Linus Torvalds 74cae210a3 MTD core changes:
* Dynamic partition support
 * Fix deadlock in sm_ftl
 * Various refcount fixes in maps, partitions and parser code
 * Integer overflow fixes in mtdchar
 * Support for Sercomm partitions
 
 NAND driver changes:
 * Clockrate fix for arasan
 * Add ATO25D1GA support
 * Double free fix for meson driver
 * Fix probe/remove methods in cafe NAND
 * Support unprotected spare data pages in qcom_nandc
 
 SPI NOR core changes:
 * move SECT_4K_PMC flag out of the core as it's a vendor specific flag
 * s/addr_width/addr_nbytes: address width means the number of IO lines
 used for the address, whereas in the code it is used as the number of
 address bytes.
 * do not change nor->addr_nbytes at SFDP parsing time. At the SFDP parsing
 time we should not change members of struct spi_nor, but instead fill
 members of struct spi_nor_flash_parameters which could later on be used
 by the callers.
 * track flash's internal address mode so that we can use 4B opcodes
 together with opcodes that don't have a 4B opcode correspondent.
 
 SPI NOR manufacturer drivers changes:
 * esmt: Rename "f25l32qa" flash name to "f25l32qa-2s".
 * micron-st: Skip FSR reading if SPI controller does not support it to
 allow flashes that support FSR to work even when attached to such SPI
 controllers.
 * spansion: Add s25hl-t/s25hs-t IDs and fixups.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdgfidid8lnn52cLTZvlZhesYu8EFAmLthF4ACgkQZvlZhesY
 u8FCkQ//QNJE67mHMWakQRAgjrJ7S8XAbr3BhWLAo/jKxWq0dp+UmPbR+ioia9bv
 wCgrKhHySdsHfyIsuSe+6oSfs0cqGxOo9o8ldW0fygcgX015/FQu72KEDuIQssl8
 fK2x9IPiwB9a4gwJq8K8DdIrmQtzi4pu3L+xjylrhlJ+7P7pcjGsUSY8kIuW0FI9
 1MD8SawOdtoch8STORnRop9XgPbFMJGx3/Oa7eUm9l6YDbKdtO+b2PJELfReXaHy
 zSTtvG+uP7SOSG7vEVgap76GaXrOklmsiPN62dp+Rk20aqU6DzpGFTdlG8TMMrMc
 x3CG4SyRbtCrb9UhZf5V/LMWMVZrRyuXUxTdNmFCAnTjONXq0UG6HEb4lrOxc7s7
 Az286Ycc2DXCwDrqa50LWAw2nP8JKoRQiMU4Q/9f1UIpIpA7wSrwwtzX/q5LqbEd
 H+q6UOClw92nJZcimLbdyjo9Pauj8Cus76nuasSxSVIC1sWMKg2Y/vOnCgD8SQMj
 ISqO/3A7Dr2xUvKJmM7H3sfyyUWehnYjD/nNc1TOjWzOxAQOlOpMdY8+5I/9Pc0Y
 q9NiCNFiBht14Fc/klWsg8xtNMpPAi7pua1F04meK6Z//9uUbiiN5el/snEQ1uCF
 8o3ILFVpCgHIv2kmjGBBwxzXA9W6V1z/qTundQHJoSRc9DS8VAQ=
 =eBd9
 -----END PGP SIGNATURE-----

Merge tag 'mtd/for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Richard Weinberger:
 "MTD core changes:

   - Dynamic partition support

   - Fix deadlock in sm_ftl

   - Various refcount fixes in maps, partitions and parser code

   - Integer overflow fixes in mtdchar

   - Support for Sercomm partitions

  NAND driver changes:

   - Clockrate fix for arasan

   - Add ATO25D1GA support

   - Double free fix for meson driver

   - Fix probe/remove methods in cafe NAND

   - Support unprotected spare data pages in qcom_nandc

  SPI NOR core changes:

   - move SECT_4K_PMC flag out of the core as it's a vendor specific
     flag

   - s/addr_width/addr_nbytes/g: address width means the number of IO
     lines used for the address, whereas in the code it is used as the
     number of address bytes.

   - do not change nor->addr_nbytes at SFDP parsing time. At the SFDP
     parsing time we should not change members of struct spi_nor, but
     instead fill members of struct spi_nor_flash_parameters which could
     later on be used by the callers.

   - track flash's internal address mode so that we can use 4B opcodes
     together with opcodes that don't have a 4B opcode correspondent.

  SPI NOR manufacturer drivers changes:

   - esmt: Rename "f25l32qa" flash name to "f25l32qa-2s".

   - micron-st: Skip FSR reading if SPI controller does not support it
     to allow flashes that support FSR to work even when attached to
     such SPI controllers.

   - spansion: Add s25hl-t/s25hs-t IDs and fixups"

* tag 'mtd/for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (53 commits)
  mtd: core: check partition before dereference
  mtd: spi-nor: fix spi_nor_spimem_setup_op() call in spi_nor_erase_{sector,chip}()
  mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups
  mtd: spi-nor: spansion: Add local function to discover page size
  mtd: spi-nor: core: Track flash's internal address mode
  mtd: spi-nor: core: Return error code from set_4byte_addr_mode()
  mtd: spi-nor: Do not change nor->addr_nbytes at SFDP parsing time
  mtd: spi-nor: core: Shrink the storage size of the flash_info's addr_nbytes
  mtd: spi-nor: s/addr_width/addr_nbytes
  mtd: spi-nor: esmt: Use correct name of f25l32qa
  mtd: spi-nor: micron-st: Skip FSR reading if SPI controller does not support it
  MAINTAINERS: Use my kernel.org email
  mtd: rawnand: arasan: Fix clock rate in NV-DDR
  mtd: rawnand: arasan: Update NAND bus clock instead of system clock
  mtd: core: introduce of support for dynamic partitions
  dt-bindings: mtd: partitions: add additional example for qcom,smem-part
  dt-bindings: mtd: partitions: support label/name only partition
  mtd: spi-nor: move SECT_4K_PMC special handling
  mtd: dataflash: Add SPI ID table
  mtd: hyperbus: rpc-if: Fix RPM imbalance in probe error path
  ...
2022-08-05 14:13:45 -07:00
2022-08-04 20:00:14 -07:00
2022-08-04 20:00:14 -07:00
2022-08-05 14:13:45 -07:00
2022-08-05 14:13:45 -07:00
2022-08-04 20:19:16 -07:00
2022-08-05 14:13:45 -07:00
2022-08-03 09:45:08 -07:00
2022-08-05 09:41:12 -07:00
2022-08-05 10:07:23 -07:00
2022-08-05 09:41:12 -07:00
2022-08-05 09:41:12 -07:00
2022-08-05 09:54:36 -07:00
2022-08-02 19:34:45 -07:00
2022-08-04 19:30:35 -07:00
2022-07-27 09:43:07 -07:00
2022-08-03 19:52:08 -07:00
2022-08-05 14:13:45 -07:00
2022-08-02 19:44:56 -07:00

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.
Description
No description provided
Readme 5.7 GiB
Languages
C 97.6%
Assembly 1%
Shell 0.5%
Python 0.3%
Makefile 0.3%