407d1a5192
The PCI endpoint device such as Xilinx Alveo PCI card maps the register spaces from multiple hardware peripherals to its PCI BAR. Normally, the PCI core discovers devices and BARs using the PCI enumeration process. There is no infrastructure to discover the hardware peripherals that are present in a PCI device, and which can be accessed through the PCI BARs. Apparently, the device tree framework requires a device tree node for the PCI device. Thus, it can generate the device tree nodes for hardware peripherals underneath. Because PCI is self discoverable bus, there might not be a device tree node created for PCI devices. Furthermore, if the PCI device is hot pluggable, when it is plugged in, the device tree nodes for its parent bridges are required. Add support to generate device tree node for PCI bridges. Add an of_pci_make_dev_node() interface that can be used to create device tree node for PCI devices. Add a PCI_DYNAMIC_OF_NODES config option. When the option is turned on, the kernel will generate device tree nodes for PCI bridges unconditionally. Initially, add the basic properties for the dynamically generated device tree nodes which include #address-cells, #size-cells, device_type, compatible, ranges, reg. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://lore.kernel.org/r/1692120000-46900-3-git-send-email-lizhi.hou@amd.com Signed-off-by: Rob Herring <robh@kernel.org>
44 lines
1.3 KiB
Makefile
44 lines
1.3 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Makefile for the PCI bus specific drivers.
|
|
|
|
obj-$(CONFIG_PCI) += access.o bus.o probe.o host-bridge.o \
|
|
remove.o pci.o pci-driver.o search.o \
|
|
pci-sysfs.o rom.o setup-res.o irq.o vpd.o \
|
|
setup-bus.o vc.o mmap.o setup-irq.o
|
|
|
|
obj-$(CONFIG_PCI) += msi/
|
|
obj-$(CONFIG_PCI) += pcie/
|
|
|
|
ifdef CONFIG_PCI
|
|
obj-$(CONFIG_PROC_FS) += proc.o
|
|
obj-$(CONFIG_SYSFS) += slot.o
|
|
obj-$(CONFIG_ACPI) += pci-acpi.o
|
|
endif
|
|
|
|
obj-$(CONFIG_OF) += of.o
|
|
obj-$(CONFIG_PCI_QUIRKS) += quirks.o
|
|
obj-$(CONFIG_HOTPLUG_PCI) += hotplug/
|
|
obj-$(CONFIG_PCI_ATS) += ats.o
|
|
obj-$(CONFIG_PCI_IOV) += iov.o
|
|
obj-$(CONFIG_PCI_BRIDGE_EMUL) += pci-bridge-emul.o
|
|
obj-$(CONFIG_PCI_LABEL) += pci-label.o
|
|
obj-$(CONFIG_X86_INTEL_MID) += pci-mid.o
|
|
obj-$(CONFIG_PCI_SYSCALL) += syscall.o
|
|
obj-$(CONFIG_PCI_STUB) += pci-stub.o
|
|
obj-$(CONFIG_PCI_PF_STUB) += pci-pf-stub.o
|
|
obj-$(CONFIG_PCI_ECAM) += ecam.o
|
|
obj-$(CONFIG_PCI_P2PDMA) += p2pdma.o
|
|
obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
|
|
obj-$(CONFIG_VGA_ARB) += vgaarb.o
|
|
obj-$(CONFIG_PCI_DOE) += doe.o
|
|
obj-$(CONFIG_PCI_DYNAMIC_OF_NODES) += of_property.o
|
|
|
|
# Endpoint library must be initialized before its users
|
|
obj-$(CONFIG_PCI_ENDPOINT) += endpoint/
|
|
|
|
obj-y += controller/
|
|
obj-y += switch/
|
|
|
|
subdir-ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
|