linux/drivers/scsi/aic7xxx/aic7xxx_proc.c

/*
 * Copyright (c) 2000-2001 Adaptec Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 *
 * String handling code courtesy of Gerard Roudier's <groudier@club-internet.fr>
 * sym driver.
 *
 * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic7xxx_proc.c#29 $
 */
#include "aic7xxx_osm.h"
#include "aic7xxx_inline.h"
#include "aic7xxx_93cx6.h"

static void	ahc_dump_target_state(struct ahc_softc *ahc,
				      struct seq_file *m,
				      u_int our_id, char channel,
				      u_int target_id, u_int target_offset);
static void	ahc_dump_device_state(struct seq_file *m,
				      struct scsi_device *dev);

/*
 * Table of syncrates that don't follow the "divisible by 4"
 * rule. This table will be expanded in future SCSI specs.
 */
static const struct {
	u_int period_factor;
	u_int period;	/* in 100ths of ns */
} scsi_syncrates[] = {
	{ 0x08, 625 },	/* FAST-160 */
	{ 0x09, 1250 },	/* FAST-80 */
	{ 0x0a, 2500 },	/* FAST-40 40MHz */
	{ 0x0b, 3030 },	/* FAST-40 33MHz */
	{ 0x0c, 5000 }	/* FAST-20 */
};

/*
 * Return the frequency in kHz corresponding to the given
 * sync period factor.
 */
static u_int
ahc_calc_syncsrate(u_int period_factor)
{
	int i;

	/* See if the period is in the "exception" table */
	for (i = 0; i < ARRAY_SIZE(scsi_syncrates); i++) {

		if (period_factor == scsi_syncrates[i].period_factor) {
			/* Period in kHz */
			return (100000000 / scsi_syncrates[i].period);
		}
	}

	/*
	 * Wasn't in the table, so use the standard
	 * 4 times conversion.
	 */
	return (10000000 / (period_factor * 4 * 10));
}

static void
ahc_format_transinfo(struct seq_file *m, struct ahc_transinfo *tinfo)
{
	u_int speed;
	u_int freq;
	u_int mb;

	speed = 3300;
	freq = 0;
	if (tinfo->offset != 0) {
		freq = ahc_calc_syncsrate(tinfo->period);
		speed = freq;
	}
	speed *= (0x01 << tinfo->width);
	mb = speed / 1000;
	if (mb > 0)
		seq_printf(m, "%d.%03dMB/s transfers", mb, speed % 1000);
	else
		seq_printf(m, "%dKB/s transfers", speed);

	if (freq != 0) {
		seq_printf(m, " (%d.%03dMHz%s, offset %d",
			 freq / 1000, freq % 1000,
			 (tinfo->ppr_options & MSG_EXT_PPR_DT_REQ) != 0
			 ? " DT" : "", tinfo->offset);
	}

	if (tinfo->width > 0) {
		if (freq != 0) {
			seq_puts(m, ", ");
		} else {
			seq_puts(m, " (");
		}
		seq_printf(m, "%dbit)", 8 * (0x01 << tinfo->width));
	} else if (freq != 0) {
		seq_putc(m, ')');
	}
	seq_putc(m, '\n');
}

static void
ahc_dump_target_state(struct ahc_softc *ahc, struct seq_file *m,
		      u_int our_id, char channel, u_int target_id,
		      u_int target_offset)
{
	struct	scsi_target *starget;
	struct	ahc_initiator_tinfo *tinfo;
	struct	ahc_tmode_tstate *tstate;
	int	lun;

	tinfo = ahc_fetch_transinfo(ahc, channel, our_id,
				    target_id, &tstate);
	if ((ahc->features & AHC_TWIN) != 0)
		seq_printf(m, "Channel %c ", channel);
	seq_printf(m, "Target %d Negotiation Settings\n", target_id);
	seq_puts(m, "\tUser: ");
	ahc_format_transinfo(m, &tinfo->user);
	starget = ahc->platform_data->starget[target_offset];
	if (!starget)
		return;

	seq_puts(m, "\tGoal: ");
	ahc_format_transinfo(m, &tinfo->goal);
	seq_puts(m, "\tCurr: ");
	ahc_format_transinfo(m, &tinfo->curr);

	for (lun = 0; lun < AHC_NUM_LUNS; lun++) {
		struct scsi_device *sdev;

		sdev = scsi_device_lookup_by_target(starget, lun);

		if (sdev == NULL)
			continue;

		ahc_dump_device_state(m, sdev);
	}
}

static void
ahc_dump_device_state(struct seq_file *m, struct scsi_device *sdev)
{
	struct ahc_linux_device *dev = scsi_transport_device_data(sdev);

	seq_printf(m, "\tChannel %c Target %d Lun %d Settings\n",
		  sdev->sdev_target->channel + 'A',
		   sdev->sdev_target->id, (u8)sdev->lun);

	seq_printf(m, "\t\tCommands Queued %ld\n", dev->commands_issued);
	seq_printf(m, "\t\tCommands Active %d\n", dev->active);
	seq_printf(m, "\t\tCommand Openings %d\n", dev->openings);
	seq_printf(m, "\t\tMax Tagged Openings %d\n", dev->maxtags);
	seq_printf(m, "\t\tDevice Queue Frozen Count %d\n", dev->qfrozen);
}

int
ahc_proc_write_seeprom(struct Scsi_Host *shost, char *buffer, int length)
{
	struct	ahc_softc *ahc = *(struct ahc_softc **)shost->hostdata;
	struct seeprom_descriptor sd;
	int have_seeprom;
	u_long s;
	int paused;
	int written;

	/* Default to failure. */
	written = -EINVAL;
	ahc_lock(ahc, &s);
	paused = ahc_is_paused(ahc);
	if (!paused)
		ahc_pause(ahc);

	if (length != sizeof(struct seeprom_config)) {
		printk("ahc_proc_write_seeprom: incorrect buffer size\n");
		goto done;
	}

	have_seeprom = ahc_verify_cksum((struct seeprom_config*)buffer);
	if (have_seeprom == 0) {
		printk("ahc_proc_write_seeprom: cksum verification failed\n");
		goto done;
	}

	sd.sd_ahc = ahc;
#if AHC_PCI_CONFIG > 0
	if ((ahc->chip & AHC_PCI) != 0) {
		sd.sd_control_offset = SEECTL;
		sd.sd_status_offset = SEECTL;
		sd.sd_dataout_offset = SEECTL;
		if (ahc->flags & AHC_LARGE_SEEPROM)
			sd.sd_chip = C56_66;
		else
			sd.sd_chip = C46;
		sd.sd_MS = SEEMS;
		sd.sd_RDY = SEERDY;
		sd.sd_CS = SEECS;
		sd.sd_CK = SEECK;
		sd.sd_DO = SEEDO;
		sd.sd_DI = SEEDI;
		have_seeprom = ahc_acquire_seeprom(ahc, &sd);
	} else
#endif
	if ((ahc->chip & AHC_VL) != 0) {
		sd.sd_control_offset = SEECTL_2840;
		sd.sd_status_offset = STATUS_2840;
		sd.sd_dataout_offset = STATUS_2840;
		sd.sd_chip = C46;
		sd.sd_MS = 0;
		sd.sd_RDY = EEPROM_TF;
		sd.sd_CS = CS_2840;
		sd.sd_CK = CK_2840;
		sd.sd_DO = DO_2840;
		sd.sd_DI = DI_2840;
		have_seeprom = TRUE;
	} else {
		printk("ahc_proc_write_seeprom: unsupported adapter type\n");
		goto done;
	}

	if (!have_seeprom) {
		printk("ahc_proc_write_seeprom: No Serial EEPROM\n");
		goto done;
	} else {
		u_int start_addr;

		if (ahc->seep_config == NULL) {
			ahc->seep_config = kmalloc(sizeof(*ahc->seep_config),
						   GFP_ATOMIC);
			if (ahc->seep_config == NULL) {
				printk("aic7xxx: Unable to allocate serial "
				       "eeprom buffer.  Write failing\n");
				goto done;
			}
		}
		printk("aic7xxx: Writing Serial EEPROM\n");
		start_addr = 32 * (ahc->channel - 'A');
		ahc_write_seeprom(&sd, (u_int16_t *)buffer, start_addr,
				  sizeof(struct seeprom_config)/2);
		ahc_read_seeprom(&sd, (uint16_t *)ahc->seep_config,
				 start_addr, sizeof(struct seeprom_config)/2);
#if AHC_PCI_CONFIG > 0
		if ((ahc->chip & AHC_VL) == 0)
			ahc_release_seeprom(&sd);
#endif
		written = length;
	}

done:
	if (!paused)
		ahc_unpause(ahc);
	ahc_unlock(ahc, &s);
	return (written);
}

/*
 * Return information to handle /proc support for the driver.
 */
int
ahc_linux_show_info(struct seq_file *m, struct Scsi_Host *shost)
{
	struct	ahc_softc *ahc = *(struct ahc_softc **)shost->hostdata;
	char	ahc_info[256];
	u_int	max_targ;
	u_int	i;

	seq_printf(m, "Adaptec AIC7xxx driver version: %s\n",
		  AIC7XXX_DRIVER_VERSION);
	seq_printf(m, "%s\n", ahc->description);
	ahc_controller_info(ahc, ahc_info);
	seq_printf(m, "%s\n", ahc_info);
	seq_printf(m, "Allocated SCBs: %d, SG List Length: %d\n\n",
		  ahc->scb_data->numscbs, AHC_NSEG);


	if (ahc->seep_config == NULL)
		seq_puts(m, "No Serial EEPROM\n");
	else {
		seq_puts(m, "Serial EEPROM:\n");
		for (i = 0; i < sizeof(*ahc->seep_config)/2; i++) {
			if (((i % 8) == 0) && (i != 0)) {
				seq_putc(m, '\n');
			}
			seq_printf(m, "0x%.4x ",
				  ((uint16_t*)ahc->seep_config)[i]);
		}
		seq_putc(m, '\n');
	}
	seq_putc(m, '\n');

	max_targ = 16;
	if ((ahc->features & (AHC_WIDE|AHC_TWIN)) == 0)
		max_targ = 8;

	for (i = 0; i < max_targ; i++) {
		u_int our_id;
		u_int target_id;
		char channel;

		channel = 'A';
		our_id = ahc->our_id;
		target_id = i;
		if (i > 7 && (ahc->features & AHC_TWIN) != 0) {
			channel = 'B';
			our_id = ahc->our_id_b;
			target_id = i % 8;
		}

		ahc_dump_target_state(ahc, m, our_id,
				      channel, target_id, i);
	}
	return 0;
}