linux

iv/linux

History

Shengzhou Liu 78eb9094ca powerpc/t2080rdb: Add T2080RDB board support

T2080PCIe-RDB is a Freescale Reference Design Board that hosts T2080 SoC.
The board feature overview:
Processor:
 - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
DDR Memory:
 - Single memory controller capable of supporting DDR3 and DDR3-LP devices
 - 72bit 4GB DDR3-LP SODIMM in slot
Ethernet interfaces:
 - Two 1Gbps RGMII ports on-board
 - Two 10Gbps SFP+ ports on-board
 - Two 10Gbps Base-T ports on-board
Accelerator:
 - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
IFC/Local Bus
 - NOR:  128MB 16-bit NOR flash
 - NAND: 1GB 8-bit NAND flash
 - CPLD: for system controlling with programable header on-board
eSPI:
 - 64MB N25Q512 SPI flash
USB:
 - Two USB2.0 ports with internal PHY (both Type-A)
PCIe:
 - One PCIe x4 goldfinger(support SR-IOV)
 - One PCIe x4 slot
 - One PCIe x2 end-point device (C293 crypto co-processor)
SATA:
 - Two SATA 2.0 ports on-board
SDHC:
 - support a MicroSD/TF card on-board
I2C:
 - Four I2C controllers.
UART:
 - Dual 4-pins UART serial ports

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

2014-07-31 00:11:10 -05:00

dts

powerpc/t2080rdb: Add T2080RDB board support

2014-07-31 00:11:10 -05:00

.gitignore

powerpc/boot: Ignore .dtb files.

2013-12-02 14:06:57 +11:00

4xx.c

powerpc/44x: Fix UART clocks on 440SPe

2010-05-12 07:48:49 -04:00

4xx.h

powerpc/405ex: provide necessary fixup function to support cuImage

2009-08-31 09:20:55 -04:00

44x.h

[POWERPC] cuimage for Bamboo board

2007-09-19 21:13:16 -05:00

addnote.c

powerpc/boot: Add 64bit and little endian support to addnote

2014-04-28 17:36:00 +10:00

bamboo.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

cpm-serial.c

[POWERPC] cpm-serial: Relocate CPM buffer descriptors and SMC parameter ram.

2008-04-17 01:01:37 -05:00

crt0.S

powerpc/boot: Add support for 64bit little endian wrapper

2014-04-28 17:36:21 +10:00

crtsavres.S

[POWERPC] Fix bootwrapper builds with newer gcc versions

2008-06-16 15:00:52 +10:00

cuboot-8xx.c

[POWERPC] Use embedded libfdt in the bootwrapper

2007-12-11 13:46:14 +11:00

cuboot-52xx.c

powerpc/52xx: Make cuImage more robust in locating immr node.

2008-10-15 11:09:59 -06:00

cuboot-83xx.c

[POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_alias

2008-01-23 19:32:47 -06:00

cuboot-85xx-cpm2.c

[POWERPC] Add a cuboot wrapper for 85xx with CPM2

2008-01-27 14:10:36 -06:00

cuboot-85xx.c

powerpc/85xx: cuboot - Fix up ethernet3 MAC address on MPC85xx

2009-06-15 21:45:32 -05:00

cuboot-824x.c

[POWERPC] Add initial iomega StorCenter board port.

2008-01-23 19:54:36 -06:00

cuboot-acadia.c

powerpc/40x: Add cuboot wrapper for Acadia board

2008-10-17 10:31:19 -04:00

cuboot-amigaone.c

powerpc/amigaone: Bootwrapper and serial console support for AmigaOne

2009-02-11 16:00:09 +11:00

cuboot-bamboo.c

[POWERPC] 4xx: Use correct board info structure in cuboot wrappers

2008-02-28 08:16:27 -06:00

cuboot-c2k.c

powerpc: Boot code for the C2K

2008-06-09 13:42:25 +10:00

cuboot-ebony.c

[POWERPC] 4xx: Use correct board info structure in cuboot wrappers

2008-02-28 08:16:27 -06:00

cuboot-hotfoot.c

powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC

2009-08-31 09:15:51 -04:00

cuboot-katmai.c

[POWERPC] 4xx: Use correct board info structure in cuboot wrappers

2008-02-28 08:16:27 -06:00

cuboot-kilauea.c

powerpc/405ex: support cuImage via included dtb

2009-08-31 09:23:22 -04:00

cuboot-mpc7448hpc2.c

[POWERPC] bootwrapper: Build multiple cuImages

2008-02-07 11:40:19 +11:00

cuboot-pq2.c

[POWERPC] cuboot-pq2: PCI fixes

2008-04-17 01:01:40 -05:00

cuboot-rainier.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

cuboot-sam440ep.c

powerpc/4xx: Sam440ep support

2008-06-11 08:32:49 -04:00

cuboot-sequoia.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

cuboot-taishan.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

cuboot-warp.c

powerpc/44x: Warp patches for the new NDFC driver

2009-01-20 08:17:21 -05:00

cuboot-yosemite.c

[POWERPC] 4xx: Add bootwrapper for AMCC Yosemite board

2008-03-26 07:19:17 -05:00

cuboot.c

[POWERPC] bootwrapper: Move linker symbols into ops.h

2007-08-22 15:27:28 +10:00

cuboot.h

[POWERPC] Consolidate cuboot initialization code

2007-06-14 22:30:16 +10:00

dcr.h

IBM Akebono: Add the Akebono platform

2014-05-01 08:26:26 +10:00

devtree.c

powerpc/bootwrapper: Use the child-bus #address-cells to decide which range entry to use

2008-12-21 14:21:17 +11:00

div64.S

powerpc/boot: Add extended precision shifts to the boot wrapper.

2011-12-09 07:49:27 -05:00

dummy.c

…

ebony.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

elf_util.c

powerpc/boot: Add little endian support to elf utils

2014-04-28 17:36:04 +10:00

elf.h

…

ep88xc.c

[POWERPC] Use embedded libfdt in the bootwrapper

2007-12-11 13:46:14 +11:00

ep405.c

[POWERPC] 4xx: EP405 boards support for arch/powerpc

2007-12-23 13:13:14 -06:00

ep8248e.c

[POWERPC] 82xx: Embedded Planet EP8248E support

2008-01-23 19:34:43 -06:00

epapr-wrapper.c

powerpc/zImage: make the "OF" wrapper support ePAPR boot

2013-09-25 14:18:44 +10:00

epapr.c

powerpc/zImage: make the "OF" wrapper support ePAPR boot

2013-09-25 14:18:44 +10:00

fixed-head.S

[POWERPC] 8xx/wrapper: Embedded Planet EP88xC support

2007-10-04 11:02:40 -05:00

fsl-soc.c

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

fsl-soc.h

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

gamecube-head.S

powerpc: gamecube: bootwrapper bits

2009-12-12 22:24:26 -07:00

gamecube.c

powerpc: gamecube: bootwrapper bits

2009-12-12 22:24:26 -07:00

gunzip_util.c

[POWERPC] boot: Simplify gunzip_finish

2007-10-03 11:48:43 +10:00

gunzip_util.h

…

hack-coff.c

…

holly.c

[POWERPC] Use embedded libfdt in the bootwrapper

2007-12-11 13:46:14 +11:00

install.sh

kbuild: use INSTALLKERNEL to select customized installkernel script

2009-09-20 12:18:14 +02:00

io.h

powerpc: Move include files to arch/powerpc/include/asm

2008-08-04 12:02:00 +10:00

libfdt_env.h

powerpc: Update in-kernel dtc and libfdt to version 1.2.0

2008-08-20 16:34:58 +10:00

libfdt-wrapper.c

powerpc/boot: Allocate more memory for dtb

2008-11-06 09:49:43 +11:00

main.c

powerpc: Rename duplicate COMMAND_LINE_SIZE define

2014-04-28 16:31:54 +10:00

Makefile

Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild

2014-06-12 21:23:38 -07:00

mktree.c

powerpc: use consistent types in mktree

2009-08-20 10:29:30 +10:00

mpc8xx.c

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

mpc8xx.h

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

mpc52xx-psc.c

[POWERPC] Add bootwrapper function to get virtual reg from the device tree.

2008-04-17 01:01:37 -05:00

mpsc.c

[POWERPC] prpmc2800: Clean up dts properties

2008-04-15 21:21:24 +10:00

mv64x60_i2c.c

[POWERPC] mv64x60: Remove device tree absolute path references

2008-04-15 21:21:24 +10:00

mv64x60.c

[POWERPC] mv64x60: Remove device tree absolute path references

2008-04-15 21:21:24 +10:00

mv64x60.h

[POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge

2007-05-12 11:32:49 +10:00

mvme5100.c

powerpc/embedded6xx: Add support for Motorola/Emerson MVME5100

2014-01-09 17:52:20 -06:00

ns16550.c

[POWERPC] Xilinx: boot support for Xilinx uart 16550.

2008-04-24 13:32:46 -05:00

of.c

powerpc/boot: Rework of_claim() to make it 64bit friendly

2014-04-28 17:35:43 +10:00

of.h

powerpc/boot: Define byteswapping routines for little endian

2014-04-28 17:35:56 +10:00

ofconsole.c

powerpc/boot: Add byteswapping routines in oflib

2014-04-28 17:35:35 +10:00

oflib.c

powerpc/boot: Define a routine to enter prom

2014-04-28 17:36:08 +10:00

ops.h

powerpc: Bump BOOT_COMMAND_LINE_SIZE to 2048

2014-04-28 16:32:02 +10:00

page.h

…

planetcore.c

[POWERPC] bootwrapper: Add PlanetCore firmware support

2007-10-03 11:48:43 +10:00

planetcore.h

[POWERPC] bootwrapper: Add PlanetCore firmware support

2007-10-03 11:48:43 +10:00

ppc_asm.h

powerpc/boot: Add support for 64bit little endian wrapper

2014-04-28 17:36:21 +10:00

ppcboot-hotfoot.h

powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC

2009-08-31 09:15:51 -04:00

ppcboot.h

[POWERPC] bootwrapper: Add TARGET_HAS_ETHn tests to ppcboot.h

2007-08-22 15:21:48 +10:00

pq2.c

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

pq2.h

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

prpmc2800.c

[POWERPC] mv64x60: Remove device tree absolute path references

2008-04-15 21:21:24 +10:00

ps3-head.S

[POWERPC] PS3: Bootwrapper improvements

2008-04-01 20:43:07 +11:00

ps3-hvcall.S

[POWERPC] PS3: Fix bootwrapper hang bug

2008-02-14 22:11:01 +11:00

ps3.c

powerpc: Rename duplicate COMMAND_LINE_SIZE define

2014-04-28 16:31:54 +10:00

pseries-head.S

powerpc/boot: Add support for 64bit little endian wrapper

2014-04-28 17:36:21 +10:00

README

…

redboot-8xx.c

[POWERPC] 8xx: Analogue & Micro Adder875 board support.

2008-01-23 19:34:40 -06:00

redboot-83xx.c

[POWERPC] 83xx: Add support for Analogue & Micro ASP837E board

2008-06-02 14:44:25 -05:00

redboot.h

[POWERPC] 8xx: Analogue & Micro Adder875 board support.

2008-01-23 19:34:40 -06:00

reg.h

[POWERPC] 4xx: Add mfspr/mtspr inline macros to 4xx bootwrapper

2007-12-23 13:14:22 -06:00

rs6000.h

…

serial.c

powerpc/amigaone: Bootwrapper and serial console support for AmigaOne

2009-02-11 16:00:09 +11:00

simple_alloc.c

…

simpleboot.c

Move dtc and libfdt sources from arch/powerpc/boot to scripts/dtc

2009-05-02 16:52:26 -07:00

stdio.c

powerpc/boot: Fix do_div for 64bit wrapper

2014-04-28 17:35:22 +10:00

stdio.h

…

stdlib.c

[POWERPC] bootwrapper: Add strtoull()

2007-09-14 01:33:23 +10:00

stdlib.h

[POWERPC] bootwrapper: Add strtoull()

2007-09-14 01:33:23 +10:00

string.h

[POWERPC] Add memchr() to the bootwrapper

2007-10-12 14:13:44 +10:00

string.S

powerpc: Fix boot wrapper memcmp() called with zero length argument

2008-10-21 15:17:48 +11:00

swab.h

powerpc/boot: Define byteswapping routines for little endian

2014-04-28 17:35:56 +10:00

treeboot-akebono.c

powerpc: Added PCI MSI support using the HSTA module

2014-05-01 08:26:30 +10:00

treeboot-bamboo.c

[POWERPC] cuimage for Bamboo board

2007-09-19 21:13:16 -05:00

treeboot-currituck.c

powerpc/47x: Add support for the new IBM currituck platform

2011-12-09 07:51:40 -05:00

treeboot-ebony.c

[POWERPC] bootwrapper: Move linker symbols into ops.h

2007-08-22 15:27:28 +10:00

treeboot-iss4xx.c

powerpc/44x: boot wrapper: allow kernel to load into non-zero address

2011-07-12 09:34:41 -04:00

treeboot-walnut.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

types.h

[POWERPC] Add signed types to bootwrapper

2007-06-28 19:16:47 +10:00

uartlite.c

[POWERPC] Uartlite: bootwrapper bug fix, getc loops forever

2007-10-10 09:14:35 -06:00

ugecon.c

powerpc/gamecube/wii: Fix off-by-one error in ugecon/usbgecko_udbg

2009-12-18 15:13:57 +11:00

ugecon.h

powerpc: gamecube/wii: usbgecko bootwrapper console support

2009-12-12 22:24:26 -07:00

util.S

powerpc: No need to use dot symbols when branching to a function

2014-04-23 10:05:16 +10:00

virtex405-head.S

[POWERPC] bootwrapper: Add a firmware-independent simpleboot target.

2008-04-02 20:36:11 -05:00

virtex.c

powerpc/virtex: Fix booting of Xilinx FPGAs with 16550 for 405 and 440

2008-07-04 00:58:59 -06:00

wii-head.S

powerpc: wii: bootwrapper bits

2009-12-12 22:24:29 -07:00

wii.c

wii: bootwrapper: add fixup to calc useable mem2

2009-12-12 22:24:31 -07:00

wrapper

IBM Akebono: Add the Akebono platform

2014-05-01 08:26:26 +10:00

zImage.coff.lds.S

powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN

2011-04-20 16:59:20 +10:00

zImage.lds.S

powerpc/boot: Add support for 64bit little endian wrapper

2014-04-28 17:36:21 +10:00

zImage.ps3.lds.S

[POWERPC] PS3: Bootwrapper support.

2007-07-10 21:56:40 +10:00

README

To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary:

objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz
objcopy -j .kernel:System.map -O binary zImage System.map.gz
objcopy -j .kernel:.config -O binary zImage config.gz
objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz


	Peter