The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
274 lines
6.8 KiB
C
274 lines
6.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* DRM driver for Ilitek ILI9486 panels
|
|
*
|
|
* Copyright 2020 Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
|
|
*/
|
|
|
|
#include <linux/backlight.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/property.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_drv.h>
|
|
#include <drm/drm_fb_helper.h>
|
|
#include <drm/drm_gem_atomic_helper.h>
|
|
#include <drm/drm_gem_cma_helper.h>
|
|
#include <drm/drm_managed.h>
|
|
#include <drm/drm_mipi_dbi.h>
|
|
#include <drm/drm_modeset_helper.h>
|
|
|
|
#define ILI9486_ITFCTR1 0xb0
|
|
#define ILI9486_PWCTRL1 0xc2
|
|
#define ILI9486_VMCTRL1 0xc5
|
|
#define ILI9486_PGAMCTRL 0xe0
|
|
#define ILI9486_NGAMCTRL 0xe1
|
|
#define ILI9486_DGAMCTRL 0xe2
|
|
#define ILI9486_MADCTL_BGR BIT(3)
|
|
#define ILI9486_MADCTL_MV BIT(5)
|
|
#define ILI9486_MADCTL_MX BIT(6)
|
|
#define ILI9486_MADCTL_MY BIT(7)
|
|
|
|
/*
|
|
* The PiScreen/waveshare rpi-lcd-35 has a SPI to 16-bit parallel bus converter
|
|
* in front of the display controller. This means that 8-bit values have to be
|
|
* transferred as 16-bit.
|
|
*/
|
|
static int waveshare_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par,
|
|
size_t num)
|
|
{
|
|
struct spi_device *spi = mipi->spi;
|
|
void *data = par;
|
|
u32 speed_hz;
|
|
int i, ret;
|
|
__be16 *buf;
|
|
|
|
buf = kmalloc(32 * sizeof(u16), GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* The displays are Raspberry Pi HATs and connected to the 8-bit only
|
|
* SPI controller, so 16-bit command and parameters need byte swapping
|
|
* before being transferred as 8-bit on the big endian SPI bus.
|
|
* Pixel data bytes have already been swapped before this function is
|
|
* called.
|
|
*/
|
|
buf[0] = cpu_to_be16(*cmd);
|
|
gpiod_set_value_cansleep(mipi->dc, 0);
|
|
speed_hz = mipi_dbi_spi_cmd_max_speed(spi, 2);
|
|
ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, buf, 2);
|
|
if (ret || !num)
|
|
goto free;
|
|
|
|
/* 8-bit configuration data, not 16-bit pixel data */
|
|
if (num <= 32) {
|
|
for (i = 0; i < num; i++)
|
|
buf[i] = cpu_to_be16(par[i]);
|
|
num *= 2;
|
|
speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num);
|
|
data = buf;
|
|
}
|
|
|
|
gpiod_set_value_cansleep(mipi->dc, 1);
|
|
ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, data, num);
|
|
free:
|
|
kfree(buf);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void waveshare_enable(struct drm_simple_display_pipe *pipe,
|
|
struct drm_crtc_state *crtc_state,
|
|
struct drm_plane_state *plane_state)
|
|
{
|
|
struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
|
|
struct mipi_dbi *dbi = &dbidev->dbi;
|
|
u8 addr_mode;
|
|
int ret, idx;
|
|
|
|
if (!drm_dev_enter(pipe->crtc.dev, &idx))
|
|
return;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
ret = mipi_dbi_poweron_conditional_reset(dbidev);
|
|
if (ret < 0)
|
|
goto out_exit;
|
|
if (ret == 1)
|
|
goto out_enable;
|
|
|
|
mipi_dbi_command(dbi, ILI9486_ITFCTR1);
|
|
mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE);
|
|
msleep(250);
|
|
|
|
mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
|
|
|
|
mipi_dbi_command(dbi, ILI9486_PWCTRL1, 0x44);
|
|
|
|
mipi_dbi_command(dbi, ILI9486_VMCTRL1, 0x00, 0x00, 0x00, 0x00);
|
|
|
|
mipi_dbi_command(dbi, ILI9486_PGAMCTRL,
|
|
0x0F, 0x1F, 0x1C, 0x0C, 0x0F, 0x08, 0x48, 0x98,
|
|
0x37, 0x0A, 0x13, 0x04, 0x11, 0x0D, 0x0);
|
|
mipi_dbi_command(dbi, ILI9486_NGAMCTRL,
|
|
0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75,
|
|
0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00);
|
|
mipi_dbi_command(dbi, ILI9486_DGAMCTRL,
|
|
0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75,
|
|
0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00);
|
|
|
|
mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON);
|
|
msleep(100);
|
|
|
|
out_enable:
|
|
switch (dbidev->rotation) {
|
|
case 90:
|
|
addr_mode = ILI9486_MADCTL_MY;
|
|
break;
|
|
case 180:
|
|
addr_mode = ILI9486_MADCTL_MV;
|
|
break;
|
|
case 270:
|
|
addr_mode = ILI9486_MADCTL_MX;
|
|
break;
|
|
default:
|
|
addr_mode = ILI9486_MADCTL_MV | ILI9486_MADCTL_MY |
|
|
ILI9486_MADCTL_MX;
|
|
break;
|
|
}
|
|
addr_mode |= ILI9486_MADCTL_BGR;
|
|
mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
|
|
mipi_dbi_enable_flush(dbidev, crtc_state, plane_state);
|
|
out_exit:
|
|
drm_dev_exit(idx);
|
|
}
|
|
|
|
static const struct drm_simple_display_pipe_funcs waveshare_pipe_funcs = {
|
|
.enable = waveshare_enable,
|
|
.disable = mipi_dbi_pipe_disable,
|
|
.update = mipi_dbi_pipe_update,
|
|
};
|
|
|
|
static const struct drm_display_mode waveshare_mode = {
|
|
DRM_SIMPLE_MODE(480, 320, 73, 49),
|
|
};
|
|
|
|
DEFINE_DRM_GEM_CMA_FOPS(ili9486_fops);
|
|
|
|
static const struct drm_driver ili9486_driver = {
|
|
.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
|
|
.fops = &ili9486_fops,
|
|
DRM_GEM_CMA_DRIVER_OPS_VMAP,
|
|
.debugfs_init = mipi_dbi_debugfs_init,
|
|
.name = "ili9486",
|
|
.desc = "Ilitek ILI9486",
|
|
.date = "20200118",
|
|
.major = 1,
|
|
.minor = 0,
|
|
};
|
|
|
|
static const struct of_device_id ili9486_of_match[] = {
|
|
{ .compatible = "waveshare,rpi-lcd-35" },
|
|
{ .compatible = "ozzmaker,piscreen" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ili9486_of_match);
|
|
|
|
static const struct spi_device_id ili9486_id[] = {
|
|
{ "ili9486", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, ili9486_id);
|
|
|
|
static int ili9486_probe(struct spi_device *spi)
|
|
{
|
|
struct device *dev = &spi->dev;
|
|
struct mipi_dbi_dev *dbidev;
|
|
struct drm_device *drm;
|
|
struct mipi_dbi *dbi;
|
|
struct gpio_desc *dc;
|
|
u32 rotation = 0;
|
|
int ret;
|
|
|
|
dbidev = devm_drm_dev_alloc(dev, &ili9486_driver,
|
|
struct mipi_dbi_dev, drm);
|
|
if (IS_ERR(dbidev))
|
|
return PTR_ERR(dbidev);
|
|
|
|
dbi = &dbidev->dbi;
|
|
drm = &dbidev->drm;
|
|
|
|
dbi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(dbi->reset))
|
|
return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n");
|
|
|
|
dc = devm_gpiod_get(dev, "dc", GPIOD_OUT_LOW);
|
|
if (IS_ERR(dc))
|
|
return dev_err_probe(dev, PTR_ERR(dc), "Failed to get GPIO 'dc'\n");
|
|
|
|
dbidev->backlight = devm_of_find_backlight(dev);
|
|
if (IS_ERR(dbidev->backlight))
|
|
return PTR_ERR(dbidev->backlight);
|
|
|
|
device_property_read_u32(dev, "rotation", &rotation);
|
|
|
|
ret = mipi_dbi_spi_init(spi, dbi, dc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dbi->command = waveshare_command;
|
|
dbi->read_commands = NULL;
|
|
|
|
ret = mipi_dbi_dev_init(dbidev, &waveshare_pipe_funcs,
|
|
&waveshare_mode, rotation);
|
|
if (ret)
|
|
return ret;
|
|
|
|
drm_mode_config_reset(drm);
|
|
|
|
ret = drm_dev_register(drm, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
spi_set_drvdata(spi, drm);
|
|
|
|
drm_fbdev_generic_setup(drm, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ili9486_remove(struct spi_device *spi)
|
|
{
|
|
struct drm_device *drm = spi_get_drvdata(spi);
|
|
|
|
drm_dev_unplug(drm);
|
|
drm_atomic_helper_shutdown(drm);
|
|
}
|
|
|
|
static void ili9486_shutdown(struct spi_device *spi)
|
|
{
|
|
drm_atomic_helper_shutdown(spi_get_drvdata(spi));
|
|
}
|
|
|
|
static struct spi_driver ili9486_spi_driver = {
|
|
.driver = {
|
|
.name = "ili9486",
|
|
.of_match_table = ili9486_of_match,
|
|
},
|
|
.id_table = ili9486_id,
|
|
.probe = ili9486_probe,
|
|
.remove = ili9486_remove,
|
|
.shutdown = ili9486_shutdown,
|
|
};
|
|
module_spi_driver(ili9486_spi_driver);
|
|
|
|
MODULE_DESCRIPTION("Ilitek ILI9486 DRM driver");
|
|
MODULE_AUTHOR("Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>");
|
|
MODULE_LICENSE("GPL");
|