
dev->mode_config.helper_private = &omap_mode_config_helper_funcs;
|
|
|
|
drm_mode_config_reset(dev);
|
|
|
|
omap_drm_irq_install(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void omap_modeset_fini(struct drm_device *ddev)
|
|
{
|
|
omap_drm_irq_uninstall(ddev);
|
|
|
|
drm_mode_config_cleanup(ddev);
|
|
}
|
|
|
|
/*
|
|
* Enable the HPD in external components if supported
|
|
*/
|
|
static void omap_modeset_enable_external_hpd(struct drm_device *ddev)
|
|
{
|
|
struct omap_drm_private *priv = ddev->dev_private;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < priv->num_pipes; i++) {
|
|
struct drm_connector *connector = priv->pipes[i].connector;
|
|
|
|
if (!connector)
|
|
continue;
|
|
|
|
if (priv->pipes[i].output->bridge)
|
|
drm_bridge_connector_enable_hpd(connector);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Disable the HPD in external components if supported
|
|
*/
|
|
static void omap_modeset_disable_external_hpd(struct drm_device *ddev)
|
|
{
|
|
struct omap_drm_private *priv = ddev->dev_private;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < priv->num_pipes; i++) {
|
|
struct drm_connector *connector = priv->pipes[i].connector;
|
|
|
|
if (!connector)
|
|
continue;
|
|
|
|
if (priv->pipes[i].output->bridge)
|
|
drm_bridge_connector_disable_hpd(connector);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* drm ioctl funcs
|
|
*/
|
|
|
|
|
|
static int ioctl_get_param(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv)
|
|
{
|
|
struct omap_drm_private *priv = dev->dev_private;
|
|
struct drm_omap_param *args = data;
|
|
|
|
DBG("%p: param=%llu", dev, args->param);
|
|
|
|
switch (args->param) {
|
|
case OMAP_PARAM_CHIPSET_ID:
|
|
args->value = priv->omaprev;
|
|
break;
|
|
default:
|
|
DBG("unknown parameter %lld", args->param);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define OMAP_BO_USER_MASK 0x00ffffff /* flags settable by userspace */
|
|
|
|
static int ioctl_gem_new(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv)
|
|
{
|
|
struct drm_omap_gem_new *args = data;
|
|
u32 flags = args->flags & OMAP_BO_USER_MASK;
|
|
|
|
VERB("%p:%p: size=0x%08x, flags=%08x", dev, file_priv,
|
|
args->size.bytes, flags);
|
|
|
|
return omap_gem_new_handle(dev, file_priv, args->size, flags,
|
|
&args->handle);
|
|
}
|
|
|
|
static int ioctl_gem_info(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv)
|
|
{
|
|
struct drm_omap_gem_info *args = data;
|
|
struct drm_gem_object *obj;
|
|
int ret = 0;
|
|
|
|
VERB("%p:%p: handle=%d", dev, file_priv, args->handle);
|
|
|
|
obj = drm_gem_object_lookup(file_priv, args->handle);
|
|
if (!obj)
|
|
return -ENOENT;
|
|
|
|
args->size = omap_gem_mmap_size(obj);
|
|
args->offset = omap_gem_mmap_offset(obj);
|
|
|
|
drm_gem_object_put(obj);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct drm_ioctl_desc ioctls[DRM_COMMAND_END - DRM_COMMAND_BASE] = {
|
|
DRM_IOCTL_DEF_DRV(OMAP_GET_PARAM, ioctl_get_param,
|
|
DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(OMAP_SET_PARAM, drm_invalid_op,
|
|
DRM_AUTH | DRM_MASTER | DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(OMAP_GEM_NEW, ioctl_gem_new,
|
|
DRM_RENDER_ALLOW),
|
|
/* Deprecated, to be removed. */
|
|
DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_PREP, drm_noop,
|
|
DRM_RENDER_ALLOW),
|
|
/* Deprecated, to be removed. */
|
|
DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_FINI, drm_noop,
|
|
DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(OMAP_GEM_INFO, ioctl_gem_info,
|
|
DRM_RENDER_ALLOW),
|
|
};
|
|
|
|
/*
|
|
* drm driver funcs
|
|
*/
|
|
|
|
static int dev_open(struct drm_device *dev, struct drm_file *file)
|
|
{
|
|
file->driver_priv = NULL;
|
|
|
|
DBG("open: dev=%p, file=%p", dev, file);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct file_operations omapdriver_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = drm_open,
|
|
.unlocked_ioctl = drm_ioctl,
|
|
.compat_ioctl = drm_compat_ioctl,
|
|
.release = drm_release,
|
|
.mmap = omap_gem_mmap,
|
|
.poll = drm_poll,
|
|
.read = drm_read,
|
|
.llseek = noop_llseek,
|
|
};
|
|
|
|
static const struct drm_driver omap_drm_driver = {
|
|
.driver_features = DRIVER_MODESET | DRIVER_GEM |
|
|
DRIVER_ATOMIC | DRIVER_RENDER,
|
|
.open = dev_open,
|
|
.lastclose = drm_fb_helper_lastclose,
|
|
#ifdef CONFIG_DEBUG_FS
|
|
.debugfs_init = omap_debugfs_init,
|
|
#endif
|
|
.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
|
|
.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
|
|
.gem_prime_import = omap_gem_prime_import,
|
|
.dumb_create = omap_gem_dumb_create,
|
|
.dumb_map_offset = omap_gem_dumb_map_offset,
|
|
.ioctls = ioctls,
|
|
.num_ioctls = DRM_OMAP_NUM_IOCTLS,
|
|
.fops = &omapdriver_fops,
|
|
.name = DRIVER_NAME,
|
|
.desc = DRIVER_DESC,
|
|
.date = DRIVER_DATE,
|
|
.major = DRIVER_MAJOR,
|
|
.minor = DRIVER_MINOR,
|
|
.patchlevel = DRIVER_PATCHLEVEL,
|
|
};
|
|
|
|
static const struct soc_device_attribute omapdrm_soc_devices[] = {
|
|
{ .family = "OMAP3", .data = (void *)0x3430 },
|
|
{ .family = "OMAP4", .data = (void *)0x4430 },
|
|
{ .family = "OMAP5", .data = (void *)0x5430 },
|
|
{ .family = "DRA7", .data = (void *)0x0752 },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
|
|
{
|
|
const struct soc_device_attribute *soc;
|
|
struct dss_pdata *pdata = dev->platform_data;
|
|
struct drm_device *ddev;
|
|
int ret;
|
|
|
|
DBG("%s", dev_name(dev));
|
|
|
|
/* Allocate and initialize the DRM device. */
|
|
ddev = drm_dev_alloc(&omap_drm_driver, dev);
|
|
if (IS_ERR(ddev))
|
|
return PTR_ERR(ddev);
|
|
|
|
priv->ddev = ddev;
|
|
ddev->dev_private = priv;
|
|
|
|
priv->dev = dev;
|
|
priv->dss = pdata->dss;
|
|
priv->dispc = dispc_get_dispc(priv->dss);
|
|
|
|
priv->dss->mgr_ops_priv = priv;
|
|
|
|
soc = soc_device_match(omapdrm_soc_devices);
|
|
priv->omaprev = soc ? (uintptr_t)soc->data : 0;
|
|
priv->wq = alloc_ordered_workqueue("omapdrm", 0);
|
|
|
|
mutex_init(&priv->list_lock);
|
|
INIT_LIST_HEAD(&priv->obj_list);
|
|
|
|
/* Get memory bandwidth limits */
|
|
priv->max_bandwidth = dispc_get_memory_bandwidth_limit(priv->dispc);
|
|
|
|
omap_gem_init(ddev);
|
|
|
|
drm_mode_config_init(ddev);
|
|
|
|
ret = omap_global_obj_init(ddev);
|
|
if (ret)
|
|
goto err_gem_deinit;
|
|
|
|
ret = omap_hwoverlays_init(priv);
|
|
if (ret)
|
|
goto err_free_priv_obj;
|
|
|
|
ret = omap_modeset_init(ddev);
|
|
if (ret) {
|
|
dev_err(priv->dev, "omap_modeset_init failed: ret=%d\n", ret);
|
|
goto err_free_overlays;
|
|
}
|
|
|
|
/* Initialize vblank handling, start with all CRTCs disabled. */
|
|
ret = drm_vblank_init(ddev, priv->num_pipes);
|
|
if (ret) {
|
|
dev_err(priv->dev, "could not init vblank\n");
|
|
goto err_cleanup_modeset;
|
|
}
|
|
|
|
omap_fbdev_init(ddev);
|
|
|
|
drm_kms_helper_poll_init(ddev);
|
|
omap_modeset_enable_external_hpd(ddev);
|
|
|
|
/*
|
|
* Register the DRM device with the core and the connectors with
|
|
* sysfs.
|
|
*/
|
|
ret = drm_dev_register(ddev, 0);
|
|
if (ret)
|
|
goto err_cleanup_helpers;
|
|
|
|
return 0;
|
|
|
|
err_cleanup_helpers:
|
|
omap_modeset_disable_external_hpd(ddev);
|
|
drm_kms_helper_poll_fini(ddev);
|
|
|
|
omap_fbdev_fini(ddev);
|
|
err_cleanup_modeset:
|
|
omap_modeset_fini(ddev);
|
|
err_free_overlays:
|
|
omap_hwoverlays_destroy(priv);
|
|
err_free_priv_obj:
|
|
omap_global_obj_fini(priv);
|
|
err_gem_deinit:
|
|
drm_mode_config_cleanup(ddev);
|
|
omap_gem_deinit(ddev);
|
|
destroy_workqueue(priv->wq);
|
|
omap_disconnect_pipelines(ddev);
|
|
drm_dev_put(ddev);
|
|
return ret;
|
|
}
|
|
|
|
static void omapdrm_cleanup(struct omap_drm_private *priv)
|
|
{
|
|
struct drm_device *ddev = priv->ddev;
|
|
|
|
DBG("");
|
|
|
|
drm_dev_unregister(ddev);
|
|
|
|
omap_modeset_disable_external_hpd(ddev);
|
|
drm_kms_helper_poll_fini(ddev);
|
|
|
|
omap_fbdev_fini(ddev);
|
|
|
|
drm_atomic_helper_shutdown(ddev);
|
|
|
|
omap_modeset_fini(ddev);
|
|
omap_hwoverlays_destroy(priv);
|
|
omap_global_obj_fini(priv);
|
|
drm_mode_config_cleanup(ddev);
|
|
omap_gem_deinit(ddev);
|
|
|
|
destroy_workqueue(priv->wq);
|
|
|
|
omap_disconnect_pipelines(ddev);
|
|
|
|
drm_dev_put(ddev);
|
|
}
|
|
|
|
static int pdev_probe(struct platform_device *pdev)
|
|
{
|
|
struct omap_drm_private *priv;
|
|
int ret;
|
|
|
|
ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to set the DMA mask\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Allocate and initialize the driver private structure. */
|
|
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
ret = omapdrm_init(priv, &pdev->dev);
|
|
if (ret < 0)
|
|
kfree(priv);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pdev_remove(struct platform_device *pdev)
|
|
{
|
|
struct omap_drm_private *priv = platform_get_drvdata(pdev);
|
|
|
|
omapdrm_cleanup(priv);
|
|
kfree(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int omap_drm_suspend(struct device *dev)
|
|
{
|
|
struct omap_drm_private *priv = dev_get_drvdata(dev);
|
|
struct drm_device *drm_dev = priv->ddev;
|
|
|
|
return drm_mode_config_helper_suspend(drm_dev);
|
|
}
|
|
|
|
static int omap_drm_resume(struct device *dev)
|
|
{
|
|
struct omap_drm_private *priv = dev_get_drvdata(dev);
|
|
struct drm_device *drm_dev = priv->ddev;
|
|
|
|
drm_mode_config_helper_resume(drm_dev);
|
|
|
|
return omap_gem_resume(drm_dev);
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(omapdrm_pm_ops, omap_drm_suspend, omap_drm_resume);
|
|
|
|
static struct platform_driver pdev = {
|
|
.driver = {
|
|
.name = "omapdrm",
|
|
.pm = &omapdrm_pm_ops,
|
|
},
|
|
.probe = pdev_probe,
|
|
.remove = pdev_remove,
|
|
};
|
|
|
|
static struct platform_driver * const drivers[] = {
|
|
&omap_dmm_driver,
|
|
&pdev,
|
|
};
|
|
|
|
static int __init omap_drm_init(void)
|
|
{
|
|
int r;
|
|
|
|
DBG("init");
|
|
|
|
r = omap_dss_init();
|
|
if (r)
|
|
return r;
|
|
|
|
r = platform_register_drivers(drivers, ARRAY_SIZE(drivers));
|
|
if (r) {
|
|
omap_dss_exit();
|
|
return r;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit omap_drm_fini(void)
|
|
{
|
|
DBG("fini");
|
|
|
|
platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
|
|
|
|
omap_dss_exit();
|
|
}
|
|
|
|
module_init(omap_drm_init);
|
|
module_exit(omap_drm_fini);
|
|
|
|
MODULE_AUTHOR("Rob Clark <rob@ti.com>");
|
|
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
|
|
MODULE_DESCRIPTION("OMAP DRM Display Driver");
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|
|
MODULE_LICENSE("GPL v2");
|