e62fc18213
Just as unevaluatedProperties or additionalProperties are required at the top level of schemas, they should (and will) also be required for child node schemas. That ensures only documented properties are present. Add unevaluatedProperties or additionalProperties as appropriate, and then add any missing properties flagged by the addition. Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Lee Jones <lee@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230124230228.372305-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
129 lines
3.7 KiB
YAML
129 lines
3.7 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/memory-controllers/exynos-srom.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Samsung Exynos SoC SROM Controller driver
|
|
|
|
maintainers:
|
|
- Krzysztof Kozlowski <krzk@kernel.org>
|
|
|
|
description: |+
|
|
The SROM controller can be used to attach external peripherals. In this case
|
|
extra properties, describing the bus behind it, should be specified.
|
|
|
|
properties:
|
|
compatible:
|
|
items:
|
|
- const: samsung,exynos4210-srom
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
"#address-cells":
|
|
const: 2
|
|
|
|
"#size-cells":
|
|
const: 1
|
|
|
|
ranges:
|
|
minItems: 1
|
|
maxItems: 4
|
|
description: |
|
|
Reflects the memory layout with four integer values per bank. Format:
|
|
<bank-number> 0 <parent address of bank> <size>
|
|
Up to four banks are supported.
|
|
|
|
patternProperties:
|
|
"^.*@[0-3],[a-f0-9]+$":
|
|
type: object
|
|
additionalProperties: true
|
|
description:
|
|
The actual device nodes should be added as subnodes to the SROMc node.
|
|
These subnodes, in addition to regular device specification, should
|
|
contain the following properties, describing configuration
|
|
of the relevant SROM bank.
|
|
|
|
properties:
|
|
reg:
|
|
description:
|
|
Bank number, base address (relative to start of the bank) and size
|
|
of the memory mapped for the device. Note that base address will be
|
|
typically 0 as this is the start of the bank.
|
|
maxItems: 1
|
|
|
|
reg-io-width:
|
|
enum: [1, 2]
|
|
description:
|
|
Data width in bytes (1 or 2). If omitted, default of 1 is used.
|
|
|
|
samsung,srom-page-mode:
|
|
description:
|
|
If page mode is set, 4 data page mode will be configured,
|
|
else normal (1 data) page mode will be set.
|
|
type: boolean
|
|
|
|
samsung,srom-timing:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
items:
|
|
minItems: 6
|
|
maxItems: 6
|
|
description: |
|
|
Array of 6 integers, specifying bank timings in the following order:
|
|
Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
|
|
Each value is specified in cycles and has the following meaning
|
|
and valid range:
|
|
Tacp: Page mode access cycle at Page mode (0 - 15)
|
|
Tcah: Address holding time after CSn (0 - 15)
|
|
Tcoh: Chip selection hold on OEn (0 - 15)
|
|
Tacc: Access cycle (0 - 31, the actual time is N + 1)
|
|
Tcos: Chip selection set-up before OEn (0 - 15)
|
|
Tacs: Address set-up before CSn (0 - 15)
|
|
|
|
required:
|
|
- reg
|
|
- samsung,srom-timing
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
// Example: basic definition, no banks are configured
|
|
memory-controller@12560000 {
|
|
compatible = "samsung,exynos4210-srom";
|
|
reg = <0x12560000 0x14>;
|
|
};
|
|
|
|
- |
|
|
// Example: SROMc with SMSC911x ethernet chip on bank 3
|
|
memory-controller@12570000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x04000000 0x20000 // Bank0
|
|
1 0 0x05000000 0x20000 // Bank1
|
|
2 0 0x06000000 0x20000 // Bank2
|
|
3 0 0x07000000 0x20000>; // Bank3
|
|
|
|
compatible = "samsung,exynos4210-srom";
|
|
reg = <0x12570000 0x14>;
|
|
|
|
ethernet@3,0 {
|
|
compatible = "smsc,lan9115";
|
|
reg = <3 0 0x10000>; // Bank 3, offset = 0
|
|
phy-mode = "mii";
|
|
interrupt-parent = <&gpx0>;
|
|
interrupts = <5 8>;
|
|
reg-io-width = <2>;
|
|
smsc,irq-push-pull;
|
|
smsc,force-internal-phy;
|
|
|
|
samsung,srom-page-mode;
|
|
samsung,srom-timing = <9 12 1 9 1 1>;
|
|
};
|
|
};
|