7487238c5f
This adds support for the TOACODEC found in Amlogic SM1 SoCs. The bits are shifted for more selection of clock sources, so this only maps the same support for G12A to the SM1 bits. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210511074829.4110036-3-narmstrong@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
358 lines
11 KiB
C
358 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// Copyright (c) 2020 BayLibre, SAS.
|
|
// Author: Jerome Brunet <jbrunet@baylibre.com>
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/module.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/reset.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dai.h>
|
|
|
|
#include <dt-bindings/sound/meson-g12a-toacodec.h>
|
|
#include "axg-tdm.h"
|
|
#include "meson-codec-glue.h"
|
|
|
|
#define G12A_TOACODEC_DRV_NAME "g12a-toacodec"
|
|
|
|
#define TOACODEC_CTRL0 0x0
|
|
#define CTRL0_ENABLE_SHIFT 31
|
|
#define CTRL0_DAT_SEL_SM1_MSB 19
|
|
#define CTRL0_DAT_SEL_SM1_LSB 18
|
|
#define CTRL0_DAT_SEL_MSB 15
|
|
#define CTRL0_DAT_SEL_LSB 14
|
|
#define CTRL0_LANE_SEL_SM1 16
|
|
#define CTRL0_LANE_SEL 12
|
|
#define CTRL0_LRCLK_SEL_SM1_MSB 14
|
|
#define CTRL0_LRCLK_SEL_SM1_LSB 12
|
|
#define CTRL0_LRCLK_SEL_MSB 9
|
|
#define CTRL0_LRCLK_SEL_LSB 8
|
|
#define CTRL0_LRCLK_INV_SM1 BIT(10)
|
|
#define CTRL0_BLK_CAP_INV_SM1 BIT(9)
|
|
#define CTRL0_BLK_CAP_INV BIT(7)
|
|
#define CTRL0_BCLK_O_INV_SM1 BIT(8)
|
|
#define CTRL0_BCLK_O_INV BIT(6)
|
|
#define CTRL0_BCLK_SEL_SM1_MSB 6
|
|
#define CTRL0_BCLK_SEL_MSB 5
|
|
#define CTRL0_BCLK_SEL_LSB 4
|
|
#define CTRL0_MCLK_SEL GENMASK(2, 0)
|
|
|
|
#define TOACODEC_OUT_CHMAX 2
|
|
|
|
struct g12a_toacodec {
|
|
struct regmap_field *field_dat_sel;
|
|
struct regmap_field *field_lrclk_sel;
|
|
struct regmap_field *field_bclk_sel;
|
|
};
|
|
|
|
struct g12a_toacodec_match_data {
|
|
const struct snd_soc_component_driver *component_drv;
|
|
struct reg_field field_dat_sel;
|
|
struct reg_field field_lrclk_sel;
|
|
struct reg_field field_bclk_sel;
|
|
};
|
|
|
|
static const char * const g12a_toacodec_mux_texts[] = {
|
|
"I2S A", "I2S B", "I2S C",
|
|
};
|
|
|
|
static int g12a_toacodec_mux_put_enum(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component =
|
|
snd_soc_dapm_kcontrol_component(kcontrol);
|
|
struct g12a_toacodec *priv = snd_soc_component_get_drvdata(component);
|
|
struct snd_soc_dapm_context *dapm =
|
|
snd_soc_dapm_kcontrol_dapm(kcontrol);
|
|
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
|
|
unsigned int mux, reg;
|
|
|
|
mux = snd_soc_enum_item_to_val(e, ucontrol->value.enumerated.item[0]);
|
|
regmap_field_read(priv->field_dat_sel, ®);
|
|
|
|
if (mux == reg)
|
|
return 0;
|
|
|
|
/* Force disconnect of the mux while updating */
|
|
snd_soc_dapm_mux_update_power(dapm, kcontrol, 0, NULL, NULL);
|
|
|
|
regmap_field_write(priv->field_dat_sel, mux);
|
|
regmap_field_write(priv->field_lrclk_sel, mux);
|
|
regmap_field_write(priv->field_bclk_sel, mux);
|
|
|
|
/*
|
|
* FIXME:
|
|
* On this soc, the glue gets the MCLK directly from the clock
|
|
* controller instead of going the through the TDM interface.
|
|
*
|
|
* Here we assume interface A uses clock A, etc ... While it is
|
|
* true for now, it could be different. Instead the glue should
|
|
* find out the clock used by the interface and select the same
|
|
* source. For that, we will need regmap backed clock mux which
|
|
* is a work in progress
|
|
*/
|
|
snd_soc_component_update_bits(component, e->reg,
|
|
CTRL0_MCLK_SEL,
|
|
FIELD_PREP(CTRL0_MCLK_SEL, mux));
|
|
|
|
snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SOC_ENUM_SINGLE_DECL(g12a_toacodec_mux_enum, TOACODEC_CTRL0,
|
|
CTRL0_DAT_SEL_LSB,
|
|
g12a_toacodec_mux_texts);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(sm1_toacodec_mux_enum, TOACODEC_CTRL0,
|
|
CTRL0_DAT_SEL_SM1_LSB,
|
|
g12a_toacodec_mux_texts);
|
|
|
|
static const struct snd_kcontrol_new g12a_toacodec_mux =
|
|
SOC_DAPM_ENUM_EXT("Source", g12a_toacodec_mux_enum,
|
|
snd_soc_dapm_get_enum_double,
|
|
g12a_toacodec_mux_put_enum);
|
|
|
|
static const struct snd_kcontrol_new sm1_toacodec_mux =
|
|
SOC_DAPM_ENUM_EXT("Source", sm1_toacodec_mux_enum,
|
|
snd_soc_dapm_get_enum_double,
|
|
g12a_toacodec_mux_put_enum);
|
|
|
|
static const struct snd_kcontrol_new g12a_toacodec_out_enable =
|
|
SOC_DAPM_SINGLE_AUTODISABLE("Switch", TOACODEC_CTRL0,
|
|
CTRL0_ENABLE_SHIFT, 1, 0);
|
|
|
|
static const struct snd_soc_dapm_widget g12a_toacodec_widgets[] = {
|
|
SND_SOC_DAPM_MUX("SRC", SND_SOC_NOPM, 0, 0,
|
|
&g12a_toacodec_mux),
|
|
SND_SOC_DAPM_SWITCH("OUT EN", SND_SOC_NOPM, 0, 0,
|
|
&g12a_toacodec_out_enable),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget sm1_toacodec_widgets[] = {
|
|
SND_SOC_DAPM_MUX("SRC", SND_SOC_NOPM, 0, 0,
|
|
&sm1_toacodec_mux),
|
|
SND_SOC_DAPM_SWITCH("OUT EN", SND_SOC_NOPM, 0, 0,
|
|
&g12a_toacodec_out_enable),
|
|
};
|
|
|
|
static int g12a_toacodec_input_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct meson_codec_glue_input *data;
|
|
int ret;
|
|
|
|
ret = meson_codec_glue_input_hw_params(substream, params, dai);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* The glue will provide 1 lane out of the 4 to the output */
|
|
data = meson_codec_glue_input_get_data(dai);
|
|
data->params.channels_min = min_t(unsigned int, TOACODEC_OUT_CHMAX,
|
|
data->params.channels_min);
|
|
data->params.channels_max = min_t(unsigned int, TOACODEC_OUT_CHMAX,
|
|
data->params.channels_max);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops g12a_toacodec_input_ops = {
|
|
.hw_params = g12a_toacodec_input_hw_params,
|
|
.set_fmt = meson_codec_glue_input_set_fmt,
|
|
};
|
|
|
|
static const struct snd_soc_dai_ops g12a_toacodec_output_ops = {
|
|
.startup = meson_codec_glue_output_startup,
|
|
};
|
|
|
|
#define TOACODEC_STREAM(xname, xsuffix, xchmax) \
|
|
{ \
|
|
.stream_name = xname " " xsuffix, \
|
|
.channels_min = 1, \
|
|
.channels_max = (xchmax), \
|
|
.rate_min = 5512, \
|
|
.rate_max = 192000, \
|
|
.formats = AXG_TDM_FORMATS, \
|
|
}
|
|
|
|
#define TOACODEC_INPUT(xname, xid) { \
|
|
.name = xname, \
|
|
.id = (xid), \
|
|
.playback = TOACODEC_STREAM(xname, "Playback", 8), \
|
|
.ops = &g12a_toacodec_input_ops, \
|
|
.probe = meson_codec_glue_input_dai_probe, \
|
|
.remove = meson_codec_glue_input_dai_remove, \
|
|
}
|
|
|
|
#define TOACODEC_OUTPUT(xname, xid) { \
|
|
.name = xname, \
|
|
.id = (xid), \
|
|
.capture = TOACODEC_STREAM(xname, "Capture", TOACODEC_OUT_CHMAX), \
|
|
.ops = &g12a_toacodec_output_ops, \
|
|
}
|
|
|
|
static struct snd_soc_dai_driver g12a_toacodec_dai_drv[] = {
|
|
TOACODEC_INPUT("IN A", TOACODEC_IN_A),
|
|
TOACODEC_INPUT("IN B", TOACODEC_IN_B),
|
|
TOACODEC_INPUT("IN C", TOACODEC_IN_C),
|
|
TOACODEC_OUTPUT("OUT", TOACODEC_OUT),
|
|
};
|
|
|
|
static int g12a_toacodec_component_probe(struct snd_soc_component *c)
|
|
{
|
|
/* Initialize the static clock parameters */
|
|
return snd_soc_component_write(c, TOACODEC_CTRL0,
|
|
CTRL0_BLK_CAP_INV);
|
|
}
|
|
|
|
static int sm1_toacodec_component_probe(struct snd_soc_component *c)
|
|
{
|
|
/* Initialize the static clock parameters */
|
|
return snd_soc_component_write(c, TOACODEC_CTRL0,
|
|
CTRL0_BLK_CAP_INV_SM1);
|
|
}
|
|
|
|
static const struct snd_soc_dapm_route g12a_toacodec_routes[] = {
|
|
{ "SRC", "I2S A", "IN A Playback" },
|
|
{ "SRC", "I2S B", "IN B Playback" },
|
|
{ "SRC", "I2S C", "IN C Playback" },
|
|
{ "OUT EN", "Switch", "SRC" },
|
|
{ "OUT Capture", NULL, "OUT EN" },
|
|
};
|
|
|
|
static const struct snd_kcontrol_new g12a_toacodec_controls[] = {
|
|
SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL, 3, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new sm1_toacodec_controls[] = {
|
|
SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL_SM1, 3, 0),
|
|
};
|
|
|
|
static const struct snd_soc_component_driver g12a_toacodec_component_drv = {
|
|
.probe = g12a_toacodec_component_probe,
|
|
.controls = g12a_toacodec_controls,
|
|
.num_controls = ARRAY_SIZE(g12a_toacodec_controls),
|
|
.dapm_widgets = g12a_toacodec_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(g12a_toacodec_widgets),
|
|
.dapm_routes = g12a_toacodec_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(g12a_toacodec_routes),
|
|
.endianness = 1,
|
|
.non_legacy_dai_naming = 1,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver sm1_toacodec_component_drv = {
|
|
.probe = sm1_toacodec_component_probe,
|
|
.controls = sm1_toacodec_controls,
|
|
.num_controls = ARRAY_SIZE(sm1_toacodec_controls),
|
|
.dapm_widgets = sm1_toacodec_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(sm1_toacodec_widgets),
|
|
.dapm_routes = g12a_toacodec_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(g12a_toacodec_routes),
|
|
.endianness = 1,
|
|
.non_legacy_dai_naming = 1,
|
|
};
|
|
|
|
static const struct regmap_config g12a_toacodec_regmap_cfg = {
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
};
|
|
|
|
static const struct g12a_toacodec_match_data g12a_toacodec_match_data = {
|
|
.component_drv = &g12a_toacodec_component_drv,
|
|
.field_dat_sel = REG_FIELD(TOACODEC_CTRL0, 14, 15),
|
|
.field_lrclk_sel = REG_FIELD(TOACODEC_CTRL0, 8, 9),
|
|
.field_bclk_sel = REG_FIELD(TOACODEC_CTRL0, 4, 5),
|
|
};
|
|
|
|
static const struct g12a_toacodec_match_data sm1_toacodec_match_data = {
|
|
.component_drv = &sm1_toacodec_component_drv,
|
|
.field_dat_sel = REG_FIELD(TOACODEC_CTRL0, 18, 19),
|
|
.field_lrclk_sel = REG_FIELD(TOACODEC_CTRL0, 12, 14),
|
|
.field_bclk_sel = REG_FIELD(TOACODEC_CTRL0, 4, 6),
|
|
};
|
|
|
|
static const struct of_device_id g12a_toacodec_of_match[] = {
|
|
{
|
|
.compatible = "amlogic,g12a-toacodec",
|
|
.data = &g12a_toacodec_match_data,
|
|
},
|
|
{
|
|
.compatible = "amlogic,sm1-toacodec",
|
|
.data = &sm1_toacodec_match_data,
|
|
},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, g12a_toacodec_of_match);
|
|
|
|
static int g12a_toacodec_probe(struct platform_device *pdev)
|
|
{
|
|
const struct g12a_toacodec_match_data *data;
|
|
struct device *dev = &pdev->dev;
|
|
struct g12a_toacodec *priv;
|
|
void __iomem *regs;
|
|
struct regmap *map;
|
|
int ret;
|
|
|
|
data = device_get_match_data(dev);
|
|
if (!data) {
|
|
dev_err(dev, "failed to match device\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
ret = device_reset(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
regs = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(regs))
|
|
return PTR_ERR(regs);
|
|
|
|
map = devm_regmap_init_mmio(dev, regs, &g12a_toacodec_regmap_cfg);
|
|
if (IS_ERR(map)) {
|
|
dev_err(dev, "failed to init regmap: %ld\n",
|
|
PTR_ERR(map));
|
|
return PTR_ERR(map);
|
|
}
|
|
|
|
priv->field_dat_sel = devm_regmap_field_alloc(dev, map, data->field_dat_sel);
|
|
if (IS_ERR(priv->field_dat_sel))
|
|
return PTR_ERR(priv->field_dat_sel);
|
|
|
|
priv->field_lrclk_sel = devm_regmap_field_alloc(dev, map, data->field_lrclk_sel);
|
|
if (IS_ERR(priv->field_lrclk_sel))
|
|
return PTR_ERR(priv->field_lrclk_sel);
|
|
|
|
priv->field_bclk_sel = devm_regmap_field_alloc(dev, map, data->field_bclk_sel);
|
|
if (IS_ERR(priv->field_bclk_sel))
|
|
return PTR_ERR(priv->field_bclk_sel);
|
|
|
|
return devm_snd_soc_register_component(dev,
|
|
data->component_drv, g12a_toacodec_dai_drv,
|
|
ARRAY_SIZE(g12a_toacodec_dai_drv));
|
|
}
|
|
|
|
static struct platform_driver g12a_toacodec_pdrv = {
|
|
.driver = {
|
|
.name = G12A_TOACODEC_DRV_NAME,
|
|
.of_match_table = g12a_toacodec_of_match,
|
|
},
|
|
.probe = g12a_toacodec_probe,
|
|
};
|
|
module_platform_driver(g12a_toacodec_pdrv);
|
|
|
|
MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
|
|
MODULE_DESCRIPTION("Amlogic G12a To Internal DAC Codec Driver");
|
|
MODULE_LICENSE("GPL v2");
|