f9a8ee8c8b
Since commit 5e5da1e9fb ("pwm: ab8500: Explicitly allocate pwm chip
base dynamically") all drivers use dynamic ID allocation explicitly. New
drivers are supposed to do the same, so remove support for driver
specified base IDs and drop all assignments in the low-level drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
140 lines
3.2 KiB
C
140 lines
3.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* Author: Arun R Murthy <arun.murthy@stericsson.com>
|
|
*/
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/mfd/abx500.h>
|
|
#include <linux/mfd/abx500/ab8500.h>
|
|
#include <linux/module.h>
|
|
|
|
/*
|
|
* PWM Out generators
|
|
* Bank: 0x10
|
|
*/
|
|
#define AB8500_PWM_OUT_CTRL1_REG 0x60
|
|
#define AB8500_PWM_OUT_CTRL2_REG 0x61
|
|
#define AB8500_PWM_OUT_CTRL7_REG 0x66
|
|
|
|
struct ab8500_pwm_chip {
|
|
struct pwm_chip chip;
|
|
};
|
|
|
|
static int ab8500_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
int ret;
|
|
u8 reg;
|
|
unsigned int higher_val, lower_val;
|
|
|
|
if (state->polarity != PWM_POLARITY_NORMAL)
|
|
return -EINVAL;
|
|
|
|
if (!state->enabled) {
|
|
ret = abx500_mask_and_set_register_interruptible(chip->dev,
|
|
AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
|
|
1 << (chip->base - 1), 0);
|
|
|
|
if (ret < 0)
|
|
dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
|
|
pwm->label, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* get the first 8 bits that are be written to
|
|
* AB8500_PWM_OUT_CTRL1_REG[0:7]
|
|
*/
|
|
lower_val = state->duty_cycle & 0x00FF;
|
|
/*
|
|
* get bits [9:10] that are to be written to
|
|
* AB8500_PWM_OUT_CTRL2_REG[0:1]
|
|
*/
|
|
higher_val = ((state->duty_cycle & 0x0300) >> 8);
|
|
|
|
reg = AB8500_PWM_OUT_CTRL1_REG + ((chip->base - 1) * 2);
|
|
|
|
ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
|
|
reg, (u8)lower_val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
|
|
(reg + 1), (u8)higher_val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = abx500_mask_and_set_register_interruptible(chip->dev,
|
|
AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
|
|
1 << (chip->base - 1), 1 << (chip->base - 1));
|
|
if (ret < 0)
|
|
dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
|
|
pwm->label, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct pwm_ops ab8500_pwm_ops = {
|
|
.apply = ab8500_pwm_apply,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int ab8500_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct ab8500_pwm_chip *ab8500;
|
|
int err;
|
|
|
|
/*
|
|
* Nothing to be done in probe, this is required to get the
|
|
* device which is required for ab8500 read and write
|
|
*/
|
|
ab8500 = devm_kzalloc(&pdev->dev, sizeof(*ab8500), GFP_KERNEL);
|
|
if (ab8500 == NULL)
|
|
return -ENOMEM;
|
|
|
|
ab8500->chip.dev = &pdev->dev;
|
|
ab8500->chip.ops = &ab8500_pwm_ops;
|
|
ab8500->chip.npwm = 1;
|
|
|
|
err = pwmchip_add(&ab8500->chip);
|
|
if (err < 0)
|
|
return dev_err_probe(&pdev->dev, err, "Failed to add pwm chip\n");
|
|
|
|
dev_dbg(&pdev->dev, "pwm probe successful\n");
|
|
platform_set_drvdata(pdev, ab8500);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ab8500_pwm_remove(struct platform_device *pdev)
|
|
{
|
|
struct ab8500_pwm_chip *ab8500 = platform_get_drvdata(pdev);
|
|
int err;
|
|
|
|
err = pwmchip_remove(&ab8500->chip);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
dev_dbg(&pdev->dev, "pwm driver removed\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ab8500_pwm_driver = {
|
|
.driver = {
|
|
.name = "ab8500-pwm",
|
|
},
|
|
.probe = ab8500_pwm_probe,
|
|
.remove = ab8500_pwm_remove,
|
|
};
|
|
module_platform_driver(ab8500_pwm_driver);
|
|
|
|
MODULE_AUTHOR("Arun MURTHY <arun.murthy@stericsson.com>");
|
|
MODULE_DESCRIPTION("AB8500 Pulse Width Modulation Driver");
|
|
MODULE_ALIAS("platform:ab8500-pwm");
|
|
MODULE_LICENSE("GPL v2");
|