Tony Battersby 783fa7311b [SCSI] sym53c8xx: handle pci_iomap() failures
sym_init_device() doesn't check if pci_iomap() fails.  It also tries
to map device RAM without first checking FE_RAM.

1) Move some initialization from sym_init_device() to the top of
   sym2_probe().
2) Rename sym_init_device() to sym_iomap_device().
3) Call sym_iomap_device() after sym_check_supported() instead of
   before so that device->chip.features will be set.
4) Check FE_RAM in sym_iomap_device() before mapping RAM.
5) If sym_iomap_device() cannot map registers, then abort.
6) If sym_iomap_device() cannot map RAM, then fall back to not using
   RAM and continue.
7) Remove the check for FE_RAM in sym_attach() since dev->ram_base
   is now always set correctly.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12 12:58:16 -05:00
..
2009-03-12 12:58:02 -05:00
2008-01-11 18:22:30 -06:00
2006-09-12 17:12:31 -05:00
2006-09-12 17:12:31 -05:00
2008-10-16 16:52:06 +02:00
2009-03-12 12:58:02 -05:00
2008-12-29 11:24:14 -06:00
2008-08-29 02:13:10 -07:00
2008-11-30 10:03:36 -08:00
2008-10-09 08:56:13 +02:00
2006-09-12 17:12:31 -05:00
2009-03-12 12:58:02 -05:00
2009-03-12 12:57:58 -05:00
2009-03-12 12:58:02 -05:00
2008-01-30 13:14:02 -06:00
2008-12-28 20:00:03 +01:00
2006-09-12 17:12:31 -05:00
2008-01-30 13:14:02 -06:00
2008-01-30 13:14:02 -06:00
2009-03-12 12:58:10 -05:00
2009-03-12 12:58:10 -05:00
2008-10-23 11:42:17 -05:00
2009-03-12 12:58:05 -05:00
2007-07-18 11:16:32 -05:00
2008-07-02 15:06:25 -06:00
2009-03-12 12:57:54 -05:00
2008-02-07 18:02:44 -06:00
2009-03-12 12:58:02 -05:00
2009-01-02 12:02:25 -06:00
2009-03-12 12:58:04 -05:00
2008-10-23 11:42:19 -05:00
2006-11-15 16:43:50 -06:00
2007-10-19 23:22:55 +02:00