iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
781c4d6f5f
linux/arch/m68k/include/asm/m527xsim.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

367 lines
14 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/****************************************************************************/
/*
* m527xsim.h -- ColdFire 5270/5271 System Integration Module support.
*
* (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
*/
/****************************************************************************/
#ifndef m527xsim_h
#define m527xsim_h
/****************************************************************************/
#define CPU_NAME "COLDFIRE(m527x)"
#define CPU_INSTR_PER_JIFFY 3
#define MCF_BUSCLK (MCF_CLK / 2)
#include <asm/m52xxacr.h>
/*
* Define the 5270/5271 SIM register set addresses.
*/
#define MCFICM_INTC0 (MCF_IPSBAR + 0x0c00) /* Base for Interrupt Ctrl 0 */
#define MCFICM_INTC1 (MCF_IPSBAR + 0x0d00) /* Base for Interrupt Ctrl 1 */
#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
#define MCFINTC_IRLR 0x18 /* */
#define MCFINTC_IACKL 0x19 /* */
#define MCFINTC_ICR0 0x40 /* Base ICR register */
#define MCFINT_VECBASE 64 /* Vector base number */
#define MCFINT_UART0 13 /* Interrupt number for UART0 */
#define MCFINT_UART1 14 /* Interrupt number for UART1 */
#define MCFINT_UART2 15 /* Interrupt number for UART2 */
#define MCFINT_I2C0 17 /* Interrupt number for I2C */
#define MCFINT_QSPI 18 /* Interrupt number for QSPI */
#define MCFINT_FECRX0 23 /* Interrupt number for FEC0 */
#define MCFINT_FECTX0 27 /* Interrupt number for FEC0 */
#define MCFINT_FECENTC0 29 /* Interrupt number for FEC0 */
#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
#define MCFINT2_VECBASE 128 /* Vector base number 2 */
#define MCFINT2_FECRX1 23 /* Interrupt number for FEC1 */
#define MCFINT2_FECTX1 27 /* Interrupt number for FEC1 */
#define MCFINT2_FECENTC1 29 /* Interrupt number for FEC1 */
#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2)
#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0)
#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0)
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_FECRX1 (MCFINT2_VECBASE + MCFINT2_FECRX1)
#define MCF_IRQ_FECTX1 (MCFINT2_VECBASE + MCFINT2_FECTX1)
#define MCF_IRQ_FECENTC1 (MCFINT2_VECBASE + MCFINT2_FECENTC1)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1)
#define MCF_IRQ_I2C0 (MCFINT_VECBASE + MCFINT_I2C0)
/*
* SDRAM configuration registers.
*/
#ifdef CONFIG_M5271
#define MCFSIM_DCR (MCF_IPSBAR + 0x40) /* Control */
#define MCFSIM_DACR0 (MCF_IPSBAR + 0x48) /* Base address 0 */
#define MCFSIM_DMR0 (MCF_IPSBAR + 0x4c) /* Address mask 0 */
#define MCFSIM_DACR1 (MCF_IPSBAR + 0x50) /* Base address 1 */
#define MCFSIM_DMR1 (MCF_IPSBAR + 0x54) /* Address mask 1 */
#endif
#ifdef CONFIG_M5275
#define MCFSIM_DMR (MCF_IPSBAR + 0x40) /* Mode */
#define MCFSIM_DCR (MCF_IPSBAR + 0x44) /* Control */
#define MCFSIM_DCFG1 (MCF_IPSBAR + 0x48) /* Configuration 1 */
#define MCFSIM_DCFG2 (MCF_IPSBAR + 0x4c) /* Configuration 2 */
#define MCFSIM_DBAR0 (MCF_IPSBAR + 0x50) /* Base address 0 */
#define MCFSIM_DMR0 (MCF_IPSBAR + 0x54) /* Address mask 0 */
#define MCFSIM_DBAR1 (MCF_IPSBAR + 0x58) /* Base address 1 */
#define MCFSIM_DMR1 (MCF_IPSBAR + 0x5c) /* Address mask 1 */
#endif
/*
* DMA unit base addresses.
*/
#define MCFDMA_BASE0 (MCF_IPSBAR + 0x100)
#define MCFDMA_BASE1 (MCF_IPSBAR + 0x140)
#define MCFDMA_BASE2 (MCF_IPSBAR + 0x180)
#define MCFDMA_BASE3 (MCF_IPSBAR + 0x1C0)
/*
* UART module.
*/
#define MCFUART_BASE0 (MCF_IPSBAR + 0x200)
#define MCFUART_BASE1 (MCF_IPSBAR + 0x240)
#define MCFUART_BASE2 (MCF_IPSBAR + 0x280)
/*
* FEC ethernet module.
*/
#define MCFFEC_BASE0 (MCF_IPSBAR + 0x1000)
#define MCFFEC_SIZE0 0x800
#ifdef CONFIG_M5275
#define MCFFEC_BASE1 (MCF_IPSBAR + 0x1800)
#define MCFFEC_SIZE1 0x800
#endif
/*
* QSPI module.
*/
#define MCFQSPI_BASE (MCF_IPSBAR + 0x340)
#define MCFQSPI_SIZE 0x40
#ifdef CONFIG_M5271
#define MCFQSPI_CS0 91
#define MCFQSPI_CS1 92
#define MCFQSPI_CS2 99
#define MCFQSPI_CS3 103
#endif
#ifdef CONFIG_M5275
#define MCFQSPI_CS0 59
#define MCFQSPI_CS1 60
#define MCFQSPI_CS2 61
#define MCFQSPI_CS3 62
#endif
/*
* GPIO module.
*/
#ifdef CONFIG_M5271
#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)
#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001)
#define MCFGPIO_PODR_DATAL (MCF_IPSBAR + 0x100002)
#define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100003)
#define MCFGPIO_PODR_BS (MCF_IPSBAR + 0x100004)
#define MCFGPIO_PODR_CS (MCF_IPSBAR + 0x100005)
#define MCFGPIO_PODR_SDRAM (MCF_IPSBAR + 0x100006)
#define MCFGPIO_PODR_FECI2C (MCF_IPSBAR + 0x100007)
#define MCFGPIO_PODR_UARTH (MCF_IPSBAR + 0x100008)
#define MCFGPIO_PODR_UARTL (MCF_IPSBAR + 0x100009)
#define MCFGPIO_PODR_QSPI (MCF_IPSBAR + 0x10000A)
#define MCFGPIO_PODR_TIMER (MCF_IPSBAR + 0x10000B)
#define MCFGPIO_PDDR_ADDR (MCF_IPSBAR + 0x100010)
#define MCFGPIO_PDDR_DATAH (MCF_IPSBAR + 0x100011)
#define MCFGPIO_PDDR_DATAL (MCF_IPSBAR + 0x100012)
#define MCFGPIO_PDDR_BUSCTL (MCF_IPSBAR + 0x100013)
#define MCFGPIO_PDDR_BS (MCF_IPSBAR + 0x100014)
#define MCFGPIO_PDDR_CS (MCF_IPSBAR + 0x100015)
#define MCFGPIO_PDDR_SDRAM (MCF_IPSBAR + 0x100016)
#define MCFGPIO_PDDR_FECI2C (MCF_IPSBAR + 0x100017)
#define MCFGPIO_PDDR_UARTH (MCF_IPSBAR + 0x100018)
#define MCFGPIO_PDDR_UARTL (MCF_IPSBAR + 0x100019)
#define MCFGPIO_PDDR_QSPI (MCF_IPSBAR + 0x10001A)
#define MCFGPIO_PDDR_TIMER (MCF_IPSBAR + 0x10001B)
#define MCFGPIO_PPDSDR_ADDR (MCF_IPSBAR + 0x100020)
#define MCFGPIO_PPDSDR_DATAH (MCF_IPSBAR + 0x100021)
#define MCFGPIO_PPDSDR_DATAL (MCF_IPSBAR + 0x100022)
#define MCFGPIO_PPDSDR_BUSCTL (MCF_IPSBAR + 0x100023)
#define MCFGPIO_PPDSDR_BS (MCF_IPSBAR + 0x100024)
#define MCFGPIO_PPDSDR_CS (MCF_IPSBAR + 0x100025)
#define MCFGPIO_PPDSDR_SDRAM (MCF_IPSBAR + 0x100026)
#define MCFGPIO_PPDSDR_FECI2C (MCF_IPSBAR + 0x100027)
#define MCFGPIO_PPDSDR_UARTH (MCF_IPSBAR + 0x100028)
#define MCFGPIO_PPDSDR_UARTL (MCF_IPSBAR + 0x100029)
#define MCFGPIO_PPDSDR_QSPI (MCF_IPSBAR + 0x10002A)
#define MCFGPIO_PPDSDR_TIMER (MCF_IPSBAR + 0x10002B)
#define MCFGPIO_PCLRR_ADDR (MCF_IPSBAR + 0x100030)
#define MCFGPIO_PCLRR_DATAH (MCF_IPSBAR + 0x100031)
#define MCFGPIO_PCLRR_DATAL (MCF_IPSBAR + 0x100032)
#define MCFGPIO_PCLRR_BUSCTL (MCF_IPSBAR + 0x100033)
#define MCFGPIO_PCLRR_BS (MCF_IPSBAR + 0x100034)
#define MCFGPIO_PCLRR_CS (MCF_IPSBAR + 0x100035)
#define MCFGPIO_PCLRR_SDRAM (MCF_IPSBAR + 0x100036)
#define MCFGPIO_PCLRR_FECI2C (MCF_IPSBAR + 0x100037)
#define MCFGPIO_PCLRR_UARTH (MCF_IPSBAR + 0x100038)
#define MCFGPIO_PCLRR_UARTL (MCF_IPSBAR + 0x100039)
#define MCFGPIO_PCLRR_QSPI (MCF_IPSBAR + 0x10003A)
#define MCFGPIO_PCLRR_TIMER (MCF_IPSBAR + 0x10003B)
/*
* Generic GPIO support
*/
#define MCFGPIO_PODR MCFGPIO_PODR_ADDR
#define MCFGPIO_PDDR MCFGPIO_PDDR_ADDR
#define MCFGPIO_PPDR MCFGPIO_PPDSDR_ADDR
#define MCFGPIO_SETR MCFGPIO_PPDSDR_ADDR
#define MCFGPIO_CLRR MCFGPIO_PCLRR_ADDR
#define MCFGPIO_PIN_MAX 100
#define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
/*
* Port Pin Assignment registers.
*/
#define MCFGPIO_PAR_AD (MCF_IPSBAR + 0x100040)
#define MCFGPIO_PAR_BUSCTL (MCF_IPSBAR + 0x100042)
#define MCFGPIO_PAR_BS (MCF_IPSBAR + 0x100044)
#define MCFGPIO_PAR_CS (MCF_IPSBAR + 0x100045)
#define MCFGPIO_PAR_SDRAM (MCF_IPSBAR + 0x100046)
#define MCFGPIO_PAR_FECI2C (MCF_IPSBAR + 0x100047)
#define MCFGPIO_PAR_UART (MCF_IPSBAR + 0x100048)
#define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10004A)
#define MCFGPIO_PAR_TIMER (MCF_IPSBAR + 0x10004C)
#define UART0_ENABLE_MASK 0x000f
#define UART1_ENABLE_MASK 0x0ff0
#define UART2_ENABLE_MASK 0x3000
#endif /* CONFIG_M5271 */
#ifdef CONFIG_M5275
#define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100004)
#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100005)
#define MCFGPIO_PODR_CS (MCF_IPSBAR + 0x100008)
#define MCFGPIO_PODR_FEC0H (MCF_IPSBAR + 0x10000A)
#define MCFGPIO_PODR_FEC0L (MCF_IPSBAR + 0x10000B)
#define MCFGPIO_PODR_FECI2C (MCF_IPSBAR + 0x10000C)
#define MCFGPIO_PODR_QSPI (MCF_IPSBAR + 0x10000D)
#define MCFGPIO_PODR_SDRAM (MCF_IPSBAR + 0x10000E)
#define MCFGPIO_PODR_TIMERH (MCF_IPSBAR + 0x10000F)
#define MCFGPIO_PODR_TIMERL (MCF_IPSBAR + 0x100010)
#define MCFGPIO_PODR_UARTL (MCF_IPSBAR + 0x100011)
#define MCFGPIO_PODR_FEC1H (MCF_IPSBAR + 0x100012)
#define MCFGPIO_PODR_FEC1L (MCF_IPSBAR + 0x100013)
#define MCFGPIO_PODR_BS (MCF_IPSBAR + 0x100014)
#define MCFGPIO_PODR_IRQ (MCF_IPSBAR + 0x100015)
#define MCFGPIO_PODR_USBH (MCF_IPSBAR + 0x100016)
#define MCFGPIO_PODR_USBL (MCF_IPSBAR + 0x100017)
#define MCFGPIO_PODR_UARTH (MCF_IPSBAR + 0x100018)
#define MCFGPIO_PDDR_BUSCTL (MCF_IPSBAR + 0x100020)
#define MCFGPIO_PDDR_ADDR (MCF_IPSBAR + 0x100021)
#define MCFGPIO_PDDR_CS (MCF_IPSBAR + 0x100024)
#define MCFGPIO_PDDR_FEC0H (MCF_IPSBAR + 0x100026)
#define MCFGPIO_PDDR_FEC0L (MCF_IPSBAR + 0x100027)
#define MCFGPIO_PDDR_FECI2C (MCF_IPSBAR + 0x100028)
#define MCFGPIO_PDDR_QSPI (MCF_IPSBAR + 0x100029)
#define MCFGPIO_PDDR_SDRAM (MCF_IPSBAR + 0x10002A)
#define MCFGPIO_PDDR_TIMERH (MCF_IPSBAR + 0x10002B)
#define MCFGPIO_PDDR_TIMERL (MCF_IPSBAR + 0x10002C)
#define MCFGPIO_PDDR_UARTL (MCF_IPSBAR + 0x10002D)
#define MCFGPIO_PDDR_FEC1H (MCF_IPSBAR + 0x10002E)
#define MCFGPIO_PDDR_FEC1L (MCF_IPSBAR + 0x10002F)
#define MCFGPIO_PDDR_BS (MCF_IPSBAR + 0x100030)
#define MCFGPIO_PDDR_IRQ (MCF_IPSBAR + 0x100031)
#define MCFGPIO_PDDR_USBH (MCF_IPSBAR + 0x100032)
#define MCFGPIO_PDDR_USBL (MCF_IPSBAR + 0x100033)
#define MCFGPIO_PDDR_UARTH (MCF_IPSBAR + 0x100034)
#define MCFGPIO_PPDSDR_BUSCTL (MCF_IPSBAR + 0x10003C)
#define MCFGPIO_PPDSDR_ADDR (MCF_IPSBAR + 0x10003D)
#define MCFGPIO_PPDSDR_CS (MCF_IPSBAR + 0x100040)
#define MCFGPIO_PPDSDR_FEC0H (MCF_IPSBAR + 0x100042)
#define MCFGPIO_PPDSDR_FEC0L (MCF_IPSBAR + 0x100043)
#define MCFGPIO_PPDSDR_FECI2C (MCF_IPSBAR + 0x100044)
#define MCFGPIO_PPDSDR_QSPI (MCF_IPSBAR + 0x100045)
#define MCFGPIO_PPDSDR_SDRAM (MCF_IPSBAR + 0x100046)
#define MCFGPIO_PPDSDR_TIMERH (MCF_IPSBAR + 0x100047)
#define MCFGPIO_PPDSDR_TIMERL (MCF_IPSBAR + 0x100048)
#define MCFGPIO_PPDSDR_UARTL (MCF_IPSBAR + 0x100049)
#define MCFGPIO_PPDSDR_FEC1H (MCF_IPSBAR + 0x10004A)
#define MCFGPIO_PPDSDR_FEC1L (MCF_IPSBAR + 0x10004B)
#define MCFGPIO_PPDSDR_BS (MCF_IPSBAR + 0x10004C)
#define MCFGPIO_PPDSDR_IRQ (MCF_IPSBAR + 0x10004D)
#define MCFGPIO_PPDSDR_USBH (MCF_IPSBAR + 0x10004E)
#define MCFGPIO_PPDSDR_USBL (MCF_IPSBAR + 0x10004F)
#define MCFGPIO_PPDSDR_UARTH (MCF_IPSBAR + 0x100050)
#define MCFGPIO_PCLRR_BUSCTL (MCF_IPSBAR + 0x100058)
#define MCFGPIO_PCLRR_ADDR (MCF_IPSBAR + 0x100059)
#define MCFGPIO_PCLRR_CS (MCF_IPSBAR + 0x10005C)
#define MCFGPIO_PCLRR_FEC0H (MCF_IPSBAR + 0x10005E)
#define MCFGPIO_PCLRR_FEC0L (MCF_IPSBAR + 0x10005F)
#define MCFGPIO_PCLRR_FECI2C (MCF_IPSBAR + 0x100060)
#define MCFGPIO_PCLRR_QSPI (MCF_IPSBAR + 0x100061)
#define MCFGPIO_PCLRR_SDRAM (MCF_IPSBAR + 0x100062)
#define MCFGPIO_PCLRR_TIMERH (MCF_IPSBAR + 0x100063)
#define MCFGPIO_PCLRR_TIMERL (MCF_IPSBAR + 0x100064)
#define MCFGPIO_PCLRR_UARTL (MCF_IPSBAR + 0x100065)
#define MCFGPIO_PCLRR_FEC1H (MCF_IPSBAR + 0x100066)
#define MCFGPIO_PCLRR_FEC1L (MCF_IPSBAR + 0x100067)
#define MCFGPIO_PCLRR_BS (MCF_IPSBAR + 0x100068)
#define MCFGPIO_PCLRR_IRQ (MCF_IPSBAR + 0x100069)
#define MCFGPIO_PCLRR_USBH (MCF_IPSBAR + 0x10006A)
#define MCFGPIO_PCLRR_USBL (MCF_IPSBAR + 0x10006B)
#define MCFGPIO_PCLRR_UARTH (MCF_IPSBAR + 0x10006C)
/*
* Generic GPIO support
*/
#define MCFGPIO_PODR MCFGPIO_PODR_BUSCTL
#define MCFGPIO_PDDR MCFGPIO_PDDR_BUSCTL
#define MCFGPIO_PPDR MCFGPIO_PPDSDR_BUSCTL
#define MCFGPIO_SETR MCFGPIO_PPDSDR_BUSCTL
#define MCFGPIO_CLRR MCFGPIO_PCLRR_BUSCTL
#define MCFGPIO_PIN_MAX 148
#define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
/*
* Port Pin Assignment registers.
*/
#define MCFGPIO_PAR_AD (MCF_IPSBAR + 0x100070)
#define MCFGPIO_PAR_CS (MCF_IPSBAR + 0x100071)
#define MCFGPIO_PAR_BUSCTL (MCF_IPSBAR + 0x100072)
#define MCFGPIO_PAR_USB (MCF_IPSBAR + 0x100076)
#define MCFGPIO_PAR_FEC0HL (MCF_IPSBAR + 0x100078)
#define MCFGPIO_PAR_FEC1HL (MCF_IPSBAR + 0x100079)
#define MCFGPIO_PAR_TIMER (MCF_IPSBAR + 0x10007A)
#define MCFGPIO_PAR_UART (MCF_IPSBAR + 0x10007C)
#define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10007E)
#define MCFGPIO_PAR_SDRAM (MCF_IPSBAR + 0x100080)
#define MCFGPIO_PAR_FECI2C (MCF_IPSBAR + 0x100082)
#define MCFGPIO_PAR_BS (MCF_IPSBAR + 0x100084)
#define UART0_ENABLE_MASK 0x000f
#define UART1_ENABLE_MASK 0x00f0
#define UART2_ENABLE_MASK 0x3f00
#endif /* CONFIG_M5275 */
/*
* PIT timer base addresses.
*/
#define MCFPIT_BASE1 (MCF_IPSBAR + 0x150000)
#define MCFPIT_BASE2 (MCF_IPSBAR + 0x160000)
#define MCFPIT_BASE3 (MCF_IPSBAR + 0x170000)
#define MCFPIT_BASE4 (MCF_IPSBAR + 0x180000)
/*
* EPort
*/
#define MCFEPORT_EPPAR (MCF_IPSBAR + 0x130000)
#define MCFEPORT_EPDDR (MCF_IPSBAR + 0x130002)
#define MCFEPORT_EPIER (MCF_IPSBAR + 0x130003)
#define MCFEPORT_EPDR (MCF_IPSBAR + 0x130004)
#define MCFEPORT_EPPDR (MCF_IPSBAR + 0x130005)
#define MCFEPORT_EPFR (MCF_IPSBAR + 0x130006)
/*
* Reset Control Unit (relative to IPSBAR).
*/
#define MCF_RCR (MCF_IPSBAR + 0x110000)
#define MCF_RSR (MCF_IPSBAR + 0x110001)
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
/*
* I2C module.
*/
#define MCFI2C_BASE0 (MCF_IPSBAR + 0x300)
#define MCFI2C_SIZE0 0x40
/****************************************************************************/
#endif /* m527xsim_h */
Reference in New Issue View Git Blame Copy Permalink