linux/drivers/usb
Hans de Goede 744543c599 usb: musb: sunxi: Add support for the Allwinner sunxi musb controller
This is based on initial code to get the Allwinner sunxi musb controller
supported by Chen-Yu Tsai and Roman Byshko.

This adds support for the Allwinner sunxi musb controller in both host only
and otg mode. Peripheral only mode is not supported, as no boards use that.

This has been tested on a cubietruck (A20 SoC) and an UTOO P66 tablet
(A13 SoC) with a variety of devices in host mode and with the g_serial gadget
driver in peripheral mode, plugging otg / host cables in/out a lot of times
in all possible imaginable plug orders.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-29 09:59:20 -05:00
..
atm Minor merge needed, due to function move. 2015-07-01 10:49:25 -07:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea USB Chipidea update for v4.2-rc1 2015-06-10 18:18:10 -07:00
class cdc-acm: Destroy acm_minors IDR on module exit 2015-07-22 14:49:42 -07:00
common usb: ulpi: ulpi_init should be executed in subsys_initcall 2015-07-20 12:57:46 -05:00
core usb: core: lpm: set lpm_capable for root hub device 2015-07-22 14:46:50 -07:00
dwc2 usb: dwc2: gadget: use | instead of + for bitmasks 2015-07-29 09:59:17 -05:00
dwc3 usb: dwc3: gadget: defer endpoint name change 2015-07-29 09:59:19 -05:00
early
gadget usb: gadget: f_obex: use bind_deactivated flag 2015-07-29 09:59:20 -05:00
host USB: OHCI: fix bad #define in ohci-tmio.c 2015-07-22 14:49:42 -07:00
image scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
isp1760 usb: isp1760: check for null return from kzalloc 2015-06-08 14:25:04 -07:00
misc USB patches for 4.2-rc1 2015-06-26 15:59:26 -07:00
mon USB: mon_stat.c: move assignment out of if () block 2015-05-10 16:01:11 +02:00
musb usb: musb: sunxi: Add support for the Allwinner sunxi musb controller 2015-07-29 09:59:20 -05:00
phy usb: phy: qcom: New APQ8016/MSM8916 USB transceiver driver 2015-07-29 09:59:19 -05:00
renesas_usbhs usb: renesas_usbhs: Replace deprecated API of extcon 2015-07-29 09:59:18 -05:00
serial USB: serial: Destroy serial_minors IDR on module exit 2015-07-09 10:41:23 +02:00
storage usb-storage: Add ignore-device quirk for gm12u320 based usb mini projectors 2015-07-22 14:46:50 -07:00
usbip usbip: vhci_hcd: use USB_DT_HUB 2015-04-03 19:03:15 +02:00
wusbcore wusbcore: rh: use USB_DT_HUB 2015-04-03 19:03:15 +02:00
Kconfig
Makefile usb: load usb phy earlier 2015-03-18 17:25:16 +01:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.